SPL REPAIR TO ROOF TREATMENT AND OTHER MISC B/R WORK BLDG. NO 114 AND BLDG. NO 116 UTILISED FOR STATION FACILITY UNDER GE E / M LUCKNOW

Amount

Demolition of existing roof treatment of any type, including screed bed etc complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:4 over RCC roof slab including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and directed by Engineer-in-Charge. Note:- WPC will be measured and paid separately

Supply only liquid water proofing compound.

M&L for water proofing treatment on roof surfaces in the following manner:- (a) Prepair the surface and applying one coat hot bitumen grade 30 / 40, confirming to IS-73 @ 1.20 kg / sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr /sqm. (b) Supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch application with a side lap of 10 cm & 15 cm end lap weinghing not less than 3.5 kg / sqm. Note: - (i) Work to be carried out through authorised applicators of the manufactures and work will be carried out in complete / in patches in roofs. (ii) Contractor shall submit written gurantee of 10 years from date of completion & submit security deposit @ 2.5% of executed amout or Rs 6250.00 which ever is more.

M&L for applying two coats of aluminium paint over APP membrain including preparation of surfaces and apply one caot primer.

M&L for 40 mm thick brick tiles laid over and including 15 mm thick screed bed in cement mortar in 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water all as specified and directed.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces including mixing only water proofing compound as per manufacturers instruction and finishing the surface even and smooth without using extra cement complete all as specified. Note:- Waterproofing compound will be measured and paid seperatly.

M&L for preparation of new plastered surface of walls and applying two coats exterior emulsion weather coat paint of make Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac) over one coat primer complete all as specified and directed.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Preparation of newly plastered surfaces of walls and applying two coat of oil bound disemper over one coat of primer over and including 3 mm thick cement base wall care putty all as specified.

M&L for 3 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement.

M&L for preparation of new plastered surface of ceiling and applying three coats white wash all as specified and directed.

M&L for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement, wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thick in two coats, using polymer @ 10 to15% by weight of cement complete & finally finishing the surface all as specified and directed. Make : Dr. Fixit / Sunanda / chemestik / Fosrok. Note :-New reinforcement will be measured and paid separately.

S&F false ceiling of E-board of size 600 x 600 x 4 mm thick, white prelaminated seif embossed reinforced designer ceiling board tiles of approved texture at all height including snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with galvanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) including dismantling of existing ceiling, complete all as specified directed by the Engineer-in-Charge

M&L for seamless ceiling comprising of Gypsum Board 12 mm thick in ceiling fixed with screw or as per manufacturers instructions, with necessary jointing and taping, and applying two coat oil bound distemper over one coat primer fixed over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including applying 2 coat distemper oil emulsion over 2 mm thick cement base putty including dismantling of existing ceiling, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for.

M&L for providing precast cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregates) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wallin), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match including set in CM 1:4

M&L for RCC 1:2:4, type B1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns or floors / roofs beams, landings, balconies, canopies, deck slabs, shelves and chajja and the like complete all as directed.

M&L for RCC 1:2:4, type B1, using 20 mm graded stone aggregate as in fins, fascias, louvres, parapets, and railings exc. 60 cm in height, newels, balustrade, and the like complete all as directed.

Use & waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat Rough finished surfaces of concrete complete all as directed.

Use & waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) flat Rough finished surfaces of concrete complete all as directed.

Use & waste formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, flat Rough finished surfaces of concrete complete all as directed.

M&L for steel reinforcement of TMT bars (Fe-500 Grade) 10 mm dia and over cut to length and bent to shape required including cranking bending spirally, hooking end and binding with mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips all as specified and directed.

M&L for steel reinforcement of TMT bars (Fe-500 Grade) 6 to 8 mm dia cut to length and bent to shape required including cranking bending spirally, hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for steel reinforcement of TMT bars (Fe-500 Grade) not exc 10 mm dia as in stirrups cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries from site.

M&L for non skid ceramic tiles 7-8 mm thick (square or rectangular) polished area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15 mm thick screed in CM 1:6 complete all as specified and directed by Engineer-in-Charge Note : Quoted rate shall be deemed to include cast of screed bed.

M&L for for coloured glazed ceramic tiles in vertical surfaces of size 450 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of backing coat.

M&L for colour dark shed, vitrified ceramic tiles 10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the tiles over and including 15 mm thick scree bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of screed bed.

All as per item No. 30 above but as in skirting laid over and including 10 mm thick rendering in CM. 1:4 as backing coat etc complete.

Dismantling stone slab and tiles of any description or and thickness in floors, aprons etc laid dry or laid bedded and pointed in any mortar complete all as specified and directed.

M &L for 18 to 20 mm thick machine cut & machine polished Kota stone slab as in flooring, with marble stone strips as per design approved, laid over and including 15 mm thick cement screed base in CM 1:6, laid, jointed & pointed with grey cement slurry including rubbing and mirror polishing complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of screed bed.

M&L for 12-15 mm thick machine cut Kota stone slab as in skirting / riser set and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including backing coat 10 mm thick in CM 1:3 complete all as specified and directed by Engineer-in-Charge Note : Quoted rate shall be deemed to include cast of backnig coat.

Material and labour grinding and polishing of existing of Kota stone / terrazzo tiles flooring polished up to mirror finish including appling bees wax polish by machine complete all as specified & directed.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including half round molding of exposed edge, laid over and including screed bed 15 mm thick in cement mortor 1:4 complete all as specified and directed. Note : Quoted rate shall be deemed to include cast of screed bed.complete all as specified.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Supply and lay 15 mm bore GI tubing, medium grade including all fittings like sockets, elbows, bends, Tees, unions, short pieces etc. fixed to wall complete all as specified and directed.

Supply and lay 20 mm bore GI tubing, medium grade including all fittings like sockets, elbows, bends, Tees, unions, short pieces etc. fixed to wall complete all as specified and directed.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, including all connection complete.

Supply and fix in repairs 10 Litre capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including brackets, waste fittings , brass Chromium plated for glazed basins etc. embedded in red lead cement, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified.

Supply and fix in repair white vitreous China, under counter wash hand basin, oval shape, of size 190 x 550 x 425 mm fixed in stone slab counter by making suitable size hole, supply & fix new brackets, 32 mm size brass chromium plated waste coupling, Brass chromium plated bottle traps, complete, all as specified & directed. Note:- Stone slab counter will be measured & paid separately.

S&F in repair vitreous china urinals, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) white, with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing of flush pipe, grating and Union for discharge pipe complete all as directed.

S&F 32 mm bore flexible pipe of PVC fixed to WHB / urinals as waste pipe (not less than 600mm) including PVC coupling complete all as specified.

S&F in repair 15 mm size concealed stop cock, cast copper alloy, chromium plated , screwed both end for iron pipes, fancy type with capstan head, screwed down, complete.

S&F in repair 15 mm size Angle valve, cast copper alloy, chromium plated, fancy type with capstan head, with screwed down, screwed both end for iron pipes complete.

S&F in repair 15 mm size pillar taps, cast copper alloy, chromium plated, fancy type, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repairs two way bib tap, cast copper alloy chromium plated with quarter turn, fancy type with long body, with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

S&F in repairs Hand Shower 105 mm dia, round shape, single flow with Air Effect (ABS Body & Face Plate Chrome Plated, with Rubit Cleaning System including 1 metre long flexible pipe fixed to to 15mm bore GI pipes.

S&F in repairs overhead shower of 100 mm dia round shape single flow (ABS Body Chrome Plated with Gray Face Plate) with rubit cleaning system complete all as specified and as directed

S&F in repairs 15 mm size wall mixer with telephonic shower for mixing hot & cold water, cast copper alloy chromium plated with, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair Tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair for stainless steel chrominium plated towel ring of circular / oval / rectangular shape with complete fixing arrangments to wall

S&F for corner sheet glass shelf of 4.8mm thick fixed with Stainless steel clamps and other necessary fittings suitable for holding in wall corner with minimum 200 mm length in front circular shape, complete all as specified and directed by Engineer-in-Charge.

S&F for sheet glass shelf of 4.8mm thick fixed with Stainless steel clamps and other necessary fittings suitable for holding in wall of minimum size 300x150mm , complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.

S&F in repairs mild steel chromium plated gratings suitable for 75 / 100 mm dia for NT/ FT complete all as specified.

Taking down PVC (SWR) pipes (any sizes) incl all fittings

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, or fixed to wall

M&L for preparation of old decorated surfaces of walls by washing, rubbing down & stopping etc, and applying two coats of distemper oil emulsion of any tint / shade all as specified.

M&L for preparation of old decorated surfaces of ceiling by washing, rubbing down & stopping etc, and applying two coats of distemper oil emulsion of any tint / shade all as specified.

M&L preparation of old painted surface of walls and applying one coat exterior emulsion weather coat paint of Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac) complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint all as specified.

M&L for applying two coats of synthetic varnish over old wooden surfaces including preparation of surfaces complete all as specified and directed

M&L for preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, and applying one coat of synthetic enamel paint all as specified.

Rakesh Traders (BID ID -3126417)

M R CONSTRUCTION (BID ID -3135303)

H R ENGINEERS (BID ID -3126079)

M/S SHIVA CONSTRUCTION (BID ID -3126866)

m/s raghubar dayal (BID ID -3135127)

M/S KAUSHIK CONSTRUCTION (BID ID -3134858)