Establishing of 2x160MVA, 220/110kV and 1x10MVA, 110/11kV Substation at Chadchan (Devar Nimbaragi) in Chadachan taluk, Vijayapura district with KIOSK based arrangement along with construction of associated 220kV transmission line for a distance of 29.628Km and 110kV Lines for a distance of 60.78km along with construction of 2 Nos of 220kV terminal bays and 05 Nos of 110kV terminal bays on Partial Turnkey basis

Karnataka Power Transmission Corporation Limited

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

TECHNO - COMMERCIAL SHEETS

NOTE* For detailed scope of the work please refer Bid Documents.

BIDDERS TO READ CAREFULLY

THE FOLLOWING DOCUMENTS [DULY SIGNED BY AUTHORISED PERSON, WHEREVER NECESSARY] ARE TO BE UPLOADED AND BANK GUARANTEE/INSURANCE SURETY BOND TOWARDS EMD OVER AND ABOVE RS.1.00LAKH AS PER ANNEXURE-II OF THE BID DOCUMENT SHALL BE SENT IN ORIGINAL TO CHIEF ENGINEER ELECTY., (T&P), KPTCL, BENGALURU SO AS TO REACH THIS OFFICE AFTER THE LAST DATE OF SUBMISSION OF BID AND ON OR BEFORE THE DATE & TIME NOTIFIED FOR OPENING OF TECHNO COMMERCIAL BIDS, FAILING WHICH THE BID WILL NOT BE OPENED. 1) NO DEVIATION CERTIFICATE (SCHEDULE-16). 2) EMD/BID SECURITY AS DETAILED IN CLAUSE NO. 13 of ITT. 3) BANK GUARANTEE issued either by a Nationalized/Scheduled Bank OR INSURANCE SURETY BOND issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDA) TOWARDS BALANCE EMD/BID SECURITY. (For the balance EMD above Rs. 1.00Lakhs) (SCHEDULE-17) - as detailed in Clause No. 13 of ITT-The Bidder shall scan the Bank Guarantee/INSURANCE SURETY BOND towards EMD and upload the same in the prescribed format in the slot specified for “EMD and Tender Fee Payments” in the e-procurement portal to enable the owner for verification of EMD BG/ISB at the time of opening of Techno Commercial Bid, failing which the offer will be rejected. 4) LETTER OF UNDERTAKING (SCHEDULE-18). 5) CONSORTIUM AGREEMENT (IF APPLICABLE-SCHEDULE-19) 6) POWER OF ATTORNEY (SCHEDULE- 20). 7) ANY OTHER AGREEMENTS /UNDERTAKINGS/SELF DECLARATIONS SPECIFIED IN THE TENDER.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

BID PROPOSAL SHEET

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. :

Bid Proposal Reference :

Person to be contacted :

E-Mail Address:

The Chief Engineer, Electricity,

Tendering & Procurement, KPTCL,

Indhana Bhavana, Bangalore - 560 009.

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

a) * We have submitted bid as individual Bidder. (Indicate Name of the Individual Bidder)

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium)

Name of the Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

1 We, the undersigned Bidder, having read and examined in detail the specifications and all the Bidding documents of the said work and hereby propose to design, manufacture/fabricate, shop test, supply on FOR site basis, and carry out the erection, testing and commissioning including civil, structural and architectural works for

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

2 PRICES AND VALIDITY :

2.1 We declare that the Prices stated in our Proposal are in accordance with subject Bid Documents (including Clause No.40 of "Conditions of Contract (CC)" & Clause No.12 of Instruction to Tenderers (ITT) of Bid Documents. We further declare that all Ex-works price/CIF components of Spares, Maintenance and Testing Equipments and other charges viz., Freight and Insurance, Type Test charges and other charges stated in our proposal shall be as per the Tender conditions. All the Price and other terms and conditions of this Proposal are valid during the Performance of the Contract.

2.2 All Duties, such as Custom Duties on imports, Levies, Surcharge/Cess etc., if any applicable on the transaction excluding GST are included in the Bid Price and shall be to Our account and the Owner is not having any liability whatsoever on this account, whatever may be the contrary elsewhere in the Bid documents. However the component of Duties included in the Bid Price are separately indicated in Schedule - 2 for TDS purpose. We further confirm that our Bid Prices as quoted in Schedule-I, include all import Duties and levies including Licence fees lawfully payable by us on imported items and all other Duties and Levies applicable on Bought-out Components, Materials, Equipment and other items and confirm that any such Duties and Levies additionally payable shall be to our account. We further confirm that, no Sales Tax in any form shall be payable by Owner either for Bought-out items which are despatched by our Sub-Suppliers directly to the Project Site or for items Supplied directly by us. We confirm that, the Prices quoted by us are excluding GST.

2.3 We declare that we have noted and considered Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents regarding Taxes and Duties and quoted our Prices accordingly. We further agree for TDS as per Statutory stipulations.

2.4 The Bid Prices, the Price components of the various items in our Scope of Supply, Erection including Testing & Commisisoning, Civil and Mandatory spares is quoted in Percentage rate Financial Bid in KPP Portal for this proposal..

3 CONSTRUCTION OF THE CONTRACT : We, declare that we are making the Offer on the basis of Single Contract for the entire Scope of the Package in accordance with Clause No.26.2 of Instruction to Tenderers (ITT) of Bid Document.

4 We having studied Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents , relating to Tax and we hereby, declare that if any income-tax, surcharge on income tax or any other corporate tax is attracted under the law, we agree to pay the same.

5 Bid Security/ EMD : We have enclosed a Bid Security through e-Payment mode for a sum of Rs.1.00Lakhs and remaining amount of Rs..........Lakhs ( above Rs.1.00 Lakhs) in the form of Insurance Surety Bond (ISB) issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDAI) OR in the form of Bank Guarantee in original valid for a period of 225 days from last date of bid submission and liable to be forfeited in accordance with Bid Documents. (Mode of Payment towards EMD is as detailed in CLAUSE NO. 13 of ITT & Clause No. 5 of NIT)

We have also ensured that the above Bid Guarantee furnished by us is in line with the Bid Documents and complete in respect of following :

1. Value of Non judicial Stamp Paper purchased in the name of executing Bank is as per Stamp Act.

2. Power of Attorney Number and Date as well as Signature and Full Name and Designation of Executant along with Bank's Stamp are there.

3. Signature, Full Name, Designation and address of Witness are there.

4. Completed Mailing address of the Head Office of the Bank is indicated.

6.1 We declare that the Works shall be performed strictly in accordance with the Specifications and Documents except for the variations and Deviations, all of which have been detailed out exhaustively in the following Schedules, irrespective of whatever has been stated to the contrary anywhere else in our Proposal.

a Commercial Deviations Schedule Schedule - 5

b Technical Deviations Schedule Schedule - 6

6.2 We further confirm that Specified Stipulation of following Clauses are acceptable to us and No Deviation / Exceptions are taken on any account whatsoever in the following Clauses.

a. Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b. EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c. Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d. Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e. Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f. Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g. Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h. Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

Further, we agree that additional conditions, if any, found in the Proposal Documents other than those stated in Deviation Schedules, save that pertaining to any rebates offered, shall not be given effect to.

7 PERFORMANCE GUARANTEE ; We declare that the ratings and performance figures of the equipment to be supplied and erected by us are guaranteed. The Guaranteed particulas of different equiment in our Scope are enclosed in Data Requirement Sheets.

8 BID PRICING : We further, declare that the Prices stated in our Proposal are in accordance with your ITT & SCC & all other relevant clauses of Bid Documents.

9 PRICE ADJUSTMENT : We declare that the Prices quoted by us are in accordance Clause No. 40 of Section-5 :Conditions of Contract (CC)

10 SPECIAL TOOLS AND TACKLES : We have given a list of Special Tools and Tackles in Schedule - 7 and Prices thereof are included in our lumpsum Bid Price. We further agree that any items of Special Tools and Tackles, though not included in the aforesaid list, but required for effective Erection, Testing, Commissioning & Operation of the Equipments of Substations & Transmission lines shall also be furnished by us, at no extra cost to you.

11 ADDITIONAL INFORMATION : In addition to the information called for in these Proposal Sheets, we have included with this Proposal, additional information as listed in Schedule - 8. We further confirm that such additional information does not imply any additional deviation beyond those covered in Schedule - 5 & 6 and in case of any contraction between these additional information and other provisions of Bid, the later will prevail.

12 QUALIFICATION DATA : We confirm having submitted the Qualification Data, as required by you in your Bid Documents in e-Procurement Portal along with this Proposal. Further we have filled in the information for Qualification Requirements in Schedule 9. In case you require any further information in this regard, We agree to furnish the same in time.

13 WORK SCHEDULE : If this Proposal is accepted by you, we agree to submit Engineering Data, Provide Services and complete the entire Work from time to time, in accordance with Schedules indicated in the Proposal. We fully understand that the Time Schedule stipulated in this Proposal is the essence of the Contract, if awarded. The completion schedule of the various Major Key Phases of the Work is indicated in Schedule - 11.

14 CONTRACT PERFORMANCE GUARANTEE ; We further agree that if our Proposal is accepted, we shall provide an irrecoverable Contract Performance Guarantee, of value equivalent to Five percent (5%) of the Amount Put to Tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 29 of Instructions To Tenderers (ITT) of the tender valid up to the end of ninety (90) days after the end of the Contract Guarantee Period mandatorily in the form of Insurance Surety Bonds (ISBs) issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDAI) (OR) in the form of electronic Bank Guarantee (e-BG) from the Banks which are integrated with NeSL in the form attached as Annexure-III (Section 4: Formats of Annexures) in your favour in accordance with Clause 25.5 of ITT and Clause 43 of the CC (Conditions of Contract), as per the format given in Section 4 and enter into a formal agreement with you within Twenty (20) days from the date of issue of Letter of Intent to Award the Contract.

15 We, the partners of the Consortium whose Signatures are appended below, shall be liable jointly and severally for the execution of the Contract(s), in the event of Award, in accordance with the terms of Contract(s). The Lead Partner for this Bid - M/s .................................................................................... on behalf of the Consortium, is submitting the Bid. The Power of Attorney in favour of M/s .......................................................................................is enclosed.

16 BID PRICE : We declare that our lumpsum Price for the entire scope of work specified in the specifications and documents, shall be as indicated in Schedule - 1.

17 CHECK LIST : We have included a Checklist duly filled in Schedule 22

18 We, hereby, declare that only the Persons or Firms interested in this Proposal are named herein as Principals and that no other Persons are interested in the Proposal or in the Contract to be entered into, if we are awarded the Contract, and that this proposal is made without any connection with any other Person, Firm or Party likewise submitting a Proposal and that this Proposal is in all respect for and in good faith, without collusion or fraud.

19 We declare, in case our bid is accepted, that until a formal Contract is prepared & executed, this bid together with your written letter of acceptance thereof and your notification of award /Letter of Intent to Award the Contract shall constitute a binding contract between us. We further understand that you are not bound to accept the lowest or any bid you may receive.

Thanking you, we remain,

Yours faithfully,

Place Printed Name

Business Address Country of Incorporation (State or Province to be indicated)

Name and Address Principal Officer

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

We declare that in terms of Clause No. 11 of ITT, Bid documents, the following are our lumpsum price in Rupees for the entire scope of work as specified in the Specifications and Documents.( Inclusive of all Taxes (Excluding GST) & Duties).

Total Lumpsum Price : ( In Figures)

Total Lumpsum Price : ( In Figures)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 (1 of 2)-SUMMARY OF PRICE COMPONENTS

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Summary of Price Components

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

Summary price components for identified in accompanying specifications

( Name of the Work) as per the scope identified in accompanying specifications.

Sl no Description Amount in Rs. (Fill as "YES" against the above Price columns in case Prices are indicated in the Price templates)

Establishing Sub station Construction of Transmission Lines

A Material / Equipment Price (including Packing & Forwarding charges) in the Scope of the Contractor

Ex-works including all taxes & duties [As per schedules - 3A(i) for Station & 3B(i) for Line]

ii) Freight and Insurance Charges (Not Applicable) [As per schedules - 3A(i) for Station & 3B(i) for Line]

iii) Total FOR site price (i+ii)

B Mandatory spares price (including packing & forwarding charges)

Ex-works including all taxes & duties(As per schedule - 4)

ii) Freight and Insurance Charges(Not Applicable) (As per schedule -4)

iii)Total FOR site price (i + ii)

C Supply portion total FORD price [A+B]

D Erection portion:

i) Total charges for Erection, Testing & Commissioning of all Supply items [as per schedules-3A(ii) for Station, 3B(ii) for Line]

ii) Total charges for entire civil works [ as per Schedules-3C(i) for Station and 3C(ii) for Line]

iii) Total civil works, erection, Testing and commisioning charges (i)+(ii)

E Total Bid Price = C+D(iii) In figures : Rs.

Total Bid Price in Figures : Rs.

Total Bid Price in words : Rupees

Note: The erection charges shall include the charges for taking delivery at Owner's store, unloading, handling, storage, erection, testing and commissioning of all equipments and applicable GST.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 ( 2 of 2 ) - TAXES (Excluding GST), DUTIES & OTHER LEVIES

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

Fill IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

Estimates of Indian Taxes (Excluding GST), Duties and Levies included in the Total Bid Price are as follows:

SL. No. Description of Applicable Tax (Excluding GST) / Duty / Levy Establishing Sub station Construction of Transmission Lines

Rate of Tax (Excluding GST)/ Duty / Levy Amount of Taxes (Excluding GST) / Duties in Rupees Rate of Tax (Excluding GST) / Duty / Levy Amount of Taxes (Excluding GST)/ Duties in Rupees

1 Applicable taxes (Excluding GST), duties & levies prevailing as on the last date of bid submission shall be quoted

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

6 Building and other construction workers welfare Cess for Supply, Erection and Civil Portion works

8 a. Applicable Customs Duty (*) (Bidders shall also clearly indicate the breakup of Customs duty such as BCD, Cess,etc.,)

b. If there is any existing Treaty between India and the country from where the goods required for this project are proposed to be imported, then copy of the treaty shall be uploaded.

9 Other Taxes & duties if any (Specify) **

10 Other Taxes & duties if any (Specify) **

11 Total (Sum of 1 to 10)

(*) In case of CIF portion of Supply.

** Please Specify the nature of the other Taxes (Excluding GST) along with the details in the "Rate" Column.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2A : SCHEDULE OF DISCOUNT

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

We hereby offer an unconditional discount on our quoted price in Schedule 2 (1 of2) as under. Any discounts offered anywere else in Bid shall not be considered.

Sl.No Nature of Discount Establishing Sub station along with construction of associated Transmission Lines

Percentage of discount Amount (in Rs.) Remarks

I Supply Schedules

b) Freight & Insurance (Not Applicable)

II Erection Schedules

III Civil Works Schedules

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE- 2 B - STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Details of payments made in the form of Credit card/Debit card/NEFT/RTGS/OTC (over the counter) as per the tender conditions should be keyed in against column no.3 (a) . BG Amount, BG No. and date, Name and address of the bank issuing the BG, validity of the BG should be keyed in against column no. 3 (b) .

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhana Bhavana, BANGALORE - 560009.

STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

Sl. No. Particulars Details

1 Bid proposal form Uploaded.

2 No deviation certificate Uploaded.

3. a). EMD / Bid Security Bids shall be accompanied by bid security (EMD); 1) Up to Rs.1.00Lakh The following modes of payment will be provided as a part of e-Payment services. • Credit Card/Debit Card • Net Banking • NEFT/RTGS • Over-the-Counter (OTC) • IMPS For further detail regarding mode of e-payment of EMD in e-procurement platform, contact e-procurement cell, Government of Karnataka.

b). EMD amount above Rs.1.00Lakh by Bank Guarantee/Insurance Surety Bond (ISB)

4 Validity of the Bid.

5 Qualifying Requirements.

6 Financial capability

8 Taxes & Duties.

9 Completion Schedule

10 Defects Liability Period/Guarantee

11 Payment Terms

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(i): Price Breakup for-Station Supply Portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Station Supply portion :

Sl No. Name of the Equipment/Materials Unit Quantity Indicate whether "Own manufactured Item" or "Bought Out Item" Indicate country of Origin

220kV Station at 220kV S/S at Chadchan (Devar Nimbaragi) 2 nos. of 220 kV Terminal Bays at the existing 220/110 kV Indi sub-station 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station Total Qty

SS1 POWER TRANSFORMERS: a) 160MVA, 220/110/11kV Power Transformer, 3Ph, 50Hz, Core Type, 2 winding Auto Transformer star/Delta, Vector Group: Yna0d11, OLTC, bushing CT for tertiary of ratio 1616/1A, 5P20, 15VA, ONAN/ONAF/OFAF with Fan control cubicle, RTCC Panel, Numerical RTCC panel, Fibre optic temperature sensor, first filling of Oil, and 10% spare oil in non-returnable drums, etc., complete with 2x50% separate radiator bank on left side and terminal connector suitable for Moose ACSR on primary and Moose ACSR on secondary side of the transformer and neutral connectors suitable for copper flats etc., as per Technical Specifications (208MT). Note: Copper Flats required for Power Transformers shall be supplied alongwith the Transformers as per Technical Specifications. No 2 0 0 0 2

SS2 b) 10MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11,OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first filling of Oil and 10% spare oil in non-returnable drums etc., complete with Terminal connectors suitable for Single Moose ACSR on primary side of transformer and 2 nos of copper flat for each phase from LV side of Transformer to cable at 11 kV cable terminating structure with suitable support insulator on LV side of Transformer and 2 Nos of copper flats from neutral terminal to earthmat through NCT along with necessary support pin insulators, as per Technical Specifications (35MT). Note: Copper Flats required for Power Transformers shall be supplied alongwith the Transformers as per Technical Specifications. No (Supplied by KPTCL) 1 0 0 0 1

SS3 Nitrogen Injection Fire Extinguishing System: a) Supply, Erection & Testing and Commissioning of Nitrogen Injection fire extinguishing system including civil Engineering works like soak pit etc., as per the recommendaion of the supplier of the fire lighting system for Power Transformer & as per Technical Specifications. 2 sets for 160 MVA Power Transformer. Set 2 0 0 0 2

SS4 b) Supply, Erection & Testing and Commissioning of Nitrogen Injection fire extinguishing system including civil Engineering works like soak pit etc., as per the recommendations of the supplier of the fire fighting system & as per Technical Specifications. 10 MVA Power Transformers Set 1 0 0 0 1

SS5 CIRCUIT BREAKER : SF-6 Circuit Breaker with rigid bi-metallic terminal connector suitable for Moose/Twin Moose ACSR with spring / semi-pneumatic / pneumatic type operating mechanism and with mounting structure etc., as per technical specification. i) 220kV, 3150A, 50kA Class SF6 CB No 5 2 0 0 0 7

SS6 (ii) SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connectors complete suitable for Moose/ Twin Moose ACSR/Drake and mounting structures as per technical specifications. 110kV, 3150A, 40 kA Class No 11 0 0 0 11

SS7 (iii) SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connectors complete suitable for Moose/Drake ACSR and mounting structures as per technical specifications. 145kV,1250A, 40 kA Class for 110 kV line No 0 3 3 1 7

SS8 ISOLATORS : 220kV electrically cum manually operated double break type disconnects with solid core insulators, terminal connector suitable for AL. tube/Moose ACSR/Twin Moose ACSR conductor, marshalling box etc., complete as per technical specifications: 220kV, 2500A, 50kA: (For line & B/C bays) a) Upright with Earth Switch (manually operated) (LPH:5750) Nos. 2 2 0 0 0 4

SS9 b) Upright without earth Switch i)Live Point Height 8250mm Nos. 6 4 0 0 0 10

SS10 ii)Live Point Height 5750mm Nos. 2 2 0 0 0 4

SS11 iii) Under hung without earth switch Note:Terminal connectors for Isolators : For TB at Indi Rigid type suitable for Twin Moose ACSR conductor - 48 Nos Flexible type suitable for 63mm Al pipe - 12Nos Nos. 2 2 0 0 0 4

SS12 II) 220 kV, 1250A, 50kA for 160MVA Power Transformer Bays, Line Bays & PT Bays at 220kV Chadchan a) Upright mounting type without Earth Switch LPH 8250mm Set 6 0 0 0 6

SS13 c) Upright mounting type without Earth Switch LPH 5750mm Set 4 0 0 0 4

SS14 d) Underhung mounting type without Earth Switch Set 2 0 0 0 2

SS15 III) 110kV class Isolators: At proposed 220kV chadchan S/S 110kV, double break electrically cum manually operated isolators with solid core insulator, terminal connector suitable for Al. tube/Moose ACSR/Twin Moose ACSR conductor, marshalling box etc., complete as per technical specification. 1) 110kV, 1250A, 40kA: (For line, 110/11kV Tr. & PT Bays) a)Upright mounting type with manually operated Earth switch LPH 4600mm Set 7 0 0 0 7

SS16 b)Upright mounting type without Earth switch LPH 6350mm Set 18 0 0 0 18

SS17 c)Upright mounting type without Earth switch LPH 4600mm. Set 7 0 0 0 7

SS18 d)Underhung Mounting without earth switch Set 7 0 0 0 7

SS19 2) 110kV, 2000A, 40kA: (for 110kV side of 220/110kV Trf and B/C bays) Upright without Earth Switch a) Live Point Height 6350mm Set 6 0 0 0 6

SS20 c) Upright mounting type without Earth switch LPH 4600mm. Nos. 4 0 0 0 4

SS21 d)Underhung Mounting without earth switch Nos. 2 0 0 0 2

SS22 3)110KV, 1250A, 40KA Class Double Break Manually operated isolator with with solid core insulator, terminal connectors suitable for Moose/Drake ACSR/75 mm pipe/63 mm pipe marshalling box etc., complete as per technical specification. At 110kV Dhulkhed S/S: a) Upright mounting type with Earth switch Live point height 4600mm (Suitable for 8.2M bay width) At 110kV Jigajevanagi S/S: a) Upright mounting type with Earth switch Live point height 4600mm (Suitable for 8.2M bay width) Set 0 2 2 1 5

SS23 b)Upright mounting type without Earth switch Live point height 4600mm (Suitable for 10.4m bay width for Dhulkhed S/s & 8.2M bay width for Jigajevanagi ) Terminal connectors for Isolators for Dhulkhed TB : Rigid type suitable for Moose ACSR- 18 Nos Flexible type suitable for 50mm Al.pipe -3 Nos Flexible type suitable for 63mm Al.pipe - 3 Nos Terminal connectors for Isolators for Jigajevanagi : Rigid type suitable for Moose ACSR- 18 Nos Flexible type suitable for 50mm Al.pipe -3 Nos Flexible type suitable for 63mm Al.pipe - 3 Nos Set 0 2 2 1 5

SS24 CURRENT TRANSFORMERS : Current transformers including marshalling boxes, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose/Twin Moose ACSR conductor as per technical specifications. For Chadchan S/s 1)220kV, 50kA CT of Ratio 1600-1000-800/1-1-1A with additional 2 Cores of 1200/1A Type-1 (2 nos. main CT is used as NCT) (for 160MVA Transformer bays) No 17 17

SS25 For 220kV Indi TB 220kV, 50kA CT of Ratio 1200-800-600-300/1-1-1A (Required for line & Bus-coupler) i)For metering:-Accuracy 0.2S, Burden 10VA ii)For Differential/ Distance Protection:PS class, Knee Point Voltage 1200V at 1200/1A, RCT 12Ohms 400V at 300/1A, Rct 3 Ohms, For Bus Bar Protection: PS Class, Knee Point Voltage 1200V at 1200/1A, Rct-12 Ohms. Note:- a) All the current transformers in each Kv Class shall be of one & the same make for interchangeability & reliabity of performance. No 6 6

SS26 2) a) 110kV, 40kA CT of Ratio 1000-800/1-1-1A (Required for 160MVA Transformer & bus coupler ) Note: Terminals connectors should be suitable for double Moose ACSR for 9Nos of main CTs For Dhulkhed TB and 110kV Jigajevanagi TB b)110 kV class, 40 KA, CT of ratio 600 -400/ 1-1-1A for Lines Core - 1 : Vk-800 V at 400A, Rct 4 ohm at 400/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No 9 6 6 3 24

SS27 3) Current transformers including marshalling boxes, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose/Drake ACSR conductor as per technical specifications. 110 kV class, 40 KA, CT of ratio 400-200/ 1-1-1A for 110/11kV Transformers Core - 1 : Vk-110 V at 600A, Rct 5 ohm at 600/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up Note: 1. All the CTs in each kV class shall be of one and the same make for inter-changeability & reliability of performance. 2. The make and characteristic of 11kV NCT should be same as that of of the incomer CT of 11kV Switch gear. 3. Terminal Connectors should be suitable for the respective CTs No. 3 3 3 0 9

SS28 4) 110kV 40kA CT of Ratio 800-400/1-1-1A, (Required for lines) No 21 0 0 0 21

SS29 5) 11 kV NCT, outdoor, 25KA, 1200-800/1-1-1A (of similar rating as incomer of 1250 A, 25 kA 11 kV Switchgear) required for 110/11kV transformer as per technical specifications Note: 1. All the CTs in each kV class shall be of one and the same make for inter-changeability & reliability of performance. 2. The make and characteristic of 11kV NCT should be same as that of of the incomer CT of 11kV Switch gear. 3. Terminal Connectors should be suitable for the respective CTs No 1 0 0 0 1

SS30 VOLTAGE TRANSFORMERS : Single phase, 3 core, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK as per technical specifications 1) 220kV Class,Ratio 220kV/√3/110V/√3- 110V/√3 No 6 0 0 6

SS31 2) 110 kV class 110kV/RT3/110V/RT3/ 110V/RT3/ 110V/RT3 Core - 1 : 300 VA, Accuracy class 0.2-Metering Core - 2 : 200 VA, Accuracy class 3P-Protection Core - 3 : 50 VA, Accuracy class 3P. Open delta No 6 0 0 6

SS32 CAPACITIVE VOLTAGE TRANSFORMERS: 245 kV CVT, 4400 pF, 1 Ph CVT with 2 secondaries, terminal connector suitable for Twin Moose ACSR conductor with marshalling box etc., complete as per technical specifications. i) 220kV CVTs of ratio 220kV/√3/110V/√3-110V/ √3/110V/√3 cores-1&2 : Protecetion 150VA,Class 3P No 6 6 0 0 0 12

SS33 SURGE ARRESTOR: Porcelain/Polymer type, with terminal connector suitable for Twin Moose ACSR conductor as per technical specifications. a. 198kV Metal Oxide with surge counter Arrestor class : Station Medium Duty (SM) - Discharge Class 3 No. 12 6 0 0 0 18

SS34 b. 96 kV, 10 KA, SM type with surge counter Arrestor class : Station Medium Duty (SM) - Discharge Class 3 Note : Surge arrestors are with surge monitors & insulating base No. 30 0 0 30

SS35 (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake ACSR as per technical specifications. c. 96 kV, 10 KA, SM type for lines Note : Surge arrestors are with surge monitors & insulating base No 0 6 6 3 15

SS36 Control and Relay & Protection Panels complete as per specifications: I. C&R Panel compatible to IEC 61850 communication protocol for Sub-station Automation System, complete as per technical specifications. 1) 220 kV Line Type 2L (as per annexure RPP1-SAS) No 2 2 0 0 4

SS37 2) 220/110/11 kV Power Transformer panel Type 2T1 (as per annexure RPP2-SAS) No 2 0 2

SS38 3) 220 kV Bus coupler panel Type 2BC (as per annexure RPP1-SAS) No 1 0 1

SS39 4) 220 kV Bus Bar Protection panel Type 2BBA (as per annexure RPP3-SAS) No 1 0 1

SS40 5) 110 kV line - Type 1L (as per annexure RPP4-SAS) No 7 7

SS41 6) 110 kV Bus coupler panel Type 1BC (as per annexure RPP6-SAS) No 1 0 1

SS42 7) 110/11 kV Transformer panel Type 1T1(as per annexure RPP5-SAS) No 1 0 1

SS43 8)11 kV line Type 11L (As per Annexure RPP7-SAS) NOTE : 1. The Accuracy class of metering core of CTs and also trivector meter of control & relay panels shall be 0.2S class and CVTs & VTs shall be 0.2 Class instead of that specified elsewhere in the respective clauses of Technical Specification of bidding documents. 2. All the panels shall be of one and the same make for uniformity and interchangeability of components. 3. The Electronic Trivector meters with ABT and DLMS features has to be provided both on the HV side and IV side of both 220/110kV & 110/11kV transformers No 4 0 4

SS44 I. Simplex type 110 V DC compatible to SCADA control and relay panels complete as per specifications. For 110 kV Transmission line-Simplex type control and relay panels complete compatible to SCADA as per specifications. No. 0 3 3 1 7

SS45 II. Sub-station Automation System including erection: Complete Sub-station Automation System including hardware and software for Sub-station and for operation from remote control centre along with associated equipment as per Annexure-SAS of Relay & Protection Panel and Sub-station Automation specification along with OFC and Ethernet switches, separate Auxiliary panel etc. Set 1 0 1

I. STATION STRUCTURES & MOUNTING STRUCTURES FOR 220kV SUB STATIONS (including Bolts & Nuts) as per Technical Specification and approved drawings: a) 220kV Side Station Structures : i) Station Structure Tower - 2T1 with peak. (1.578t per tower). (1.502t per tower for structure+ 0.076t per tower for Bolt &Nuts ) No/t 7/11.046 2/3.156 0 0 0

ii) Station Structure Tower - 2T2 with out peak.(1.325t per tower) (1.272t per tower for structure+ 0.053t per tower for Bolt &Nuts) No/t 9/11.925 2/2.65 0 0 0

iii) Station Structure Beam - 2B1 suitable for fixing under hung Isolator (1.695t per tower). (1.631t per tower for structure+ 0.064 MT per tower for Bolt &Nuts) No/t 4/6.78 2/3.39 0 0 0

iv) Station Structure Beam -2B2 without under hung Isolator (1.167t per tower) (1.112t per tower for structure+ 0.055t per tower for Bolt & Nuts) No/t 8/9.336 2/2.334 0 0 0

b) 110kV Side Station Structures for 220kV chadchan S/S i)Station Structure Tower - 21T1 with peak (0.952t per tower) (0.908t per tower for structure+ 0.044t per tower for Bolt &Nuts ) No/t 8/7.616 0 0 0 0

ii) Station Structure Tower - 21T1 with peak 2.5 mtrs extension (1.352t per tower) (1.290 t per tower for structure+ 0.062t per tower for Bolt &Nuts ) No/t 4/5.408 0 0 0 0

iii) Station Structure Tower - 21T2 with out peak.(1.089t per tower) (1.020 t per tower for structure+ 0.066 t per tower for Bolt &Nuts) No/t 16/17.376 0 0 0 0

iv) Station Structure Beam - 21B1 suitable for fixing under hung Isolator(0.552t per tower) (0.524 t per tower for structure+ 0.028 t per tower for Bolt &Nuts) No/t 9/4.968 0 0 0 0

v)Station Structure Beam -21B2 without under hung Isolator (0.465 t per tower) (0.429 t per tower for structure+ 0.036 t per tower for Bolt & Nuts) No/t 14/6.51 0 0 0 0

vi) Lighting/Lightning mast (2.8119t per tower) (2.678t per tower for structure +0.1339t per structure for Bolts & Nuts) No/t 11/30.9309 1/2.8119 0 0 0

c) 110kV side Station Structures fabricated out of galvanised mild steel (including Bolts & Nuts) at 110kV S/s- Dhulkhed, Jigajevanagi S/s and Kerur S/s i) Station towers (1T1) (1.054 t per tower) (0.986t per tower for structure+ 0.068t per tower for Bolt &Nuts) with peak. No/t 0 0 2/2.108 2/2.108 1/1.054

ii)Station Beams type 1B1 with peak. (10.4 mtr bay width for kurugodu S/s & 8.2mtr bay width for Srigeri cross S/s)(0.553t per tower) 0.521 t per tower for structure+ 0.032 t per tower for Bolt &Nuts) No/t 0 0 2/1.106 2/1.106 1/0.553

II. MOUNTING STRUCTURES OF 220kV & 110kV (including Bolts & Nuts) for 220kV Chadchan, 220kV Indi i) 220 kV Isolator Live point height 8250 mm (1.438tper Structure) (1.404 t per tower for structure+ 0.034 t per tower including Bolt &Nuts) No/t 12/17.256 4/5.752 0 0 0

ii. 220 kV Isolator Live point height 5750 mm (0.937 t per Structure)(0.911 t per tower for structure+ 0.026 t per tower including Bolt &Nuts) No/t 8/7.496 4/3.748 0 0 0

iii. 110 kV Isolator Live point height 6350 mm (0.924 MT per Structure)(0.894 t per tower for structure+ 0.030 t per tower including Bolt &Nuts) No/t 24/22.176 0 0 0 0

iv. 110 kV Isolator Live point height 4600 mm (0.741 t per Structure)(0.726 t per tower for structure+ 0.015 t per tower including Bolt &Nuts) No/t 18/13.338 0 0 0 0

v. Current transformer 220 kV & NCT's (0.170 t per Structure) (0.160 t per tower for structure+ 0.010 t per tower for Bolt & Nuts) No/t 17/2.89 6/1.02 0 0 0

vi. Current transformer 110 kV CTs & 11kV NCT's (0.152 t per Structure) (0.140 t per tower for structure+ 0.012 t per tower for Bolt & Nuts) No/t 34/5.168 0 0 0 0

vii. Voltage transformer/CVT's 220kV (0.180 t per Structure) (0.170t per tower for structure+ 0.010 t per tower for Bolt & Nuts) No/t 12/2.16 6/1.08 0 0 0

viii. Voltage transformer 110kV (0.142 t per Structure) (0.131 t per tower for structure+ 0.011t per tower for Bolt & Nuts) No/t 6/0.852 0 0 0 0

ix. Lightening Arrestors 198kV (0.185 t per Structure) (0.180 t per tower for structure+ 0.005 t per tower for Bolt & Nuts) No/t 12/2.22 6/1.11 0 0 0

x. Lightening Arrestor 96kV (0.111t per Structure) (0.100t per tower for structure+ 0.011t per tower for Bolt & Nuts) No/t 30/3.33 0 0 0 0

xi. Post insulators for rigid bus 220 kV side (0.144 t per Structure) (0.1270t per tower for structure+ 0.017t per tower for Bolt &Nuts) No/t 78/11.232 24/3.456 0 0 0

xii.Post insulators for rigid bus 110 kV side (0.141t per Structure) (0.129t per tower for structure+ 0.012t per tower for Bolt &Nuts) No/t 96/13.536 0 0 0 0

xiii.For High post insulators for Transformers a) For 160MVA, Transformer (0.221MT/structure) 220kV side - 6 Nos 110kV side (6 Nos) - Bolted type foundation (0.221t per Structure)(0.204t per tower for structure+ 0.017t per tower for Bolt &Nuts) (b)For PT bay at level difference 220kV side-6Nos(0.218MT per tower)-6Nos c) 110/11kV transformer - 3 nos No/t 21/4.641 0 0 0 0

xiv Wave Trap 220kV, 0.5mH (0.3276t per tower) No/t 2/0.6552 2/0.6552 0 0 0

xv Pedestal insulators for wave trap 0.5mH, 2000A (0.144 MT per Structure) No/t 2/0.288 2/0.288 0 0 0

xvi.11kV UG cable terminating structure for 1CX 1000sq.mm cable (11kV side of 10MVA Power Transformer) (0.072 t per structure) (0.069 t per tower for structure+ 0.003 t per tower for Bolt &Nuts) No/t 1/0.072 0 0 0 0

xvii.11kV GOS/Cable terminating structures for 11kV Capacitor Bank (0.158 t per structure) (0.150 t per tower for structure+ 0.0075t per tower for Bolt &Nuts) No/t 1/0.1575 0 0 0 0

xviii.Street lighting lattice type structure along with GI pipe for fixing of LED lamp (0.182 MT + 5% B&N)-8.5 mtr height No/t 20/3.822 8/1.5288 0 0 0

III)110kV Mounting Structures at 110kV Dhulkhed S/s & Jigajevanagi S/S and Kerur S/s i) 110 kV Isolators Live point height 4600mm (0.752 t per tower) (0.726 t per tower for structure+ 0.026 t per tower including Bolt &Nuts) No/t 0 0 5/3.76 5/3.76 2/1.504

ii) 110 kV Current transformer (0.158 t per tower) (0.146 t per tower for structure+ 0.012 t per tower for Bolt & Nuts) No/t 0 0 9/1.422 9/1.422 3/0.474

iii) 110 kV Voltage transformer (0.148 t per tower) (0.137 t per tower for structure+ 0.011 t per tower for Bolt & Nuts) No/t 0 0 3/0.444 3/0.444 0

iv) 110 kV Lightening arrestors (0.116 t per tower) (0.105 t per tower for structure+ 0.011 t per tower for Bolt & Nuts) No/t 0 0 6/0.696 6/0.696 3/0.348

v) Pedestal insulators 110 kV for bus (0.140 t per tower) (0.127 t per tower for structure+ 0.013t per tower for Bolt &Nuts) No/t 0 0 6/0.846 6/0.846 3/0.423

vi) 110kV T type Rigid bus support Live point height 6350mm (0.635t per tower) (0.585 t per tower for structure+ 0.05t per tower for Bolt &Nuts) No/t 0 0 3/1.905 3/1.905 2/1.27

vii.Street lighting lattice type structure along with GI pipe for fixing of LED lamp (0.182t + 5% B&N)-8.5 mtr height No/t 0 0 2/0.3822 2/0.3822 2/0.3822

SS46 Total Weight of Station structures & Mounting Structures, Lighting Mast & Street Lighting Structure (excluding Bolts & nuts) per technical specifications t 211.743 31.414 11.892 11.892 5.633 272.574

SS47 Total Weight of Bolts & Nuts of Station structures & Mounting Structures, Lighting Mast & Street Lighting Structures per technical specifications t 11.4426 1.5659 0.7772 0.7772 0.3752 14.9381

SS48 I) RIGID BUS WITH TAPS & CLAMPS : i) Aluminium Tube conforming to 6340 WP of IS-5082 / 1969 (BS 1600-Sch.80/40) including fixing of clamp, connector jumper, corona ring etc., complete & as per technical specifications of following sizes. 100 mm size - 220kV side (618)mtrs) 100 mm size - 110kV side (624 mtrs) mtrs 1242 1242

SS49 ii) 75mm size mtrs 108 60 60 30 258

SS50 iii)63 mm size for connecting isolator to vertical tap At proposed 220kV chadchan S/s 220kV side-282mtrs 110kV Side-372mtrs mtrs 654 102 36 36 18 846

SS51 viii) Inverted 'V' taps made of 63 mm Aluminium Tube (BS - 1600) of 2500mm vertical height for vertical portion and cross bus on 220 kV Side with rounded off End. No 33 12 45

SS52 ix) a) Straight taps made of 63 mm Aluminium Tube (BS - 1600) of 1250mm vertical height for vertical portion and cross bus on 110 kV Side with rounded off End. (For Chanchad S/s) b) Straight taps made of 63 mm Aluminium Tube (BS - 1600) of 1750mm vertical height for vertical portion and cross bus on 110 kV Side with rounded off End. (For Dhulkhed TB, Jigajevangi & Kerur TBs) No 60 6 6 3 75

SS53 II) Post insulator clamps suitable for 100mm Aluminium pipe and post insulator Solid core type as per technical specifications: 1) 220 kV Side a) Rigid type No 42 42

SS54 b) Expansion type No 36 36

SS55 2) 110 kV Side a) Rigid type No 24 24

SS56 b) Expansion type No 24 24

SS57 c) Sliding type-(100mm Aluminium pipe) (for Main Bus+I/C Bay) No 48 48

SS58 3) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 220kV & 110kV side a)Rigid Type No 0 12 3 3 3 21

SS59 b)Expansion Type No 0 12 3 3 3 21

SS60 b)Sliding type No 3.0000 3.0000 3.0000 9

SS61 4) Post insulator clamps suitable for 63 mm Aluminium pipe & Post insulator solid core type - 110kV side a)Rigid Type No 0.0000 6 6.0000 3 15

SS62 5) Corona Bell suitable for Aluminium Pipe of Size a) 100 mm on 220kV Side- (12Nos) b)100 mm on 110kV Side-(12Nos) No 24.00 0.00 24

SS63 6) Corona Bell suitable for Aluminium pipe of size 75 mm on 220 kV & 110kV Side No 6.00 6.00 6.00 3.00 21

SS64 7)End cap suitable for Aluminium pipe of size For Tekkalakote S/s a) 63mm on 220kV side-(33 Nos) b) 63mm on 110kV side-(36 Nos) No 93.00 12.00 105

SS65 8)End cap suitable for 63mm on 110kV side No 6 6 3 15

SS66 10) Flexible type terminal connector suitable for 63mm Aluminium tube to connect isolator No 6 6 3 15

SS67 11) Terminal Connector suitable for 75mm Al tube to Drkae/Moose(Bus) No 3 3 3 9

SS68 BUS BAR FORMATION : 1) Moose ACSR Conductor mtrs 8500 1500 130 130 130 10390

SS69 2) Drake ACSR mtrs 100 100 100 300

SS70 INSULATORS: Solid core Bus Post Insulator - Cylindrical Solid core Insulator as per IS:5350, Part-II & III & as per technical specification: 1) A)For 220kV side -2 units/stack (For Chadchan S/s) a) Post Insulators of Rigid Bus -78 Stacks b) Post insulator for wave trap 0.5mH, 2000A - 2 Stacks c) High level Post Insulators for 160MVA Tr -6 Stacks B) For 220kV side -2 units/stack (For 220kV Indi TB) a) Post Insulators of Rigid Bus -24 Stacks Stack 86 24 110

SS71 2) For 110kV side -1 unit/stack For Chadchan S/s a) Post Insulators of Rigid Bus -96Stacks b) High level Post Insulators for (160 MVA Tr -6 Nos,10MVA Tr -3Nos.) For Dhulkhed S/s a)Post Insulators of Rigid Bus -15Stacks Stack 105 15 15 9 144

SS72 3) 11kV,120 KN Disc Insulators: a) 220 kV side - Single Tension string of 16 units each i. For Chadchan S/s (220kV line,BC & 100 MVA Tr)- 12strings ii. For Indi TB (220kV line BC Bays) - 24strings For Chadchan S/s b)Double Tension String of 2x16units each - 12 Strings (for 220kV and BC Bays) No 1344 384 1728

SS73 c) 110 kV line side- i) Double Tension String of 2x6units each - 60 Strings (160MVA Tr and BC ) ii)Tension strings: Strings of 6units No 1008 1008

SS74 e) 110 kV line side- Polymer type Double Tension String for 110 kV side 160 MVA , 220/110kV Tr Bay over 160 MVA Tr No 12 12

SS75 4) 11kV,90 KN,Disc Insulator : For chadchan S/s a) 220kV side- Single Suspension string of 14 units each - 18 strings b) 110kV side- Single Suspension string of 6 units each - 39 strings c) For Indi TB 220kV side- Single Suspension string of 14 units each - 6 strings d) For Dhulkhed TB 110kV side- Single Suspension string of 9 units each - 3 strings No 486 84 27 27 27 651

SS76 INSULATOR HARDWARE & CLAMPS as per technical specification: For Dhulkhed TB, Jigajevangi and Kerur TB 110kV side- Bolted type suspension clamp & hardware suitable for Drake ACSR.( On 110kV Side).) No 0 3 3 3 9

SS77 I. a) For chadchan S/s Bolted type Double tension clamp to suit Twin Moose ACSR conductor (for 220kV -18Nos.) for 220kV line & B/C bays) b) Bolted Type Double tension clamp to suit Twin Moose ACSR (110kV side-42Nos) for 160MVA Transformer and BC Bay No 60 60

SS78 2)Bolted Type tension clamp to suit Moose ACSR For chadchan S/s a) 220kV side-12Nos b) 110kV side-48Nos c) For Indi TB (for 220kV line) 220kV side-12Nos No 60 12 72

SS79 3) Bolted type suspension clamp to suit Moose ACSR For chadchan S/s (a) 220kV Side-6Nos (b) 110kV Side-27Nos c) For Indi TB (for 220kV side) 220kV side-6Nos No 33 6 39

SS80 5) Bolted type suspension clamp to suit Twin Moose ACSR conductor for a) 220kV Side-6Nos(220kV line and B/C bays) b) 110kV Side-27Nos (160MVA Transformer & BC Bay) No 24 0 24

SS81 6) ‘C’ Type Wedge connector suitable for Moose to Moose ACSR. i) For chadchan S/s 220kV Side-24 Nos 110kV Side-99Nos ii.For Indi TB 220kV side -24Nos No 123 24 147

SS82 2) ‘C’ Type Wedge connector suitable for AAAC Moose to Twin Moose ACSR. i.For Indi TB 220kV side -24Nos No 0 18 18

SS83 3) C Type wedge connector suitable for Twin Moose - Twin Moose ACSR a) 220kV side-24Nos (220kV line & B/C) b) 110kV Side-36Nos( 160MVA Transformer and Bus Coupler) No 60 60

SS84 4) ‘C’ Type wedge connector suitable for Drake/Twin Zebra to Moose/Twin Moose ACSR conductor (for 220kV line) No 18.00 18

SS85 5) C Type wedge connector suitable for Panther/lynx to Moose(110kV Side) No 42.00 12.00 12.00 12.00 78

SS86 6) C Type wedge connector suitable for Twin Moose to Single Moose on 110kV side of 160MVA Transformer No 6 6

SS87 7) PI Clamp suitable for post insulator & Moose ACSR a) 220KV Side-6 Nos(for 160MVA Transformer) b)110kV side - 3Nos (for 10MVA Transformer) c) 110kV Side-6Nos (for 110kV side of 160MVA Transformer). No 15 15

SS88 9) T-connector suitable for 63mm Al. tube and Twin Moose ACSR (For I/C Bay and 160MVA Transformer) a) For 220kV line -6Nos b) For 110kV side -6Nos No 12 12

SS89 10) Spacers (Rigid /flexible) for Moose ACSR 110kV side -Chadchan S/s-400Nos 220kV side - chadchan S/s-400Nos No 800 800

SS90 11)Post insulator clamp suitable for Moose ACSR for wave trasp 0.5mH, 2000A No 2 2

SS91 Auxiliary Transformer: Supply of Station Auxiliary Transformer with copper windings & oil, cable termination type on both HT & LT, outdoor type, with off load tap changer in steps of 2.5 % as per technical specifications. 250 kVA, 11 kV/433 V, Auxiliary Transformers, 3 Ph, Delta / Star - Dyn11 No 2 2

SS92 LTAC Panel(Indoor) LTAC panel (indoor ) as per technical specification comprising of voltmete & ammeter, 415V,LTAC Panel (2 I/C ACB 800A+2 O/G SFU 200A+8 O/G SFU 100A+14 O/G SFU 63 A +12 O/G SFU 32 A+1B/C SFU 800A+1DG C/O switch 300A) set 1 1

SS93 AC Distribution box (Outdoor) : a) AC distribution Box (outdoor):- double front type, 24 terminals, 1200 x 1350 x 600 mm, 2 I / C of 100 Amps, MCCB 20 KA + 24 O / G MCB 16 Amps + 2 O / G of 100 A, HRC fuse as per technical specifications. No 5 1 6

SS94 b) AC distribution Box single front type, 6 terminals 750 x 1350 x 300 mm , one I / C of 100 Amps MCCB 20 KA + 6 O / G MCB 16 A + 1 O / G of 100 A, HRC fuse as per technical specifications. No. 3 3

SS95 c) AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type No. 1 1 1 3

SS96 LT Power Cable: Power cable from auxiliary transformer to LTAC panel, a) 1.1kV PVC insulated 240sqmm Al. cable 3.5 core with glands / lugs/ferruls. mtrs 100 100

SS97 b) 1.1 kV class PVC insulated Aluminium power cable (AC supply for lighting & DFDB/SFDB etc., 70 Sq mm, 3.5 core with glands / lugs / ferruls mtrs 4000 300 4300

SS98 b) 1.1 kV class PVC insulated Aluminium power cable 95 Sq mm, 4 core with glands / lugs / ferruls mtrs 200 200 200 600

SS99 b) 1.1 kV class PVC insulated Aluminium power cable 25 Sq mm, 4 core with glands / lugs / ferruls mtrs 200 200 200 600

SS100 b) 1.1 kV class PVC insulated Aluminium power cable 10 Sq mm, 4 core with glands / lugs / ferruls mtrs 200 200 200 600

SS101 DG set: Supply, Erection Testing & Commissioning of 3 phase, 50Hz, 415V, 0.8 PF, 58.5KVA DG Set, mounted on a base frame, complete with inbuilt fuel tank and battery 1 no. 12 V & inbuilt standard manual Control Panel with acoustic enclosure : NAL Approved D.G. Set 58.5KVA capacity with AMF panel as per technical specification Set 1 0 0 1

SS102 STATION BATTERY & BATTERY CHARGER: A) STATION BATTERY SET : 1) 220V, 300 AH Battery set (Plante/Grid Type/Nickel Cadmium Type) with cells & accessories as per technical specifications. Set 2 0 0 2

SS103 B) BATTERY CHARGER : 1) Battery charger suitable for '2 X 220 V, 300 AH, with float (2 Nos) & float cum boost (2 Nos) type battery charger including control panels, change over arrangements etc., complete as per technical specifcation along with two separate DC distribution panel (indoor) 1I/C+20 O/G SFU 60 A+20 O/G SFU 30A. Set 1 0 0 1

SS104 PVC insulated Copper Control Cable with Lugs / Ferrules as per technical specifications. A) 1.1 kV class. Size of cable: 1) 19 Core 2.5 Sq.mm.Copper Control Cables km 10 3 0.25 0.25 0.15 13.65

SS105 2) 14 Core 2.5 Sq.mm.Copper Control Cables km 18 0 0 0 0 18

SS106 3) 10 Core 2.5 Sq.mm.Copper Control Cables km 5 1.5 0 0 0 6.5

SS107 4) 7 Core 2.5 Sq.mm.Copper Control Cables km 10 0 0 0 0 10

SS108 5) 4 Core 2.5 Sq.mm.Copper Control Cables km 15 2 1 1 0 18.3

SS109 6) 4 Core 6.0 Sq.mm.Copper Control Cables km 18 3 1 1 0 22.8

SS110 7)4 Core 16.0 Sq.mm.Copper Control Cables km 3.5 0 0 0 0 3.5

SS111 8)4 Core 4 Sq.mm.Copper Control Cables km 8 0.5 0 0 0 8.5

SS112 9) 2 Core 70 Sq.mm.Copper Control Cables km 0.20 0.00 0 0 0.2

SS113 10)2 Core 6 Sq.mm.Copper Control Cables km 0.10 0.1 0.075 0.275

SS114 11)2 Core 2.5 Sq.mm.Copper Control Cables km 0.05 0.05 0.05 0.15

SS115 B) Copper PVC Instrumentation Cable, Armoured (Screened Cable) Copper Cable with glands/ lugs/ferrules :1P X 0.5 Sq mm screened cable km 4 4

SS116 11 kV Switchgear:- 1) 11kV, 25KA, Metal Clad VCB Switchgear,1600A for 1 Incomer & 1250A for feeders (1I/C+6F+1CB +1AP) SAS compatible as per tchnical specification. Annunciator panel shall be simplex panel instead of desk type mentioned elsewhere in specification. Note: 1. The Remote Announciation cum Control panel is Simplex type. 2. The Electronic Trivector meters shall be as per technical specifications. 3.The switchgear for capacitor bank shall have necessary Over voltage / Under voltage / Circulating current relays and other protection relays as per specification. 4. The Switchgears Suitable for 10MVA,110/11kV Power Transformers. 5. The Switchgear will be supplied by KPTCL and the Bidder has to quote for complete scope of erection of Switchgear including moving the Switchgear from the point of unloading to the point of erection, erection of the complete Switchgear, wiring of Switchgear, testing & commissioning etc., complete. Set (Supplied by KPTCL) 1 1

SS117 11kV XLPE insulated UG Cable as per Technical specifications: a) 11 kV XLPE, 95 Sq mm Aluminium cable- 3 core (for 2 Auxiliary transformers from the 11KV switchgear) mtrs 500 500

SS118 b) 11 kV XLPE cable, 1000 Sq. mm Aluminium cable- 3 Runs per phase of 1CX1000 Sq.mm cable from 110/11KV Transformers to 11KV Switchgear. mtrs 500 500

SS119 c) 11 kV XLPE cable, 240 Sq. mm Aluminium cable- 3 core to be run from 11KV Switchgear to 11KV take off DP structure & 11KV Capacitor Bank. mtrs 400 400

SS120 Cable Termination Kit suitable for following sizes as per Technical specifications: A. Indoor type: a) Heat shrinkable type Cable termination kits suitable for 1C x 1000 Sq.mm XLPE cable No 6.00 6

SS121 b) Heat shrinkable type Cable termination kits suitable for 3C x 240 Sq.mm XLPE cable No 5.00 5

SS122 c) Heat shrinkable type Cable termination kits suitable for 3C x 95 Sq. mm XLPE cable No 4.00 4

SS123 B. Outdoor type: a) Heat shrinkable type Cable termination kits suitable for 1Cx 1000 Sq.mm XLPE cable No 6.00 6

SS124 b) Heat shrinkable type Cable termination kits suitable for 3Cx 240 Sq.mm XLPE cable No 5.00 5

SS125 c) Heat shrinkable type Cable termination kits suitable for 3C x 95 Sq.mm XLPE cable No 4.00 4

SS126 FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS i) Mechanical Foam Type Extinguisher : a) 50 Liters No 8.00 8

SS127 b) 09 Liters No 8.00 8

SS128 ii) Water type (gas pressure type) 9 Ltr. capacity No 10.00 10

SS129 iii) Carbon Dioxide Type 4.5 Kgs capacity No 10.00 10

SS130 iv) Dry chemical powder 6.0kg No 5.00 5

SS131 v) Sand type G.I Buckets 15 Ltr. capacity No 16.00 16

SS132 vi) Steel stands No 4 4

SS133 Capacitor Bank: Design, Engineering, supply, erection, testing & commissioning of 2.9MVAR, 12.1kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable neutral CT and station class LAs, 0.2% series reactor on neutral side with mounting structures for NCT, Capacitor Bank, station class LAs, Series reactor with 10% spare capacitors complete etc,. complete as per specification. Note : For 11kV Switchgear & remote announciation /control of the Capacitor Bank refer Techno-commercial sheet. Set 1.00 1

SS134 11kV Isolators & DP structure: 1) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank Set 1.00 1

SS135 2) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR. Set 4.00 4

SS136 3) 9 kV, 10 KA surge arrestor with connector and clamp Nos 15 15

SS137 4) Supply of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set . Set 4 4

SS138 5) 11kV DB Isolator, 400A, 25kA with LA (for Auxiliary Transformer) Set 2 2

SS139 6) Supply of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector meter complete set with all accessories for auxilliary transformer. Set 2 2

SS140 Maintenance Tools and Plant: 1) Earth resistance tester No 1 1

SS141 2) Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons) No 1 1

SS142 3) Telescopic ladder Aluminium 6 Mtr. Height No 1 1

SS143 4) Ring spanner set Set 1 1

SS144 5) Tube spanner set Set 1 1

SS145 6) Pipe wrench 24 inch No 2 2

SS146 7) Pipe wrench 18 inch. No 2 2

SS147 8) Hydraulic crimping tools up to 1000 Sq.mm No 1 1

SS148 9) Hydraulic shearing machine No 1 1

SS149 10) Threading die set for pipe threading No 1 1

SS150 11) Welding machine (arc welding) 10kVA No 1 1

SS151 12) Heavy duty drilling machine No 1 1

SS152 13) Rubber hand gloves (15 kV tested) Pairs 3 3

SS153 14)Hand torch 5 Cells (Rechargeable 5W LED hand torch) No 4 4

SS154 16) Insulated cutting plier 12 inch size No 3 3

SS155 17) Insulated cutting plier 8 inch size No 3 3

SS156 18) Line live tester AC/DC 500 V No 2 2

SS157 19) Screw driver 18" No 3 3

SS158 20) Screw driver 12" No 3 3

SS159 21) Hammer 8 lbs No 2 2

SS160 22)Hammer 2 lbs No 2 2

SS161 23) Chain pulley block 5 ton capacity No 1 1

SS162 24) Hydraulic jack 5T capacity No 4 4

SS163 25) Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. height. No 1 1

SS164 26) Allen keys Set 1 1

SS165 27)Box spanners Set 1 1

SS166 28) Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester. No 1 1

SS167 29) Insulation megger 2.5 - 5 kV No 1 1

SS168 30) Insulation megger 500 V No 1 1

SS169 31) SF-6 gas leak Detector No 1 1

SS170 32) Multimeter electromechanical No 1 1

SS171 33) Multimeter Electronic No 1 1

SS172 34) Protective goggle No 2 2

SS173 35) Grounding sticks extendable upto 18ft No 6 6

SS174 MISCELLANEOUS ITEMS : 1) Rubber mats 2000 mm x 1000 mm x 12 mm size suitable. No 20 20

SS175 2) First aid box. No 1 1

SS176 3) Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English. No 1 1

SS177 4) Water filter / Water purifier : Wall mounting type (Aqua-guard type). No 1 1

SS178 5) Sub-station name board duly painted. No 1 1

SS179 6) Fixograph of size 1.5m x 2.5m with English / Kannada alphabets. Set 1 1

SS180 7) Brass cupboard lock 6 levers (best make of approved quality) 75 mm size No 5 5

SS181 8) Danger board (prohibited) with support structure including fixing in front of the gate No 1 1

SS182 9) Equipments name plates and earthing name plates including fixing at outdoor yard No 350 350

SS183 Furniture for control room staff and maintenance staff: 1) Steel Almirahs 6 1/2 feet No 2 2

SS184 2) Steel Almirahs 6 1/2 feet with glass panel doors No 1 1

SS185 3) Officers tables No 4 4

SS186 4) Steel slotted angle rack (big size) No 4 4

SS187 5) Steel slotted angle rack (small size) No 4 4

SS188 6) Steel dust bins No 4 4

SS189 7) Executive Revolving chairs No 8 8

SS190 8) S type arm chairs No 10 10

SS191 9) Steel folding chairs No 4 4

SS192 STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder) i)Supply and installation/ Fixing/ Provision of Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProof), rustproof, dustproof, waterproof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Metering suitable baseplate and having a provision for Fuse/ MCBcut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility,Timer,Contactor,2 Way head frame with diecast LM-6 pulleys ,stainless steel axle,Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia,stainless steel wire rope of AISI304 grade7/19-core, Suitable reversible geared motor operating on 230/415V,50Hz,etc., as per technical specification Each 11 1 12

SS193 iii) PVC Insulated Copper Control Cables : 2C x 6 sqmm, 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification. mtrs 8640 1280 160 160 160 10400

SS194 iv)Supply & Fixing of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material LED streetlight 200W Note:2 Nos. of Lightning / Lighting Mast (LM) are proposed for lightning protection and for illumination of the station Yard. The quantity of lightning / lighting mast indicated are located such that the entire station yard with equipments is protected against lightning. However any additional lighting masts may be provided for sufficient illumination and lightning protection (DSLP)of yard, if necessary. The design of lighting outdoor & indoor is also in the scope of the bidder as specified elsewhere in the technical specification. The scope also includes supply & erection of lighting fixtures, lighting mast panels with timer, contactor, control cable, Motorized hoist etc. Suitable 2.5M Lightning spikes shall be provided on top of building for Lightning protection. The Design of lighting outdoor & Indoor in station yard and buildings etc. is in the scope of bidder as specified in the technical specification. Nos 108 16 2 2 2 130

SS195 PLCC equipments Note: PLCC equipment is provisioned for inter circuit coupling for 220kV Lines 1) Wave Trap with clamps 0.5 mH, 2000A,50kA dual band, 50 to 100kHz and 100 to 500kHz Pedastal type, along with PI & Hardwares(Ph-Ph coupling) with suitable terminal connectors Nos. 2 2 4

SS196 2) PLCC Terminal single channel Nos. 1 1 2

SS197 3) Coupling device (LMU+LMDU) Set 1 1 2

SS198 4) Protection coupler-4 command version Nos 1 1 2

SS199 5) HF Co axial cable 75 Ohms km 0.5 0.5 1

SS200 6) PLCC EPAX 16/8/8 No 1 1

SS201 7) Push Button telephones Nos. 6 6

SS202 8) Battery charger 48V, suitable for 200 AH Battery set No 2 2

SS203 9) Battery set 48V, 200 AH No 2 2

SS204 10) 48V DCDB with independent change over b/w DC Source 1 & DC Source 2,with 20 feeders. No 1 1

SS205 11) Digital Protection coupler 8 command with EI interface with 220V DC power supply No 2 0 2

SS206 SDH EQUIPMENT: 1) (STM-16 MADM UPTO 3 MSP PROTECTED DIRECTIONS)-BASE EQUIPMENT (COMMON CARDS, CROSS CONNECT/CONTROL CARDS,OPTICAL BASECARDS,POWER SUPPLY CARDS, POWER CABLING, OTHER HARDWARE AND ACCESSORIES INCLUDING SUB RACKS PATCH CORD, DDF ETC FULLY EQUIPPED EXCLUDING OPTICAL INTERFACE & TRIBUTARY CARDS. No 1 1

SS207 2) OPTICAL INTERFACE-Transceiver i) S16.1SEP - (30kms) 220kV Indi-Chadchan No 2 2

SS208 3) TRIBUTARY INTERFACE i) E1 Interface card (Min. 16 interfaces per card) - 3 MSP No 2 2

SS209 ii) 1X1000 base LX SFP (GIGABIT ETHERNET INTERFACES 10/100 MBPS WITH LAYER-2 SWITCHING) No 1.00 1

SS210 iii) Ethernet interface 10/100 Mbps with layer-2 switching (Min, 2X1GBPS+4X100/10 Mbps ports) without SFP - 3MSP. No 2 2

SS211 iv) Cabinet Equipment to house SDH Equipment + Optical cards + Tributary Cards, Drop/Insert MUX Equipments and DACS Equipment Set 1 1

SS212 v) 220V DC to 48V DC CONVERTER for SDH equipment No 1 1

SS213 vi) Routers for change over between OFC & VSAT communication for SCADA Data No 1 1

SS214 vii) VOIP Phone No 2 2

SS215 Materials for new bay integration to existing SCADA panel 1) Multi Functional Transducer (MFT) 0.2S class No. 2 2 1 5

SS216 2) Opto Coupler (220 or 110V DC) No. 2 2 1 5

SS217 Cables-Supplying a) Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core Mtrs 40.00 40.00 20.00 100

SS218 b) Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core Mtrs 40 40 20 100

SS219 c) Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core Mtrs 50 50 25 125

SS220 d) Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core Mtrs 50 50 25 125

SS221 e) RJ45 cable Mtrs 50 50 25 125

SS222 f) Data Input card Nos. 2 2 1 5

SS223 g) Data Output card Nos. 2 2 1 5

NOTE 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, KPTCL,9th Floor, Indhana Bhavana, Bangalore.

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same.

3. Supply of equipment/materials and the Erection charges shall include loading and unloading.

4. Copper Flat and GI Flat required for Power Transformers (if supply is in Bidder's scope) shall be supplied alongwith the Transformers and no extra cost is payable on this account. Date

5. The Bidder shall take necessary action to ensure that all the materials supplied shall be properly housed to ensure satisfactory commissioning. Place

6. The prices for all the materials shall be quoted in the Percentage rate finanacial bid. Name

7. Released materials shall be transported to the nearest Major Works Store of KPTCL without any additional cost as per the directions of the Engineer in charge of the work. Designation

8. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”. Name of Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(ii) - Price Breakup for - Station Erection portion including Testing and Commissioning.

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhana Bhavana, BANGALORE - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Station Erection portion including Testing and Commissioning:

Sl No. Name of the Equipment/Materials Unit Quantity Total Quantity

220kV Station at 220kV S/S at Chadchan (Devar Nimbaragi) 2 nos. of 220 kV Terminal Bays at the existing 220/110 kV Indi sub-station 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station

SE1 POWER TRANSFORMERS: a) 160MVA, 220/110/11kV Power Transformer, 3Ph, 50Hz, Core Type, 2 winding Auto Transformer star/Delta, Vector Group: Yna0d11, OLTC, bushing CT for tertiary of ratio 1616/1A, 5P20, 15VA, ONAN/ONAF/OFAF with Fan control cubicle, RTCC Panel, Numerical RTCC panel, Fibre optic temperature sensor, first filling of Oil, and 10% spare oil in non-returnable drums, etc., complete with 2x50% separate radiator bank on left side and terminal connector suitable for Moose ACSR on primary and Moose ACSR on secondary side of the transformer and neutral connectors suitable for copper flats etc., as per Technical Specifications (130MT). Note: Copper Flats required for Power Transformers shall be supplied alongwith the Transformers as per Technical Specifications. No 2 0 0 0 0 2

SE2 b) 10MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11,OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first filling of Oil and 10% spare oil in non-returnable drums etc., complete with Terminal connectors suitable for Single Moose ACSR on primary side of transformer and 2 nos of copper flat for each phase from LV side of Transformer to cable at 11 kV cable terminating structure with suitable support insulator on LV side of Transformer and 2 Nos of copper flats from neutral terminal to earthmat through NCT along with necessary support pin insulators, as per Technical Specifications (35MT). The Power Transpower will be supplied by KPTCL Note: Copper Flats required for Power Transformers shall be supplied alongwith the Transformers as per Technical Specifications. No 1 0 0 0 0 1

SE3 CIRCUIT BREAKER : SF-6 Circuit Breaker with rigid bi-metallic terminal connector suitable for Moose/Twin Moose ACSR with spring / semi-pneumatic / pneumatic type operating mechanism and with mounting structure etc., as per technical specification. i) 220kV, 3150A, 50kA Class SF6 CB No 5 2 0 0 0 7

SE4 (ii) SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connectors complete suitable for Moose/ Twin Moose ACSR and mounting structures as per technical specifications. 110kV, 3150A, 40 kA Class For Dhulkhed TB, Jigajevangi TB & Kerur TB 110kV 1250A 40KA Class SF6 CB No 11 0 3 3 1 18

SE5 ISOLATORS : 220kV electrically cum manually operated double break type disconnects with solid core insulators, terminal connector suitable for AL. tube/Moose ACSR/Twin Moose ACSR conductor, marshalling box etc., complete as per technical specifications: I) 220kV, 2500A,50kA: (for line and B/C bays) a) Upright with Earth Switch (manually operated) (LPH:5750mm) Set 2 2 0 0 0 4

SE6 b) i) Upright without Earth Switch LPH 8250mm Set 6 4 0 0 0 10

SE7 ii) Upright without Earth Switch LPH 5750mm Set 2 2 0 0 0 4

SE8 c) under hung without earth switch Set 2 2 0 0 0 4

SE9 II) 220 kV, 1250A, 50kA for 160MVA Power Transformer Bays, Line Bays & PT Bays at 220kV Chadchan a) Upright mounting type without Earth Switch LPH 8250mm Set 6 0 0 0 0 6

SE10 b) Upright mounting type without Earth Switch LPH 5750m) Set 4 0 0 0 0 4

SE11 c) Underhung mounting type without Earth Switch Set 2 0 0 0 0 2

SE12 III) 110kV class Isolators: At proposed 220kV chadchan S/S 110kV, double break electrically cum manually operated isolators with solid core insulator, terminal connector suitable for Al. tube/Moose ACSR/Twin Moose ACSR conductor, marshalling box etc., complete as per technical specification. 1) 110kV, 1250A, 40kA: (For line, 110/11kV Tr. & PT Bays) a)Upright mounting type with manually operated Earth switch LPH 4600mm Set 7 0 0 0 0 7

SE13 b)Upright mounting type without Earth switch LPH 6350mm Set 18 0 0 0 0 18

SE14 c)Upright mounting type without Earth switch LPH 4600mm. Set 7 0 0 0 0 7

SE15 d)Underhung Mounting without earth switch Set 7 0 0 0 0 7

SE16 2) 110kV, 2000A, 40kA: (for 110kV side of 220/110kV Trf and B/C bays) Upright without Earth Switch a) Live Point Height 6350mm Set 6 0 0 0 0 6

SE17 b) Live Point Height 4600mm Set 4 0 0 0 0 4

SE18 c) under hung without earth switch Set 2 0 0 0 0 2

SE19 3)110KV, 1250A, 40KA Class Double Break Manually operated isolator with with solid core insulator, terminal connectors suitable for Moose/Drake ACSR/75 mm pipe/63 mm pipe marshalling box etc., complete as per technical specification. At 110kV Dhulkhed S/S: a) Upright mounting type with Earth switch Live point height 4600mm At 110kV Jigajevanagi S/S: a) Upright mounting type with Earth switch Live point height 4600mm Set 0 0 2 2 1 5

SE20 b)Upright mounting type without Earth switch Live point height 4600mm Terminal connectors for Isolators for Dhulkhed TB : Rigid type suitable for Moose ACSR- 18 Nos Flexible type suitable for 50mm Al.pipe -3 Nos Flexible type suitable for 63mm Al.pipe - 3 Nos Terminal connectors for Isolators for Jigajevanagi : Rigid type suitable for Moose ACSR- 18 Nos Flexible type suitable for 50mm Al.pipe -3 Nos Flexible type suitable for 63mm Al.pipe - 3 Nos Set 0 0 2 2 1 5

SE21 CURRENT TRANSFORMERS : Current transformers including marshalling boxes, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose/Twin Moose ACSR conductor as per technical specifications. For Chadchan S/s 1)220kV, 50kA CT of Ratio 1600-1000-800/1-1-1A with additional 2 Cores of 1200/1A Type-1 (2 nos. main CT is used as NCT) (for 160MVA Transformer bays) For 220kV Indi TB 220kV, 50kA CT of Ratio 1200-800-600-300/1-1-1A (Required for line & Bus-coupler) i)For metering:-Accuracy 0.2S, Burden 10VA ii)For Differential/ Distance Protection:PS class, Knee Point Voltage 1200V at 1200/1A, RCT 12Ohms 400V at 300/1A, Rct 3 Ohms, For Bus Bar Protection: PS Class, Knee Point Voltage 1200V at 1200/1A, Rct-12 Ohms. Note:- a) All the current transformers in each Kv Class shall be of one & the same make for interchangeability & reliabity of performance. No 17 6 0 0 0 23

SE22 2) a) 110kV, 40kA CT of Ratio 1000-800/1-1-1A (Required for 160MVA Transformer & bus coupler ) Note: Terminals connectors should be suitable for double Moose ACSR for 9Nos of main CTs No 9 0 9

SE23 For Dhulkhed TB and 110kV Jigajevanagi TB, 110kV Kerur TB b)110 kV class, 40 KA, CT of ratio 600 -400/ 1-1-1A for Lines Core - 1 : Vk-800 V at 400A, Rct 4 ohm at 400/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No 6 6 3 15

SE24 3) Current transformers including marshalling boxes, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose/Drake ACSR conductor as per technical specifications. 110 kV class, 40 KA, CT of ratio 400-200/ 1-1-1A for 110/11kV Transformers Core - 1 : Vk-110 V at 600A, Rct 5 ohm at 600/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up Note: 1. All the CTs in each kV class shall be of one and the same make for inter-changeability & reliability of performance. 2. The make and characteristic of 11kV NCT should be same as that of of the incomer CT of 11kV Switch gear. 3. Terminal Connectors should be suitable for the respective CTs No. 3 0 3 3 0 9

SE25 5) 110kV 40kA CT of Ratio 800-400/1-1-1A, (Required for lines) No 21 0 0 0 0 21

SE26 6) 11 kV NCT, outdoor, 25KA, 1200-800/1-1-1A (of similar rating as incomer of 1250A, 25 kA 11 kV Switchgear) required for 110/11kV transformer as per technical specifications Note: 1. All the CTs in each kV class shall be of one and the same make for inter-changeability & reliability of performance. 2. The make and characteristic of 11kV NCT should be same as that of of the incomer CT of 11kV Switch gear. 3. Terminal Connectors should be suitable for the respective CTs No 1 0 0 0 0 1

SE27 VOLTAGE TRANSFORMERS : Single phase, 3 core, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK as per technical specifications 1) 220kV Class,Ratio 220kV/√3/110V/√3- 110V/√3 No 6 0 0 0 0 6

SE28 2) 110 kV class 110kV/RT3/110V/RT3/ 110V/RT3/ 110V/RT3 Core - 1 : 300 VA, Accuracy class 0.2-Metering Core - 2 : 200 VA, Accuracy class 3P-Protection Core - 3 : 50 VA, Accuracy class 3P. Open delta No 6 0 0 0 0 6

SE29 CAPACITIVE VOLTAGE TRANSFORMERS: 245kV CVT, 4400 pF, 1 Ph CVT with 2 secondaries, terminal connector suitable for Twin Moose ACSR conductor with marshalling box etc., complete as per technical specifications. i) 220kV CVTs of ratio 220kV/√3/110V/√3-110V/√3/110V/√3 No 6 6 0 0 0 12

SE30 SURGE ARRESTOR: Porcelain/Polymer type, with terminal connector suitable for Twin Moose ACSR conductor as per technical specifications. a. 198kV Metal Oxide with surge counter Arrestor class : Station Medium Duty (SM) - Discharge Class 3 No. 12 6 0 0 0 18

SE31 b. 96 kV, 10 KA, SM type with surge counter Arrestor class : Station Medium Duty (SM) - Discharge Class 3 Note : Surge arrestors are with surge monitors & insulating base No. 30 0 0 0 0 30

SE32 (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake/Moose ACSR as per technical specifications. c. 96 kV, 10 KA, SM type for lines Note : Surge arrestors are with surge monitors & insulating base No 0 0 6 6 3 15

SE33 Control and Relay & Protection Panels complete as per specifications: I. C&R Panel compatible to IEC 61850 communication protocol for Sub-station Automation System, complete as per technical specifications. 1) 220 kV Line Type 2L (as per annexure RPP1-SAS) No 2 2 0 0 0 4

SE34 2) 220/110/11 kV Power Transformer panel Type 2T1 (as per annexure RPP2-SAS) No 2 0 0 0 0 2

SE35 3) 220 kV Bus coupler panel Type 2BC (as per annexure RPP1-SAS) No 1 0 0 0 0 1

SE36 4) 220 kV Bus Bar Protection panel Type 2BBA (as per annexure RPP3-SAS) No 1 0 0 0 0 1

SE37 5) 110 kV line - Type 1L (as per annexure RPP4-SAS) No 7 0 0 0 0 7

SE38 6) 110 kV Bus coupler panel Type 1BC (as per annexure RPP6-SAS) No 1 0 0 0 0 1

SE39 7) 110/11 kV Transformer panel Type 1T1(as per annexure RPP5-SAS) No 1 0 0 0 0 1

SE40 8) 11kV line Type 11L(As per Annexure RPP7 SAS) provision for 2 feeders to be made in one panel and provision for 1Capacitor bank & 1 feeder to be made in one panel All types of 220kV feeder C&R panels with BCUs including integration with existing Busbar scheme. Note: The proposed C&R panel shall be interfaced with existing SAS, busbar protection & bus coupler. No 4 0 0 0 0 4

SE41 Control and Relay Panel complete as per specifications: Simplex type 110 V DC compatible to SCADA control and relay panels complete as per specifications. II. For 110 kV Transmission line-Simplex type control and relay panels complete compatible to SCADA as per specifications. No. 0 0 3 3 1 7

I. STATION STRUCTURES & MOUNTING STRUCTURES FOR 220kV SUB STATIONS (including Bolts & Nuts) as per Technical Specification and approved drawings: a) 220kV Side Station Structures : i) Station Structure Tower - 2T1 with peak. (1.578t per tower). (1.502t per tower for structure+ 0.076t per tower for Bolt &Nuts ) No/t 7/11.046 2/3.156 0 0 0

ii) Station Structure Tower - 2T2 with out peak.(1.325t per tower) (1.272t per tower for structure+ 0.053t per tower for Bolt &Nuts) No/t 9/11.925 2/2.65 0 0 0

iii) Station Structure Beam - 2B1 suitable for fixing under hung Isolator (1.695t per tower). (1.631t per tower for structure+ 0.064 MT per tower for Bolt &Nuts) No/t 4/6.78 2/3.39 0 0 0

iv) Station Structure Beam -2B2 without under hung Isolator (1.167t per tower) (1.112t per tower for structure+ 0.055t per tower for Bolt & Nuts) No/t 8/9.336 2/2.334 0 0 0

b) 110kV Side Station Structures for 220kV chadchan S/S i)Station Structure Tower - 21T1 with peak (0.952t per tower) (0.908t per tower for structure+ 0.044t per tower for Bolt &Nuts ) No/t 8/7.616 0 0 0 0

ii) Station Structure Tower - 21T1 with peak 2.5 mtrs extension (1.352t per tower) (1.290 t per tower for structure+ 0.062t per tower for Bolt &Nuts ) No/t 4/5.408 0 0 0 0

iii) Station Structure Tower - 21T2 with out peak.(1.089t per tower) (1.020 t per tower for structure+ 0.066 t per tower for Bolt &Nuts) No/t 16/17.376 0 0 0 0

iv) Station Structure Beam - 21B1 suitable for fixing under hung Isolator(0.552t per tower) (0.524 t per tower for structure+ 0.028 t per tower for Bolt &Nuts) No/t 9/4.968 0 0 0 0

v)Station Structure Beam -21B2 without under hung Isolator (0.465 t per tower) (0.429 t per tower for structure+ 0.036 t per tower for Bolt & Nuts) No/t 14/6.51 0 0 0 0

vi) Lighting/Lightning mast (2.8119t per tower) (2.678t per tower for structure +0.1339t per structure for Bolts & Nuts) No/t 11/30.9309 1/2.8119 0 0 0

c) 110kV side Station Structures fabricated out of galvanised mild steel (including Bolts & Nuts) at 110kV S/s- Dhulkhed, Jigajevanagi S/s and Kerur S/s i) Station towers (1T1) (1.054 t per tower) (0.986t per tower for structure+ 0.068t per tower for Bolt &Nuts) with peak. No/t 0 0 2/2.108 2/2.108 1/1.054

ii)Station Beams type 1B1 with peak. (10.4 mtr bay width for kurugodu S/s & 8.2mtr bay width for Srigeri cross S/s)(0.553t per tower) 0.521 t per tower for structure+ 0.032 t per tower for Bolt &Nuts) No/t 0 0 2/1.106 2/1.106 1/0.553

II. MOUNTING STRUCTURES OF 220kV & 110kV (including Bolts & Nuts) for 220kV Chadchan, 220kV Indi i) 220 kV Isolator Live point height 8250 mm (1.438tper Structure) (1.404 t per tower for structure+ 0.034 t per tower including Bolt &Nuts) No/t 12/17.256 4/5.752 0 0 0

ii. 220 kV Isolator Live point height 5750 mm (0.937 t per Structure)(0.911 t per tower for structure+ 0.026 t per tower including Bolt &Nuts) No/t 8/7.496 4/3.748 0 0 0

iii. 110 kV Isolator Live point height 6350 mm (0.924 MT per Structure)(0.894 t per tower for structure+ 0.030 t per tower including Bolt &Nuts) No/t 24/22.176 0 0 0 0

iv. 110 kV Isolator Live point height 4600 mm (0.741 t per Structure)(0.726 t per tower for structure+ 0.015 t per tower including Bolt &Nuts) No/t 18/13.338 0 0 0 0

v. Current transformer 220 kV & NCT's (0.170 t per Structure) (0.160 t per tower for structure+ 0.010 t per tower for Bolt & Nuts) No/t 17/2.89 6/1.02 0 0 0

vi. Current transformer 110 kV CTs & 11kV NCT's (0.152 t per Structure) (0.140 t per tower for structure+ 0.012 t per tower for Bolt & Nuts) No/t 34/5.168 0 0 0 0

vii. Voltage transformer/CVT's 220kV (0.180 t per Structure) (0.170t per tower for structure+ 0.010 t per tower for Bolt & Nuts) No/t 12/2.16 6/1.08 0 0 0

viii. Voltage transformer 110kV (0.142 t per Structure) (0.131 t per tower for structure+ 0.011t per tower for Bolt & Nuts) No/t 6/0.852 0 0 0 0

ix. Lightening Arrestors 198kV (0.185 t per Structure) (0.180 t per tower for structure+ 0.005 t per tower for Bolt & Nuts) No/t 12/2.22 6/1.11 0 0 0

x. Lightening Arrestor 96kV (0.111t per Structure) (0.100t per tower for structure+ 0.011t per tower for Bolt & Nuts) No/t 30/3.33 0 0 0 0

xi. Post insulators for rigid bus 220 kV side (0.144 t per Structure) (0.1270t per tower for structure+ 0.017t per tower for Bolt &Nuts) No/t 78/11.232 24/3.456 0 0 0

xii.Post insulators for rigid bus 110 kV side (0.141t per Structure) (0.129t per tower for structure+ 0.012t per tower for Bolt &Nuts) No/t 96/13.536 0 0 0 0

xiii.For High post insulators for Transformers a) For 160MVA, Transformer (0.221MT/structure) 220kV side - 6 Nos 110kV side (6 Nos) - Bolted type foundation (0.221t per Structure)(0.204t per tower for structure+ 0.017t per tower for Bolt &Nuts) (b)For PT bay at level difference 220kV side-6Nos(0.218MT per tower)-6Nos c) 110/11kV transformer - 3 nos No/t 21/4.641 0 0 0 0

xiv Wave Trap 220kV, 0.5mH (0.3276t per tower) No/t 2/0.6552 2/0.6552 0 0 0

xv Pedestal insulators for wave trap 0.5mH, 2000A (0.144 MT per Structure) No/t 2/0.288 2/0.288 0 0 0

xvi.11kV UG cable terminating structure for 1CX 1000sq.mm cable (11kV side of 10MVA Power Transformer) (0.072 t per structure) (0.069 t per tower for structure+ 0.003 t per tower for Bolt &Nuts) No/t 1/0.072 0 0 0 0

xvii.11kV GOS/Cable terminating structures for 11kV Capacitor Bank (0.158 t per structure) (0.150 t per tower for structure+ 0.0075t per tower for Bolt &Nuts) No/t 1/0.1575 0 0 0 0

xviii.Street lighting lattice type structure along with GI pipe for fixing of LED lamp (0.182 MT + 5% B&N)-8.5 mtr height No/t 20/3.822 8/1.5288 0 0 0

III)110kV Mounting Structures at 110kV Dhulkhed S/s & Jigajevanagi S/S and Kerur S/s i) 110 kV Isolators Live point height 4600mm (0.752 t per tower) (0.726 t per tower for structure+ 0.026 t per tower including Bolt &Nuts) No/t 0 0 5/3.76 5/3.76 2/1.504

ii) 110 kV Current transformer (0.158 t per tower) (0.146 t per tower for structure+ 0.012 t per tower for Bolt & Nuts) No/t 0 0 9/1.422 9/1.422 3/0.474

iii) 110 kV Voltage transformer (0.148 t per tower) (0.137 t per tower for structure+ 0.011 t per tower for Bolt & Nuts) No/t 0 0 3/0.444 3/0.444 0

iv) 110 kV Lightening arrestors (0.116 t per tower) (0.105 t per tower for structure+ 0.011 t per tower for Bolt & Nuts) No/t 0 0 6/0.696 6/0.696 3/0.348

v) Pedestal insulators 110 kV for bus (0.140 t per tower) (0.127 t per tower for structure+ 0.013t per tower for Bolt &Nuts) No/t 0 0 6/0.846 6/0.846 3/0.423

vi) 110kV T type Rigid bus support Live point height 6350mm (0.635t per tower) (0.585 t per tower for structure+ 0.05t per tower for Bolt &Nuts) No/t 0.0000 0.0000 3/1.905 3/1.905 2/1.27

vii.Street lighting lattice type structure along with GI pipe for fixing of LED lamp (0.182t + 5% B&N)-8.5 mtr height No/t 0.0000 0 2/0.3822 2/0.3822 2/0.3822

SE42 Total Weight of Station structures & Mounting Structures Lighting Mast & Street Lighting Structure including Bolts & nuts for 220kV S/s (Chadchan, Indi S/s) as per technical specifications t 83.2842 32.9799 0 0 0 116.2641

SE43 Total Weight of Station structures & Mounting Structures Lighting Mast & Street Lighting Structure including Bolts & nuts for 110kV S/s 110kV Mounting Structures at 110kV Dhulkhed S/s & Jigajevanagi S/S and Kerur S/s as per technical specifications t 139.90 0.00 12.67 12.6692 6.0082 171.248

SE44 BUS BAR FORMATION : a) Formation of Main bus/cross bus (all the three phases in a segment) using Twin Moose Conductor with fixing of insulator spacers, levelling of string conductors to the required height above the equipment, including providing jumps to interconnect different segments of the main bus (Spacers to be used only for Double Conductor). 220kV Side-5 Bays Note: The scope also includes installing insulator strings complete with necessary Hardwares and stringing of the conductor / Earth wire etc as per specifications. Bay 5.00 2.00 0.00 0 0 7

SE45 BUS BAR FORMATION : a) Formation of Main bus/cross bus (all the three phases in a segment) using Single Moose ACSR Conductor with fixing of insulator spacers, levelling of string conductors to the required height above the equipment, including providing jumps to interconnect different segments of the main bus (Spacers to be used only for Double Conductor). 110kV Side-11 Bays Note: The scope also includes installing insulator strings complete with necessary Hardwares and stringing of the conductor / Earth wire etc as per specifications. Bay 11.00 0.00 2.00 2 2 17

SE46 I) RIGID BUS WITH TAPS & CLAMPS : i) Aluminium Tube conforming to 6340 WP of IS-5082 / 1969 (BS 1600-Sch.40) including fixing of clamp, connector jumper, corona ring etc., complete & as per technical specifications of following sizes. 100 mm size - 220kV side (618)mtrs) 100 mm size - 110kV side (624mtrs) mtrs 1242 0 0 0 0 1242

SE47 ii) 75mm size mtrs 0 0 60 60 30 150

SE48 iii)63 mm size for connecting isolator to vertical tap At proposed 220kV Chadchan S/s 220kV side-282mtrs 110kV Side-372mtrs At Dhulkhed, Jigajevangi & Kerur 110kV Side-36, 36 & 18 Mtrs mtrs 654 0 36 36 18 744

SE49 INSULATORS: Solid core Bus Post Insulator - Cylindrical Solid core Insulator as per IS:5350, Part-II & III & as per technical specification: 1) A)For 220kV side -2 units/stack (For Chadchan S/s) a) Post Insulators of Rigid Bus -78 Stacks b) Post insulator for wave trap 0.5mH, 2000A - 2 Stacks c) High level Post Insulators for 160MVA Tr -6 Stacks B) For 220kV side -2 units/stack (For 220kV Indi TB) a) Post Insulators of Rigid Bus -24 Stacks Stack 86 24 0 0 0 110

SE50 2) For 110kV side -1 unit/stack For Chadchan S/s a) Post Insulators of Rigid Bus -96Stacks b) High level Post Insulators for (160 MVA Tr -6 Nos,10MVA Tr -3Nos.) For Dhulkhed S/s a)Post Insulators of Rigid Bus -15Stacks For Jigajevangi S/s a)Post Insulators of Rigid Bus -15Stacks For Kerur ors of Rigid Bus -9Stacks Stack 105 0 15 15 9 144

SE51 Auxiliary Transformer: a) Supply of Station Auxiliary Transformer with copper windings & oil, cable termination type on both HT & LT, outdoor type, with off load tap changer in steps of 2.5 % as per technical specifications. 250 kVA, 11 kV/433 V, Auxiliary Transformers, 3 Ph, Delta / Star - Dyn11 No 2 0 0 0 0 2

SE52 LTAC Panel(Indoor) 1) LTAC panel (indoor ) as per technical specification comprising of voltmete & ammeter, 415V,LTAC Panel (2 I/C ACB 800A+2 O/G SFU 200A+8 O/G SFU 100A+14 O/G SFU 63 A +12 O/G SFU 32 A+1B/C SFU 800A+1DG C/O switch 300A) set 1 0 0 0 0 1

SE53 AC Distribution box (Outdoor) : a) AC distribution Box (outdoor):- double front type, 24 terminals, 1200 x 1350 x 600 mm, 2 I / C of 100 Amps, MCCB 20 KA + 24 O / G MCB 16 Amps + 2 O / G of 100 A, HRC fuse as per technical specifications. No 5.00 1.00 0.00 0.00 0.00 6

SE54 b) AC distribution Box single front type, 6 terminals 750 x 1350 x 300 mm , one I / C of 100 Amps MCCB 20 KA + 6 O / G MCB 16 A + 1 O / G of 100 A, HRC fuse as per technical specifications No. 3.00 0.00 0.00 0.00 0.00 3

SE55 c) AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type No. 0.00 0.00 1.00 1.00 1.00 3

SE56 LT Power Cable: Power cable from auxiliary transformer to LTAC panel, a) 1.1kV PVC insulated 240sqmm Al. cable 3.5 core with glands / lugs/ferruls. mtrs 100.00 0.00 0.00 0.00 0.00 100

SE57 b) 1.1 kV class PVC insulated Aluminium power cable (AC supply for lighting & DFDB/SFDB etc., 70 Sq mm, 3.5 core with glands / lugs / ferruls mtrs 4000.00 300.00 0.00 0.00 0.00 4300

SE58 b) 1.1 kV class PVC insulated Aluminium power cable 95 Sq mm, 4 core with glands / lugs / ferruls mtrs 0 0 200 200 200 600

SE59 b) 1.1 kV class PVC insulated Aluminium power cable 25 Sq mm, 4 core with glands / lugs / ferruls mtrs 0 0 200 200 200 600

SE60 b) 1.1 kV class PVC insulated Aluminium power cable 10 Sq mm, 4 core with glands / lugs / ferruls mtrs 0.00 0.00 200.00 200.00 200.00 600

SE61 STATION BATTERY & BATTERY CHARGER: A) STATION BATTERY SET : 1) 220V, 300 AH Battery set (Plante/Grid Type/Nickel Cadmium Type) with cells & accessories as per technical specifications. Set 2.00 0.00 0.00 0.00 0 2

SE62 B) BATTERY CHARGER : 1) Battery charger suitable for '2 X 220 V, 300 AH, with float (2 Nos) & float cum boost (2 Nos) type battery charger including control panels, change over arrangements etc., complete as per technical specifcation along with two separate DC distribution panel (indoor) 1I/C+20 O/G SFU 60 A+20 O/G SFU 30A. Set 1.00 0.00 0.00 0.00 0 1

SE63 PVC insulated Copper Control Cable with Lugs / Ferrules as per technical specifications. A) 1.1 kV class. Size of cable: 1) 19 Core 2.5 Sq.mm.Copper Control Cables km 10.00 3.00 0.25 0.25 0.15 13.65

SE64 2) 14 Core 2.5 Sq.mm.Copper Control Cables km 18.00 0.00 0.00 0.00 0.00 18

SE65 3) 10 Core 2.5 Sq.mm.Copper Control Cables km 5.00 1.50 0.00 0.00 0.00 6.5

SE66 4) 7 Core 2.5 Sq.mm.Copper Control Cables km 10.00 0.00 0.00 0.00 0 10

SE67 5) 4 Core 2.5 Sq.mm.Copper Control Cables km 15.00 1.50 0.70 0.70 0.4 18.3

SE68 6) 4 Core 6.0 Sq.mm.Copper Control Cables km 18.00 3.00 0.70 0.70 0.4 22.8

SE69 7)4 Core 16.0 Sq.mm.Copper Control Cables km 3.50 0.00 0.00 0.00 0.00 3.5

SE70 8)4 Core 4 Sq.mm.Copper Control Cables km 8.00 0.50 0.00 0.00 0.00 8.5

SE71 9) 2 Core 70 Sq.mm.Copper Control Cables km 0.20 0.00 0.00 0 0 0.2

SE72 10) 2 Core 6 Sq.mm.Copper Control Cables (For street lighting at Indi 220kV) km 0 1 0 0.26 0.235 2.035

SE73 11)2 Core 2.5 Sq.mm.Copper Control Cables km 0.00 0.00 0.05 0.05 0.05 0.15

SE74 B) Copper PVC Instrumentation Cable, Armoured (Screened Cable) Copper Cable with glands/ lugs/ferrules :1P X 0.5 Sq mm screened cable km 4.00 0.00 0.00 0.00 0.00 4

SE75 11 kV Switchgear:- 1) 11kV, 25KA, Metal Clad VCB Switchgear,1600A for 1 Incomer & 1250A for feeders (1I/C+6F+1CB +1AP) SAS compatible as per tchnical specification. Annunciator panel shall be simplex panel instead of desk type mentioned elsewhere in specification. Note: 1. The Remote Announciation cum Control panel is Simplex type. 2. The Electronic Trivector meters shall be as per technical specifications. 3.The switchgear for capacitor bank shall have necessary Over voltage / Under voltage / Circulating current relays and other protection relays as per specification. 4. The Switchgears Suitable for 10MVA,110/11kV Power Transformers. 5. The Switchgear will be supplied by KPTCL and the Bidder has to quote for complete scope of erection of Switchgear including moving the Switchgear from the point of unloading to the point of erection, erection of the complete Switchgear, wiring of Switchgear, testing & commissioning etc., complete. Set 1.00 0.00 0.00 0.00 0.00 1

SE76 11kV XLPE insulated UG Cable as per Technical specifications: a) 11 kV XLPE, 95 Sq mm Aluminium cable- 3 core (for 2 Auxiliary transformers from the 11KV switchgear) mtrs 500 0 0 0 0 500

SE77 b) 11 kV XLPE cable, 1000 Sq. mm Aluminium cable- 3 Runs per phase of 1CX1000 Sq.mm cable from 110/11KV Transformers to 11KV Switchgear. mtrs 500 0 0 0 0 500

SE78 c) 11 kV XLPE cable, 240 Sq. mm Aluminium cable- 3 core to be run from 11KV Switchgear to 11KV take off DP structure & 11KV Capacitor Bank. mtrs 400 0 0 0 0 400

SE79 Cable Termination Kit suitable for following sizes as per Technical specifications: A. Indoor type: a) Heat shrinkable type Cable termination kits suitable for 1C x 1000 Sq.mm XLPE cable No 6 0 0 0 0 6

SE80 b) Heat shrinkable type Cable termination kits suitable for 3C x 240 Sq.mm XLPE cable No 5 0 0 0 0 5

SE81 c) Heat shrinkable type Cable termination kits suitable for 3C x 95 Sq. mm XLPE cable No 4 0 0 0 0 4

SE82 B. Outdoor type: a) Heat shrinkable type Cable termination kits suitable for 1Cx 1000 Sq.mm XLPE cable No 6 0 0 0 0 6

SE83 b) Heat shrinkable type Cable termination kits suitable for 3Cx 240 Sq.mm XLPE cable No 5 0 0 0 0 5

SE84 c) Heat shrinkable type Cable termination kits suitable for 3C x 95 Sq.mm XLPE cable No 4 0 0 0 0 4

SE85 11kV Isolators & DP structure: 1) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank Set 1 0 0 0 0 1

SE86 2) 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR. Set 4 0 0 0 0 4

SE87 3) 9 kV, 10 KA surge arrestor with connector and clamp (for 4 feeders) Nos 15 0 0 0 0 15

SE88 4) Erection Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set . Set 4.00 0.00 0.00 0.00 0.00 4

SE89 5) 11kV DB Isolator, 400A, 25kA with LA (for Auxiliary Transformer) Set 2 0 0 0 0 2

SE90 6) Erection DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector meter complete set with all accessories for auxilliary transformer. Set 2 0 0 0 0 2

SE91 STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder) PVC Insulated Copper Control Cables : 2C x 6 sqmm, 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification. mtrs 8640 0 0 0 0 8640

SE92 PLCC equipments Note: PLCC equipment is provisioned for inter circuit coupling for 220kV Lines 1) Wave Trap with clamps 0.5 mH, 2000A,50kA dual band, 50 to 100kHz and 100 to 500kHz Pedastal type, along with PI & Hardwares(Ph-Ph coupling) with suitable terminal connectors Nos. 2.00 2.00 0.00 0.00 0.00 4

SE93 2) 40W single channel carrier terminal Nos. 1 1 0 0 0 2

SE94 3) Coupling device (LMU+LMDU) Set 1 1 0 0 0 2

SE95 4) HF Co axial cable 75 Ohms Kms 0.5 0.5 0 0 0 1

SE96 5) PLCC EPAX 16/8/8 No 1 0 0 0 0 1

SE97 6) Battery charger 48V, suitable for 400 AH Battery set No 2 0 0 0 0 2

SE98 7) Battery set 48V, 400 AH No 2 0 0 0 0 2

SE99 8) 48V DCDB with independent change over b/w DC Source 1 & DC Source 2,with 20 feeders. No 1 0 0 0 0 1

SE100 9) Digital Protection coupler 8 command with EI interface with 220V DC power supply No 2 0 0 0 0 2

SE101 SDH EQUIPMENT: 1) (STM-16 MADM UPTO 3 MSP PROTECTED DIRECTIONS)-BASE EQUIPMENT (COMMON CARDS, CROSS CONNECT/CONTROL CARDS,OPTICAL BASECARDS,POWER SUPPLY CARDS, POWER CABLING, OTHER HARDWARE AND ACCESSORIES INCLUDING SUB RACKS PATCH CORD, DDF ETC FULLY EQUIPPED EXCLUDING OPTICAL INTERFACE & TRIBUTARY CARDS. No 1 0 0 0 0 1

SE102 2) Cabinet Equipment to house SDH Equipment + Optical cards + Tributary Cards, Drop/Insert MUX Equipments and DACS Equipment Set 1 0 0 0 0 1

SE103 3) 220V DC to 48V DC CONVERTER for SDH equipment No 1 0 0 0 0 1

SE104 4) Routers for change over between OFC & VSAT communication for SCADA Data No 1 0 0.00 0.00 0.00 1

SE105 Materials for new bay integration to existing SCADA panel 1) Multi Functional Transducer (MFT) 0.2S class No. 0 0 2.00 2.00 1.00 5

SE106 2) Opto Coupler (220 or 110V DC) No. 0 0 2.00 2.00 1.00 5

SE107 Cables-Supplying a) Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core Mtrs 0 0 40.00 40.00 20.00 100

SE108 b) Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core Mtrs 0 0 40.00 40.00 20.00 100

SE109 c) Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core Mtrs 0.00 0.00 50.00 50.00 25.00 125

SE110 d) Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core Mtrs 0.00 0.00 50.00 50.00 25.00 125

SE112 Earthmat Formation: 1) Supplying and laying of MS.Flat 75 x 12 mm flat welding and applying ACB paint to welded portion as per drawing/standards, if required (all other materials to be supplied by contractor). Rmtr 12339 0 0 0 0 12339

SE113 2) Supplying and laying of MS.Flat 50 x 6 mm flat welding and applying ACB paint to welded portion & covering with Sodium Bentonite clay) as per drawing/standards, if required (all other materials to be supplied by contractor). Rmtr 0 703 0 0 0 703

SE114 3) Supplying and Grounding of equipment with 75 X 12 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecting by welding (inclusive of all T&P and consumables) to the earthmat/ground pit/point of earth connection, all the materials supplied by the contractor. Rmtr 8384 0 0 0 0 8384

SE115 4) Supplying and Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecting by welding (inclusive of all T&P and consumables) to the earthmat/ground pit/point of earth connection, all the materials supplied by the contractor. Rmtr 0 1185 920 920 205 3230

SE116 5) Providing 25mm dia M.S.Rod 1.05m long earthmat spikes including heating, bending top 50mm overlap flattening and making spike edge at one end driving into the earth below the ground level and welding the rod with ground mat flat with necessary earth work. No 0 12 0 0 0 12

SE117 6) Providing 40mm dia M.S.Rod 1.075m long earthmat spikes including heating, bending top 50/75mm overlap flattening and making spike edge at one end driving into the earth below the ground level and welding the rod with ground mat flat with necessary earth work. No 132 0 0 0 0 132

SE118 7) Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron welding electrodes as per drawing including the cost of excavation (All materials to be supplied by the contractor) Set 99 16 9 9 3 136

SE119 8) Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc., Each 99 16 9 9 3 136

SE120 iii. 110kV Bay equipments : a) Releasing & re-erection of existing 110kV PT Isolator No 0 0 1 1 0 2

SE121 Releasing & re-fixing of existing 110kV PT (For making space for proposed line TB) No 0 0 3 3 0 6

SE122 Dismantling of existing Portion: i) Dismantling of existing 220kV Suspension wave trapstructure No 2 2

SE123 ii) Dismantling of existing 110kV PT mounting structure(0.111MT/structure) t 0.333 0.333 0.666

SE124 iii) Dismantling of existing 110kV Isolator( of PT) mounting structure(0.564MT/structure) Note : 1) The Released materials shall be transported to the nearest Project division Stores of KPTCL. 2)The rates quoted for releasing/dismantling shall also include the charges for loading, transportation to KPTCL stores and unloading. 3) Before Commencing the dismantling Work, Items wise Inventory of the Equipments / Materials to be Dismantled are to be prepared jointly with the Engineer In-Charge, which is to be got approved by the respective Superintending Engineer (Elec), Projects, KPTCL. 4) Quantity mentioned here is indicative payment will be made as per actuals. Payment will be made only for the actual weight of towers/conductor length/earth wire length which are dismantled. t 0.5640 0.564 1.128

1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, 9th Floor, KPTCL, Indhnana Bhavana, Bangalore.

2. Released materials shall be transported to the nearest Major Works Store of KPTCL without any additional cost as per the directions of the Engineer in charge of the work.

3. The Erection charges shall include transportaion to site, loading and unloading.

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 4 Price Break up for Supply of MANDATORY SPARES

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Sl No. Name of the Equipment/Materials Unit Quantity Indicate whether "Own manufactured Item" or "Bought Out Item" Indicate country of Origin

SM1 Mandatory Spares: I) Power transformer (160MVA,220/110kV) 1) Oil Collecting bottle Nos. 3

SM2 2) Terminal connector clamps a. Suitable for 245kV class bushing to suit single Moose ACSR Nos. 3

SM3 b. Suitable for 110kV class bushing to suit single Moose ACSR conductor Nos. 3

SM4 3) Valves a. Drain valve (100mm to 200mm size) Nos. 1

SM5 b. Top/Bottom filter valve (50mm to 100mm size) Nos. 2

SM6 c. Top/Middle/Bottom Oil sampling valve with plug (15 to 25mm) Nos. 3

SM7 d. Header pipe valve Nos. 1

SM8 e. Gate/Butterfly valves of various sizes ranging from 50mm to 200mm Set 1

SM9 4) MOG Nos. 1

SM10 5) Prismatic Gauge Nos. 1

SM11 6) Starters, contactors, relays Set 1

SM12 7) Pressure Relief Device (PRD or PRV) Nos. 1

SM13 8) Oil Surge relay Nos. 1

SM14 9) Bucholtz relay Nos. 1

SM15 10) Tap position indicator Nos. 1

SM16 11) Fixed and moving contacts for diverter switch Set 1

SM17 12) Fixed and moving conatcts for selector switch 220kV and above class Set 1

SM18 13) WTI with 4 contatcs, 15 meters capillary length with built in CCU RTD and external remote indicator, range 0-150 deg C with SCADA/SAS compatibility Set 1

SM19 14) OTI with 2 contacts, 15 meters capillary length with built in CCU RTD and external remote indicator range 0-150 deg C with SCADA /SAS compatibility Set 1

SM20 15) PT 100 sensor along with probe of suitable lengths Set 1

SM21 Power transformer (10MVA,110/33-11kV) 1) Oil Collecting bottle Nos. 3

SM22 2) Terminal connector clamps Suitable for 110kV class bushing to suit Moose conductor Nos. 3

SM23 3) Valves a. Drain valve (100mm to 200mm size) Nos. 1

SM24 b. Top/Bottom filter valve (50mm to 100mm size) Nos. 2

SM25 c. Top/Middle/Bottom Oil sampling valve with plug (15 to 25mm) Nos. 3

SM26 d. Header pipe valve Nos. 1

SM27 e. Gate/Butterfly valves of various sizes ranging from 50mm to 200mm Set 1

SM28 4) MOG Nos. 1

SM29 5) Prismatic Gauge Nos. 1

SM30 6) Starters, contactors, relays Set 1

SM31 7) Pressure Relief Device (PRD or PRV) Nos. 1

SM32 8) Oil Surge relay Nos. 1

SM33 9) Bucholtz relay Nos. 1

SM34 10) Tap position indicator Nos. 1

SM35 11) Fixed and moving contacts for diverter switch Set 1

SM36 12) WTI with 4 contatcs, 15 meters capillary length with built in CCU RTD and external remote indicator, range 0-150 deg C with SCADA/SAS compatibility Set 1

SM37 13) OTI with 2 contacts, 15 meters capillary length with built in CCU RTD and external remote indicator range 0-150 deg C with SCADA /SAS compatibility Set 1

SM38 14) PT 100 sensor along with probe of suitable lengths Set 1

SM39 II) Circuit Breaker (CB) 1) Closing coil with resistor a) for 220kV CB No 1

SM40 b) for 110kV CB No 1

SM41 2) Tripping coil with resistor a) for 220kV CB No 1

SM42 b) for 110kV CB No 1

SM43 3) Terminal Pad a) for 220kV CB Set 1

SM44 b) for 110kV CB Set 1

SM45 4) Terminal connector a) for 220kV CB Set 1

SM46 b) for 110kV CB Set 1

SM47 5) SF6 gas cylinders filled with SF6 gas suitable for 1 no of CB(220kV CB,110kV & 66kV CB) Set 1

SM48 III) Isolator 1) Copper contact finger male & for female a) For 220kV (1250A &3000A rating each 01No.) Set 2

SM49 b) For 110kV (1250A &3000A rating each 01No.) Set 2

SM50 2) Terminal Connector a) For 220kV (1250A &3000A rating each 01No.) Set 2

SM51 b) For 110kV (1250A &3000A rating each 01No.) Set 2

SM52 3) Terminal Pad a) For 220kV (1250A &3000A rating each 01No.) Set 2

SM53 b) For 110kV (1250A &3000A rating each 01No.) Set 2

SM54 4) Relays Panel spares i) All type of numerical relays set 1

SM55 ii) Tripcircuit supervision relay(2Nos) set 2

SM56 iii) Self reset trip relay [1No. each type] set 1

SM57 iv) Hand reset trip relay[1No. each type] set 1

SM58 v) Timer relay [1No. each type] set 1

SM59 vi) DC supervision relays set 1

SM60 vii) Flag relays [1No. each type] set 1

SM61 viii) Auxillary relays [1No. each type] set 1

SM62 V) Mandatory spares for SAS 1) Bay control unit with configuration software Set 2

SM63 2) Ethernet switch of each type No 1

SM64 3) Optical fiber cable of longest length No 1

SM65 VI) Maintenance & Testing equipment: i) Fully automatic Tan delta & capacitence test kit set 1

SM66 ii) Portable dissolved gas analyser set 1

SM67 iii) SF6 gas filling adaptor kit for circuit breaker set 1

SM68 iv) Micro ohm meter (1.0 micro-ohm to 199.99micro ohm) (Approved Vendor) no. 1

SM69 v) BDV test kit (Digital) (Approved Vendor) Set 1

SM70 vi) Circuit Breaker operational analyzer-DCRM (Approved Vendor) Set 1

SM71 vii) Numerical relay testing kit (Approved Vendor) set 1

SM72 viii) Digital DC insulation tester-5kV (Approved Vendor) Set 1

SM73 ix) Online DC earth fault locator with built-in charger & rechargeable batteries (Approved Vendor) Set 1

SM74 x) Combined CT & VT analyzer Set 1

1. Supply of equipment/materials and the Erection charges shall include loading and unloading.

2. The prices for all the materials shall be quoted in the Percentage rate finanacial bid.

3. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3BI(i) - Price Breakup for - Line Supply portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhana Bhavana, BANGALORE - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Line Supply Portion:

Sl.No Name of the Equipment/Materials Unit Quantity Unit Weights of KPTCL Design towers in tonne (T) Unit Weights of Design based towers in tonne (T) TOTAL Weights of KPTCL Design towers in tonne (T) TOTAL Weights of Design based towers in tonne (T) Indicate whether "Own manufactured Item" or "Bought Out Item" Indicate country of Origin

220kV DC Line (Sindhanuru to Tekkalakote) 39.853km 220kV DC line (Somasamudra to Tekkalakote) 20.034km 110kV 2nd CKT Line (Kurugodu-Siruguppa SC Line to Siruguppa) 47.318km 110kV DC LILO Line (Kurugodu-Siruguppa and Sirigera-Tekkalakote Lines to Prop. Tekkalakote S/s) 3.531km 110kV LILO Line (Kurugodu-Siruguppa Line to Sirigere Cross) 4.309km Total Quantity HT MS Bolts & Nuts HT MS Bolts & Nuts Total Weights of HT Total Weights of MS Total Weights of Bolts & Nuts Total Weights of HT Total Weights of MS Total Weights of Bolts & Nuts

TOWERS: Fabrication, Proto Type Inspection and Supply of galvanised 220kV & 110kV Towers,Bolts & Nuts as per Technical Specification. Note : Rate to be quoted as per tonne basis. I) 220 kV Double Circuit Towers with Design Code- L&T Gadag-Bagalkot DC Line. KPTCL -2D-GDG A) Tower type 220kV 'DA' a) 220kV Normal Tower No/t 71 71 0.9630 2.9580 0.2240 68.3730 210.0180 15.9040

c)+6mtr Body Extension only No/t 12 12 0.3030 0.7150 0.0430 3.6360 8.5800 0.5160

d)+9mtr Body Extension only No/t 0 0 0.6260 1.1140 0.0840 0.0000 0.0000 0.0000

d)+12mtr Body Extension only No/t 0 0 0.7110 1.4600 0.1000 0.0000 0.0000 0.0000

e) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 71 71 0.1500 10.6500 0.0000 0.0000

f) Stub for +9 mtr +12 Mtr extension towers No/t 0 0 0.1700 0.0000 0.0000 0.0000

B) Tower type 220kV 'DB' a) 220kV Normal Tower No/t 22 22 2.2370 3.4270 0.2500 49.2140 75.3940 5.5000

b)+3mtr Body Extension only No/t 14 14 0.3980 0.6360 0.0550 5.5720 8.9040 0.7700

c)+6mtr Body Extension only No/t 5 5 0.5460 1.0470 0.0780 2.7300 5.2350 0.3900

d)+9mtr Body Extension only No/t 0 0 0.9900 1.5360 0.1150 0.0000 0.0000 0.0000

e) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 22 22 0.2270 4.9940 0.0000 0.0000

e) Stub for Normal Tower,+9 mtr +12 Mtr extension towers No/t 0 0 0.2750 0.0000 0.0000 0.0000

C) Tower type 220kV 'DC' a) 220kV Normal Tower No/t 15 15 2.6190 3.6140 0.3100 39.2850 54.2100 4.6500

b)+3mtr Body Extension only No/t 11 11 0.3280 0.7700 0.0510 3.6080 8.4700 0.5610

c)+6mtr Body Extension only No/t 1 1 0.5000 1.2840 0.0840 0.5000 1.2840 0.0840

d)+9mtr Body Extension only No/t 0 0 0.8000 1.9410 0.0950 0.0000 0.0000 0.0000

e) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 15 15 0.2780 4.1700 0.0000 0.0000

f) Stub for +9 mtr +12 Mtr +15 mtr +18 mtr extension towers No/t 0 0 0.3100 0.0000 0.0000 0.0000

D) Tower type 220kV 'DD' a) 220kV Normal Tower No/t 12 12 3.8590 3.1520 0.3000 46.3080 37.8240 3.6000

b)+3mtr Body Extension only No/t 3 3 0.4280 0.9800 0.0630 1.2840 2.9400 0.1890

c)+6mtr Body Extension only No/t 3 3 0.7100 1.4570 0.0850 2.1300 4.3710 0.2550

d)+9mtr Body Extension only No/t 0 0 1.1700 2.0900 0.1200 0.0000 0.0000 0.0000

e)+12mtr Body Extension only No/t 3 3 1.7810 3.3880 0.1880 5.3430 10.1640 0.5640

f)+15mtr Body Extension only No/t 1 1 2.4220 3.7800 0.2170 2.4220 3.7800 0.2170

g)+18mtr Body Extension only No/t 0 0 2.7910 4.7780 0.2700 0.0000 0.0000 0.0000

h) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 8 8 0.3250 2.6000 0.0000 0.0000

i) Stub for +9 mtr +12 Mtr, +15 Mtr, +18 Mtr extension towers No/t 4 4 0.3600 1.4400 0.0000 0.0000

II) 220kV 'MC-A'220KV DC Narrow Based Tower (KPTCL-2D-NB-NRS) a) 220kV Normal Tower No/t 2 2 4.3250 6.3510 0.4040 8.6500 12.7020 0.8080

b)+3mtr Body Extension only No/t 0 0 0.0000 0.0000 0.0000

c)+6mtr Body Extension only No/t 0 0 0.0000 0.0000 0.0000

d) Stub for Normal Tower,+3 mtr +6 Mtr extension towers No/t 2 2 1.2710 0.1000 0.0020 2.5420 0.2000 0.0040

III) Fabrication,Proto Assembly Inspection and supply of design based galvanised Steel Pole Structure of 220kV DC Monopole 2P3+3M (including Cross arm, base plate with anchor bolts, anticlimbing device, step bolts and bolt & nuts, ladder and all other equipment complete as per technical specification). ( To be designed for the Subject Work) i) 220 kV - Monopole type 2P3+3M(30° to 60°/ DE(0°-15°) (Note: Bidder Should indicate the weight of monopole, which is inclusive of normal Body, Body Extn and Bolt & nuts, etc) No/t 3 3 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000

iV) Gantry Structure - Comprising of 3 Nos of 2T1 ( 1.578 MT per Tower) and 2 Nos of 2B1 (1.695 MT per Beam)- MS Portion No/t 0 4.7340 3.390 0.0000 0.0000 0.0000

VI)110KV DC Towers with Design Code: KPTCL-1D-AQUS A) DC 'A' Type Tower a) Normal Tower Type DA' No/ t 68 13 45 18 144 0.942960 1.911000 0.135450 135.7862 275.1840 19.5048

e) Stubs for 'DA' Type Tower for Normal, +3mtr Extension, +6mtr Extension No/ t 68 12 45 18 143 0.147000 0.003240 21.0210 0.0000 0.4633

f) Stubs for 'DA' Type Tower for Normal, +9mtr Extension, +12mtr, +15mtr, +18mtr, +24mtr Extension No/ t 0 1 0 0 1 0.210080 0.004320 0.2101 0.0000 0.0043

B) DC 'B Type Tower a) Normal Tower Type DB' No/ t 16 4 14 2 36 1.587900 2.058680 0.181350 57.1644 74.1125 6.5286

d) Stubs for 'DB' Type Tower for Normal, +3mtr Extension, +6mtr Extension No/ t 16 4 14 2 36 0.210440 0.004860 7.5758 0.0000 0.1750

C) DC 'C' Type Tower a) Normal Tower Type DC' No/ t 13 3 7 6 29 2.044900 1.862020 0.203680 59.3021 53.9986 5.9067

d) Stubs for 'DC' Type Tower for Normal, +3mtr Extension, +6mtr Extension No/ t 13 3 7 6 29 0.236880 0.004860 6.8695 0.0000 0.1409

d) Auxiliary Cross arm ( 3rd Cross arm ) only No/ t 0 0 0 0 0.306140 0.118630 0.021570 0.0000 0.0000 0.0000

e) Stubs for 'DD' Type Tower for Normal, +3mtr Extension, +6mtr Extension No/ t 8 6 9 11 34 0.301560 0.006860 10.2530 0.0000 0.2332

e) Stubs for 'DD' Type Tower for +9mtr Extension, +12mtr Extension, +15 mtr extension No/ t 2 0 2 0 4 0.301560 0.006860 1.2062 0.0000 0.0274

LS1 Total weight of fabricated, galvanised Towers (High Tensile Steel) excluding Bolt & Nuts. (220 kV Towers -147Nos+ 49Nos=196Nos) as per technical specifications Note : Rate to be quoted as per tonne basis. t 278.5410 0.0000 0.0000 0.0000 0.0000 278.541 278.5410

LS2 Total weight of fabricated, galvanised Towers (Mild Steel) excluding Bolt & Nuts. (220 kV Towers) as per technical specifications Note : Rate to be quoted as per tonne basis. t 466.4060 0.0000 0.0000 0.0000 0.0000 466.4060 466.4060

LS3 Total weight of galvanised Bolt & Nuts. (220 kV Towers) as per technical specifications Note : Rate to be quoted as per tonne basis. t 35.9370 0.0000 0.0000 0.0000 0.0000 35.9370 35.9370

LS4 Total weight of fabricated, galvanised Towers Towers (High Tensile Steel) excluding Bolt & Nuts. (110 kV Towers - 27Nos+18Nos+21Nos+4Nos=70Nos) as per technical specifications Note : Rate to be quoted as per tonne basis. t 0.0000 180.4246 53.4512 141.2719 76.9560 452.1037 452.1037

LS5 Total weight of fabricated, galvanised Towers Towers (Mild Steel) excluding Bolt & Nuts. (110 kV Towers) as per technical specifications Note : Rate to be quoted as per tonne basis. t 0.0000 228.1019 56.6780 169.6954 74.1466 528.6219 528.6219

LS6 Total weight of galvanised Towers Bolt & Nuts. (110 kV Towers) as per technical specifications Note : Rate to be quoted as per tonne basis. t 0.0000 18.7739 4.9868 14.0983 6.8496 44.7086 44.7086

LS7 III) Fabrication,Proto Assembly Inspection and supply of design based galvanised Steel Pole Structure of 220kV DC Monopole 2P3+3M (including Cross arm, base plate with anchor bolts, anticlimbing device, step bolts and bolt & nuts, ladder and all other equipment complete as per technical specification). ( To be designed for the Subject Work) i) 220 kV - Monopole type 2P3+3M(30° to 60°/ DE(0°-15°) (Note: Bidder Should indicate the weight of monopole, which is inclusive of normal Body, Body Extn and Bolt & nuts, etc) t 0.0000 0.0000 0.0000

LS8 Tower Accessories: 1) Number Plates Nos 125 107 26 77 37 372

LS9 2) Danger Board Nos 125 107 26 77 37 372

LS10 3) Circuit Plates Nos 250 214 52 77 74 667

LS11 4) Phase Plates (Set of 6 Nos.) for 220kV Set 125 0 0 0 0 125

LS12 5) Phase Plates (Set of 3 Nos.) for 110kV Set 0 214 52 77 74 417

LS13 6) Earth Bonds 300mm long Nos 71 68 13 45 18 215

LS14 7) Earth Bonds 450mm long Nos 54 39 13 32 19 157

LS15 Conductors: i) AAAC MOOSE Conductor with 1.5% Sag km 180.4345 0.000 0.000 0.000 0.000 180

LS16 ii) Lynx ACSR with 1.5% Sag km 51.5214 51.5214

LS17 ii) Panther ACSR with 1.5% Sag km 166.3605 35.5839 58.3422 260.2866

LS18 iii)7/3.15mm Ground wire with 1.5% Sag km 27.7276 5.9306 19.4474 8.5869 61.6925

LS19 I) Insulators Strings suitable for AAAC MOOSE Conductors as per technical specifications. A. Single Tension insulator strings consisting of any one of the following: a. Insulator strings consisting of 1X16nos. of 220kV, 120kN Disc insulators. OR b. Porcelain long rod insulator string equivalent to 1X16nos. of 220kV, 120kN Disc insulators. OR c. 220kV, 120kN Silicon Rubber Composite Polymer long rod insulator with sectional length-2175mm Stack 798 798

LS20 B. Single Suspension insulator strings consisting of any one of the following: a. Insulator strings consisting of 1X14nos. of 220kV, 90kN Disc insulators. OR b. Porcelain long rod insulator string equivalent to 1X14nos. of 220kV, 90kN Disc insulators. OR c. 220kV, 90kN Silicon Rubber Composite Polymer long rod insulator with sectional length-2030mm Stack 516 516

LS21 II) Insulator strings suitable for LYNX ACSR/PANTHER Conductors as per technical specifications: A. Single Tension insulator strings consisting of any one of the following: a. Insulator string consisting of 1X8nos. of 110kV, 90kN Disc insulators. OR b. Porcelain long rod insulator string equivalent to 1X8nos. of 110kV, 90kN Disc insulators. OR c. Silicon rubber composite insulator equivalent to 1X8nos. of 110kV, 90kN Disc insulators with sectional length-1160mm Stack 564 168 222 252 1206

LS22 B. Single Suspension insulator strings consisting of any one of the following: a. Insulator string consisting of 1X7nos. of 110kV, 90kN Disc insulators. OR b. Porcelain long rod insulator string equivalent to 1X7nos. of 110kV, 90kN Disc insulators. OR c. 110kV, 90kN Silicon rubber composite Polymer long rod insulator equivalent to 1X7nos. of 110kV, 90kN Disc insulators with sectional length-1015mm NOTE: 1. All the Insulator strings and hardware fittings quoted by the bidder shall be of the same type i.e. all the Insulator strings and hardware fittings shall be of Disc Insulators type OR all the Insulator strings and hardware fittings shall be of Polymeric Composite Insulators type OR all the Insulator strings and hardware fittings shall be of Long rod insulator. Bidder shall quote either for Disc Insulators type OR for Composite Insulators type OR for Long rod insulator and not for all the types. Stack 492 99 153 129 873

LS23 III) Insulator Hardwares & Clamps suitable for AAAC MOOSE Conductor as per Technical Specification: i) Compression type Single Tension Clamp (excluding Disc Insulators) with hardware and arcing horns suitable for 1x16nos. of 220kV, 120kN insulator to suit AAAC MOOSE conductor. Nos 498 0 0 498

LS24 ii) Compression type Double Tension Clamp (excluding Disc Insulators) with hardware and arcing horn suitable for 2x16nos. of 220kV, 120kN insulator to suit AAAC MOOSE conductor Nos 150 0 0 150

LS25 iii) Compression type Single Suspension Clamp(excluding Disc Insulators) with hardware and arcing horn suitable for 1x14nos. of 220kV, 120kN insulator to suit AAAC MOOSE conductor. Nos 336 0 0 336

LS26 iv) Compression type Double Suspension Clamp (excluding Disc Insulators) with hardware and arcing horn suitable for 2x14nos. of 220kV, 120kN insulator to suit AAAC MOOSE conductor. Nos 90 0 0 90

LS27 IV) Insulator Hardwares & Clamps suitable for Lynx ACSR Conductor as per Technical Specification: i) Compression type Single Tension Clamp (excluding Disc Insulators) with hardware and arcing horn suitable for 1x8nos. of 110kV, 90kN insulator to suit Lynx ACSR conductor . Nos 0 0 216 216

LS28 ii) Compression type Double Tension Clamp (excluding Disc Insulators) with hardware and arcing horn suitable for 2x8nos. of 110kV, 90kN insulator to suit Lynx ACSR conductor. Nos 0 0 18 18

LS29 iii) Compression type Single Suspension Clamp (excluding Disc Insulators) with hardware and arcing horn suitable for 1x7nos. of 110kV, 90kN insulator to suit Lynx ACSR conductor. Nos 0 0 93 93

LS30 iv) Compression type Double Suspension Clamp (excluding Disc Insulators) with hardware and arcing horn suitable for 2x7nos. of 110kV, 90kN insulator to suit Lynx ACSR conductor. NOTE: All the Insulator strings and hardware fittings quoted by the bidder shall be of the same type i.e. all the Insulator strings and hardware fittings shall be of Disc Insulators type OR all the Insulator strings and hardware fittings shall be of Polymeric Composite Insulators type OR all the Insulator strings and hardware fittings shall be of porcelain Long rod insulator. Bidder shall quote either for Disc Insulators type OR for Composite Insulators type OR for Long rod insulator and not for all the types. Nos 0 0 18 18

LS31 B) Hardwares and Clamps for conductor with Arcing Horns suitable for Panther ACSR Condyctor:. i)110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Single Tension String fittings for Panther ACSR Nos 372 168 174 714

LS32 ii)110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Double Tension String fittings for Panther ACSR Nos 96 0 24 120

LS33 iii) 110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Single Suspension String fittings for Panther ACSR Nos 324 75 117 516

LS34 iv) 110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Double Suspension String fittings for Panther ACSR Nos 84 12 18 114

LS35 ACCESSORIES for ACSR Conductors & Ground Wires: A. AAAC MOOSE Conductor a) Mid span compression joint Nos 90 0 0 90

LS36 b) Repair sleeves Nos 30 0 0 30

LS37 c) Vibration Dampers Nos 1500 0 0 1500

LS38 d) Preformed armour rod Nos 426 0 0 426

LS39 B.LYNX ACSR Conductor a)Mid span compression joint Nos 0 0 26 26

LS40 b)Repair sleeves Nos 0 0 26 26

LS41 c)PG Clamps Nos 0 0 228 228

LS42 d)Vibration Dampers Nos 0 0 444 444

LS43 e)Pre formed armour rods Nos 0 0 108 108

LS44 Accessories for Panther ACSR Conductor : i) MSC Joints suitable Nos 110 10 58 178

LS45 ii)Pre formed armour rod Nos 408 78 135 621

LS46 iii)Repair sleeves suitable Nos 50 15 29 94

LS47 iv)P G Clamps suitable Nos 468 156 192 816

LS48 v)Vibration dampers Nos 1284 312 462 2058

LS49 III) Ground Wires. a) M S C Joints Nos 22 12 8 4 46

LS50 b) Repair sleeves Nos 10 6 8 4 28

LS51 c) P G Clamps Nos 78 26 64 38 206

LS52 d) Single Tension clamps Nos 78 26 64 38 206

LS53 e) Single Suspension clamps (bolted type) Nos 68 13 45 18 144

LS54 OPGW & Accessories as per technical specifications : A) OPGW cable: 1.48 Fibre (DWSM) OPGW fibre optic cable for 220kV LILO line ( inclusive of conductor offline stringing). km 30.470 30.4700

LS55 2.Suspension Clamp Assembly for 48 fibre OPGW Nos 72 72

LS56 3.Tension fitting Assembly for 48 fibre OPGW including all accessories for joint box (splicing location) Nos 9 9

LS57 4.Tension Assembly for dead end for 48 fibre OPGW Set 1 1

LS58 5.Tension Assembly -Double Tension pass through for 48 fibre OPGW Nos 36 36

LS59 6.Vibration dampers for 48 fibre OPGW Nos 234 234

LS60 7.Down lead clamp assembly for 48 fibre OPGW Nos 57 57

LS61 8.Joint box for 48 fibre OPGW Nos 13 13

LS62 9.Tension fiiting Assembly on suspension tower for 48 fibre OPGW including all accessories for joint box (splicing location) Nos 1 1

LS63 FODP 48F : Indoor type consisting of 2 nos. of rack mounted LIU to be housed in FODP with 24 ports each with FCPC coupling & pigtails. Nos 1 1

LS64 C) Fibre Optic Approach Cable: 48 Fibre (DWSM) -Including installation hardware set for 48 fibre approach cable as per technical specifications. km 0.50 1

NOTE: 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, KPTCL,9th Floor, Indhana Bhavana, Bangalore.

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same by KPTCL.

3. Supply of equipment/materials shall include transportation to the site, loading and unloading.

4. The Bidders shall start the line work from both the ends simultaneously by deploying more number of gangs as the ‘ROW’ issues which may crop-up can be addressed in parallel on both segments. The bidders shall take note of the same before quoting.

5. The Bidder shall take necessary action to ensure that all the materials supplied shall be properly housed to ensure satisfactory commissioning.

6. The prices for all the materials shall be quoted in the Percentage rate finanacial bid.

7. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”.

8. Design of Towers: In ‘Itemwise Financial offer’ in e-procurement portal, Bidder shall indicate their design based Monopoles Ceiling weights & Monopoles foundation volumes under ‘Bidder Quantity’ within the indicated Minimum and Maximum Quantity. Further in the Techno-commercial sheets, Bidder shall indicate design based Monopoles Ceiling weights, which is inclusive of normal Body, Body Extn and Bolt & nuts,etc & Monopoles foundation volumes as per technical specifications for the each type of Monopoles indicated below: 220kV DC Monopole 2P3+3M (including Cross arm, base plate with anchor bolts, anticlimbing device, step bolts and bolt & nuts, ladder and all other equipment complete as per technical specification)

9.It shall be noted that, the ceiling weight of Monopoles and Monopole foundation volumes indicated in the Techno-commercial sheets and ‘Itemwise Financial offer’ in e-procurement portal shall be the same.

10.In case of any discrepancies noticed between ceiling weights and total foundation volumes of monopoles indicated in “Item-wise Financial offer” and Techno-commercial sheets, the weights and total foundation volumes of monopoles quoted in KPP Portal shall be considered for finalization of respective design based Monopoles.

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3BI(ii) - Price Breakup for -Line Erection portion including Dismantling

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhana Bhavana, BANGALORE - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Line Erection Portion including Dismantling Works

Sl. No. Name of the Equipment/Materials Unit Quantity

220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadchan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose ACSR conductor 110 KV DC line from proposed 220kV chadchan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317 kms using Panther conductor 110kV DC LILO Line proposed 220kV chadchan(Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor 110 KV LILO line from existing 110KV Zalki-Chadchan line to proposed 220kV chadchan(Devarnimbaragi ) station using Lynx conductor for a distance of 8.460kms Total Quantity

LE1 Check Survey and Towers Spotting. i. Check survey using their own equipment for 220kV Plain terrain (Conducting detailed check survey along the approved route duly following the route alignment, GPS Co-ordinates, submission of detailed line schedule, tower schedule, land schedule and comparing the same with respect to detailed survey report, bringing out the differences if any. Submission of contour maps for undulated/hilly tower. The work also includes marking corridor width in the field and computing the quantum of benching and revetment, preparation of detailed land schedule along the corridor on the digitized Revenue village maps indicating the Sy. Nos. falling within the corridor for the purpose of estimation of the land compensation) km 29.628 29.628

LE2 ii. Check survey using their own equipment for 110kV Plain terrain (Conducting detailed check survey along the approved route duly following the route alignment, GPS Co-ordinates, submission of detailed line schedule, tower schedule, land schedule and comparing the same with respect to detailed survey report, bringing out the differences if any. Submission of contour maps for undulated/hilly tower. The work also includes marking corridor width in the field and computing the quantum of benching and revetment, preparation of detailed land schedule along the corridor on the digitized Revenue village maps indicating the Sy. Nos. falling within the corridor for the purpose of estimation of the land compensation) Note: 1.The survey covers the scope as defined in Technical Specifications & As per volume VI of Common UNI SR 2023-24 & Tender Documents. 2.In accordance with Circular No. KPTCL/B19/345/84-85 dated 23.02.2024, the Contract Agency has to submit all the required survey data in GIS mapping format before submission of the final bills in the event of award as per the Annexure XIX and in case of additions/modifications/re-routing of existing Transmission lines, the modified survey details in GIS mapping format shall be submitted by the Contract Agency to the respective Superintending Engineers/Executive Engineers, Projects, KPTCL as and when the works are executed. km 27.317 5.843 19.16 8.46 60.780

LE3 Conducting DRONE SURVEY of Transmission Lines for collection of data along with Aeria linspection of EHV Line Corridor using LIADR method for measurement of Vertical, horizontal and ground clearances of the LT/HT/EHV/ P&T lines, major road/railway/river crossing, building, vegetations etc., which is found to cross or running in parallel with the KPTCL EHV lines and sag measurements and other works. The rates include to collect details such as, • Vegetation growth close to conductor along the width of corridor with measurements • Building/construction violation along the corridor with measurements • Clearance measurement of Roads/Railways. River crossings • Clearance measurement of EHV/Power line crossings (up and down) • Clearance measurements of tower elements (Hang point & Ground point measurement) • Sag measurement of each span of the line all phases • Location of tower (GPS coordinates), type of tower, height of tower, span length and conductor type • Angle of deviation of tower • Submission of detailed consolidated final report for surveying work done appending all the above details including all relevant information collected during survey certificates of the instruments used for the work, photos/videos taken at site and submitting soft copies and hard copy of all documents & reports in 3 sets. Note: 1) The minimum requirement of LiDAR camera is as follows point cloud with RGB mapping Accuracy of +/-25cm ability to gather minimum of 75 points/sqmtr. 2) Patrolling shall at least cover the minimum corridor area as per the voltage classes. km 29.628 27.317 5.843 19.16 8.46 90.408

LE4 Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications. Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent towers in between, including providing stays at each anchor points and jointing of conductors, hoisting and fixing of insulator string along with conductor accessories, armour rods, vibration dampers, including the cost of T&P materials like comealong, wire ropes, pulley, rollers, suspension clamps, compression jointing machines with bits, drum stands, manila ropes, truckker and jeep etc., Note :- The tenderers are required to quote the rates taking into consideration the charges for loading and unloading of ACSR conductor/Ground Wire, Insulators and Hardwares. 1. AAAC MOOSE Conductor Plain Terrian km 180.4345 180.435

LE5 2. Lynx ACSR Conductor Plain Terrian km 51.5214 51.521

LE6 3.Panther conductor Plain Terrian 166.361 35.584 58.3422 260.287

LE7 3. 7/3.15 mm GI Ground wire Plain Terrian for 110kV line km 27.7276 5.9306 19.4474 8.5869 61.693

LE8 Assembling and Erection of 220kV Transmission Line Towers (HT & MS) (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications. i) 220kV Line Towers : Note: 1.The Bidders are required to quote the rates taking into consideration of the charges for sorting of towers, loading, unloading, stub setting, aligning, dismantling & transportation of templates from one location to another and tack welding etc., 2. For split up details refer techno commercial sheet (Line supply). 3. The rates quoted shall be on tonne basis. t 744.9470 744.947

LE10 Assembling and Erection of 110kV Transmission Line Towers (HT & MS) (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications. i) 220kV Line Towers : Note: 1.The Bidders are required to quote the rates taking into consideration of the charges for sorting of towers, loading, unloading, stub setting, aligning, dismantling & transportation of templates from one location to another and tack welding etc., 2. For split up details refer techno commercial sheet (Line supply). 3. The rates quoted shall be on tonne basis.l sheet (Line supply). 3. The rates quoted shall be on tonne basis. t 408.5265 110.1292 310.9673 151.1026 980.726

LE9 Erection of design based galvanised Steel Pole Structure of 220kV DC Monopole 2P3+3M (including Cross arm, base plate with anchor bolts, anticlimbing device, step bolts and bolt & nuts, ladder and all other equipment complete as per technical specification). ( To be designed for the Subject Work) i) 220 kV - Monopole type 2P3+3M(30° to 60°/ DE(0°-15°) (Note: Bidder Should indicate the weight of monopole, which is inclusive of normal Body, Body Extn and Bolt & nuts, etc) t 0.0000 0.0000

LE11 iii) Total weight of galvanised Bolts and Nuts for 220kV Towers Note:Rate to be quoted on per tonne Basis t 35.9370 35.9370

LE12 iv) Total weight of galvanised Bolts and Nuts for 110kV Towers Note:Rate to be quoted on per tonne Basis t 18.7739 4.9868 14.0983 6.8496 44.7086

LE14 3) Setting up of stub templates & aligning dismantling & transportation of templates from one location to another location i) For 220kV line No 125 125.000

LE15 ii) For 110kV line No 107 26 77 37 247.000

LE16 4) Tower accessories : a) Number Plates(1 No. per tower) No 125 107 26 77 37 372.000

LE17 b) Danger Boards (1 No. per tower) No 125 107 26 77 37 372.000

LE18 c) Circuit plate (1 No. per circuit) No 250 214.0000 52 77 74 667.000

LE19 d) Phase plate (Set of 6No.) for 220kV Set 125 125.000

LE20 e) Phase plate (Set of 3 No.) for 110kV Set 214 52 77 74 417.000

LE21 5) Supplying and fixing AC devices: i) Supplying and fixing GI angle iron 45 x 45x5mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer surface of tower to facilitate running of barbed wire AC device. Set 125 107 26 77 37 372.000

LE22 ii) Supplying and fixing Barbed wire as per specifications. Rmtr 28825.00 14851.00 3908 11172 5482 64238.000

LE23 iii) Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation charges. Set 125 107 26 77 37 372.000

LE24 OPGW cable & accessories: 1) Installation, testing & commissioning of 24F/48F OPGW cable along with associated hardware fittings as per technical pecification for OFFLINE condition km 30.47 30.470

LE25 2)Joint box for 48 fibre OPGW Nos 13.00 13.000

LE26 3) FODP 48 F: Indoor type rack mounted with FCPC coupling & pigtails to house LIU). Nos 1.000 1.000

LE27 4) Fibre Optic Approach cable: 48 fibre(DWSM)-including installation hardware set for 48 fibre approach cable km 0.500 0.500

NOTE: 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, KPTCL,9th Floor, Indhana Bhavana, Bangalore.

2. The Erection charges shall include transportaion to site, loading and unloading.

3. Bidders shall start the line work from both the ends simultaneously by deploying more number of gangs as the ‘ROW’ issues which may crop-up can be addressed in parallel on both segments. The bidders shall take note of the same before quoting.

4. The charges for erection shall be quoted in the Percentage rate finanacial bid.

5. Released materials shall be transported to the nearest KPTCL Projects Division Stores without any additional cost as per the directions of the Engineer in charge of the work.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3B(iii) - Price Breakup for -Line Design portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavana, A.R Circle, Bangalore - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

LINE ERECTION PORTION INCLUDING DISMANTLING:

Sl.No Name of the Equipment/Mataerials Unit Total Quantity to be Designed

LD1 Design, developing Structural drawings, foundation drawings (for all types of soils), Shop drawings, as per technical specification including foundation design for 220kV DC Monopole type 2P3+3M type tower (30° to 60°/ DE(0°-15°) type Normal, +3 Mtr Extensions Ls 1.000

LD2 Proto assembly inspection and proto type testing (Non Destructive) of following of Monopoles i)220kV DC Monopole type 2P3+3M type tower (30° to 60°/ DE(0°-15°) type Normal, +3 Mtr Extensions Note: Weight indicated here is indicative,Payment for type testing for 2P3+3M type tower (30° to 60°/ DE(0°-15°) shall be made for the actual weight as per approved drawing/BOM or ceiling weights quoted by the bidder whichever is less and as per Cl.No.8.10 of SCC t 17.69

NOTE: 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavana, Bangalore.

2. The Erection charges shall include transportaion to site, loading and unloading.

3. Bidders shall start the line work from both the ends simultaneously by deploying more number of gangs as the ‘ROW’ issues which may crop-up can be addressed in parallel on both segments. The bidders shall take note of the same before quoting.

4. The charges for erection shall be quoted in the Percentage rate finanacial bid.

5. Released materials shall be transported to the nearest KPTCL Projects Division Stores without any additional cost as per the directions of the Engineer in charge of the work.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

CIVIL SUB-STATION TECHO-COMMERCIAL SHEETS

a) Establishing 2x160MVA, 220/110kV and 1x10MVA, 110/11kV sub-station at Chadachan (Devarnimbaragi) with KIOSK Based arrangments in Chadachan Taluk Vijayapura District. b) Construction of 2nos of 220kV Terminal Bays at the existing 220/110kV Indi Sub-station for terminating 220kV DC line from the proposed 220kV Chanachan Sub-station in Indi Taluk, Vijayapura District c) Construction of 2nos of 110kV Terminal Bays at the existing 110/11kV Dhulakhed Sub-station for terminating 110kV DC line from the proposed 220kV Chanachan Sub-station in Indi Taluk, Vijayapura District d) Construction of 2nos of 110kV Terminal Bays at the existing 110 kV Jigajevanagi Sub-station for terminating 110kV DC line from the proposed 220kV Chanachan Sub-station in Indi Taluk, Vijayapura District e) Construction of 1 no of 110kV Terminal Bay at the existing 110 kV Kerur Sub-station for terminating 110kV SC line from the proposed 220kV Chanachan Sub-station in Indi Taluk, Vijayapura District

BIDDERS SHALL NOTE: FILL ONLY IN LIGHT BLUE COLOURED CELLS

Bidders Name and Address along with GSTIN No.: To

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, A.R.Circle, BANGALORE - 560009.

Sl. No. Specifications Unit Quantity Total Quantity (a+b+c+d+e)

a) 220kV S/s at Chadachan (Devarnimbaragi) b) 2nos. of 220kV TB's at Indi S/s c) 2nos. of 110kV TB's at Dhulakhed S/s d) 2nos. of 110kV TB's at Jigajevanagi S/s e) 1no. of 110kV TB at Kerur S/s

B1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m cum 13278.04 1821.07 239.45 73.50 73.50 15485.56

B2 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. In all kinds of soils Depth upto 1.5m cum 5498 313.00 0.00 0 0 5811.00

B3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth cum 2212.48 440.47 0.00 0 0 2652.95

B4 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock Depth exceeding 1.5 m, but not exceeding 3 m cum 1236.57 76.70 21.78 165.33 67.72 1568.10

B5 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work In Hard Rock ( requiring blasting) Depth upto 1.50m cum 1000 0 0.00 0 0 1000.00

B6 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. In Hard Rock ( requiring blasting) Depth exceeding 1.5 m, but not exceeding 3 m cum 800 0.00 0.00 0.00 0.00 800.00

B7 Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be recovered @ Rs. 60.00/m3) cum 4065.3 1434.72 0.00 0 0 5500.02

B8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling, water,all materials,usage& all other appurtenaces required to complete the work. cum 57080.37 199.51 0.00 0 0 57279.88

B9 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications cum 1581.6 0.00 146.54 144.82 64.05 1937.01

B10 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m cum 107.26 0.00 0.00 0.00 0.00 107.26

B11 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates cum 4318.04 299.53 14.50 13.30 7.35 4652.72

B12 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - For foundation (3% cosidered for Form work) cum 6917.86 100.65 71.16 65.52 36.40 7191.59

B13 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- For Columns pedestal & coluimn upto plinth beam Ground Floor (70% considered for Form work) cum 19.84 0.00 0.00 0.00 0.00 19.84

B14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- For Columns (70% considered for Form work) Ground Floor cum 56.37 0.00 0.00 0.00 0.00 56.37

B15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- For Columns (70% considered for Form work) First Floor cum 10.00 0.00 0.00 0.00 0.00 10.00

B16 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - For Plinth Beam (50% considered for Form work) cum 120.18 0 0.00 0 0 120.18

B17 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- (10% considered for Form work) cum 1476.47 6.12 0.00 0.00 0.00 1482.59

B18 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20mm nominal size graded crushed coarse aggregate- ( 35% considered for Form work) cum 493.05 20.58 0.00 0.00 0.00 513.63

B19 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Ground Floor (60% considered for Form work) cum 36.43 0.00 0.00 0.00 0.00 36.43

B20 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. First Floor (60% considered for Form work) cum 10.00 0.00 0.00 0.00 0.00 10.00

B21 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Chejjas & Canopy of CRB (45% considered for Form work) cum 11.00 0.00 0.00 0.00 0.00 11.00

B22 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Roof slab (50% considered for Form work) Ground Floor cum 89.74 0.00 0.00 0.00 0.00 89.74

B23 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates . (50% considered for Form work) Roof slab at First floor cum 22.50 0.00 0.00 0.00 0.00 22.50

B24 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (For coping, sills and floor bed, screed concrete) cum 143.35 50.91 0.00 0.00 0.00 194.26

B25 Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical (power/control cables/instrumentation/communication cables and under-ground and over ground at entry and exit of control room as per directions of engineer incharge of work. no 5.00 0.00 0.00 0.00 0.00 5.00

B26 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings kg 50381.45 0.00 0.00 0.00 0.00 50381.45

B27 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures kg 336524.10 5717.08 6591.85 6591.85 5357.62 360782.50

B28 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 71229.36 1917.21 2190.50 2190.50 2190.50 79718.07

B29 Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. cum 200.00 0.00 0.00 0.00 0.00 200.00

B30 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 14:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 140 kg/ m3 , optimum moisture content to be determined during trial length construction, concrete strength not to be less than 7 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing - For Road cum 103.79 0.00 0.00 0.00 0.00 103.79

B31 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M40 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (5% considered for Form work) cum 155.69 0.00 0.00 0.00 0.00 155.69

B32 Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight m 300.00 0.00 0.00 0.00 0.00 300.00

B33 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding kg 15000.00 0.00 0.00 0.00 0.00 15000.00

B34 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc excluding the cost of CI frame and cover. each 100.00 5.00 2.00 2.00 2.00 111.00

B35 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. each 100.00 4.00 4.00 4.00 4.00 116.00

B36 Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with ppurtenances. complete. Medium Duty Set 200.00 9.00 6.00 6.00 6.00 227.00

B37 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) cum 200.00 0.00 0.00 0.00 0.00 200.00

B38 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in super structure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. cum 304.53 0.00 0.00 0.00 0.00 304.53

B39 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications sqm 1607.00 2.00 0.00 0.00 0.00 1609.00

B40 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement :6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. sqm 4643.77 150.00 0.00 0.00 0.00 4793.77

B41 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. sqm 966.22 0.00 0.00 0.00 0.00 966.22

B42 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. sqm 1667.10 0.00 0.00 0.00 0.00 1667.10

B43 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. sqm 100.00 0.00 0.00 0.00 0.00 100.00

B44 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. sqm 1500.00 0.00 0.00 0.00 0.00 1500.00

B45 Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom, toilet, balcony & utility area applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break greater than 120% as per ASTM D 412, Tensile strength greater than1N/mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. sqm 375.00 0.00 0.00 0.00 0.00 375.00

B46 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 L per 50 kg of cement or as per direction of Engineer incharge. sqm 70.00 0.00 0.00 0.00 0.00 70.00

B47 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. sqm 583.03 0.00 0.00 0.00 0.00 583.03

B48 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. m 80.00 0.00 0.00 0.00 0.00 80.00

B49 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. sqm 2.70 0.00 0.00 0.00 0.00 2.70

B50 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile. sqm 48.00 0.00 0.00 0.00 0.00 48.00

B51 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile sqm 84.00 0.00 0.00 0.00 0.00 84.00

B52 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. sqm 32.22 0.00 0.00 0.00 0.00 32.22

B53 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. sqm 105.24 0.00 0.00 0.00 0.00 105.24

B54 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. sqm 2633.32 0.00 0.00 0.00 0.00 2633.32

B55 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. sqm 2633.32 0.00 0.00 0.00 0.00 2633.32

B56 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. sqm 2633.32 0.00 0.00 0.00 0.00 2633.32

B57 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. sqm 4909.75 120.51 0.00 0.00 0.00 5030.26

B58 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 75mm dia., 6 kg/sqcm & class 3 m 500.00 0.00 0.00 0.00 0.00 500.00

B59 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 1300.00 0.00 0.00 0.00 0.00 1300.00

B60 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 160mm dia., 6 kg/sqcm & class 4 m 1350.00 15.00 0.00 0.00 0.00 1365.00

B61 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 900 mm dia. m 15.00 0.00 0.00 0.00 0.00 15.00

B62 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. sqm 20.00 0.00 0.00 0.00 0.00 20.00

B63 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid each 4.00 0.00 0.00 0.00 0.00 4.00

B64 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps each 5.00 0.00 0.00 0.00 0.00 5.00

B65 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm each 5.00 0.00 0.00 0.00 0.00 5.00

B66 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g each 6.00 0.00 0.00 0.00 0.00 6.00

B67 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank. L 4000.00 0.00 0.00 0.00 0.00 4000.00

B68 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern each 2.00 0.00 0.00 0.00 0.00 2.00

B69 Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy no 5.00 0.00 0.00 0.00 0.00 5.00

B70 Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy no 5.00 0.00 0.00 0.00 0.00 5.00

B71 Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer in-charge of works as per the standard procedure. sqm 33756.00 2380.00 0.00 1500.00 1500.00 39136.00

B72 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). sqm 85.00 0.00 0.00 0.00 0.00 85.00

B73 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) sqm 3.00 0.00 0.00 0.00 0.00 3.00

B74 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge. 42x50 mm PVC Extruded section m 90.00 0.00 0.00 0.00 0.00 90.00

B75 30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (plus or minus 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30mm and 2 mm (plus or minus 0.2 mm), wall thickness. Fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (plus or minus 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in–charge. sqm 65.00 0.00 0.00 0.00 0.00 65.00

B76 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. m 45.00 0.00 0.00 0.00 0.00 45.00

B77 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. sqm 15.00 0.00 0.00 0.00 0.00 15.00

B78 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum moisture resistant board sqm 275.00 0.00 0.00 0.00 0.00 275.00

B79 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) no 30.00 0.00 0.00 0.00 0.00 30.00

B80 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge kg 475.00 0.00 0.00 0.00 0.00 475.00

B81 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia 4 mm) sqm 1041.50 352.50 0.00 0.00 0.00 1394.00

B82 Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire m 4918.50 775.50 0.00 0.00 0.00 5694.00

B83 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest ammendments and instructions of engineer incharge of work. 1.50 HP 1.50 HP/1.1KW 12 STG each 1.00 0.00 0.00 0.00 0.00 1.00

B84 Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm. No 2.00 0.00 0.00 0.00 0.00 2.00

B85 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 50 mm nominal dia Pipes m 300.00 0.00 0.00 0.00 0.00 300.00

B86 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 40mm nominal dia Pipes m 250.00 0.00 0.00 0.00 0.00 250.00

B87 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 25mm nominal dia Pipes m 100.00 0.00 0.00 0.00 0.00 100.00

B88 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 0 to 50 m - Water supply Upto 50.00 mtrs. m 100.00 0.00 0.00 0.00 0.00 100.00

B89 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for:Borewell depth of 50 to 100 m m 100.00 0.00 0.00 0.00 0.00 100.00

B90 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 100 to 150 m m 100.00 0.00 0.00 0.00 0.00 100.00

B91 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 150 to 200 m m 100.00 0.00 0.00 0.00 0.00 100.00

B92 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes,collars and caps etc.) for: Borewell depth of 200 to 250 m m 100.00 0.00 0.00 0.00 0.00 100.00

B93 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty m 200.00 0.00 0.00 0.00 0.00 200.00

B94 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments each 32.00 0.00 0.00 0.00 0.00 32.00

B95 Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge each 2.00 0.00 0.00 0.00 0.00 2.00

B96 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. each 2.00 0.00 0.00 0.00 0.00 2.00

B97 PUMPSET : Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. 6.50 HP - 90 LPM @ 132 m = 15 STG Outlet Dia - 2.00" each 2.00 0.00 0.00 0.00 0.00 2.00

B98 SUBMERSIBLE CABLE Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 m2 m 500.00 0.00 0.00 0.00 0.00 500.00

B99 PRESSURE GAUGE : Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm each 2.00 0.00 0.00 0.00 0.00 2.00

B100 GATE VALVE : Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm each 2.00 0.00 0.00 0.00 0.00 2.00

B101 NON - RETURN VALVE : Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm each 2.00 0.00 0.00 0.00 0.00 2.00

B102 ix) Control Panel BOARD-A: Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLDirect Online Starter 2)S-D- Star Delta Starter for outdoor 6 -15 HP pumps each 2.00 0.00 0.00 0.00 0.00 2.00

B103 POWER CAPACITOR: Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. kVAR 2.00 0.00 0.00 0.00 0.00 2.00

B104 MCB: Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. per 3 poles 2.00 0.00 0.00 0.00 0.00 2.00

B105 GALVANISED MILD STEEL TUBES: Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) 50 mm each 40.00 0.00 0.00 0.00 0.00 40.00

B106 Erection elctrification & Commissioning works of pumpsets : Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work Job 2.00 0.00 0.00 0.00 0.00 2.00

B107 Erection of panel board & meter board Unit : Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work. Job 2.00 0.00 0.00 0.00 0.00 2.00

B108 Main connections: Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. m 50.00 0.00 0.00 0.00 0.00 50.00

B109 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick m 390.00 0.00 0.00 0.00 0.00 390.00

B110 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick m 776.00 0.00 0.00 0.00 0.00 776.00

B111 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19/20mm dia 2mm thick m 238.00 0.00 0.00 0.00 0.00 238.00

B112 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25mm dia 2mm thick m 188.00 0.00 0.00 0.00 0.00 188.00

B113 Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm each 6.00 0.00 0.00 0.00 0.00 6.00

B114 Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm each 5.00 0.00 0.00 0.00 0.00 5.00

B115 Supplying PVC flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated complete. 25 mm m 85.00 0.00 0.00 0.00 0.00 85.00

B116 Supplying And Fixing Metal Fan Box with Round Hook. no 18.00 0.00 0.00 0.00 0.00 18.00

B117 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point up to 3Mtr from tapping point to out let via switch box point 28.00 0.00 0.00 0.00 0.00 28.00

B118 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box point 65.00 0.00 0.00 0.00 0.00 65.00

B119 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.( 4/9) - II. Point wiring using class B Materialsc) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box point 40.00 0.00 0.00 0.00 0.00 40.00

B120 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 1.5 sqmm m 580.00 0.00 0.00 0.00 0.00 580.00

B121 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 2.5 sqmm m 630.00 0.00 0.00 0.00 0.00 630.00

B122 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 4 sqmm m 765.00 0.00 0.00 0.00 0.00 765.00

B123 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 6 sqmm m 340.00 0.00 0.00 0.00 0.00 340.00

B124 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way each 30.00 0.00 0.00 0.00 0.00 30.00

B125 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way each 6.00 0.00 0.00 0.00 0.00 6.00

B126 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way each 8.00 0.00 0.00 0.00 0.00 8.00

B127 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way each 18.00 0.00 0.00 0.00 0.00 18.00

B128 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16Way each 12.00 0.00 0.00 0.00 0.00 12.00

B129 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 1 to 2 Module each 30.00 0.00 0.00 0.00 0.00 30.00

B130 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 4 Module each 6.00 0.00 0.00 0.00 0.00 6.00

B131 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 6 Module each 6.00 0.00 0.00 0.00 0.00 6.00

B132 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 8 Module each 8.00 0.00 0.00 0.00 0.00 8.00

B133 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 10-12 Module each 18.00 0.00 0.00 0.00 0.00 18.00

B134 Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers. 100 A each 6.00 0.00 0.00 0.00 0.00 6.00

B135 Supplying of on load change over switches 4 poles,AC-23A Duty,415V,50Hz,AC Supply. With all accessories. (SMEnclosure Sheet Metal Execution) 100 A each 2.00 0.00 0.00 0.00 0.00 2.00

B136 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism 100 A 25 kA Each 2.00 0.00 0.00 0.00 0.00 2.00

B137 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box-16 Module each 12.00 0.00 0.00 0.00 0.00 12.00

B138 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 195.00 0.00 0.00 0.00 0.00 195.00

B139 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch Each 2.00 0.00 0.00 0.00 0.00 2.00

B140 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Each 62.00 0.00 0.00 0.00 0.00 62.00

B141 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 18.00 0.00 0.00 0.00 0.00 18.00

B142 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Each 4.00 0.00 0.00 0.00 0.00 4.00

B143 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push Each 2.00 0.00 0.00 0.00 0.00 2.00

B144 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch Each 10.00 0.00 0.00 0.00 0.00 10.00

B145 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 14.00 0.00 0.00 0.00 0.00 14.00

B146 Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. sq cm 1200.00 0.00 0.00 0.00 0.00 1200.00

B147 Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws 80/90 mm no 32.00 0.00 0.00 0.00 0.00 32.00

B148 Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws 110mm no 44.00 0.00 0.00 0.00 0.00 44.00

B149 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder. Nos 12.00 0.00 0.00 0.00 0.00 12.00

B150 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32A SP Each 20.00 0.00 0.00 0.00 0.00 20.00

B151 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63A SP Each 18.00 0.00 0.00 0.00 0.00 18.00

B152 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A TPN Each 2.00 0.00 0.00 0.00 0.00 2.00

B153 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 A TPN Nos 6.00 0.00 0.00 0.00 0.00 6.00

B154 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting etc., Made out of 14 SWG MS enclosur - Double Door 12Way SP &N Each 6.00 0.00 0.00 0.00 0.00 6.00

B155 Supplying, fixing andwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole Each 12.00 0.00 0.00 0.00 0.00 12.00

B156 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole Each 1.00 0.00 0.00 0.00 0.00 1.00

B157 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage current, programmable delay/auto/manual reset facility suitable to mounton DIN rail/ flush mounting on panel board. Each 1.00 0.00 0.00 0.00 0.00 1.00

B158 Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT Each 3.00 0.00 0.00 0.00 0.00 3.00

B159 Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter each 2.00 0.00 0.00 0.00 0.00 2.00

B160 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase 4wire whole current class-1 Accuracy Energy Meter. each 1.00 0.00 0.00 0.00 0.00 1.00

B161 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. each 3.00 0.00 0.00 0.00 0.00 3.00

B162 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm m 12.00 0.00 0.00 0.00 0.00 12.00

B163 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x50 x 6 mm m 8.00 0.00 0.00 0.00 0.00 8.00

B164 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete - 16SWG sq cm 85000.00 0.00 0.00 0.00 0.00 85000.00

B165 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply each 5.00 0.00 0.00 0.00 0.00 5.00

B166 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm) each 2.00 0.00 0.00 0.00 0.00 2.00

B167 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system 48" Sweep (1200mm) Regular model each 18.00 0.00 0.00 0.00 0.00 18.00

B168 Supplying wall mounting fan suitable to operate at single-phase 230v AC supply. 400 mm Sweep each 10.00 0.00 0.00 0.00 0.00 10.00

B169 Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. 5 star 2 Ton capacity Each 10.00 0.00 0.00 0.00 0.00 10.00

B170 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. each 10.00 0.00 0.00 0.00 0.00 10.00

B171 Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube Split m 30.00 0.00 0.00 0.00 0.00 30.00

B172 Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. 5kVA Capacity each 10.00 0.00 0.00 0.00 0.00 10.00

B173 Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries. each 10.00 0.00 0.00 0.00 0.00 10.00

B174 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition each 58.00 0.00 0.00 0.00 0.00 58.00

B175 Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 100 lumen per W, 120degree beam spread, life greater than 25000 burning hours and Compliance to IS10322/ IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 1'x1' 18W each 15.00 0.00 0.00 0.00 0.00 15.00

B176 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition each 30.00 0.00 0.00 0.00 0.00 30.00

B177 Supply of round/square recess/surface mounted rolling type LED Down light withLED square or round down light 5-6W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @50/60Hz & Power factor greater than 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition each 30.00 0.00 0.00 0.00 0.00 30.00

B178 Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. Using 25mm dia G.I.Pipe each 11.00 0.00 0.00 0.00 0.00 11.00

B179 Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders. each 90.00 0.00 0.00 0.00 0.00 90.00

B180 Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. each 30.00 0.00 0.00 0.00 0.00 30.00

B181 Extra length of GI pipe of class B 19mm dia for down rod. m 30.00 0.00 0.00 0.00 0.00 30.00

B182 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame each 7.00 0.00 0.00 0.00 0.00 7.00

B183 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 10.00 0.00 0.00 0.00 0.00 10.00

B184 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. no 4.00 0.00 0.00 0.00 0.00 4.00

B185 GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm copper plate each 11.00 0.00 0.00 0.00 0.00 11.00

B186 GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3 mm Copper strip m 45.00 0.00 0.00 0.00 0.00 45.00

1) The uploaded Soil investigation report for the proposed 220/110/11kV sub-station land is indicative and is to be referred for guidance purpose only. However all foundations shall be designed to suit the site soil condition and as per the approved layout.

2) The uploaded drawings are indicative and are to be referred for guidance purpose only. However all foundations shall be designed to suit the site soil condition and as per the approved layout.

3) The land will be handed over " As is where is condition".

Place Designation

Name of the company

Karnataka Power Transmission Corporation Limited

CIVIL TECHO-COMMERCIAL SHEETS (Civil- Transmission Line - other than Design based portion of work)

a) Construction of 220kV DC line on DC towers from existing 220kV Indi Sub-station to proposed 220kV Chadachan (Devaranimbaragi) Sub-station for a distance of 29.628km using AAAC Moose ACSR in Indi Taluk, Vijayapura District. b) Construction of 110kV DC line on DC tower from proposed 220kV Chadachan (Devarnimbaragi) Sub-station to 110kV Dhulkhed Sub-station for a distance of 27.317km using Panther conductor in Indi Taluk, Vijayapura District. c) Construction of 110kV DC line on DC tower from proposed 220kV Chadachan (Devarnimbaragi) Sub-station to 110kV Jigajevanagi Sub-station for a distance of 5.843km using Panther conductor in Indi Taluk, Vijayapura District. d) Construction of 110kV SC line on DC tower from proposed 220kV Chadachan (Devarnimbaragi) Sub-station to 110kV Kerur Sub-station for a distance of 19.16km using Panther conductor in Indi Taluk, Vijayapura District. e) Construction of 110kV LILO line from existing 110kV Zalki-Chadachan line to proposed 220kV Chadachan (Devaranimbaragi) Sub-station using Lynx conductor for a distance of 8.460km in Indi Taluk, Vijayapura District.

BIDDERS SHALL NOTE: FILL ONLY IN LIGHT BLUE COLOURED CELLS

Bidders Name and Address along with GSTIN No.: To

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavan, A.R.Circle, BANGALORE - 560009.

Sl. No. Specifications Unit a) 220kV DC line (portion of 29.628kms)KPTCL Existing Design b)110kV DC line (27.317kms) c)110kV DC line (5.843kms) d)110kV SC line (19.16kms) e) 110kV LILO line (8.460kms) Total Qty (a+b+c+d+e)

C1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 1927.39 1386.8 111.09 1265.6 713.77 5404.65

C2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils upto 3.0 m depth with 5% de-watering is assessed as per site condition Cum 6279.11 12481 999.88 11390.7 6423.91 37574.60

C3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth. Cum 357.61 168.22 154.21 88.82 41.11 809.97

C4 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting Depth exceeding 1.5 m but not exceeding 3 m depth Cum 357.61 168.22 154.21 88.82 41.11 809.97

C5 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting Depth upto 1.5 m with 5% de-watering is assessed as per site condition Cum 1879.10 84.11 154.21 88.82 41.11 2247.35

C6 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting Depth exceeding 1.5 m but not exceeding 3 m depth with 7.5 % de-watering is assessed as per site condition Cum 1879.10 84.11 77.10 88.82 41.11 2170.24

C7 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. In Hard Rock (requiring blasting) Depth upto 1.50m Cum 357.61 168.22 115.65 44.41 41.11 727.00

C8 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. In Hard Rock (requiring blasting) Depth exceeding 1.5 m, but not exceeding 3 m Cum 357.61 168.22 115.65 44.41 0.00 685.89

C9 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 214.55 218.57 33.10 190.00 107.67 763.89

C10 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation Cum 1335.72 1414.03 236.15 1212.00 687.83 4885.73

C11 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures Kg 77289.29 78679.00 12961.00 65141.00 41967.00 276037.29

C12 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 11844.88 13076.21 1612.76 11698.54 6547.73 44780.12

The Design shall be safe against all anticipated/possible forces and pressures. All necessary checks for the stability of the structure shall be carried out.

Place Designation

Name of the company

Karnataka Power Transmission Corporation Limited

CIVIL TECHO-COMMERCIAL SHEETS (Civil- Transmission Line Design based Monopoles)

a) Portion of Construction of 220kV DC line on DC towers from existing 220kV Indi Sub-station to proposed 220kV Chadachan (Devaranimbaragi) Sub-station for a distance of 29.628km using AAAC Moose ACSR in Indi Taluk, Vijayapura District (Design Based)

BIDDERS SHALL NOTE: FILL ONLY IN LIGHT BLUE COLOURED CELLS

Bidders Name and Address along with GSTIN No.:

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, 9th Floor, A.R.Circle, BENGALURU - 560009.

FOR DESIGN BASED Monopoles(Civil Line portion)

Sl. No. Specification Unit a) Portion of 220kV DC line (29.628kms) Quantity Line(a) (For Design based Monopoles)

Ceiling Volume per Monopole to be quoted by the bidder

No. of Monopoles Unit volume/ceiling quantity per Monopoles Total volume/ceiling Quantity

Bidders to indicate the ceiling volumes of excavation for the following:

1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.

i) In all kinds of soils (NDS)

220kV DC Monopole 2P3+3M cum

ii) In all kinds of soils with de-watering is assessed as per site condition (WBC)

220kV DC Monopole 2P3+3M cum 3 0.00

iii) In ordinary/soft rock without blasting (DFR)

220kV DC Monopole 2P3+3M cum

iv) In Hard Rock (requiring blasting)

220kV DC Monopole 2P3+3M cum

v) In ordinary/soft rock without blasting with dewatering assessed (SFR/WFR)

220kV DC Monopole 2P3+3M cum

vi) In all kind of soils with dewatering assessed (WS/PS/FS)

220kV DC Monopole 2P3+3M cum

vii) In Hard Rock (blasting prohibited)

220kV DC Monopole 2P3+3M cum

Total Excavation quantities. cum 0.00

Volume of Towers to be designed by the bidder NOTE : The Total excavation quantities is further split / bifurcated into different soil classifications to facilitate measurements as per actual strata encountered and payment for the same.

C1 In all kinds of soils depth upto 3m cum 0.00

C2 In all kinds of soils depth upto 3m with 5% dewatering is accessed as per site condition cum 0.00

C3 In ordinary/soft rock without blasting upto 1.5m depth cum 0.00

C4 In ordinary/soft rock without blasting depth exceeding 1.5m but not exceeding 3m cum 0.00

C5 In ordinary/soft rock without blasting Depth upto 1.5 m with 5% de-watering is assessed as per site condition cum 0.00

C6 In ordinary/soft rock without blasting Depth exceeding 1.5 m but not exceeding 3 m depth with 7.5 % de-watering is assessed as per site condition cum 0.00

C11 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation (8% considered for form work)

i) In all kinds of soils (NDS)

220kV DC Monopole 2P3+3M

ii) In all kinds of soils with de-watering is assessed as per site condition (WBC)

220kV DC Monopole 2P3+3M cum 3 0.00

iii) In ordinary/soft rock without blasting (DFR)

220kV DC Monopole 2P3+3M cum

iv) In Hard Rock (requiring blasting)

220kV DC Monopole 2P3+3M cum

v) In ordinary/soft rock without blasting with dewatering assessed (SFR/WFR)

220kV DC Monopole 2P3+3M cum

vi) In all kind of soils with dewatering assessed (WS/PS/FS)

220kV DC Monopole 2P3+3M cum

vii) In Hard Rock (blasting prohibited)

220kV DC Monopole 2P3+3M cum

Total quatity of RCC M 25 Grade concrete cum 0.00

C12 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures

i) In all kinds of soils (NDS)

220kV DC Monopole 2P3+3M kg

ii) In all kinds of soils with de-watering is assessed as per site condition (WBC)

220kV DC Monopole 2P3+3M kg 3 0.00

iii) In ordinary/soft rock without blasting (DFR)

220kV DC Monopole 2P3+3M kg

iv) In Hard Rock (requiring blasting)

220kV DC Monopole 2P3+3M kg

v) In ordinary/soft rock without blasting with dewatering assessed (SFR/WFR)

220kV DC Monopole 2P3+3M kg

vi) In all kind of soils with dewatering assessed (WS/PS/FS)

220kV DC Monopole 2P3+3M kg

vii) In Hard Rock (blasting prohibited)

220kV DC Monopole 2P3+3M kg

Total Quantity of Steel Reinforcement kg 0.00

1.Bidders are instructed to visit the work locations and Soil investigation if required shall be carried out and design shall be based on the test report.

2. The 220kV DC Monopoles 2P3+3M mentioned above are DESIGN BASED. As such the successful bidder shall submit all the designs and drawings for approval and all the works shall be carried out after approval of the drawings by the owner.

3. For design based Monopoles ceiling volumes for all foundations components with respect to soil classification for (1) All kind of soils (NDS), (2) All kind of soils with dewatering is assessed (WBC), (3) In ordinary rock/soft rock without blasting (DFR), (4) Hard rock (requiring blasting), (5) In ordinary rock/soft rock without blasting with dewatering assessed(SFR/WFR), (6) In All kind of soils with dewatering is assed (WS/FS/PS) & (7) Hard Rock(Blasting Prohibited) are considered. The Bidder has to quote the ceiling foundation volumes for all foundation components mentioned above for design based Monopole towers accordingly.

4. The ceiling design volume to be quoted by the bidder for Monopole towers with their respective soil classifications in the "Financial offer" of KPP portal should match with the YELLOW coloured cell highlighted in this techno commercial sheet - Schedule 3C(ii)(b) civil line Design (for design based monopole foundation components), arrived based on the breakup volumes of monopole tower.

5. In ‘Item-wise Financial offer’ in KPP Portal, the Bidder shall quote their design based Monopoles Ceiling foundation volumes under ‘Bidder Quantity’ within the stipulated Minimum and Maximum Quantity without fail.

6. In case of any discrepancies noticed between total ceiling foundation volumes of Monopole towers indicated in ‘Itemwise Financial offer’ and Techno-commercial sheet Schedule 3C(ii) cvl line Design, the total foundation volumes of towers quoted in KPP Portal shall be considered for finalization of respective volumes of design based Monopole towers.

NOTE : The Total excavation quantity is further split / bifurcated into different soil classifications to facilitate measurements as per actual strata encountered and payment for the same as per the tender conditions.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-5 COMMERCIAL DEVIATION

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Please fill Only in the Light Blue Couloured Cell.

Please key in the SlNo.,Section , Clause , Description as given in bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening. Please refer Vendor Manual attached for further details.

For any further assistance for submitting your bids please call up KPTCL Office.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

I/we have read each of the Clauses mentioned in INVITATION FOR TENDERS , INSTRUCTION TO TENDERERS , CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS and all the sections of Bid documents.

The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents for

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

These deviations and variations are exhaustive. Except these deviations, the entire work shall be performed as per your specifications and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-6 : TECHNICAL DEVIATION

SHEET FOR TECHNO-COMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Please key in the SlNo., Section , Clause , Description as given in Bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents for

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

These deviations and variations are exhaustive.Except these deiviations and variations, the entire work shall be performed as per your specification and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 7(List of special tools and tackles )

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

List of special tools and tackles the price of which is included in bid price.

Sl. No. For equipment Description of item Unit Quantity

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: 1 ) SHALL BE UPLOADED WITHOUT PRICES

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Kaveri Bhavan, BANGALORE - 560009

We have uploaded with our proposal the following additional information.

Sl. No. Brief Description of information Ref. and Page No.

Place Designation

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (1 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL, KAVERI BHAVAN, Bangalore - 560 009

a) * We have submitted bid as individual Bidder. (Key in Individual Bidder )

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium )

Name of Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

1.0 GENERAL INFORMATION

The Bidder, bidding for this package are requested to complete the information in the following form.

Sl. No. Particulars Bidder Details

1 Name of the Firm

2 Address of Head Office / Registered Office GST no.

5 Name of Contact person with Designation

6 Place of Incorporation/Registration

7 Year of Incorporation/Registration

8 Constitution or legal status of Tenderer [Upload copy]

9 Place of Registration [Upload copy]

10 Principal place of business

2.0 We are furnishing the following details/documents in support of Qualifying requirement for above mentioned project

Sl.No. Particulars For individual Bidder In case of Consortium :

Lead Bidder Consortium partner

(a) Written power of attorney of the signatory on the bid to commit the bidder.

1 Uploaded / Not

(b) Certificate of Registration of the Company. Please mention the date of incorporation of the company

1 Uploaded / Not

(c ) Valid Super Grade Electrical Contractor’s License issued by the Government of Karnataka OR valid Form J-1 Verification Letter issued by Chief Electrical Inspectorate, Govt. of Karnataka to Other State Electrical Contractor License Holder for the highest system voltage specified in the tendered work as on the date of techno commercial Bid submission. Please mention the date of expiry of the License certificate issued by GOK/ Undertaking to this effect

1 Uploaded / Not

(d) Self declaration regarding Litigation w.r.t KPTCL contracts over the last five years (refer IFT)

1 Uploaded / Not

(e) Self declaration for ‘not being disqualified regarding non-performance in any of the Government utilities in the past five years’. (refer IFT)

1 Uploaded / Not

(f) An undertaking to source the supply of equipment/ material from KPTCL approved vendors only as per QR for Vendor registration, available in the KPTCL website ie., kptcl.karnataka.gov.in, Link Tendering & Procurement-Application for Vendor.

1 Uploaded / Not

(g) Self declaration regarding no action against the bidder have been taken by KPTCL in respect of Risk & Cost clause

1 Uploaded / Not

(h) Self declaration regarding 'Eligibility clauses in respect of restrictions on procurement from a bidder of a country which shares a land border with India as per Annexure-XVI

1 Uploaded / Not

(i) Self declaration regarding RESTRICTIONS ON SOURCING OF EQUIPMENTS/MATERIALS BY THE BIDDER FROM A VENDOR OF A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA as per Annexure -XVII

1 Uploaded / Not

Section 3 : 1.3 Work performed of similar nature in the last Ten years of both Lead Bidder & Consortium partner (in case of Consortium) as per Clause No: 3.2 (b) (i) & (ii) of ITT

Project Name Name & Address of the Employer Description of Work Voltage class Number of Sub-Stations/TBs/Length of the Line Contract Number Value of contract Rs. Lakh Date of issue of work order Specified period of completion Actual date of commissioning Remarks explaining reasons for delay in commisioning of work

Name of Consortium Partner

Note : 1 . The documentary proof of fulfilling the qualifying requirements shall be uploaded along with the bid. (i) The bidder shall upload the P.O,LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer along with the bid. (ii) The work experience of Bidders who have executed DCW works/ Self execution works under the supervision of KPTCL officers and the works executed for BMRCL/ KIADB/ BDA/KBJNL/IPP works/other Government or Public sector organizations will also be considered subject to fulfilling the stipulated qualifying requirements and uploading necessary documentary evidence

2. The qualifying experience of the Bidder and Consortium Partner(in case of Consortium) who is having qualifying experience shall be furnished in the above performa and Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

3. IF this sheet is insufficient for furnishing the qualifying experience of the Bidder then similar sheets shall be seperately uploaded.

4. In case of work executed under a contract that had been awarded on a joint venture, the experience of individual joint venture partner shall be considered limited to the scope of that partner under the said contract. The copy of the agreement executed with awarding agency shall be uploaded as proof of the same

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (2 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL, KAVERI BHAVAN, Bangalore - 560 009

Section 3 : 1.5 Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender of a Bidder

(A) Existing commitments and on-going works:

Description of work Place & State Contract No & Date Name and Address of Employer Value of contract (Rs. Lakh) Stipulated period of cof Completion Value of works remaining to be completed ( Rs.Lakhs) (Attach Certificates from Engineers –in- Charge) Anticipated date of commissioning

Ex-Works GST Total (Ex-works + GST)

Name of the Lead Bidder

Name of the Consortium Partner

Note:Attach Certificates from Engineers –in- Charge

B)Works for which Tenders already submitted

Description of work Place & State Name and Address of Employer Estimated value of works (Rs. Lakh) Stipulated period of Completion Date when decision is expected Remarks if any

Ex-Works GST Total (Ex-works + GST)

Name of the Lead Bidder

Name of the Consortium Partner

i) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. OR The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be verified and certified by Chartered Accountant/ Cost Auditor. However, the Bidder has to upload the PO/Work Award copies for existing commitments and on-going works

ii) A self-declaration is to be uploaded by the Lead Bidder & Consortium partner (in case of Consortium) stating that "the information with regard to assessed available tender capacity (Works on Hand) furnished are correct

iii. Bidders shall furnish Certificate from Chartered Accountants for split details of Ex-works values and GST of Contract values of the works in the prescribed format as at Clause No. 1.5 of Section-3: Qualification Information by the Lead Bidder & Consortium partner (in case of Consortium)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (3 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL, KAVERI BHAVAN, Bangalore - 560 009

Following is the list of major supplied Substation equipments/accessories which are type tested and designed, manufactured by us in accordance with internationally recognised standards.

Sl. No. Item rating, type and Designation Qty Customer Date of Order Date of Supply Date of Commissioning Ref. of Cusomer's certificate of successful operation enclosed Ref. of layout & Customer's certificae for successful commission

Note: Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (4 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidder's Name & Address alongwith GSTIN no. : To

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Kaveri Bhavan, Bangalore - 560 009

Section 3 : 1.7 Reports on the financial standing of the tenderer(Lead bidder & Consortium partner (in case of Consortium)) ,such as Profit and Loss Statements and Auditor’s reports in the preceeding last five years, Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates duly certified by chartered Accountant as documentary evidence shall be uploaded.

SLNo. Particulars Year Lead Bidder Consortium Member

Mention Year Turnover excluding GST (in Rs.) GST Amount (in Rs.) Mention Year Turnover excluding GST (in Rs.) GST Amount (in Rs.)

Names of the constituent Firm

1 Annual turn over for the last Five years Year(1) 2020-21 2020-21

2 Liquid Assets / Credit availability or access to evidence of assets

3 Whether Audited Balance sheets and Profit & Loss statement are enclosed for the last Five Years ? (yes/No)

4 Whether Bankers certificate enclosed for credit facilities? (Yes/No)

Note: Bidders shall furnish Certificate from Chartered Accountants for split details of financial Turnover and GST in the prescribed format (Annexure-XX) of tender document.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 9 (5 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL, KAVERI BHAVAN, Bangalore - 560 009

The information to be filled in by the Tenderer hereunder will be used for purposes of computing Tender capacity as provided for in Clause 3 of the Instructions to Tenderers. This information will not be incorporated in the Contract.

Lead Bidder Consortium partner Attach Copy

1.1 Constitution or legal status of Tenderer [Upload copy]

Place of Registration [Upload copy]

Principal place of business

Section - 3: 1.2 Total value of works executed (KPTCL & Non KPTCL works) and payments received in the last five years (in Rs. Lakhs) of both Lead Bidder & Consortium partner (in case of Consortium).

1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last five years (in Rs. Lakhs) of both Lead Bidder & Consortium partner (in case of Consortium). Financial Year KPTCL works Non KPTCL works

Individual Bidder In case of Consortium Individual Bidder In case of Consortium

Total value of works in Rs. Lakh Lead Bidder Consortium Partner Total value of works in Rs. Lakh Lead Bidder Consortium Partner

Total value of works in Rs. Lakh Total value of works in Rs. Lakh Total value of works in Rs. Lakh Total value of works in Rs. Lakh

Note: Attach relevant Certificate/s from Chartered Accountant.

Section 3: 1.9 Name, address, telephone number & e-mail id of the Tenderers' bankers who may provide references if contacted by the Employer:

1.9 Sl.No Name, address, telephone number & e-mail id of the Tenderers' bankers

Section 3: 1.12 Information on litigations in which the Tenderer is involved:

Other Party(ies) Employer Details of Dispute Amount involved Remarks showing Present Status

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-10 (1 of 3) Details of Tools and Plants available

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Kaveri Bhavan, Bangalore - 560 009

Following are the details of the Tools and Plants available with us.

Sl. No. Description Quantity Make Present Location / Project Remarks (if any)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (2 of 3) Details of Technical staff employed

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Kaveri Bhavan, Bangalore - 560 009

Section 3: 1.8 Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Sl. No. Name of the employee Designation Branch (Degree/Diploma) Year of Passing Since when employed in erection division Past Experience

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (3 of 3 )

SHEET FOR TECHNOCOMMERCIAL OPENING

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Kaveri Bhavan, Bangalore - 560 009

We propose the following deployment of manpower for the substation and Line package.

Sl. No. Category MONTHS AFTER PLACEMENT OF AWARD LETTER

1 Project manager

2 Sr. Project Manager

5 Skilled labour

6 No skilled labour

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11 (A) : COMPLETION SCHEDULE FOR STATION/TERMINAL BAYS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidders Name and Address: To,

The Chief Engineer, Electricity, Tendering & procurement, KPTCL, Kaveri Bhavan, Bangalore - 560009

We hereby declare that following schedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows

SL.NO Activity Establishing Sub-station/Terminal Bays

Commencement Completion

1 Detailed engineering

2 Procurement of bought out items / raw materials

3 Manufacturing & Testing

5 Setting up of site office, Sheds & stores etc.

7 Concreting for

a)Structure Foundations

b)Equipment and mounting structure foundadions

c)Cable trenches

2. Installation

8 Receipt(at site) of

a)Main equipment / spares

c)Insulators & Hardwares

d)Clamps & Connectors

e)Marshalling kiosks

f)Cables & Cabling Materials

a)Main structures

b)Equipment support structures

10 Equipment Erection

12 Bus bar erection

15 Completion of testing and ready for commissioning

16 Commissioning

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11B : COMPLETION SCHEDULE FOR TRANSMISSION LINES

SHEET FOR TECHNOCOMMERCIAL OPENING

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

Bidders Name and Address: To,

The Chief Engineer, Electricity, Tendering & procurement, KPTCL, Kaveri Bhavan, Bangalore - 560009

We hereby declare that following shedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows.

SL.NO Activity Transmission lines

Commencement Completion

1 Submission of Drawings

2 Completion of detailed engineering

3 Commencement of Manufacturing

4 Completion of Manufacturing

5 Readiness for testing

6 Readiness for Shipment

7 Receipt at Site

8 Completion of Shipment

1 Detailed Survey

2 Setting up of site office, sheds and stores etc.

3 Exacavation for foundations.

4 Foundations and other Civil Works

5 Erection of Tower alongwith accessories

6 Stringing of conductor/ groundwire alongwith accessories

7 Testing , Commissioning and Handing over.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 12 TYPE TESTS & TEST CHARGES OF EQUIPMENT/MATERIALS

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDERS SHALL INDICATE VARIOUS TYPE TESTS IN LIGHT BLUE COLOURED CELLS

ALL THE TYPE TESTS APPLICABLE FOR EACH OF THE EQUIPMENTS SHALL BE INCLUDED.

Bidders Name and Address To,

The Chief Engineer, Electricity, Tendering & procurement, KPTCL, Kaveri Bhavan, Bangalore - 560009

SL.No Details of Equipments Type Test Test Charges ( in Rs )

1 Power Transformers:

b) 100MVA,220/110kV

b) 10MVA,110/11kV

2 SF6 Circuit Breakers:

4 Current Transformer:

5 Voltage Transformers:

6 Capacitive Voltage Transformers:

7 Surge Arrestors

8 a) Relay & Protection Panels

b) Substation Automation

9 L.T. A.C Panel

10 Station Battery

11 Station Battery Charger

12 PLCC Battery

13 PLCC Battery Charger

14 1.1KV Copper control cables/LT Power Cable

15 11KV U.G Cable

16 PLCC equipment

17 Conductors & Earth Wire a) Drake ACSR

c) Coyote conductor

d) Lynx conductor

18 Insulators a) 120/90KN Disc Insulator Strings

b) Solid Core Insulators

c) Silicon rubber/ Disc/ Long rod insulators

d) Post Insulators

19 Station / Mounting Structures

21 Hardware Materials

22 Aluminium pipe and Clamps

23 AC DISTRIBUTION BOX

24 DC DISTRIBUTION BOX

25 Nitrojen Fire Fighting Protection System

NOTE: The Type Test / Special Tests, if repeated at the insistance of owner, the applicable testing charges shall be paid by the successful Bidder upfront to the laboratory and the same shall be reimbursable by KPTCL as per actuals on submission of Bills along with proof of payment and on successful completion of all the Type Tests, specified and on approval of the same by the owner. In case equipment/material fails in the type tests during testing then the testing charges paid by the Bidder to the laboratory will not be reimbursed by KPTCL. The above Clause is applicable for all the equipments/materials, in case, the Type Test / Special Tests, are repeated at the insistance of owner(KPTCL).

Place Printed Name

Karnataka Power Transmission Corporation Limited

Schedule -13-List of Optional Spares

SHEET FOR TECHNOCOMMERCIAL OPENING

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

BIDDERS SHALL NOTE THAT QUANTITIES INDICATED IN THE PERCENTAGE FINANCIAL BID OFFER SHALL BE INDICATED HERE ALSO.

Bidders Name and Address

To, The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Bangalore - 09.

List of optional spares required to meet the specified performance for a period of three years

Sl. No. For Equipments Details of item Unit Quantity

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 14-Guaranteed Losses

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidders Name and Address To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Indhana Bhavana, BANGALORE - 560009

Dear Sir, We Declare that the ratings and performance figures of the Transformers furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics mentioned below as established after conducting the factory test, you may at your discretion,reject or accept the equipment after assessing the liquidated damages as specified in relevant clause of Bid Document.

Sl no Equipment Guaranteed Losses at rated output (KW) at Principal Tap % Impedance at rated current and frequeny at 75 Deg C at Normal tap

Max. No Load Loss in KW at rated voltage & frequency Max. Load loss in kW at rated current and at 75 Deg C (at principal tap position) Max. I ²R loss at rated current and at 75 Deg C (at principal tap position) Max. Auxiliary Loss at rated voltage & frequency HV to IV HV to LV IV to LV

1 160MVA, 220/110/11kV Power Transformer

2 10MVA, 110/11kV Power Transformer Supplied by KPTCL

Note:(i) Refer Technical Specifications (ii)The loss quoted shall be consistent in Schedule 14 and GTPs(DRS) of Power Transformers

Equipment Max. Losses in Watts @ 50% Loading Max.Losses in Watts @ 100% Loading % Impedance (subject to tolerance as per IS:2026) Remarks

1 250KVA, 11KV/433V Auxiliary Transformer Note: Refer Technical Specifications for Auxiliary Transformer

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

LIST OF VENDORS

SHEET FOR TECHNOCOMMERCIAL OPENING

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

BIDDERS NAME AND ADDRESS To, The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Bangalore - 09.

Sl. No. EQUIPMENT/ MATERIAL NAME OF THE VENDOR

VENDOR 1 VENDOR 2 VENDOR 3 VENDOR 4

1 Power Transformers:

b) 10MVA,110/11kV

2 SF6 Circuit Breakers:

4 Current Transformer:

5 Voltage Transformers:

6 Capacitive Voltage Transformers:

7 Surge Arrestors

8 a) Relay & Protection Panels

b) Substation Automation

9 L.T. A.C Panel

10 Station Battery

11 Station Battery Charger

12 PLCC Battery

13 PLCC Battery Charger

14 1.1KV Copper control cables/LT Power Cable

15 11KV U.G Cable

16 PLCC equipment

17 Conductors & Earth Wire a) Drake ACSR

b) Coyote conductor

c) Lynx conductor

18 Insulators a) 120/90KN Disc Insulator Strings

b) Solid Core Insulators

c) Silicon rubber/ Disc/ Long rod insulators

d) Post Insulators

19 Station / Mounting Structures

21 Hardware Materials

22 Aluminium pipe and Clamps

23 AC DISTRIBUTION BOX

24 DC DISTRIBUTION BOX

25 Nitrojen Fire Fighting Protection System

Note : Any Other Materials name & its vendors are to be entered.

Place Designation

Name of the Company

SCHEDULE-16 : NO DEVIATION CERTIFICATE (ANNEXURE-I)

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

With reference to our Bid Proposal No dated

We hereby confirm that we have read the provisions of the contract, the stipulation of these clause are acceptable to us,

and we have not taken any deviation whatsoever to these clauses:

a) Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b) EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c) Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d) Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e) Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f) Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g) Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h) Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

We further confirm that any deviation to the above clauses at SI.No. (a) to (h) found anywhere in our bid proposal, implicit or explicit, shall stand unconditionally withdrawn, without any cost, implication whatsoever to KPTCL.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-17a FORM FOR BID SECURITY/EMD (ANNEXURE-IIA) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED AND SENT ALONG WITH ORIGINAL BANK GUARANTEE AND ORIGINAL DD (TOWARDS BID GUARANTEE ) TO CHIEF ENGINEER ELECTRICIYT (T&P),KPTCL BANGALORE SO AS TO REACH AFTER THE LAST SUBMISSION DATE & ON OR BEFORE THE DATE & TIME OF OPENING TECHNO COMMERCIAL BIDS.

Ref No. Bank Guarantee No.

In accordance with Invitation to Bid under your specification

No. M/s having its Registered /

Head Office at (hereinafter called the 'Bidder') wish

to participate in the said Bid or and you, as a special favour have agreed

to accept an irrevocable and unconditional bank guarantee for an amount of

valid up to on behalf of Bidder in lieu of the Bid deposit required to be made

by the Bidder as a condition predecent for participation in the said Bid,in addition to the Demand draft No.

we the Bank at having our Head office at

(local address) guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation

the amount of (in figures and words)

without any reservation, protest, demur and recourse. Any such demand made by said `Owner' shall be conclusive and binding on us irrespective of any dispute or difference raised by the Bidder.

This Guarantee shall be irrevocable and shall remain valid up to and including

If any further extension of this guarantee is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions

from M/s on whose behalf this guarantee is issued.

This Guarantee has been issued using SFMS Platform and the requisite communication in this regard has been forwarded to the Beneficiary Bank.

In witness whereof the Bank, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Bank Stamp.

Attorney as per Power of Attorney No.

Note : 1) Both the Bank Guarantee and Demand Draft shall be scanned and uploaded along with Electronic sheets. 2) This date shall be Forty Five (45) days after the last date for which the bid is valid.

Karnataka Power Transmission Corporation Limited

SCHEDULE-17b Form of Insurance Surety Bond towards EMD (ANNEXURE-IIB) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Insurance Surety Bond No.

In accordance with Invitation for Bids under your Bid Document No

M/s having its Registered /

Head Office at (hereinafter called the 'Contractor') wish

to participate in the said Bid for

As an irrevocable Insurance Surety Bond against Bid Security for an amount of * valid for days from **

required to be submitted by the Contractor as a condition precedent for participation in the said bid which amount is liable to be forfeited on the happening of any contingencies as mentioned under the Bidding Documents.

we, the having our Head office at

guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation Limited, (hereinafter called the 'Owner') the amount of

without any reservation, protest, demand and recourse. Any such demand made by the 'Owner' shall be conclusive and binding on us irrespective

of any dispute or difference raised by the Contractor and/or any right/remedy available to the Contractor in terms thereof.

This Insurance Surety Bond shall be unconditional as well as irrevocable and shall remain valid upto

If any further extension of this Insurance Surety Bond is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions from

M/s on whose behalf this Insurance Surety Bond is issued.

In witness where of the Insurer, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Insurer Stamp

Attorney as per Power of Attorney No.

NOTE: 1. (*) The amount shall be as specified in the SPC. (**) This shall be the last date of bid submission deadline. (@) This date shall be Forty Five (45) days after the last date for which the bid is valid 2. The Insurance Surety Bond shall be from an Insurer as per guidelines issued by Insurance Regulatory and Development Authority of India (IRDAI) as amended from time to time. 3. The Owner shall be the Creditor, the Contractor shall be the Principal debtor and the Insurance company/Insurer shall be the Surety in respect of the Insurance Surety Bond to be issued by the Insurer. 4. The Insurance Surety Bond should be on Non-Judicial stamp paper/e-stamp paper of appropriate value as per Stamp Act prevailing in the state(s) where the Insurance Surety Bond is submitted or is to be acted upon or the rate prevailing in State where the Insurance Surety Bond is executed, whichever is higher. The Stamp Paper/e- stamp paper shall be purchased in the name of Contractor /Insurer issuing the Insurance Surety Bond. 5. While getting the Insurance Surety Bond issued, Contractors are required to ensure compliance to the points mentioned in Form of Bank Guarantee/Insurance Surety Bond Verification Check List enclosed in this Section of Bidding Documents. Further, Contractors are required to fill up this Form and enclose the same with the Insurance Surety Bond.

Karnataka Power Transmission Corporation Limited

SCHEDULE-18 PROFORMA OF LETTER OF UNDERTAKINGS (ANNEXURE-V)

SHEET FOR TECHNOCOMMERCIAL OPENING

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

(To be executed on Non-Judicial paper of RequisiteValue)

1. I*/We* have read and examined the following bid documents relating to the

(full Scope of Work)

a) Notice Inviitng Tender

b) Conditions of Contract containing section 'Invitation for Tenders’, 'Instructions to Tenderers’, ‘Conditions of Contract’ and Contract Data.

c) Special Conditions of Contract along with Annexure to

d) Drawings No.

e) Technical Specifications

2 . I / We hereby submit our Bid and undertake to keep our Bid Valid for a period of One Hundred and Eighty days (180 days) from the Last date of bid submission as notified (either original or extended). I*/We* hereby further undertake that during said period I/We shall not vary/alter or revoke my/our Bid.

This undertaking is in consideration of KPTCL agreeing to open my/ our Bid and consider and evaluate the same for the purpose of award of Work in terms of provisions of clause entitled "Award of Construct" 'cl.no. 26 of Section ITT and cl.no. 18 of SCC of the Bid Documents.

Should this bid be accepted, I*/We* also agree to abide by and fulfil all the terms, conditions of provision of the above mentioned bid.

Signature along with Seal of Co.

(Duly Authorised to sign the Tender on Behalf of the Contractor.)

NAME OF THE COMPANY (in Block Letters)

SIGNATURE Date and Postal Address

DATE Telegraphic Address

NAME AND ADDRESS Telephone No.

Karnataka Power Transmission Corporation Limited

SCHEDULE-19 CONSORTIUM AGREEMENT (To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL(B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024) (ANNEXURE -XIII)

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED.

CONSORTIUM AGREEMENT AMONGST M/s M/s

For Bid Specification No. OF KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

This consortium agreement executed on this day Month of Two thousand Twenty Three

amongst M/s a company incorporated under the laws of (Country) and having its registered office at

(hereinafter called the "Lead Company" which expression shall include its successors ,executors and permitted assigns),

M/s a company incorporated under the laws of (Country) and having its registered office at

(hereinafter called the "Constituent Company" which expressions shall include its successors,executors and permitted assigns)

for the purpose of making a bid and entering into a contract (In case of award) against the specification no.

For NAME OF THE WORK

for Karnataka Power Transmission Corporation Ltd. having its registered office at Kaveri Bhavan , Bangalore 560 009 , Karnataka (hereinafter called the "Owner"). The leader of the consortium shall abide by the general terms and conditions specified by the Purchaser. WHEREAS the Owner invited bids as per the above mentioned specifications for the design, manufacture, supply and erection, testing and commissioning of Equipments/Materials stipulated in the bidding documents under subject package

NAME OF THE WORK

AND WHEREAS Section-I ( Volume-1: Clause No. 11:- Qualifying Requirement), forming part of the bidding documents, stipulates that a consortium meeting the requirements of Section-I, ( Invitation of Bid) applicable may bid, provided the Consortium fulfills all other requirements of specification and in such a case, the Bid shall be signed by the members so as to legally bind the members and who will be jointly and severally liable to perform the Contract and all obligations hereunder.

The above clause further states that the consortium agreement shall be attached to the bid and the contract performance guarantee will be as per the format enclosed with the bidding document without any restriction or liability for either party.

AND WHEREAS the bid has been submitted to the Owner vide proposal No dated

by Lead Company based on the Constituent agreement between all the consortium under these presents and the bid in accordance with the requirements of Specifications (Qualification Requirements).

NOW THEREFORE THIS UNDERTAKING WITNESSETH AS UNDER:

In consideration of the above premises and agreements all the partners to this consortium members do hereby now agree as follows:

1 In Consideration of the award of the Contract by the Owner to the Consortium members, we , the members to the consortium agreement do hereby agree that M/s

shall act as Lead Company and further declare and confirm that we shall jointly and severally be bound up to the Owner for the successful performance of the contract and shall be fully responsible for the design, manufacture, supply and successful performance of the equipments in accordance with the Contract.

2 In case of any breach of the said contract by the Lead company or other constituent of the Consortium agreement, the Lead company do hereby agree to be fully responsible for the successful performance of the contract and to carryout all the obligations and responsibilities under the contract in accordance with the requirements of the Contract

3 Further, if the Owner suffers any loss or damage on account of any breach in the contract or any shortfall in the performance of the equipment in meeting the performance guaranteed as per the specification in terms of the contract, the Lead company of these presents undertake to promptly make good such loss or damages caused to the Owner, on its demand without any demur. It shall not be necessary or obligatory for the Owner to proceed against Lead Partner to these presents before proceeding against or dealing with the other Partner (s).

4 The Financial liability of the members of the consortium agreement to the Owner, with respect to any of the claims arising out of performance or non-performance of the obligations set forth in the said agreement, read in conjunction with the relevant conditions of the contract shall, however not be limited in any way so as to restrict or limit the liabilities of any of the members of the agreement.

5 It is expressly understood and agreed between the members to this consortium agreement that the responsibilities and obligations of each of the partners shall be as delineated hereunder (To be incorporated suitably by the member to this agreement). However, each member of the consortium will be severally and jointly responsible for the faithful performance of the contract. It is further agreed by the member that the above sharing of responsibilities and obligations shall not in any way be a limitation of joint and several responsibilities of the members under this contract.

Sl.No. Name of the Lead Bidder/Consortium Partner. Scope of the work/Participation

We further declare ourselves bound to execute our scope of work/participation as stated above;

6 This Consortium agreement shall be constructed and interpreted in accordance with the laws of India and the courts of Bangalore shall have the exclusive jurisdiction in all matters arising there under.

7 In case of an award of a Contract, we the Consortium members do hereby agree that we shall be jointly & severally responsible for the works respectively executed and Lead company shall furnishing a contract performance security from a bank in favor of the PURCHASER in the forms acceptable to purchaser for value of Five percent (5%) of the Amount put to tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 25.5 & 29 of ITT and Clause 43 of the CC (Conditions of Contract).

8 It is further agreed that the Consortium agreement shall be irrevocable and shall form an integral part of the contract, and shall continue to be enforceable till the owner discharges the same. It shall be effective from the date first mentioned above for all purposes and intents.

IN WITNESS WHEREOF the partners to the Consortium have through their authorized representatives executed these presents and affixed Common seals of their companies, on the day, month and year first mentioned above.

WITNESS for Lead Company

(Signature) (Signature of the authorized representative)

(Name in Block Letters) (Name)

Designation (Designation)

Common Seal of the Company

2 ( For Constituent 1)

(Signature of the authorized representative)

(Name in Block Letters) (Name)

Designation Common Seal of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-20(a) POWER OF ATTORNEY (ANNEXURE-XI)

(For Individual Bidder / Lead Partner of Consortium)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED.

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation)

For and on behalf of

Common Seal of the above Manufacturer/Bidder

Has been affixed thereto in the presence of :

Karnataka Power Transmission Corporation Limited

SCHEDULE-20(b) POWER OF ATTORNEY (ANNEXURE-XV)

(FOR CONSORTIUM MEMBER)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

POWER OF ATTORNEY

(To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation)

For and on behalf of

Common Seal of the above Manufacturer/Bidder

Has been affixed thereto in the presence of :

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

Bidders Name and Address

To, The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Bangalore - 09.

We Declare that the ratings and performance figures of the equipment furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics as established after conducting the performance test, you may at your discretion, reject the equipment, in which case we shall replace the same with equipment as per specification and meeting the guarantee, free of charge and within a resonable time, to be mutually agreed.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE -22 - Check List

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

BIDDERS NAME AND ADDRESS To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, Kaveri Bhavan, BANGALORE - 560009

CHECK LIST FOR SUBMISSION OF SCHEDULES

REFERENCE OF FORM & SCHEDULE DETAILS OF FORM & SCHEDULE WHETHER INCLUDED IN TECHNO-COMMERCIAL SHEETS (ELECTRONIC) YES/NO WHETHER INCLUDED IN PERCENTAGE RATE Financial Offer (ELECTRONIC) YES/NO WHETHER INCLUDED IN COMMERCIAL

PROPOSAL BID PROPOSAL

Schedule - 1 PRICE COMPONENTS

Schedule 2 (1 of 2 & 2 of 2) Summary of Price Components

Schedule 2A Schedule of Discounts

Schedule 2B Statement of Commercial Terms & Conditions

Schedule 3A & 3B Price break up for supply & erection

Schedule 3C Price break up for civil works

Schedule 4 Price break up for mandatory spares and maintenance & Testing Equipments.

Schedule 5 Commercial deviations

Schedule 6 Technical deviations

Schedule 7 List of special Tools & Tackles

Schedule 8 Additional information.

Schedule 9 Qualification Information [Technical & Financial]

Schedule 10 Details of Tools and plants and man power deployment

Schedule 11 A & 11B Schedule for activities & Commissioning.

Schedule 12 Type Test Charges

Schedule 13 List of optional spares and cost.

Schedule 14 Guaranteed loss of transformer.

Schedule 15 List of vendors.

Schedule 16 Annexure 'A' No deviation certificate

Schedule 17a & 17b Proforma for Bid guarantee

Schedule 18 Proforma for letter of undertaking

Schedule 19 Consortium Agreement

Schedule 20a & 20b Power of attorney for Individual Bidder / Lead Partner of Consortium and Consortium Member

Schedule 21 Guaranteed Declaration

Schedule 22 Check list

DRS 1-45 Relevant Technical details for Materials / Equipments

To be Uploaded Contract Quality Assurance Programme

To be Uploaded Type Test Certificates

To be Uploaded & furnished Bid Security/EMD

To be Uploaded Written Power of Attorney

To be Uploaded Letter of Undertaking

To be Uploaded No Deviation Certificate

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

DRS - 1 for 100 MVA Tr.

A1 : GUARANTEED TECHNICAL PARTICULARS FOR POWER TRANSFORMERS - 220/110/11kV, 160MVA

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

Class of Power Transformer 160 MVA, 220/110/11kV Power Transformer

1 Name of the Manufacturer and country of origin

2 Reference standard

3 Service [Indoor/outdoor]

4 Continuous rating under conditions specified in IS-2026 Part-I, 1977 Clause No.3 : HV

a. 1. With ONAN cooling - MVA

2. With ONAF cooling - MVA

3. With OFAF cooling - MVA

b. Rated no load voltage

6 a. Rated Frequency : (Hz)

b. Number of phases

7 Current at rated voltage and on principal tap-Amp :HV

8 Maximum hot spot temperature rise calculated by formula Deg C

9 Flux density at rated voltage and rated frequency in tesla

10 Temperature rise of top oil, oC by the thermometer.

11 Temperature rise of winding measured by resistance.

a. With ONAN cooling oC

b. With ONAF cooling oC

c. With OFAF cooling oC

d. Period of operation of transformer at full load without calculated winding hot spot temperature exceeding 140oC and when

50% coolers fail

100% coolers fail (refer clause no. 7.9)

12 No. of windings

13 Connections HV

14 Connection Symbol and vector group

a. Type of tap changer

b. Tap step (percent)

c. Total tap range (+) percent to (-) percent

d. Tappings provided at

e. Type of regulation :

Constant flux regulation

Variable flux regulation

Combined regulation

16 (A) Magnetisation data at no load, at rated frequency (along with tolerance if any)

a. Current in Amps

b. Power factor

c. Loss in KW (core loss + dielectric loss)

d. Max. flux density in lines/sq.cm.

i. At 90% rated no load voltage

ii. At 100% rated no load voltage

iii. At 110% rated no load voltage

iv. At maximum rated primary voltage (i.e. 105% rated no load voltage)

16 (B) i) Max.No-load loss at rated frequency at Principal Tap (KW) 0

ii) Max. No-Load loss at voltage corresponding to the Highest Tap (KW)

17 Max. Load loss in KW at rated current and at 75◦C At lowest tap At principal tap At highest tap

a. For ONAN rating in KW

b. For ONAF rating in KW

c. For OFAF rating in KW 0

Max. I2R loss in KW at rated current and at 75◦C

a. For ONAN rating in KW

b. For ONAF rating in KW

c. For OFAF rating in KW 0

Max. Auxiliary Loss at rated Voltage & frequency 0

Note for Sl. No. 16 & 17: Guaranteed values of the losses shall be indicated which shall be firm & without indicating the tolerance limit.

18 Impedance at rated current and frequency at 75oC on Line MVA base. HV to IV HV to LV IV to LV

a. At normal tap in %

b. At max. voltage tap in %

c. At min. voltage tap in %

19 Reactance at rated current and frequency and normal tap on rated MVA base:

20 Zero sequence impedance at reference temperature of 75oC at principal tap ………….%

NOTE: 1) The above impedance values shall be achieved with the winding arrangement at the discretion of the manufacturer without using reactor for 220/66/11kV, 100MVA & 150MVA Transformers. 2) The above impedance values shall be achieved with the winding arrangement for 150MVA, 220/110/11kV Auto Transformer as follows: CORE – LV – IV – Regulating – HV without using reactor. 3. The tolerance for the above impedance values shall be as per IS 2026- Part I (2011) or latest version

21 Resistance at 75oC

HV winding in Ohms in %

IV winding in Ohms in %

LV winding in Ohms in %

22 Efficiency at 75oC as derived from guaranteed.loss figures At Unity p.f At 0.8 p.f

a. At 125% full load

b. At 100% full load

c. At 75% full load

d. At 50% full load

23 a. Maximum efficiency ………….%

b. Load at which maximum efficiency occurs (% of full load)

24 Regulation at full load and at 75oC

a. At unity p.f. in %

b. At 0.8 p.f. (lag) in %

25 a. Short time thermal rating of LV winding/tertiary winding in KA & duration in seconds.

b. Short time thermal rating of IV windidng in KA & duration in seconds.

c. Short time thermal rating of HV winding in KA & duration in seconds.

26 Permissible overloading - HV

27 Test voltages HV IV LV

a. Lighting impulse withstand kV (peak)

b. Power frequency voltage withstand kV (ms)

c. Switching impulse withstand kV (peak)

28 Partial discharge level at 364 kV as per IEC 44(4)

29 RIV at 1.1 times minimum phase to ground voltage

30 Design value of surges transferred on tertiary terminals.

a. For 950 kV peak. 1.2/50 micro second surge striking HV terminal and with :

i. Both the open delta tertiary terminals open kV (peak).

ii. One of the open delta tertiary terminals earthed kV (peak).

b. For 550/325 kV peak 1.2 / 50 micro second surge striking IV terminal & with :

i. Both the open delta tertiary terminals open kV (peak).

ii. One of the open delta tertiary terminals earthed k V (peak).

31 Noise level when energised at normal voltage and normal frequency at no load (db)

32 External short circuit withstand capacity (MVA) & duration (seconds)

33 Over flux withstand capability of the transformer :

34 Insulating and cooling medium

35 Approximate weights

b. Windings (Kg)

c. Tank & Fittings (Kg)

e. Untanking weight (Kg)

f. Total weight (Kg)

36 Required quantity of oil in litres

37 Terminal arrangement

ADDITIONAL TECHNICAL PARTICULARS:

1 Details of Core (along with Tolerance if any):

a. Type of core configuration

b. Type of core joints

c. Flux density at 90% of rated voltage and frequency Tesla :

d. Flux density at 110% of rated voltage and frequency. Tesla :

e. Material of core lamination

f. Approximate core weight

g. Type of Joints used between core limb and yoke

2 Details of Windings:

a. Conductor area in sq.cm and current density in Amps/Sq.cm (at rated current). Current density A/sq. cm Conductor area sq.cm

b. Material of winding conductor

c. Approximate weight of winding (along with tolerance if any)in kgs Kgs

d. Type of windings

e. Winding insulation Type and class Graded or ungraded

f. i. Insulating material used for :

1. Regulating winding

ii. Between HV and IV and LV as applicable

iii. Between core & LV side.

iv. For core bolts, washers and end plates

v. Regulating winding & earth.

g. i. Type of axial coil support

ii. Type of Radial coil support :

h. Core bolt insulation voltage

i. Details of special arrangement provided to improve surge voltage distribution in the windings

j. Approximate weight of winding (Kgs) (Tolerance if any on the above)

k. Minimum clearance (mm) In oil In Air

Between Phases Phase to ground Between Phases Phase to ground

3 Details of Tank :

a. Material for Transformer Tank

b. Type of the tank

c. Mininum thickness of sheet

ii. Bottom (mm)

iii. Cover (mm)

iv. Cooling tubes/Radiators (mm)

d. Vacuum recommended for hot oil circulation (torr)

e. Vacuum to be maintained during oil filling in transformer tank (torr)

f. Vacuum to which the tank can be subjected without distortion (torr)

Transverse Axis Longitudinal Axis

g. No. & size of bi-directional wheels provided.

h. Track gauge required for the wheels

4 Details of painting at works and site

5 (a) Minimum clear height for lifting bell and for lifting core & windings from tank (mm) (untanking height).

(b) Minimum clear hieght for lifting (mm)

II. Bushings - HV

- HV / IV Neutral

6 Shipping details :

i. Parts detached for transport

ii. Weight of heaviest package in Kgs

iii. Weight of other heavy packages in Kgs

iv. Dimensions of largest package

a. Length in mm

b. Breadth in mm

c. Height in mm

v. Dimensions of other heavy packages:

a. Length in mm

b. Breadthin mm

c. Height in mm

7 Details of Bushings HV IV LV Neutral

b. Rated voltage class - KV

c. Rated current - Amps

d. Power frequency, visible corona discharge voltage - kV (ms)

e. One minute dry withstand power frequency voltage - kV (ms)

f. One minute wet withstand power frequency voltage - kV (ms)

g. Under oil Flashover or Puncture power frequency voltage - kV (ms)

h. 1.2 / 50 ms. Lighting impulse withstand voltage - kV (Peak)

i. Switching surge withstand voltage - kV (peak)

j. Under oil Flashover or puncture impulse voltage - kV (peak)

k. (a) Creepage Distance in air

(b) Creepage Distance (protected)

l. Quantity of oil in bushing and specification of oil used (Kgs)

m. Whether test tap is provided

n. Weight of assembled bushing

o. Phase to earth clearance in air of live parts at the top of bushing.

8 Cooling system

a. Grade of oil

b. Total weight of oil in radiator in Kgs/litres

c. Total weight of radiator without oil in Kgs.

d. Total radiating surface in square meters

e. Method of drying out transformer at site

f. Type and make of material used for the radiators with size.

g. Type of radiator

h. Total number of Radiators/Banks for transformer and over all dimensions.

i. Rating of Transformer with one radiator bank out of service.

j. Total weight of radiators in Kgs

k. Type of mounting

l. Vacuum withstand capability

9 Cooling equipment Fan Motor Pump Motor

a. Make and Type (Details)

b. Number of connected units (nos.)

c. Number of standby units (nos.)

d. Rated Power (KW)

e. BHP of driven equipment

f. Capacity (cu m/min) or (Litres/Minute)

g. Rated voltage (Volts)

h. Locked rotor current (Amps)

i. Temperature range for which control is adjustable

j. Efficiency of motor at full load (percent)

k. Temp. rise of motor at full load (oC)

l. Whether the fan and/or pumps suitable for continuous operation at 85% of their rated voltage

m. Estimated time constant in hours for

i. Natural cooling

ii. Forced air cooling

10 On Load Tap Changing gear

c. Power flow (uni-directional or bidirectional or restricted bi-directional)

d. Rated voltage to Earth kV

e. Rated maximum current Amps

f. Step voltage V.

g. Number of steps

h. Control : Manual / Auto / Local / Remote / Independent / Parallel.

i. Auxiliary supply details

j. Voltage control (whether automatic or manual)

k. Line drop compensation Provided / Not provided.

l. Protective devices

m. Time for complete tap change (one step) sec.

n. Divertor selector switch Transient time - Cycles.

o. Value of maximum short circuit current Amps.

p. Maximum impulse withstand test voltage with 1.2/50 micro seconds full wave between switch assembly and earth (kV peak)

q. Maximum power frequency test voltage between switch assembly and earth - kV rms.

r. Maximum impulse withstand test voltage with 1.2/50 micro seconds across the tapping range (kV peak).

s. Approximate over all dimensions of Tap Changer in mm.

t. Approximate over all weight Kgs.

u. Approximate over all quantity of oil-ltrs/Kgs.

v. Particulars of the OLTC control panel for installation in the control room.

11 Over all dimensions of transformer including cooling gear, tap changing gear etc.

d. Reference drawing No.

12 Whether oil temperature indicator provided (Yes/No).

13 Type of oil level indicator and whether supervisory alarm contact for low oil level provided (Yes/No)

14 Type and size of Gas operated relay and whether supervisory alarm and trip contacts provided and their size and Nos.

15 Temperature indicators Oil Temp. indicator Winding temp. indicator

a. Make and Type

b. Permissible setting ranges for alarm & trip.

c. No. of contacts

d. Current rating of each conntact

e. Whether remote indicator provided, if, so, whether equipment required at purchaser's control room is included.

f. Size and No.

16 Ratio and Type of CT used for winding temperature

17 Type and size of Thermostat used

For Tr. Tank OLTC

18 No. of Breathers provided (No.)

19 Type of deehydrating agent used for breathers

20 a. Capacity of conservator vessel litres

b. Volume between the highest and lowest visible oil level (litres)

21 Valve sizes and number required/ fitted

a. Drain valves - mm - No.

b. Filter valves - mm - No.

c. Sampling valves - mm - No.

22 a. Type and make of pressure relief device

b. No. of each type of devices per transformer unit (Nos.)

c. Minimum pressure at which the device operates (Kpa)

23 Details of current transformers provided for tertiary

a. Type and voltage class

b. No. of cores (Nos.)

d. Accuracy class

f. Accuracy limit factor

24 Lifting jacks

a. Governing standard

b. No. of jacks in one set

d. Capacity (tonnes)

g. Height in clsed position (mm)

h. Mean diameter of thread (mm)

25 Characteristics of Insulating oil to be used

Viscosity at 40 ºC in mm²/s

Viscosity at -30 ºC in mm²/s

Pour point in ºC

Water content in mg/kg

Breakdown voltage in kV

Density at 20 ºC in g/ml

Particle content

2 – Refining/stability

Acidity in mg KOH/g

Interfacial tension in mN/m

Total sulphur content

Corrosive sulphur

Potentially corrosive sulphur

Inhibitors of IEC 60666 in %

Metal passivator additives of IEC 60666 in mg/kg

Other additives

2- Furfural and related compounds content in mg/kg

3 - Performance

Oxidation stability for uninhibited oil – 164 hrs

-Total acidity in mg KOH/g

Gassing tendency

4 – Health, safety and environment (HSE)

Flash point in ºC

PCA content in %

PCB content in mg/kg

5 – Carbon Composition FTIR method CA %

6 – Details of oil preserving equipment offered.

NOTE: 1. HV: High Voltage. IV : Intermediate voltage IN : Low voltage 2. Regulation of Transformers: Each tap shall be designed for the full rated MVA without exceeding the temperature and shall withstand continuously 15% voltage above the rated voltage of the tap. 3. Insulation for 100 MVA transformer: The HV & MV winding of the transformer shall have graded insulation. The insulation class of the neutral end of the winding shall be graded to 170 KVP (impulse) mid 70KV (power frequency withstand). The 11 KV tertiary winding and terminals shall be capable of withstanding the surge voltage of 170 KV 4. Frequency:- the transformer shall be Suitable for continuous operation with a frequency variation of ±5% from normal of 50Hz without exceeding the specified temperature rise. 5. Impedance: Supplier shall indicate the guaranteed impedance and tolerance. Impedance shall include positive and zero sequence and shall be expressed in terms of the branches of the star connected equivalent diagram, all on the same MVA basis and the range shall be given for each branch of the equivalent circuit in turn

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

GUARANTEED TECHNICAL PARTICULARS OF Monopole

Sl. No. Descreption. Unit

220 kV DC - Monopole type 2P3+3M(30° to 60°/ DE(0°-15°) Normal, +3.0 M Extn.,

I 1. Name of Designers of Poles

2. Name of fabricators of Poles

II Maximum working stresses employed in Design:

1 Tension on net section area Kg/Sq.mm

2 Compression on gross sectional area Kg/Sq.mm

3 Outer diameter of the pole at top and bottom M

4 Thickness of the wall mm

5 Maximum length of each unit of pole M

6 Type of joint adopted for connecting each unit.

III Other Particulars:

1 Standards according to which properties of sections have been adopted in designs.

2 Standards to which the quality of steel for the sections have been adopted in designs.

3 Standards to which galvanizing will conform.

4 Maximum percentage increase in monopole weight due to galvanization.

5 Quantity of zinc required per ton of monopole weight.

6 Sizes of bolts and bolts holes.

7 Standards to which bolts and nuts will conform.

8 Name of manufacturer of bolts and nuts.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

Tender Enquiry No: KPTCL/2026-27/SS/WORK_INDENT3781

a) Establishing 2X160MVA, 220/110 kV & 1X10MVA, 110/11kV sub-station with "KIOSK Based arrangement" at Chadachan (Devarnimbaragi) in Chadachan taluk, Vijayapur district. b) Construction of 220KV DC line on DC towers from existing 220kV Indi sub-station to proposed 220kV Chadachan (Devaranimbaragi) sub-station for a distance of 29.628Kms using AAAC Moose conductor in Indi Taluk Vijayapur District. c) Construction of 2 nos. of 220 kV Terminal Bays at the existing 220/110kV Indi sub-station for terminating 220kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district d) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi) sub-station to 110 kV Dhulkhed sub-station for a distance of 27.317kms using Panther conductor in Indi Taluk , Vijayapur District. e) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110/11 kV Dhulakhed sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district f) Construction of 110 KV DC line on DC towers from proposed 220kV Chadachan (Devarnimbaragi ) sub-station to 110 kV Jigajevanagi sub-station for a distance of 5.843kms using Panther conductor in Indi Taluk , Vijayapur District. g) Construction of 2 nos. of 110 kV Terminal Bays at the existing 110kV Jigajevanagi sub-station for terminating 110kV DC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapur district. h) Construction of 110 KV SC line on DC towers from proposed 220kV chadchan(Devarnimbaragi) sub-tation to 110 kV Kerur sub-station for a distance of 19.16kms using Panther conductor in Indi Taluk , Vijayapura District. i) Construction of 1 no. of 110 kV Terminal Bay at the existing 110kV Kerur sub-station for terminating 110kV SC line from the proposed 220kV Chadachan sub-station in Indi taluk & Vijayapura district. j) Construction of 110 KV LILO line from existing 110KV Zalki-Chadachan line to proposed 220kV Chadachan(Devarnimbaragi) station using Lynx conductor for a distance of 8.460kms in Indi Taluk, Vijayapur District. on Partial Turnkey basis, including Supply of all Materials/Equipments (Excluding Supply of 1X10MVA,110/11kV Power Transformer & 11kV Switchgear), Erection (including Dismantling and Civil Works) of all Materials/Equipments, Testing and Commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR CIRCUIT BREAKERS

(Bidder is to indicate technical data for each type of rating)

Circuit Breaker Rating 220kV 220kV 220kV 110kV 110kV 110kV

a. Name of the Manufacturer

b. Country of Manufacture

c. Type of Circuit Breaker

d. Manufacturer's type designation

e. Standard Applicable

f. Rated Voltage (kV ms)

g. Rated Current :

i. Under normal condition (A)

ii. Under site conditions (A)

h. Rated frequency (Hz)

i. Number of poles

j. Whether 3 pole or single pole unit

k. Whether all the 3 poles ganged electrically or mechanically

l. Whether dead tank or live tank design

m. Type of installation

n. No.of breakers per pole

o. Latching Current (kA)

2 Guaranteed Ratings

a. Rated short circuit breaking current

i. Symmetrical component at highest system voltage (kA)

ii. DC Component (%)

iii. Asymmetrical breaking current at highest system voltage (kA)

b. Rated Making Capacity

i. At higher rated voltage (kAp)

ii. At lower rated voltage (kAp)

c. i. Maximum Total break time under any duty condition for any current up to rated breaking current with limiting conditions of voltage and pressure (ms)

ii. Rated break time

d. Closing time (ms)

e. Minimum opening time under any condition with limiting voltage and pressure (ms)

g. Maximum close open time under any condition with limiting voltage and pressure (ms)

h. First pole to clear factor

i. Short time current rating (kA) for 1 Sec.

j. Rated operating duty

k. Maximum breaking capacity under kilometric faults and rated TRV characteristic (kAp)

l. Maximum breaking capacity under phase opposition (kAp)

m. Maximum line charging breaking current with temporary over voltage up to 1.4 p.u. (A)

n. Maximum over voltage (p.u.) on switching transformer on no load and corresponding charging current

o. Maximum period between closing of first contact & last contact in a pole (ms)

p. Maximum pole discrepancy (ms)

q. Maximum arc duration and corresponding current under lockout pressure.

r. Small fault current breaking capacity (kAp)

s. Maximum temperature rise for main contacts over design ambient temperature of 50oC

t. Rated voltage & pick up range for trip coil (V)

u. Rated voltage & pick up range for closing coil (V)

v. Rated pressure and limits of pressure of operating mechanism

w. Rated pressure and limits of pressure of extinguishing medium

x. Minimum dead time for

i. Three phase reclosing (ms)

ii. Single phase reclosing (ms)

3 Dielectric withstand of complete breaker

a. One minute dry & wet power frequency withstand voltage

i. Between live terminal and ground (kV rms)

ii. Between terminals with breaker contacts open (kV ms)

b. 1.2/50 micro impulse withstand test voltage

i. Between live terminals and ground (kVp)

ii. Between terminals with breaker contacts open (kVp)

c. Corona extinction voltage (kV rms)

d. Maximum radio interference voltage (micro V) at 1.1 Ur/v3

e. Total creepage distance

i. To ground (mm)

ii. Between terminals (mm)

4 Operating Mechanism

a. Type of operating mechanism for

b. Manufacturer's type designation

c. Normal power consumption (W) at rated voltage

ii. Closing coil

4.1 Pneumatic operating mechanism

a. Rated operating pressure (kg/sq.cm)

b. Range of pressure for (kg/sq.cm)

c. Air Consumption at rated pressure for

i. Closing (m3)

ii. Opening (m3)

iii. Close-open (m3)

d. Pressure drop/meter length of piping

e. Number and Capacity (m3) of breaker local air storage receivers

f. No. of close operations for which sufficient air is available in local receiver

g. Capacity of compressor (m3xhr) and working pressure (kg/cm2)

h. Maximum time for which compressor can operate continuously (min)

i. Time to fill

i. Air receiver after one CO operation (min)

ii. For making up of losses occuring in 4 hours (min)

j. Pressure at which compressor

i. Stars (kg/cm2)

ii. Stops (kg/cm2)

k. Material of compressed air piping

l. Inner & outer dia of main piping (mm)

m. Whether interpole piping included in scope of supply

n. Manufacturer's name for

ii. Air receiver

iii. Pressure reducer

iv. Stop valves

v. Drain valves

o. Safety valve

i. Low pressure stage blow off at (kg/cm2)

ii. Intermediate stage blow off at (kg/cm2)

iii. High pressure stage blow off at (kg/cm2)

p. Safety valve opens at (kg/cm2)

q. No.of stored CO operation in breaker air receiver

r. Alarm switch closes on air receiver at (kg/cm2)

s. Lockout pressure (kg/cm2)

iii. Auto reclose

4.2 Hydraulic operating mechanism

a. Rated pressure of oil in operating cylinder (Kg/cm2)

b. Limits for pressure (Kg/cm2)

c. Quantity of oil (liter)

d. Details of arrangements to prevent change of position of breaker in the event of loss of hydraulic pressure.

e. Details of monitoring arrangement for hydraulic pressure.

f. No. of close -open operations possible after loss of AC supply to drive motor.

g. Details of hand pump set provided for emergency operation.

h. Pressure drop starting from lowest pressure at which motor starts for

i. C - operation

ii. O - operation

iii. CO - operation

iv. O - CO - operation

v. 2 - CO - operation

i. Time required to make up pressure upto loss of nitrogen pressure after

i. C - operation

ii. O - operation

iii. CO - operation

iv. O - CO - operation

v. 2 - CO - operation

4.3 Spring charged mechanism

a. Number of close open operations possible after failure of AC supply to motor.

b. Time required for motor to charge the closing spring (min).

c. Whether indication of spring charged condition provided in central control cabinet.

5 Type of Breakers

5.1 SF6 Circuit Breakers :

a. Quantity of SF6 per pole (m3) at rated pressure.

b. Guaranteed maximum leakage rate per year.

c. Rated pressure of SF6 in operating chamber (kg/cm2).

d. Limits of pressure at which breaker operate correctly (kg/cm2)

e. Standard to which SF6 gas complies.