Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.8 LAccepted-AOC 6 290 MUTHA GOWDER LINE WELLINGTON BARRACKS THE NILGIRIS 643 231 | THE NILGIRIS | TAMIL NADU | 643231 | L1 | Accepted-AOC BEING L1 BIDDER | |
| 2 | L2₹27.3 L+₹3.3 L (13.7%)Rejected-Finance C 101 ADG P CHENNAI | L2 | Rejected-Finance BEING NOT L1 BIDDER |
Tender Value
₹22.8 L
EMD Value
₹45,500
Closing Date
17 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Ashwani Mittal EE GE DSSC
GE DSSC WELLINGTON BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
ADDITION ALTERATION TO JOINERY INCLUDING PROVISION OF CUPBOARDS AND ALLIED WORKS AT OFFICE SECTT AT DSSC WELLINGTON
2023_MES_617017_2
8345/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASE REFER TENDER DOCUMENTS AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹45,500
Yes
6 Nov 2023
29 Sept 2023
19 Oct 2023
29 Sept 2023
17 Oct 2023
30 Sept 2023
Amount
Demolition of floor hearth or wall tiling including cement mortor bedding as required at site and backing coat and cutting out broken tiles including removing rubbish off the premises i.e., outside MD land complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness, including cover fillets complete all as specified and as directed.
Taking down door/window chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and as directed.
Demolition for brickwork or stone masonry of any description laid with cement mortar or cement lime mortar complete all as specified and as directed.
M&L Light shade coloured Virified Ceramic tiles 8mm to 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded stone aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:6) complete all as specified and as directed.
Material and Labour for precast cement concrete solid building blocks Masonry 10cm thick (with plain or interlocking joints as irected) type B-1 using 20mm graded stone aggregate setting in mortar, complete, in wall in CM(1:4) complete all as specified and as directed.
Material and labour for Rendering in Cement Mortar 1:6, 15mm thick on brick masonry or fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for coloured glazed ceramic tiles of size 300mm x 600mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and as directed.
Cutting into old masonry to form toothings for and bonding in new brick or stone work including making good in cement mortar complete all as specified and as directed.
Supply and fix factory made UPVC white colour Two track four panels sliding glazed door made of (big series) frame 67 mm x 50 mm & sash 46 mm x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto 10.00 sqm) comprising of UPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension UPVC extruded glazing beads, UPVC extruded interlock and UPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), Make : AMD overseas Ltd/SIMTA Astrix//GADLI Industries with following specification.
G.l fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. by Engineer-in-Charge. Note:(i) For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.all as specified and directed..(ii) Quoted rate is deemed to be inclusive necessary cost of glass and mesh as required. Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.
Supply and fixing 18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed..Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra.Make : Century/Action Tesa.
Supply and fixing Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH
Supply and fixing Stainless steel handle of size 150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH
Supply and fixing Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and as directed.. MAKE: EBCO/ GODREJ / KAFF / HETTICH
Supply and fix Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc conforming to Fe-410- W(GdeE-250) quality B complete all as specified and as directed.
Material and labour for 2nd class hard wood scantling as in rafters, purlins, trusses etc. clean sawn complete all as specified and as directed.
M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed..
Taking down old Glass partition including wooden framing carefully and refix on the same position incl necessary drilling,cutting and repair any damaged lap joints with necessary scantling pieces if required and finish the wooden surface with one coat of French polish incl preperation of the surface ,including redone the puttying portion of glass and beading etc all as directed.
Taking down old PVC solid /Prelaminated partition of heiht exc 1metre but n.exc 2 metre from the floor/wall portion and refix the same after tiling etc incl necessary drilling,bolting and making good the surface complete all as directed.
M&L for Providing Gypsum board False ceiling using 12mm thick Gypsum board panels of size as approved by GE, fixed with staples on powder coated standard galvanized iron snap grid frame work of size suitable to fixing Gypsum board using 'T' and angle sections made out of 0.5mm thick PGI sheet, grade of zinc coating 220, bent to shape required as in main member, secondary member, perimeter angle section including provn of G I channel suspender fixed to roof members at the rate of 1200mm c/c and interspaced at 610mm c/c, the main fixing channel shall be fixed through fasteners clips as per manufacturer's instructions with and including plaster of Paris decorative type cornice all around at the junction of wall and ceiling including taking down and refixing of electrical fittings etc., complete all as specified and as directed.. Note: The unit rate quoted shall be deemed to include the cost of taking down and refixing of the electrical fittings such as ceiling fan, light fittings etc., and keep in safe custody of same till refixing. The unit rate includes taking down of existing false ceiling completely.(ii) The unit rate includes taking down of existing false ceiling of any description completely.Make : Armstrong/Aerolite/Gypframe
M&L for Preparing of gypsum board false ceiling with primer and applying 3 mm thick wall care putty and applying two coats of OBD over one coat of primer complete all as manufacturer instructions and as directed.
S&F 9/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixedwith hidden screws to steel/wooden frame work including necessary frame work complete all as specified and as directed. Make : Syntex/Rajshree plastiwood pvt ltd Note : Quoted reates are inclusive of necessary frame work.
M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels, kitchen platform etc over 1.5m span complete as specified and as directed..
M&L for use & waste of steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. to flat rough finished surfaces of concrete square or rectangle complete as specified and as directed..
Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:3, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing and rounding to edges of stone slabs etc., complete all as specified and as directed..
M&L for complete removal of existing treatment on surfaces of wall and applying with white putty of average thickness 3mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer by approved applicator of the manufacturer of the paint and all as specified and as approved
M&L for complete removal of existing treatment on surfaces of ceiling and applying with white putty of 3mm thick and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer by approved applicator of the manufacturer of the paint and all as specified and as approved for smooth finished suface of ceiling complete all as specified and as directed..
Supply and fix UPVC Partition consisting of 7mm thick coloured solid UPVC ply sheet reinforced with frame work made from 60mm x 60mm Casement frame including necessary drilling,jointing and fill the gap with necessary solvent,and fixing all required cleats,brackets ,channels etc all as specifed and directed. by the Engr In charge.Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix. Note : Partition shall be designed according to the approval of GE and the cost shall be deemed with cost of neccesary glass/PVC panelling according to the design)
M&L 100mm thick PCC 1:3:6 type D2 (40 mm graded stone aggregate) as in floor, platform etc concrete finished even and rough to receive the top layer complete all as specified and as directed.
Material and labour for two coats of Varnish on wooden surface of any discription and in any position on new/old wooden surfaces including preperation of the surfaces area or girth exc 10sqcm complete all as specified and as directed.
M&L Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed. by Engr-in-Charge. NoteNote:Old existing 2' x 2'/4ft/2ft light fittings and Surface type ceiling and picture lights of any size/type taken down/dismantled to be deposited to MES E/M Storeyard and cost of transportation of the same from site of work to MES E/M Storeyard is deemed to be included in the unit quoted rates.
Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed. by Engr-in-Charge. NOTE for Item Nos 69 to71 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.
M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed. for One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps.: Make of cable : Havells/Polycab/Finolex.Make of conduit-Precision/Bajaj plast/finolex
Description all as per Item No.36 above, but One switch socket outlet point 5/6 Amps on independent board.
Description all as per Item No.36 above, but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete. NOTE for Item Nos 36 to 38 : 1) Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.
M & L for concealed sub-main wiring alongwith earth wire of size (4x 6.00) sq. mm + (1 x 6.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed.. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Bajaj plast/finolex.
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 1.50) sq. mm + (1 x 1.50) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed.. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Bajaj plast/finolex.NOTE : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 6.00) sq. mm + (1 x 6.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed.. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Bajaj plast/finolex..
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.00) sq. mm + (1 x 4.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed.. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Bajaj plast/finolex. NOTE for item No 39 to 42 : 1) Two/four runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately. 3) Cutting chases & making good, including necessary Putty work of the disturbed surfaces is deemed to be included in the unit quoted rates.
S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed.. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular Bell Push switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed.. Cat No : ACVSBXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular switch, one way, 16 Amp with indicator, 1 Module, 240 volt complete all as specified and as directed.. Cat No : ACVSXIW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed.. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed.. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed.. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed.. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 4 modules all as directed.. Cat No : ACTXMIIX04, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed.. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed.. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 4 modules all as directed.. Cat No : ACVPPCWV04, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor
S & F TV coaxial socket,1 module complete all as specified and as directed.. Cat No.-ACVKTOW001 Make : Legcus of Legrand or Verona of Crabtree(Havells) or Livia of Schneider
S & F internet socket RJ-45, suitable for CAT 6 cable, shielded, folded metal 1 module complete all as specified and as directed.. Cat. No. ACVKJWW451 Make : Legcus of Legrand or Verona of Crabtree(Havells) or Livia of SchneiderNOTE for Item Nos 10 to 22 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.
Supply and fix Coaxial TV cable, RG-6 with less signal losses all as per Cat No.WHOJTTKARG06 of Havells fixed with necessary accessories complete all as specified and as directed.
S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed.. Make: Havells/CG/Anchor
S&F in repairs call Bell, AC, Buzzer Ding Dong type 230 Volt.Make: Anchor, Code-8432 or techno-commercially equiv in Legrand/Havells
S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed. incl taking down old/unsv fittings. Make : Havells, Cat No:ENDURALINEARNEOBS10WLED865SPCSS or techno-commercially equiv In Jaguar/Philips
S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed. incl taking down old/unsv fittings. Make :Havells, Cat No:ENDURALINEARNEOBS20WLED865SPCSS or techno-commercially equiv In Jaguar/Philips
S & F ultra modern, Recess mounting, 48W, 6500K LED luminaire of size 2' x 2' suitable for ceiling complete with electronic driver & high brightness LED complete all as specified and as directed.. Make: LUKER, Cat No: LPS48 or techno-commercially equivalent in Philips/Havells
S&F ultra modern, Surface mounted, 18W, 6500K LED Elegant surface panel complete with electronic driver & high brightness LED of Make: Luker cat No: LNPSRR18 or techno-commercially equiv in Philips/Havells all as directed.
S & F ceiling/wall/panel mounted LED TRACKLIGHT (WHITE COLOUR) 12 W or next higher rating suitable for Track Channel 1/2 Mtrs span, CRI > 80, CT=6500 K ,twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed.. Make: Cat No LSPT12 of Luker or techno-commercially equivalent in Philips/Havells Note: Track channel of1/2 Mtrs shall be measured & paid separately under relevant items.
S & F ceiling/wall/panel mounted LED TRACK CHANNEL (WHITE COLOUR) 1 Mtrs length suitable for mounting of 03 Nos Tracklights 12 W, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed.. Make : Luker, Cat No : LTM1 or techno-commercially equivalent in Philips/Havells. Note: Track Lights 12 W shall be measured & paid separately under relevant items.
S&F decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with B22 with all accessories internally prewired and including necessary wiring/cabeling alterations of auto make the fitment completely capable for use as Engagement light & connecting up complete all as specified and as directed.. Make: Havells, Cat No:LHFOAJE2TZ1I060, Model - Florentine or techno-commercially equivalent in Philips/Jaguar
Supply and fixing in repairs LED Rojo lamps of rating 7W, red lamp with B-22 base cap all as directed. by the Engr-in- Charge Make : Havells,Cat No.-LHLDBWEB4P8R007(RED LAMP) or techno-commercially equivalent in Philips/Jaguar
Supply and fixing in repairs LED Rojo lamps of rating 7W, green with B-22 base cap all as directed. by the Engr-in- Charge Make : Havells,Cat No.-LHLDBWEB4O8R007(GREEN LAMP) or techno-commercially equivalent in Philips/Jaguar
S&F Indoor hanging light LED, decorative type including provision of cable 3 core of size 0.75 Sqmm complete all as specified and directed.. Make: Cat No LHL205E27 of Luker or techno commercially equivalent in Jaquar, Cat No.JNL-BRS-SLPEA020BE27
Supply and fixing in repairs LED lamps 23W, 6500K with E27 base cap all as directed. by the Engr-in-Charge Cat No: LHLDDDBC212R023 of Make Havells or techno-commercially equiv In Jaguar/Philips
S & F wall mounting decorative Picture light of rating 18W, 6500K warm white with aluminum die cast body and PC diffuser with all fixing arrangement forfixing above table and pictured complete all as specified and as directed.. Make: Luker, Cat No : LMCL 18 or techno-commercially equivalent in Philips/Havells. Imp Note for Item Nos 95 to 106 : 1) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.
S & F MCB, DB, TPN, 12 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed.. Make : L & T, Cat No : DBTPN012DD or techno-commercially equivalent in Siemens/Legrand.
S & F MCB, TP, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed.. Make : L & T, Cat No : AU10S30633C or techno-commercially equivalent in Siemens/Legrand.
S & F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed.. Make : L & T, Cat No : AU10S40633C or techno-commercially equivalent in Siemens/Legrand.
S & F MCB, TPN, 10KA, 415V, "C" curve, 100 A, ISI marked complete all as specified and as directed.. Make : L & T, Cat No : AU15S41003C or techno-commercially equivalent in Siemens/Legrand.
S & F SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed. by Engr-in-Charge.Make: L&T, Cat No: DBSPN012DD or techno-commercially equiv in Legrand/Siemens
S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed. by Engr-in-Charge.Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in Legrand/Siemens
S&F MCCB, 4 pole,63 A rating (Ics=100% of Icu),415Volts,36 KA Breaking capacity with adjustable overload & adjustable Short circuit setting complete all as specified & as directed. by the Engr-in-Charge.Make: L&T, Cat No CM97919OOH2OG or techno-commercially equiv in Legrand/ABB/Siemens.
S&F 4 Way,IP43,IK-09 Metal Double Door,TP&N vertical DB fitted with Busbar and blanking plates, Neutral link with 4 pole MCCB as Incomer and SP/TP MCBs as outgoings,without MCCB, flushing to wall/fixing inside enclosure and making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and directed. by Engr-in-Charge.Make: L&T, Cat No: DBVTL004DD or techno-commercially equiv in Legrand/ABB/Siemens. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.
S&F Miniature circuit Breakers, SPN,C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-AU10S20(06-32)3C or techno-commercially equivalent in Legrand/ABB/Siemens.
S&F Miniature circuit Breakers, SPN,C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-AU10S20403C or techno-commercially equivalent in Legrand/ABB/Siemens.
S&F Miniature circuit Breakers, SP,C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-AU10S10403C or techno-commercially equivalent in Legrand/ABB/Siemens.
S&F Miniature circuit Breakers, single pole,C-Series 240 Volts of capacity (6-32 Amps) as ordered with breaking capacity 10 KA. Make-L&T, Cat No-AU10S10(06-32)3C or techno-commercially equivalent in Legrand/ABB/Siemens.
S&F TP (6-Way) enclosure, IP-30 for independent mounting of MCB change-over switch (3M) fixed flush to wall/other surface complete all as specified and as directed.. Cat No DBENC006SD of make L&T or techno-commercially equivalent of LEGRAND/SIEMENS
S&F MCB FOUR Pole, two way with centre-off changeover switch suitable for 415 V AC of rating 63 A complete. Cat No AUC00206300 of make L&T or techno-commercially equivalent of LEGRAND/SIEMENS
Removing and Refixing of serviceable LED Hanging Light fitting incl connecting Accessories incl proper cleaning and making electrical connections complete all as directed.
S & F in repairs rigid non-metallic PVC conduits of external dia 25 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends with aluminium clamp, bolt, nuts etc for fixing complete all as specified and directed..Make:Precision/Finolex/Polycab
ACE PROMOTERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .