REPAIR MAINT TO VARIOUS BR NATURE COMPLAINTS LIKE TILING FALSE CEILING LEAKAGE ETC IN FMU VAJRABAHU FLEET SPORTS COMPLEX FLEET OFFICE FLEET MEDICAL CENTRE LWT CG COMPLEX AND ASSOCIATED AREAS AT ND MB UNDER AGE BR I UNDER GE NW KUNJALI

Amount

Dismantling plain or corrugated steel sheeting any guage, thickness, including Nainatal or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel works of any description work complete all as specified and directed.

Taking down cement plaster on brick / concrete surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar, including all quoins, arches, pillars complete all as specified and directed.

Taking down rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-neck,etc. (measured over all as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Taking down 25 mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

All as per item No 6 above but 40 mm bore GI Pipe complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ any thickness, including cover fillets complete all as specified and directed.

Disconnecting existing tanks, exc. 500 & n exc. 1000 liters capacity, setting aside (or lowering if required) for repair, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed..

All as per item 9 above but exc. 1000 & n exc. 2000 liter capacity.

All as per item 9 above but tanks 5000 liter capacity complete all as specified and directed..

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius and built in CM (1:6) complete all as specified and directed.

S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make : Everest or equivalent as approved by GE) complete all as specified and directed.

M&L for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable false ceiling complete all as specified and directed.

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) of Fe-410-W(Gde-E-250) quality-B including distance pieces, cleats etc.

S&F for rolled mild steel sections of Grade Fe 410-W, (Gde- E-250) quality-A, as in post, runners, rafters, purlins, steps etc fixed with connecting plates including bending, welding complete all as specified and directed.

S&F for mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting pletes, base plate etc. welding complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240. Structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed..

M&L for vitrified ceramic tiles 10 mm thick (square /rectangular ) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the dark shade of the tiles, with and including screed bed in CM 1:6, 20 mm complete all as specified and directed.

All as per item No. 21 above but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat complete all as specified and directed.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for Coloured glazed ceramic tiles in vertical surface 350X250X 7 mm/450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles complete all as specified and directed..

M & L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

S & F Powder coated aluminium frame for doors, windows ventilators and partitions with one or more rebates including joining cleat for fixing complete all as specified and directed.

M & L Sheet glass 4 mm thk, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane complete all as specified and directed.

M&L for aluminium anodized grill with suitable aluminium anodized frame of F/H section with suitable fixing screws/attachment etc complete all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill i.e. made out of 75mm thick aluminium plate all as per manufacturer's specifications complete all as specified and directed..

All as per item No. 28 above but plain sheets as in ridges / flashing complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L-type or J-type or cranked hook bolts in roofs, walls complete

S&F 15 mm bore dia of pipe, brass chromium plated fancy type bib tap fixed in repairs complete all as specified and directed.

S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends complete all as specified and directed.

S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F PVC Connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F brass chromium plated shower rose 125mm size, fixed in repairs complete all as specified and directed.

S&F 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets complete all as specified and directed.

S&F chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs complete all as specified and directed.

S&F Soap dish, vitreous china white, approximat size 160X160X90mm fixed in repairs complete all as specified and directed.

S & F white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc, fixed in repair complete all as specified complete all as specified and as directed.

S & F white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc, fixed in repair complete all as specified and directed.

S&F vitreous china WHB oval shaped fixed on countersunk stone slab platform including 15 mm dia x 600 flexible inlet pipe, 40 mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed to outlet pipe, coupling complete all as specified and directed.(Stone slab will be measured & paid seperatly)

S & F white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe complete all as specified and directed.

M&L for 1.5 mm thick galvanised steel sheet as in valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc. at any height including dismantling of old valley gutters complete all as specified and directed.

S&F 3 mm thick Aluminium composite panel cladding plain of approved colour/ shade to beam / column / slab in circular / rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & Aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm c/c on exceeding col/beam/ slab to hold APC cladding etc. (Note:- Colour / Pattern of ACP sheet shall be given by GE)

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, as roof kerbs / padding, using Pidiproof LW+ water proofing chemical of Dr. Fixit or equivalent as per manufacturer's instruction etc complete all as specified. (Water Proofing Chemical shall be measured and paid seperately).

M&L for the roof surface thoroughly wire brushed, washed and dried up and cleaned of all foreign matter and dust to receive bituminous primer, apply bituminous based cold applied primer @ 270 to 300 gms/Sqm manufactured by the same agency as that of APP all as per manufacturers instructions. Laying 5 layered, 4 mm thick APP (A tactic poly propylene) modified membrane reinforced with 180 GSM (Gms/Sqm) of non woven polyester mat, applied by thermo fusion using LPG torch on the bottom portion of the membrane with an overlap of 75mm in longitudinal direction. Add Note : Rates quoted shall be including disconnecting & refixing of existing AC outdoor units / lighting conductor / lighting arrester / or any other obstructing material etc if required as per site condition complete all as specified and directed.

M&L for cement concrete tiles 25CmX25CmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3 complete all as specified and directed..

10mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Krishnaconchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and as directed

M&L for roof treatment by application of two coats elastomeric coating of "TECH O THANE PU-White" @ 1.5Kg/SQM in CHOWKSEY CHEMICALS or NITOPROFF 600 PF @1.5KG/SQM in FOSROC or equivalent in IWL etc with DFT of minimum 1mm thickness on primed surface by using special grade of "Primer PR 71" in CHOWKSEY CHEMICALS or NITOPROFF Primer in FOSROC complete all as specified and directed. Note: 1.Rate should be inclusive of removing and refixing the lightening arrestor if existing. 2.Rate should be inclusive of removal and refixing PVC water tanks or shifting of any other thing as existing as per site condition

S&F 12mm thick, toughened glass for door shutters, partitions, sheves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots complete all as specified and directed.

M&LMaterial & labour for water proofing plaster for sunken portion in CM 1:3, 15 mm thick in two coats with integral water proofing compound at the rate of 3 % by weight of cement and finishing the surface even and smooth without using extra cement ccomplete all as specified and directed

Material and labour for water proofing treatment of sunken floor / wall surfaces by applying two coats of elastomeric coatings of BRUSHBOND RSX in FOSROC or TECKFORCE 2K STRONG in CHOWKSEY CHEMICALS as a two component flexible elastomeric coating with minimum 2mm thickness layer complete as per manufacturer’s instruction’s complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, supplying & fixing in opening as per specification.

S&F factory made solid PVC molded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 2mm thick molded PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specific.

S&F welded steel wire fabric, cut to length, fixed to steel members / reinforcement steel, weigh per Sqm not exc. 4 Kg complete all as specified and directed.

M & L for TMT mild steel bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0

All as per item No. 57 above but as in stirrups.

M&L for preparation of existing surfaces of roof top, RCC Gutter and parapet wall, crack filling with prime seal chemical and cement @ the ratio of 1:4, applying two coats of water proof chemical (Newcoat of dr. fixit or equivalent) and finally applying a coat of SBR latex and silicon powder paste not less than 2 mm thick complete all as specified and directed.

M&L for providing grouting 12 mm dia holes of 75mm deep @0.6 m c/c at junction of beams and columns as co-ordinal points for inserting/pouring mixture of Lw+, high proof chemicals and cement slurry by pressure grouting for column, beams and slabs, includind sealing the holes with CM 1:3,complete all as specified and directed.

M&L for micro concrete works in repairs of patches like edges, chajjas, lintels and other RCC members complete all as specified and directed.

Supply only polymer SBR Latex or equivalent as approved. Make:- Dr. Fosrok, Sunanda, Dr. Fixit complete all as specified and directed.

M&L for erection & dismantling of MS tubular double scaffolding (H frame) upto height of 30m & with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carrying out external face work of walls complete all as specified and directed.

S&F 160mm dia PVC (SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls with and including fixing clips, bends, elbow, shoes bends complete all as specified and directed. (Note:- Measurment shall be taken along the centre line of the pipes.)

S&F rotational moulded polyethylene water storage tanks of capacity 500ltr (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tanks and remove to store complete all as specified and directed.

All as per item 65 above but 1000 liter capacity.

All as per item 65 above but 2000 liter capacity.

S&F 25 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and directed.

As per item No 68 above but 40mm dia medium GI Pipe complete all as specified and directed..

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth finish complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & ceiling applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali primer complete all as specified and directed.

M&L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even and smooth finish complete all as specified and directed.

M&L for preparation of newly plastered surfaces in ceiling , applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment in ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for plastering in CM 1:4, 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) with water proofing compound at the rate of 2% by weight of cement and finishing the surface seven and fair complete all as specified and as directed. (WPC will be measured and paid seperately).

Supply only integral water proofing compound complete all as specified and directed..

M&L for preparation of newly plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction

M&L complete removal of existing plastered wall surfaces, over 10cm girth, preparation of surfaces, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.

M&L for preparation of old decorated wooden surfaces of any description over 10 cm width or girth, applying a coat of synthetic eanmel paint complete all as specified and directed..

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Removing excavated material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil complete all as specified and directed..

M &L Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust including taking down ceiling any sweep /size complete all as specified and directed.

S & F in replacement of plastic body capacitor of 2.5 mfd capacity suitable for single phase motor and making connection complete all as specified and directed. Make : Surya/Usha/TIBCON/Havells/Epcos.

Repairing of ceiling fan of any make, 1200 mm sweep dismantling its parts cleaning properly, rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing replacing petty items such as split pins, assembling and testing after fixing of fan blades, refixing at site and connecting complete all as specified and directed.

Supply and fix in repair Ball bearing suitable for 1200mm sweep ceiling fan of SKF or NBC or equivalent complete all as specified and directed.

Supply and fix in repair Ball bearing suitable for 1400mm sweep ceiling fan of SKF or NBC or equivalent complete all as specified and directed. .

Taking down Exhaust fan at any height,any size, sealing cable

M &L Painting of Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust complete all as specified and directed.

Repairing of Exhaust fans 300 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified and directed.

Repairing of Exhaust fans 380 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified and directed.

Repairing of Exhaust fans 450 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified.

Supply and fix in repair Ball bearing suitable for 300 mm sweep Exhaust fan of SKF or NBC or equivalent complete all as specified and directed. .

Supply and fix in repair Ball bearing suitable for 380 mm sweep Exhaust fan of SKF or NBC or equivalent.

Supply and fix in repair Ball bearing suitable for 450 mm sweep Exhaust fan of SKF or NBC or equivalent complete all as specified and directed. .

Taking down and repairing of Air Circulator fans 450 mm size and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & applying one coat grey enamel paint, assembling and refixing at site complete all as specified.

Taking down and repairing of Air Circulator fans 600 mm size and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, varnishing of winding, cleaning dust, rust & applying one coat grey enamel paint, assembling and refixing at site complete all as specified.

Taking down and repairing of wall fan of 400 mm sweep dismantling its parts cleaning properly rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing replacing petti items such as split pins, cleaning of fan body and its blade by cleaning agent assembling and testing after fixing of fan blades, refixing at site and connecting complete all as specified and directed.

M &L Painting of Air Circulator fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Supply & Fix metal louvers suitable for 300 mm Exhaust fan at any height complete all as specified and directed.

Supply & Fix in repair metal louvers suitable for 380 mm Exhaust fan at any height complete all as specified and directed.

Supply & Fix in repair metal louvers suitable for 450 mm Exhaust fan at any height complete all as specified and directed.

Supply & Fix and Replacement of 15 mm dia clamp assembly with nut bolts & rubber bush suitable for downrods and split pins complete all as specified and directed.

Supply & Fix and Replacement of 15 mm dia canopy suitable with fixing nut bolt complete all as specified and directed.

Supply & fixing ceiling fan down rod of length 300 mm inner diameter 15 mm and thicness not less than 1.5 mm with clamps nuts,bolts and washers for existing ceiling fan as approved by GE

Supply & fixing ceiling fan blade suitable to any size and make complete all as specified and directed.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces complete all as specified and directed.

Taking down old U/S tube light fittings single / Twin ,Recessis mount fitting , etc and making good the distrubed surface matching with existing surface complete all as specified and directed.

Taking down old u/s MCB DBs complete with MCBs, isolator etc of any type and capacity from wall/ceiling etc & making good to the disturb surfaces complete all as specified and directed.

M&L point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly complete all as specified and directed.

One light point controlled by one 5A switch

One Fan point controlled by one 5A switch

One 5A flush type switch socket point on same board board

One 5A flush type switch socket point on independent board

M&L point wiring complete with 4 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 4Sq. mm as earth continuity conductor connected to common earth dolly for15 amp swich socket on independant board complete all as specified and directed.

S & F in replacement of Switch piano flush type single pole one way ,5/6 Amps complete all as specified and directed.

Supply and fix switch sockets combination 5 pin 5 Amps flush type 240 Volts AC complete all as specified and directed.

Supply and fix in replacement switch socket combination multi purpose 3 pin 15 Amps controlled by one switch flush type 240 Volts AC complete.

S & F in replacement of fan regulator electronic step type socket size and making all necessary connections complete all as specified and directed.

S & F in replacement of bell, DINGDONG type, 6 Amps, 240 volts, SP complete all as specified and directed.

S & F in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 teRunning Metreinal, 240 volts, 5 Amps complete all as specified and directed.

S & F in replacement 20 Amps Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB.make -Legrand Cat part no -507814,siemens ,GE

S & F in replacement 63 Amps Triple pole and earth encolsure with a three pin and earth plug with socket complete with one single pole MCB.make -Legrand Cat part no -507864,siemens ,GE

S & F in replacement of MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and directed. Make- Legrand/Siemens/GE

S & F in replacement of MCB 0.5 to 4 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.Make- Legrand/Siemens/GE

S & F in replacement of MCB,SPN 40 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.Make-Legrand,siemens,GE

S & F in replacement of MCB,SPN 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.Make-Legrand,siemens,GE

S & F in replacement of MCB, 4 Pole, 63Amps capacity, C Curve type suitable for 415 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.make legrand Cat Part no-408702 Equivalent in Siemens,GE

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 607732 or equivalent in Siemens/GE (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 607731 or equivalent in siemens/GE (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 607730 or equivalent in siemens/GE (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting TPN 6 way, 440 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand Equivalent in siemens/GE (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S &F in Replacement of 120 WATT LED high/midbay:corvus series intergral industrial high power LED High/midbaywith pressuredie cast alluminium housing anodrisedaluminium reflector,complete with all acessories. make- C&S CAT PART NO- LTEHB120WHPLED/LS, OR Equivalent TO Havells, wipro,CG

S &F Ceiling light 36 WATT-2ft X 2 ft Recess mounting led ultra slimceiling light with extruded aluminium housing and milky diffuser.LED ultra slim panel:CYGNUS SERIES.make- C&S CAT PART NO-LTCRSLM36WATT2X2

S &F 20 Watt 4 FT LED tube light fitting integrated Batten T5: Nakshatra series indooor light decorative alluminiumextruded T5 LED Batten-integrated type. Make- C & S CAT PART NO LTTB4F20WLED/W,OR Equivalent TO Havells,wipro,CG

S &F 10 Watt 2FT LED tube light fitting integrated Batten T5: Nakshatra series indooor light decorative alluminium extruded T5 LED Batten-integrated type. Make- C & S CAT PART NO LTTB210WLED/W ,OR Equivalent TO Havells,wipro,CG

S &F Ceiling light 36 WATT-2ft X 2 ft SURFACE mounted backlit panel,cygnus-cs series surface mounting powder coated with CRCA full glow LED panel:CYGNUS- CS SERIES.make- C&S CAT PART NO-LTCSP36WLED2X2 , OR Equivalent to HAVELLs,wipro,CG

Supply & Fix LED Slim down light;CARINA SERIES CARINA-RND/6W/W LED 6 watt white LED Round Recess PDC Aluminium Housing Downlights,warm light all as specified directed.Make -C&S,cat part no-LTCRSM6HPLEDRND/W

Supply & Fix LED Slim down light;CARINA SERIES CARINA-SQ/6W/W LED 6 watt white LED Square Recess PDC Aluminium Housing Downlights,warm light all as specified directed.Make -C&S,cat part no-LTCRSLM6HPLED/SQ/W

M & L in repair Submain wiring with two run 4 Sqmm single core multistranded PVC insulated & unsheathed copper conductors 1100 volts FRLS grade ISI make drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc including one run PVC insulated & unsheathed multistranded copper conductor 4Sq. mm FRLS grade ISI make as earth continuity conductor connected to common earth as earth dolly

M & L Submain wiring with two run 6 Sqmm single core multistranded PVC insulated & unsheathed copper conductors 1100 volts FRLS grade ISI make drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc including one PVC insulated & unsheathed multistranded copper conductor 6.0 Sq. mm FRLS grade ISI make as earth continuity conductor connected to common earth as earth dolly

Supply & DLP PVC trunking system and accessories-trunking and fittings,Bodies supplied with out cover 105 x 50 mm all as sp`ecified and directed.cat part n0-010422

Supply & DLP PVC trunking system and accessories-trunking and fittings,Flexible cover fits into the whole branch including in internal or external angles supplied with Body cover 85 mm all as sp`ecified and directed.cat part n0-010522

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm as earthing lead a by nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion

Supply & Fix LED Light 25 watt : INDUS-E SERIES Power coated pressure die cast aluminium SMD LED with integraed lens complete all as specified directed.Make- C&S Cat part no- LTESSE25WLED,Bajaj,Havells

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25sq mm 3.5 core. laid in duct / along pole/wall tc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply & Fix LED RETROFIT LAMP: CHANDRA SERIES Product code CHANDRA/0.5W/R LTHPLED/0.5/R LED Retrofit Lamp B-22 holder base with poly carbonate diffuser and aluminium heat sink all as specified directed.Make -C&S,cat part no-LTHPLEDLAMP0.5W.B22/R

Supply & Fix LED RETROFIT LAMP: CHANDRA SERIES Product code CHANDRA/0.5W/R LTHPLED/0.5/G LED Retrofit Lamp B-22 holder base with poly carbonate diffuser and aluminium heat sink all as specified directed.Make -C&S,cat part no-LTHPLEDLAMP0.5W.B22/G

S & F exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

S & F Ceiling fan 5 Star Rated 1200 mm sweep heavy duty type complete with and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by completed all as specified and directed. Make: Havells/CG/ khaitan

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25sq mm 3.5 core. laid in duct / along pole/wall tc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

S &F in Replacement of 120 WATT LED high/midbay: corvus series intergral industrial high power LED High /midbaywith pressuredie cast alluminium housing anodrisedaluminium reflector,complete with all acessories. make-C&S CAT PART NO-LTEHB120WHPLED/LS,OR Equivalent TO Havells, wipro,CG

Garima Construction Co

M/s S.D Construction Co

Shree Ayyappa Engineering

RAMESH ENTERPRISES