CERTAIN REPAIRS TO JOINERIES INCL ALUMINIUM WORK, PANELLING, CEILING, PLINTH PROTECTION, ROOFING, RENOVATION OF TOILET/BATHROOM/KITCHEN, SANITARY,PLUMBING AND ALLIED WORKS LOCATED AT ZONE D AREA OF AGE B/R-I UNDER GE (EAST) LUCKNOW

Amount

Demolition of plain cement concrete of any description and in any position complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete complete all as specified and directed

Taking down chowkhat or frame with shutters area not exc 1.5 sqm each (without taking off the shutters from the frame) including iron mongrey and cutting holes for hold fasts & making good complete all as specified and directed

Taking down chowkhat or frame with shutters area exc 1.5 sqm but not exc 4 sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified and directed

Taking down shutters area exc 1 sqm but not exc 2 sqm each complete all as specified and directed

Taking down shutter of any description area exc 1 sqm but not exc 2 sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints, hacking for key,scrubbing down with water etc complete all as specified and directed

Dismantling AC sheet (Corrugated, Semi Corrugated etc) as in roofs etc including ridges complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar complete all as specified and directed

Dismantling of boarding of any description fixed in any position with nails complete all as specified and directed

Dismantling of water tank of capacity exc 250 and not exc 500 ltr capacity and removing to store complete all as specified and directed

Dismantling water tank of capacity exc 500 and not exc 1000 ltr capacity and removing to store complete all as specified and directed

Dismantling water tank of capacity exc 1000 and not exc 2000 ltr capacity and removing to store complete all as specified and directed

S&F for 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

S&F for 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

S&F for 2000 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

M&L for 25mm thick providing precast cement concrete jallies, PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) including all moulding but excluding frame and set in C:M 1:6 complete all as specified and directed

M&L for 20 mm thick granite (of any type and colour) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified and directed

M&L for 20-25mm thick machine cut kota stone slab flooring over cement screed bed 15mm thick in CM 1:6, base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

S&F exterior tiles of superior qulaity 300x300/400mmx400mm x 10-12mm thick of approved size/design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed

M&L glazed ceramic tiles in vertical surfaces 300x200x7mm /600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick(square/ rectanglar) area of each tiles exc 0.11 sqm but not exc 0.18 sqm in floor including screed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

S&F vitrified ceramic digital tiles of dark/light shade /(double charged), 10mm thick (square/ rectanglar) polished, area of each tiles not exc 0.36 sqm, in floors etc. laid over 15mm thick screed bed 1:4, set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed

S&F in repair 60 mm thick M-35 grade ISI Marked, Machine pressed concrete rubber moulded interlocking coloured paver block of any shape and size with grey cement and pigment overand including 25 mm thick sand cushion complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail , lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6.00 meter mean radius, built in cement mortar 1:6 complete all as specified and directed

M&L for brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed

M&L for 10mm thick rendering in CM 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 with on fair surfaces of walls finished even and smooth without using extra cement complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed

M&L for preparation of new plastered surface of wall and applying three coats of white wash on wall complete all as specified and directed

M&L for preparation of new or previously undercoated surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed

M&L for preparation of new plastered surface of wall and applying two coats of OBD over a coat of primer on wall complete all as specified and directed

M&L for preparation of old plastered surface of wall and applying one coat of white wash on wall complete all as specified and directed

M&L for preparation of old surface of ceiling and applying one coat of white wash complete all as specified and directed

M&L for preparation of old surfaces of wall & applying one coat of cement base paint of approved shade/tint complete all as specified and directed

M&L for preparation of old surface of wall and applying one coat of OBD complete all as specified and directed

S&F glass dividing strips 3mm thick and 38mm wide & fixed in position complete all as specified and directed

M&L for 25mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) with concrete surface even and smooth with using extra cement as in flooring, complete all as specified & directed.

M&L for 40mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed

M&L for cement concrete 1:3:6, type C-2 , 75 mm thick as in plinth protection and flooring and finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L for 2nd class hard wood, wooden beading, plain fillets, square or rectangular or triangular in section clean sawn sectional area exc 3 sqcm but not exc 6 sqcm fixed with nail complete all as specified and directed

S&F of second class hardwood plain, solid, straight chowkhats or frames of , wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed.

S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkhat, complete all as specified & directed

S&F 30mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in clause 8.24 (b) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkhat, complete all as specified & directed

S&F for 35mm thick factory made plain framed panelled shutters with lock rail and 2nd class hard wood rail and style and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces 2 complete all as specified and directed

S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified and directed

S&F butt hinges of size 75mm medium weight, stainless steel marked complete all as specified and directed

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed

S&F 125mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S&F 150 mm size aluminium alloy handles, fabricated type, extruded section complete all as specified and directed

S&F 100 mm size aluminium alloy handles, fabricated type, extruded section complete all as specified and directed

S&F in repair aluminium extruded section body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover filltets complete all as specified and directed

Providing and fixing of E-board of 600 x 600 x 4mm thick white prelaminated set embosed reinforced desigener at all height laid on Hot dipped Galvanised imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work will comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc. complete all as specified and directed

S&F in repair floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed

S&F anodised aluminium grill (opening of grill not more than 100x100mm) fixed to windows or ventilators with anodised aluminium U channel 25x12mm size complete all as specified and directed

S&F powder coated aluminium anodised frame/chowkhat of aluminium door fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and directed

Providing and fixing powder coated/aluminium partly glazed and partly panelled door shutter side hung type using 1.50mm thick standard door section having size of styles, top rails 83x44mm where as bottom rails will be made up of 100x44mm including necessary joining cleats ,glazing clips, rubber packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 100mm long 3 No. aluminium hinges B-21 ,type 01 No. aluminium tower bolt 200mm long and one no mortise lock 100mm size 4 levers (vertical type) and 01 No 300mm size long aluminium sliding bolt and 02 No fancy type fiber glass 150mm dia circular handle shall be provided to each door and glazing of top panel shall be made of 5.50 mm thick sheet glass and panelling shall be provided with 12mm thick exterior grade pre laiminated partical board with both side choice laminations complete all as specified and directed

M&L in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as specified and directed

S&F for 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc and fixed with ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified and directed

M&L for 6 mm thick asbestos cement two piece adjustable plain wing ridge for corrugated or semi corrugated sheets fixed with ‘L’ type or 'J' type or cranked hook bolt complete all as specified and directed

S&F powder coated aluminium glazed window shutter including frame sliding type using 1.30 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rils 100x44mm including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and glazing shall be done by using 5mm thick plain sheet glass and steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed

S&F in repair 20 mm dia mild steel PVC Coated fancy type curtain rod including fancy knobs and bracket complete all as specified and directed.

S&F for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coatch screw and washer in roof, wall etc, complete all as specified and directed

S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed

Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing of capacity exc 250 not exc 500 ltr complete all as specified and directed

Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing of capacity exc 500 not exc 1000 ltr complete all as specified and directed

M&L in repair 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified and directed

Taking up or down steel water tubing and connections of 15mm bore including cleaning for refixing or removal to store , fixed in walls, ceiling, floors, trenches etc and M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

Taking up or down steel water tubing and connections of 20mm bore, fixed including cleaning to refixing or removl to store in walls, ceiling, floors, trenches etc and M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

S&F in repair stainless kitchen plate rack made of 0.80mm thick sheet of size 900x1200 mm and fixed to wall complete all as specified and directed

S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed

S&F in repair vitreous china wash hand basin, white, flat back of size 550x400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed

S&F in repair vitreous china wash hand basin, 600x480mm counter top oval shape cascade pattern with pillar tap cast copper alloy ,CP capstan head ,PVC connection,CP bottle trap, PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end complete all as specified and directed

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe ). and trap including connection to drain (or out going pipe) and to flushing pipe anti sphonage pipe etc complete including flush pipes and all joints complete all as specified and directed

S&F kitchen sink made of stainless steel 1mm thick with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B-0 and including taking down old unserviceable sink complete all as specified and directed

S&F kitchen sink with drainage board made of stainless steel 1mm for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brakkets, bedding in cement mortar on to dwarf wall, conntecting union to pipe, overall mimimum size 915mmx460mm with bowl size 410mmx330mmx160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waster fitting with long screwed shanks and fly nuts, flage end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B-0 and including taking down old unserviceable sink complete all as specified and directed

S&F in repair vitreous china coupled WC, (wall hung or floor hung) with coupled closed bowl-WC P or S type with seat cover, hinges accessories set, cistern complete all as specified and directed.

S&F in repair plastic water closet seat cover coloured/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S&F in repair 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan complete all as specified and directed

S&F in repair vitreous china urinal half stall type white excluding flushing cistern, flush pipe and waste pipe complete all as specified and directed

S&F in repair brass chromium plated wall mixer for mixing hot & cold water in 3-in-1 with telephonic hand shower and 1.50m long flexible lead & screwed down for iron pipe of 15mm bore complete all as specified and directed

S&F in repair PVC connection of 15 mm bore 600 mm long PTMT nuts with brass coupling on both ends of superior quality complete all as specified and directed

S&F in repair PVC cabinet with mirror and door of size 560X410mm complete all as specified and directed

S&F brass chromium plated single hole basin mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality complete all as specified and directed

S&F in repair CP angle valve for 15 mm bore pipe fixed complete all as specified and directed

S&F in repair 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions complete all as specified and directed

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore complete all as specified and directed

S&F in repair CP brass toilet paper holder fixed to wall with chromium plated brass screws of approved quality complete all as specified and directed

S&F in repair 125 mm dia CP brass shower rose with or without swivel joints any size including fixing to steel pipe or union add complete all as specified and directed

S&F in repair fancy type brass pegs ,set of 6 complete all as specified and directed

S&F in repairCP brass towel rails 20 mm dia and 600 mm long fixed including chromium plated brass screw and wooden/cleats complete all as specified and directed

S&F in repair health faucet for EWC CP hand hold with flexible pipe 1.5m long complete set complete all as specified and directed

S&F in repair symphonic action type single/twin type flushing cistern kit any size and any type complete all as specified and directed

S&F in repair 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner complete all as specified and directed

S&F in repair glass corner shelf assembly consisting of 5.5mm thick sheet glass 250X250mm size fixed with chromium plated brackets complete all as specified and directed

S&F in repair glass shelf assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and directed

S&F in repair mild steel helical door spring 150mm ordinary rat tail rod pattern spring including roller and roller plate including welding if required complete all as specified and directed

S&F in repair cast iron floor trap with gratings including jointing to waste pipe in run lead 75/100 mm out let complete all as specified and directed

Repair to steel window, repair/replacement of hinges, window stay, handles etc. welding of hinges complete all as specified and directed

S&F in repair ball valves of 25 mm dia high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball Screwed for iron pipe and fixed (Minimum weight 25mm-455 gms) complete all as specified and directed

S&F in repair ball valves of 20 mm dia high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball Screwed for iron pipe and fixed (Minimum weight 20 mm -210 gms) complete all as specified and directed

S&F in repair ball valves of 15 mm dia high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight 15mm -142 gms) complete all as specified and directed

S&F in repair brass spindle of any size for bib taps/pillar taps/stop cock etc complete all as specified and directed

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall complete all as specified and directed

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall complete all as specified and directed

S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and directed

S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apeerture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed

S&F in repair hinges for modular kitchen shutter for any degree complete all as specified and directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed

S&F 4.8mm thick sheet glass ordinary quality and glazing with oil putty/aluminium beads in square exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces ground or obsecured to one side complete all as specified and directed

M&L for preparation of new/old surface of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed

S&F framed work as in doors or gates of angle or other section with gussset plates, rails, braces etc complete drilled for fixing steel sheetings or other coverings. Doors etc to be prepared for hanging or sliding with and including either hooks or hinges steel hanging door fittings ( exclusive of steel sheeting or other coverings running rails and guides) and hanging also fastening and fixing complete quality conforming to Fe-290W (Gde E-265) quality B complete all as specified and directed

S&F mild steel rolled/tubular sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters, fixed with angle cleats or other connecting plates etc. conforming to Grade Fe 410W(Gde E-265 quality `B’ complete all as specified and directed

S&F in repair viterious china coloured WHB 600 x 480 counter top oval shape cascade pattern with pillar taps cast copper alloy capstan heads CP PVC connection, CP bottle trap and CP waste coupling of 32mm dia in lead to waste pipe complete all as specified and directed

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified and directed

S&F in repair fancy type pillar taps 15 mm cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered (hot or cold) with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed

M&L for mild steel work as in hold fasts, bands, plain angle cleats, clamps, hooks, straps, stay for rain water pipe, pintle hinge, large hasp and staple, clamps conforming to Fe 290 or Fe 310 complete all as specified and directed

S&F steel windows with side hung with box type hinges including peg stay, lugs handle and with glazing bar dovetailed or welded complete including one coat of red oxide primer complete all as specified and directed.

S&F steel ventilator partly fixed and party top hung/side hung with box type hinge including peg stay, lugs handle and glazing bar complete including one coat of red oxide primer complete all as specified and directed.

M&L mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending and binding with mild steel wire (annealed ) not less than 0.9 dia off confirming to grade Fe 310 complete all as specified and directed

Demolition of reinforced cement concrete works of any description and in any position not otherwise specifically provided complete all as specified and directed

M&L RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in parapet wall, cover slab of main holes, drain and similar article with set in cement mortar 1:4 complete all as specified and directed

S&F in repair stainless steel drapery curtain rods 25mm dia standard quality with fancy type stainless steel latoo at both ends and stainless steel bracket for middle support as required complete all as specified and directed

M&L for providing cement concrete , type B-0 1:2:4 (12.5 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges or coping complete all as specified and directed

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforescent salts, trading oil, greasy sopts etc and preparation of plastered surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including white wall care putty 1mm thick on walls complete all as specified and directed

S&F in repair soap dish CP fixed with and including chromium plated brass screw complete all as specified and directed

S&F in repair 100 mm size PVC handle for cabinet shutter complete all as specified and directed

S&F in repair magnet catcher for cup board shutter complete all as specified and directed

S&F for 5mm thick Polycarbonate corrugated sheeting with two corrugation side lap fixed with coach screw and washer fixed with L type or J type of hooks complete all as specified and directed

Taking out existing aluminium frame with shutter and repair of all necessary items i.e hinge aluminium snap beading, rubber packing, glazing clip, door closer screw etc. ,any type of repair and making good disturbed portion of wall/floor including refixing the same complete all as specified and directed.

S&F in repair CP concealed stop cock for 15 mm bore pipe fixed complete all as specified and directed

S&F in repair steel rolling shutter 1.25 mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one coat of primer, erected in position as indicated, complete all as specified and directed

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed

S&F ball bearing for rolling shutters complete all as specified and directed

Supply only lock plate made out of angle iron 35x5mm and MS block sheet 12 gauge including hand made handle, locking arrangement etc complete of required size, complete all as specified and directed

S&F 18mm thick solid PVC board one side prelaminated decoratiove teak face and other side white and balancing as in kitchen shelf, shutters etc including chawkhats and all fitting accessories etc including dismantling of old boarding complete all as specified and directed

S&F in repair CP grating doom 125mm dia complete all as specified and directed

S&F in repair 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified and directed

Supply only integral water proofing compound, ISI Marked complete all as specified and directed

M&L for applying two layer pedicrete mixed with cement on brick/ concrete/ plastered surfaces of roofs/walls as per manufacturer's instructions complete all as specified and directed. (Note:- Quantity of cement and water shall be as per manufacturer's instructions)

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, complete all as specified and directed

S&F in repair brass spindles for fittingsof bib taps/stop cock/angle valve/mixers/basin mixture etc complete all as specified and directed

S&F GI frame for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling made out of180cmx120cmx1.2cm thick and 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long complete all as specified including 10mm thick POP (Gypsom anhydrous) to flat surface over metal frame work and reinforced with GI wire mesh ,at different height or level including two coat plastic emulsion paint over required thickness of putty complete all as specified and directed

S&F 100x150 mm wide POP moulded/cornices in required pattern/design as in ceiling complete all as specified and directed

M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed

S&F for 5mm thick PVC sheet fillet with 35mm thick for wall panelling inclusive of fixing on to wall make PVC frame as per specification and drawing complete all as specified and directed.

M&L for antitermite treatment at contact of wood work along internal by chemical emulsion @ 2.25 litre/sqm including drilling & plugging hole etc complete all as per specified.

M&L 2nd class hardwood plain fillets exc 13 but not exc 25 sqcm in sectional area square /rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed

M&L 12 mm thick plywood grade BWR type BB, fixed with screw to timber frame workblock board grade 2 quality interior grade having both sides commercial faces fixed with screws to timber frame work complete all as specified and directed

M&L 6 mm thick veneered decorative plywood grade1 (with BWR resin) with decorative face veneers on one face fixed with screw to timber frame work complete all as specified and directed

M&L two coats of melamine wood polish on new /old wooden wall surfface/wood based material including removing/cleaning and prepration of the surface including a coat of wood filler complete all as specified and directed

HS ASSOCIATES

ANIL CONSTRUCTION

Ajay Sahu & Sons

m/s raghubar dayal

M/S S S A ASSOCIATES

M/s R.K.Traders

Gaurav Enterprises

QUALITY CONSTRUCTIONS CO

M/s Durga Construction Company

M/S KAUSHIK CONSTRUCTION