Construction of Simulation Lab at 2nd floor Block 5th of Main College Building of Government Medical College Doda (Ghat).

Amount

Providing and laying in position machine· batched, machine mixed and machine vibrated -design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 91 03) to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge-M-20 grade reinforced cement concrete. Walls, columns, pillars, posts and struts. (including all leads, lifts and carriages)

Add or deduct for providing richer or leaner mixes respectively at all floor levels for Providing M-25 grade R.C.C. instead of M-20 grade R.C.C.

Add or deduct for providing richer or leaner mixes respectively at all floor levels for Providing M-35 grade R.C.C. instead of M-20 grade R.C.C.

Centring and shuttermg including strutting, propping etc. and removal of form for· (including all leads, lifts and carriages)

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and centilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts

Edges of slabs and breaks in floors and walls. Under 20cms wide

Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards.

Extra for shuttering in circular work (20% o f respective centring and shuttering items)

Extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc including cost of de-shuttering and decentring at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors. roofs, landing, beams and balconies (Plan area to be measured).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. (including all leads, lifts and carriages)

Providing and fixing upto floor five level precast cement concrete hollow blocks including hoisting and setting in position with cement mortar 1:3 (1 cement: 3 coarse sand), cost of required centring, shuttering complete 1:3:6 (1 cement: 3 coarse sand · 6 graded stone aggregate 20mm nom1nal s1ze ) Crushed (including all leads, lifts and carriages)

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed (including all leads, lifts and carriages)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) Polyester powder coated aluminium (minimum thickness of polyester powder coated 50 microns) (including all leads, lifts and carriages)

For shutters of doors, windows & ventilators including providing and fixing hinges I ivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron ) 1.63 mm aluminium section including all fittings / accessories. (including all leads, lifts and carriages)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture including providing and fixing top and bottom pivot and spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (door handle, lock and stopper etc. to be paid saperately).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 8 mm thickness (weight not less than 20.0 kg I sqm)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo em,possed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot" and single piece M.S. sheet outer box with slide plate etc. complet~ as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness. (including all leads, lifts and carriages)

Providing and fixing tiled False Ceiling of approved materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanised @ 120 gms/sqm both side inclusive ) consisting of main 'T' runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross 'T' of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm cente to centre to form a grid of 1200 x 600mm and secondary cross "T" of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, herever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using Gl slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm Gl adjustable rods with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineerin-charge. (The rate is excluding the cost oftiles which will be paid for separately). Gl Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 1 00 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm (including all leads, lifts and carriages)

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) (including all leads, lifts and carriages)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 litre/1 Osqm over and including base coat of water proofing cement paint applied@ 2.20kg/1 Osqm)

Electrification Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sqm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/ PVC conduit as required.

Wiring for light/ power plug with 2x4 sqm FRLS PVC insulated copper conductor single core cable in existing surface / recessed medium class PVC conduit alongwith 1 No. 4 sqm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed medium class PVC conduit as required.

2 x 1.5 sqm + 1x 1.5 sqm earth wire

2 x 2.5 sqm + 1x 2.5 sqm earth wire

2 x 6 sqm + 1x 6 sqm earth wire

4 x 10 sqm + 2 x 6 sqm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recessed including cutting the wall & making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing 5 A to 32 A rating, 240/ 415 V, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Single pole 10 / 16 / 32 amp.

Supplying and fixing of following modular type switch / socket on the existing switch box cover including connections etc as required.

5 / 6 switch

3 pin 5 / 6 socket outlet

15 / 16 switch

6 pin 15 / 16 a socket outlet

Telephone socket outlet

Supplying and fixing of two module stepped type electronic fan regulator on the existing modular plate witch box including connections but excluding modular plate etc as required.

Supplying and fixing of modular blanking plate on the existing modular plate and switch box excluding mofular plate as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the edisting surface / recessed steel / PVC conduit as required. 2 pair

Providing and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including onnections, painting etc as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required ( But without MCB/RCCB/Isolator)

8 way (4 + 24), Double door.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc as required.

1 or 2 module

3 module

4 module

6 module

8 module

12 module

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc with charcoal / coke and salt as required.

Providing and fixing of 25 mm x 3 mm copper strip in 40 mm dia G.I pipe from earth wlectrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc as required.

Providing and fixing of 25 mm x 3 mm copper strip on surface or in recess for connections etc as required.

Supplying and fixing of 34 / 36 watt 600 mm x 600 mm LED Panel light recessed type.

Supplying and fixing of 20 / 22 watt LED 4 feet tube light fitting / fixture CRCA housing with 2000 Lumens and min lumens efficiency 100 Lumens / watt P.F 70.95 THD 16% & voltage input range 140-270 V with shot circuit & overloading protection circuit off.

Supplying and fixing of 15 watt LED down lighter surface / recessed as required.

Supplying and fixing of angle / baten holder with 9 watt LED Lamp polycarbonate including making complete connections etc as required.

Supplying and fixing of following electrical items suitable for operating on 240 / 230 volts AC, 50 Hz supply including connections etc as required.

Ceiling fan 1200 mm sweep along with rod up-to 1'6" long fan rod.

Exhaust fan 300 mm size

Supplying and fixing of ( 90 + 5) watt LED type street light fitting complete with suitable size G.I pipe bracket duly embedded / fixed in wall / along parapet including complete connections etc as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required

Supply and fixing of cat 6 cable

BRE Global certified 2c x 1.5 sq.mm Fire Survival armoured cable with Class-2 Copper conductor as per BS EN 60228, twisted, with Mineral ceramic glass fire barrier tape covered by an extruded layer of Cross-linkable Low smoke zero halogen (LSZH) insulation as per BS EN 50363 and LSZH inner & outer sheath as per BS : 7846 should retain circuit integrity as per clause 26.2e of BS: 5839-9 BRE Global & LPCB-FPC certificates to be provide outer sheath sould be Anti-Rodent.

Supply, fixing, testing & commisssioning of Modular RJ-45 with data outlet socket with grid & cover plate in suitable size of 16 SWG GI box.

Supply & installation of Cat 6 UTP XL Keystone connector

Supply and installation of dual port face plate. 1. Modular single gang square. 2. Screw hole coers. 3. Should be able to support variety of jacks-UTP,ScTP,FTP ETC. 4. Should facilitate entry for shuttered jacks / information outlets. 5. Two modules or a single module and a blank may be installed in this format. 6. All outlets shall have facilities for labelling on either the face plate or module. This should be protected by means of clear plastic window.

Supply and installation of Metal Flush Box - 1/2 module

Sanitary fixtures and internal drainage Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings size 600x450x200 mm

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing unplastised P.V.C. connection pipe with PTMT Nuts of approved quality, colour 15 mm nominal bore with 45 em length.

Suppling and fixing turn buckles and straining bolts for barbed wire fencing..

Providing and fixing Accoustic Home techinque-PP/Polypropylene piping (PP) piping system with built-in SOCKET pipe in 3 layer made of PP-H (Grey)/ PP-C (Blue/ Ral) outer layer + foam (PP-H), white /PP-C (Blue/Ral), pucsh-fit type, food safe, having moderate impact and stiffness, density of pipe not above 1.35 gms/cm3 and not below 0.75 gms/ cm3, elongation not less than 0.05 mm/m K and not more than 0.15 mm/ mK, chemical resistance as per ISO/TR 10358, the system should be workable from 1 degree to + 90 degree C(short term fitted with factory fitted lip ring including painting for external installation. Connection with mugs and gasket made of EPDM or rubber (EN 681) 9supporting standard as per EN 1451)- Noise level equal to or less than 22d BA @ 2lps as per VDI 4100 and 25dBA as per EN14366/DIN 4109 with BISMAT 2000 clamps as per Fraunhofer certification. 110 mm dia

Providing and fixing Accoustic Home techinque-PP/Polypropylene piping (PP) piping system with built-in SOCKET pipe in 3 layer made of PP-H (Grey)/ PP-C (Blue/ Ral) outer layer + foam (PP-H), white /PP-C (Blue/Ral), pucsh-fit type, food safe, having moderate impact and stiffness, density of pipe not above 1.35 gms/cm3 and not below 0.75 gms/ cm3, elongation not less than 0.05 mm/m K and not more than 0.15 mm/ mK, chemical resistance as per ISO/TR 10358, the system should be workable from 1 degree to + 90 degree C(short term fitted with factory fitted lip ring including painting for external installation. Connection with mugs and gasket made of EPDM or rubber (EN 681) 9supporting standard as per EN 1451)- Noise level equal to or less than 22d BA @ 2lps as per VDI 4100 and 25dBA as per EN14366/DIN 4109 with BISMAT 2000 clamps as per Fraunhofer certification. (For indirect waste / wash Basin / urinal/ sink/ floor drain) Make poloplast / rehau / pestan) 40 mm (OD)

Providing and fixing uPVC Trap with minimum 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connections. (Make - Supreme/ finolex/ AKG ) 110 mm inlet & 110 mm outlet.

Providing, fixing, testing and commissionong of pipe inlet fittings fabricated with poloplast/ UPVC pipe with maximum 3 inlets 40, 50 & 70 mm OD size po;oplast pipe, fixed to 'P' traps including Dripseal/Pipe seal/solvent weld joint/ rubber ring joint complete (Make Poloplast / Viega / Mcalpine/ Pestan)

Providing and fixing stainless steel grating with rim of approaved design including setting in floor with cement mortar. (For floor trap/ floor drain) (Make- Neco / neer) 125 mm x 125 mm

Water supply internal and external Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: INTERNAL WORK-Exposed on wall

15 mm dia. nominal bore (Medium)

20 mm dia. nominal bore (Medium)

25 mm dia. nominal bore (Medium)

Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall (Make - aas per local approved manufacturer)

15 mm dia. nominal bore

20 mm dia. nominal bore

Painting G.I pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : (Make - As per approved local manufcturer)

15 mm diameter pipe

20 mm diameter pipe

25 mm diameter pipe

Providing and fixing Thermoflex or Careflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. (Make - Kaiflex/ Careflex / Armaflex) 9 mm thick (Pipes in Chases)

15 mm dia pipe

20 mm dia pipe

Providing and fixing of full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tasted to a pressure not less than 15 kg/ sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc (Make - Castle/ AIP / Zoloto)

15 mm dia

20 mm dia

25 mm dia

Note: - The list of approved makes of manufacture for different material to be used in the execution of electrical related works falling under the jurisdiction of PWD (R&B) Electric Division Jammu is attached as Annexure-A (04 Leaves) to this BOQ

R.B.Chopra Freighters Pvt. Ltd.

Kamalashi Constructions and Engineers Pvt Ltd