Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.1 LAccepted-AOC | 1 | Accepted-AOC Being L1 for Some Items | |
| 2 | 1₹3.8 LAccepted-AOC | 1 | Accepted-AOC Being L1 for Some Items | |
| 3 | 1₹13.6 LAccepted-AOC 03 SHRI KRISHNA APARTMENT BHUSAWAL BHUSAWAL JALGAON MAHARASHTRA 425201 | JALGAON | MAHARASHTRA | 425201 | 1 | Accepted-AOC Being L1 for Some Items | |
| 4 | 1₹19.7 LAccepted-AOC 214 215 NEELKANTH CORPORATE PARK NEAR VIDYAVIHAR STATION VIDYAVIHAR WEST MUMBAI MAHARASHTRA 400086 | MUMBAI SUBURBAN | MAHARASHTRA | 400086 | 1 | Accepted-AOC Being L1 for Some Items | |
| 5 | Rejected-Technical PLOT NO 66 67 BAKROL INDOR HIGHWAY NR SWADHIN INDUSTRIAL PARK VILLAGE KUHA TALUKA DASKROI VILLAGE TOWN OPP K P KANTA CITY AHMEDABAD | - | Rejected-Technical Does not match technical specification |
Tender Value
Refer Docs
EMD Value
₹2 L
Closing Date
14 Jun 2025, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Medical Superintendent
MS Cabin 4th Floor MH-ESIS Hospital Kandivali
Supply of Orthopedic Implants and Prosthesis
2025_ESIS_1186642_1
338
Open Tender
Surgicals and Sutures
Item Wise
2 days
MH-ESIS Hospital Kandivali
Please Refer Tender Document
4 documents required · 4 mandatory
₹3,000
₹2 L
MS Cabin 4th Floor MH-ESIS Hospital Kandivali
28 Jul 2025
4 Jun 2025
16 Jun 2025
4 Jun 2025
14 Jun 2025
4 Jun 2025
4 Jun 2025 - 5 Jun 2025
5 Jun 2025
Titanium Rates
Titanium / LVM FEMUR FRACTURE SET including any of the below mentioned implants along with compatible screws/bolts/blade of variable lengths and diameter
PFN-A (Proximal Femoral Nail) , Length: 180 mm and 240 mm (Diameter 9, 10, 11, 12 ,13 mm) , Length: 320 mm to 460 mm (with 20 mm variation) - Diameter: 9, 10, 11, 12 mm
Femur Interlocking nail / Trochanteric Femur Nail Length: 320 mm to 460 mm (with 20 mm variation) Diameter: 9, 10, 11, 12 mm (Both Right and Left side)
Dynamic Hip Screw (DHS) Angle: 130 and 135 degree (3-6 holes each) Screw size – 8 mm (50 to 120mm with 5 mm variation)
DFN (Distal Femoral Nail) Length: 160 mm to 440 mm (with 20 mm variation) Diameter: 9, 10, 11, 12, 13mm
Proximal Femur Locking plate 5 mm (4 to 12 holes with 2 mm variation)
Distal femur osteotomy plate (Medial and Lateral) 4.5 mm (2 to 5 holes) (both medial and lateral)
Distal femur Locking Plate (Medial and Lateral) Lateral Plate: 4.5/5mm (5 to 15 holes with 2-hole variation)
Titanium/LVM TIBIA and FIBULA FRACTURE SET including any of the below mentioned implants along with compatible screws/bolts/blade of variable lengths and diameter
Tibia interlocking nail including Expert and Tip Locking nail Length: 260 mm to 400 mm (With 20 mm variation) Diameter: 8, 9, 10, 11 mm
Proximal tibia variable angle 3.5 mm locking plates (Medial, Raft, Lateral, Posteromedial) Lateral – 3.5 mm: 6 to 16 holes (2-hole variation) Medial – 3.5 mm: 4 to 16 holes (2-hole variation)
Distal tibia variable angle Locking plates (Medial, Anterolateral, Posterior) Medial - 3.5mm:4 to 14 holes (2-hole variation) Anterolateral – 3.5mm: 5 to 21 holes (2-hole variation)
Anatomical variable angle Distal fibula plate 3.5 mm: 3 to 11 holes (2-hole variation)
Reconstruction (RECON) plates 3.5mm (5 to 12 holes with 1-hole variation, 12 to 22 holes with 2-hole variation)
1/3 rd Tubular plates / Semi tubular plates 3.5 mm (4 to 12 holes with 1-hole variation)
Posterior malleolar variable angle plates 3.5 mm (3 to 5 holes)
Rush nails Length: 140 to 400mm Diameter: 1.5, 1.8, 2, 2.5, 3, 3.5, 4, 4.5 mm
High Tibial Osteotomy plates 3.5 mm (2 to 5 holes)
Titanium/LVM HUMERUS FRACTURE SET including any of the below mentioned implants along with compatible screws/bolts/blade of variable lengths and diameter
Variable angle PHILOS plate (Proximal humerus plates) 3.5 mm (3 to 8 holes)
Humerus nail (Multilocked and Simple; Solid and cannulated) Length: 180 to 300 mm (10 mm variation)Diameter: 6, 6.5, 7, 7.5, 8 mm
4.5mm narrow and broad Locking compression plate (LCDCP) 4.5 mm (5 to 16 holes with 1-hole variation, 16 to 24 holes with 2-hole variation)
Distal humerus variable angle anatomical columnar plates (posterolateral, medial) Posterolateral – 3.5mm (3 to 9 holes with 2 holes variation) Posterolateral plate with support – 3.5 mm (3 to 9 holes with 2 holes variation) Medial – 3.5mm (3 to 9 holes with 2 holes variation)
Extra-articular distal humerus variable angle plate 4 to 14 holes with 2 holes variation
Titanium/LVM RADIUS / ULNA FRACTURE SET including any of the below mentioned implants along with compatible screws of variable lengths and diameter
3.5 Dynamic/Locking Compression Plate (DCP/LCDCP) 3.5mm: 4 to 12 holes (2-hole variation)
Distal radius locking plates (variable angle, side specific, column specific, volar and dorsal plates) 2.4 mm (2 to 6 holes), 2.7 mm (3 to 6 holes), 3.5 mm (3 to 6 holes)
Olecranon variable angle plates (Regular and Hook plates) 3.5mm: 2 to 12 holes (2-hole variation)
Radial head prosthesis (Cemented and uncemented) 18mm to 28 mm with 2mm variation
Radial head plates 2 to 5 holes
Square nails for Radius and Ulna 1.5, 1.8, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5 mm
Miscellaneous implants
Herbert screws Diameter: 2.5 and 3 mm (8 to 30 mm length), 3.5 and 4.5 mm (8 to 80 mm length), 5.5 and 6.5 mm (12 to 120 mm length)
K wires 1, 1.5, 2, 2.5, 3 mm
SS wires 1, 1.2, 1.5. 2, 2.5, 3 mm
Titanium elastic nail system (TENS) Length: 440mm Diameter: 2 mm to 5 mm with 0.5 mm variation
Cannulated cancellous screws with washers 6.5mm (16mm thread) - 25 to 120 mm with 5 mm variation, (32mm thread) - 35 to 120 mm with 5 mm variation, (Fully threaded) -35 to 120 mm with 5 mm variation, 4mm (16mm thread) - 25 to 120 mm with 5 mm variation, (32mm thread) - 35 to 120 mm with 5 mm variation, (Fully threaded) -35 to 120 mm with 5 mm variation.
Clavicle Plates Hook Plate: 3.5mm (4 to 7 holes with 1-hole variation), Superior Anterior plate: 3.5mm (5 to 8 holes with 1-hole variation), Superior Anterior with Lateral Extension: 2.7/3.5 mm (3 to 8 holes with 1-hole variation)
Calcaneal Plates Type 1 to 5 (side specific)
OPEN FRACTURE SET including any of the below mentioned of variable diameter and lengths along with compatible wires/screws/pins of variable lengths and diameter
LRS external fixator system 3.5, 4.5, 5.5 mm
External fixator System 3.5 mm and 4.5 mm
Joshi external stabilsation system (JESS fixator) 2.5, 3.5 mm
IMPLANTS FOR ORTHOPAEDIC SPINE SURGERIES:
THORACOLUMBAR SPINE
Monoaxial Screws Diameter: 4.5, 5.5, 6.5, 7.5 mm Length: 25 to 50 mm (5 mm variation)
Polyaxial Screws Diameter: 4.5, 5.5, 6.5, 7.5 mm Length: 25 to 50 mm (5 mm variation)
Monoaxial Reduction Screws Diameter: 4.5, 5.5, 6.5 mm Length: 25 to 50 mm (5 mm variation)
Polyaxial Reduction Screws Diameter: 4.5,5.5,6.5 mm Length: 25 to 50 mm (5 mm variation)
Iliac Screws Diameter: 6.5, 7.5 mm Length: 55 to 100 mm (5 mm variation)
Rod Diameter: 5.5 mm Length: 50 to 150 mm (10 mm variation), 150 to 500 mm (50 mm variation)
Cobalt Chromium Rod Diameter: 5.5 mm (CoCr) Length: 600 mm
Tapered Rod Diameter: 3.5, 5.5 mm Length: 300 mm
Pedicle Crosslink Connector Size: Small, Medium, Large
Lateral Offset Connector Length: 20 to 35 mm (5 mm variation)
Transverse connector Connecting Rod Diameter: 3 mm Length: 80, 100 mm
Transverse Connector Diameter: 5.5 mm
Laminar Hook Narrow Blade
Pedicle Hook
Laminar Hook Reduced Distance
Laminar Hook Angle Blade
Staple
Dual Threaded Polyaxial Screws Diameter: 4.5, 5.5, 6.5 mm Length: 25 to 50 mm (5 mm variation)
Fenestrated Polyaxial Screws Diameter: 5.5, 6.5 mm Length: 25 to 50 mm (5 mm variation)
HA Coated Monoaxial Screws Diameter: 4.5, 5.5, 6.5 mm Length: 25 to 50 mm (5 mm variation)
HA Coated Polyaxial Screws Diameter: 4.5, 5.5, 6.5 mm Length: 25 to 50 mm (5 mm variation)
CERVICAL SPINE
Posterior Cervical Screws Diameter: 3.5 mm (Length-10 to 30 mm with 2 mm variation), 4mm (Length-10 to 40 mm with2 mm variation)
Reduction Posterior Screw Diameter: 3.5 mm (Length-10 to 30 mm with 2 mm variation), 4mm (Length-10 to 40 mm with2 mm variation)
Posterior Cervical Screws (Partially threaded) Diameter: 3.5, 4mmLength: 26 to 40 mm (2 mm variation)
Occipital Cervical Midline Fixation Plate Small, Medium, Large
Adjustable Occipital Plate
Occipital Plate Screw Diameter: 4, 4.5 mm Length: 8 to 18 mm (2 mm variation)
Occipital Cervical Pre-Curved Rod Length: 200mm
Occipital Cervical Plate with Rod Length: 200mm
Rod Diameter: 3.5mm Length: 25, 30, 40, 50, 60, 70, 80, 90, 100, 200, 250 mm
Parallel Connector 3 * 5.5, 5.5 * 5.5 mm
Hook Length: 4, 6.5 mm
Offset Dominos 3.5 * 5.5, 5.5 * 5.5
Transverse Connector Diameter: 3.5mm
Posterior laminar Plate (lateral + Long hole) 31, 33, 35 mm
Posterior laminar Plate (lateral hole) 29, 31, 33 mm
Posterior laminar Plate (long + double hole) 29, 31, 33 mm
Posterior laminar Plate (long + double hole) 27, 29, 31 mm
Posterior laminar straight Plate 40, 45, 50, 55 mm
Laminar self-tapping screws Length: 6 to 12 mm (2 mm variation)
Odontoid Screw 26 to 50 mm (2 mm variation)
C1C2 fully threaded screw 26 to 50 mm (2 mm variation)
Cervical Plate Length: 20, 22, 25, 27, 30, 32, 35, 38, 41, 44, 47, 50, 53, 56, 59, 62 mm
Cervical Plate 65, 68, 71, 74, 77, 80 mm
Self-tapping screw for cervical plate Diameter: 4mm Length: 12 to 20 mm
Self-drilling screw for cervical plate Diameter: 4mm Length: 12 to 20 mm
Emergency screw for Cervical plate Diameter: 4.3 mm Length: 12, 13, 14, 15 mm
INTERBODY FUSION DEVICES (CAGES)
Eco cage Diameter: 8 to 18 mm (2 mm variation) Length: 20 to 100 mm)
TLIF Cage Diameter: 7 to 16 mm Length: 25 and 30 mm
TLIF Cage (PEEK) Diameter: 7 to 12 mm Length: 25 and 30 mm
PLIF Cage Diameter: 7 to 12 mm Length: 20 and 25 mm
PLIF Cage (Bullet Type) Diameter: 7 to 16 mm Length: 20, 25, 30 mm
PLIF Cage (PEEK) Diameter: 7 to 12 mm Length: 20 and 25 mm
Lordotic PLIF Cage 0 and 4 degree Diameter: 7 to 16 mm Length: 20 and 25 mm
Lordotic PLIF Cage 0 and 4 degree (PEEK) Diameter: 7 to 16 mm Length: 20 and 25 mm
Oblique Lumbar Interbody Fusion Café 0, 6, 12 degree (PEEK) Diameter: 8 to 16 mm (2mm variation)Length: 40 to 60 mm (5 mm variation)
Cervical cage Diameter: 4 to 8 mm Length: 14 and 16 mm
Cervical cage (PEEK) Diameter: 4 to 8 mm Length: 14 and 16 mm
Cervical cage (re-cage) Diameter: 4 to 8 mm Length: 14 and 16 mm
Dio Cage Type Diameter: 5 to 8 mm Length: 14 and 16 mm
Dio Cage Type (PEEK) Diameter: 5 to 8 mm Length: 14 and 16 mm
Cervical Cage with screw Diameter: 5 to 10 mm Length: 13 mm
Cervical Cage with screw (PEEK) Diameter: 5 to 8 mm Length: 15 mm
Cervical Cage with Locking screws Diameter: 5 to 10 mm Length: 15 mm
Cervical Spacer Size: 3.5, 4.5, 5, 5.5, 6, 6.5 Length: 15 mm
X-Pan Pro Expandable Cage Diameter: 12 to 18 mm (2 mm variation) Length: 20 to 25mm, 25 to 35 mm, 35 to 45mm, 45 to 60 mm
Cervical Cage with Plate Diameter: 12 mm Length: 18 to 23mm, 23 to 28mm, 28 to 35mm, 35 to 50mm
MINIMALLY INVASIVE SURGERY (MIS)
Cannulated polyaxial screw (MIS) Diameter: 5.5 and 6.5 mm Length: 25 to 50 mm (5mm variation)
Rod (Curved) MIS Diameter: 5.5 mm Length: 40, 45, 50, 55, 60, 70, 80, 90, 100, 120, 130, 140, 150 mm
Rod (Straight) MIS Diameter: 5.5 mm Length: 90, 100, 120, 130, 140, 150, 160, 170, 180, 200, 250, 300 mm
MIS Long arm Polyaxial screw Diameter: 5.5 and 6.5 mm Length: 30 to 50 mm (5 mm variation)
Curved Rod 5.5mm (For long arm MIS) Diameter: 5.5 mm Length: 40, 45, 50, 55, 60, 70, 80, 90, 100, 120, 130, 140, 150 mm
Straight Rod 5.5mm (For long arm MIS) Diameter: 5.5 mm Length: 90, 100, 120, 130, 140, 150, 180, 200, 250, 300 mm
IMPLANTS FOR ARTHROSCOPY SURGERIES:
KNEE ARTHROSCOPY:
ACL reverse tight rope
Shaver blades
Suture discs
Bioabsorbable interference screw (18, 20, 25 mm)
All inside system for meniscus repair
Fibre wire
Fibre Tape
Inside out system for meniscus repair
Radiofrequency Wand
SHOULDER ARTHROSCOPY:
Titanium suture anchor size 5.5 mm
Titanium suture anchor size 3 mm
All suture anchor 2.8 mm
Knotless anchor 5 mm
Shaver blade
Fibre Tape
Fibre wire
TURP tubing with hand pump
Cannula system 6mm/7mm/8mm
Radiofrequency Wand
IMPLANTS FOR ARTHROPLASTY SURGERIES:
CEMENTED TOTAL KNEE REPLACEMENT:
Femoral component of variable sizes
HWPE Spacer of variable sizes
Tibial tray of variable sizes and lengths (including tibial extender stems)
Patellar component
CEMENTED TOTAL HIP REPLACEMENT SURGERY:
Acetabular cup of variable sizes
HWPE liner
Femoral stem of variable size designs/ types
Head insert and neck insert of variable sizes
Cement 40 gm (Palacos / simplex)
UNCEMENTED TOTAL HIP REPLACEMENT:
Acetabular cup of variable sizes
HWPE liner
Femoral stem of variable size designs/ types
Head insert and neck insert of variable sizes
REVISION TKR:
FEMORAL COMPONENT
TIBIAL TRAY
INSERT
OFF SET STEM
DISTAL AUGMENT
ILLIZAROV IMPLANTS:
Half Ring 140 to 200 mm
Bolts Small, Large
Schanz pins 3.5, 4.5, 5.5, 6, 6.5 mm
Olive wires
Trochar tip wires
Bayonet tip wires
Male Hinge 1 to 4 holes
Female hinge 1 to 4 holes
Plate 3.5mm (2 holes to 5 holes)
Rancho 1 hole to 3 holes
Washer 1.5, 2, 2.5 mm
Male post 2 holes to 5 holes
Female post 2 holes to 5 holes
Curved plate 3 holes to 5 holes
5/8 Ring 140, 150, 160 mm
Struts 3 to 40 cm
Italian arches Small, Medium, Large
Oblique connections Small, Medium, Large
UKR (Meril)
Femur Cambrece
Tibia Cambrece
Parcus Cambrece
Reverse Shoulder
Glenoid Component
Humeral Component
LVM Rates
Titanium / LVM FEMUR FRACTURE SET including any of the below mentioned implants along with compatible screws/bolts/blade of variable lengths and diameter
PFN-A (Proximal Femoral Nail) , Length: 180 mm and 240 mm (Diameter 9, 10, 11, 12 ,13 mm) , Length: 320 mm to 460 mm (with 20 mm variation) - Diameter: 9, 10, 11, 12 mm
Femur Interlocking nail / Trochanteric Femur Nail Length: 320 mm to 460 mm (with 20 mm variation) Diameter: 9, 10, 11, 12 mm (Both Right and Left side)
Dynamic Hip Screw (DHS) Angle: 130 and 135 degree (3-6 holes each) Screw size – 8 mm (50 to 120mm with 5 mm variation)
DFN (Distal Femoral Nail) Length: 160 mm to 440 mm (with 20 mm variation) Diameter: 9, 10, 11, 12, 13mm
Proximal Femur Locking plate 5 mm (4 to 12 holes with 2 mm variation)
Distal femur osteotomy plate (Medial and Lateral) 4.5 mm (2 to 5 holes) (both medial and lateral)
Distal femur Locking Plate (Medial and Lateral) Lateral Plate: 4.5/5mm (5 to 15 holes with 2-hole variation)
Titanium/LVM TIBIA and FIBULA FRACTURE SET including any of the below mentioned implants along with compatible screws/bolts/blade of variable lengths and diameter
Tibia interlocking nail including Expert and Tip Locking nail Length: 260 mm to 400 mm (With 20 mm variation) Diameter: 8, 9, 10, 11 mm
Proximal tibia variable angle 3.5 mm locking plates (Medial, Raft, Lateral, Posteromedial) Lateral – 3.5 mm: 6 to 16 holes (2-hole variation) Medial – 3.5 mm: 4 to 16 holes (2-hole variation)
Distal tibia variable angle Locking plates (Medial, Anterolateral, Posterior) Medial - 3.5mm:4 to 14 holes (2-hole variation) Anterolateral – 3.5mm: 5 to 21 holes (2-hole variation)
Anatomical variable angle Distal fibula plate 3.5 mm: 3 to 11 holes (2-hole variation)
Reconstruction (RECON) plates 3.5mm (5 to 12 holes with 1-hole variation, 12 to 22 holes with 2-hole variation)
1/3 rd Tubular plates / Semi tubular plates 3.5 mm (4 to 12 holes with 1-hole variation)
Posterior malleolar variable angle plates 3.5 mm (3 to 5 holes)
Rush nails Length: 140 to 400mm Diameter: 1.5, 1.8, 2, 2.5, 3, 3.5, 4, 4.5 mm
High Tibial Osteotomy plates 3.5 mm (2 to 5 holes)
Titanium/LVM HUMERUS FRACTURE SET including any of the below mentioned implants along with compatible screws/bolts/blade of variable lengths and diameter
Variable angle PHILOS plate (Proximal humerus plates) 3.5 mm (3 to 8 holes)
Humerus nail (Multilocked and Simple; Solid and cannulated) Length: 180 to 300 mm (10 mm variation)Diameter: 6, 6.5, 7, 7.5, 8 mm
4.5mm narrow and broad Locking compression plate (LCDCP) 4.5 mm (5 to 16 holes with 1-hole variation, 16 to 24 holes with 2-hole variation)
Distal humerus variable angle anatomical columnar plates (posterolateral, medial) Posterolateral – 3.5mm (3 to 9 holes with 2 holes variation) Posterolateral plate with support – 3.5 mm (3 to 9 holes with 2 holes variation) Medial – 3.5mm (3 to 9 holes with 2 holes variation)
Extra-articular distal humerus variable angle plate 4 to 14 holes with 2 holes variation
Titanium/LVM RADIUS / ULNA FRACTURE SET including any of the below mentioned implants along with compatible screws of variable lengths and diameter
3.5 Dynamic/Locking Compression Plate (DCP/LCDCP) 3.5mm: 4 to 12 holes (2-hole variation)
Distal radius locking plates (variable angle, side specific, column specific, volar and dorsal plates) 2.4 mm (2 to 6 holes), 2.7 mm (3 to 6 holes), 3.5 mm (3 to 6 holes)
Olecranon variable angle plates (Regular and Hook plates) 3.5mm: 2 to 12 holes (2-hole variation)
Radial head prosthesis (Cemented and uncemented) 18mm to 28 mm with 2mm variation
Radial head plates 2 to 5 holes
Square nails for Radius and Ulna 1.5, 1.8, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5 mm
Miscellaneous implants
Herbert screws Diameter: 2.5 and 3 mm (8 to 30 mm length), 3.5 and 4.5 mm (8 to 80 mm length), 5.5 and 6.5 mm (12 to 120 mm length)
K wires 1, 1.5, 2, 2.5, 3 mm
SS wires 1, 1.2, 1.5. 2, 2.5, 3 mm
Titanium elastic nail system (TENS) Length: 440mm Diameter: 2 mm to 5 mm with 0.5 mm variation
Cannulated cancellous screws with washers 6.5mm (16mm thread) - 25 to 120 mm with 5 mm variation, (32mm thread) - 35 to 120 mm with 5 mm variation, (Fully threaded) -35 to 120 mm with 5 mm variation, 4mm (16mm thread) - 25 to 120 mm with 5 mm variation, (32mm thread) - 35 to 120 mm with 5 mm variation, (Fully threaded) -35 to 120 mm with 5 mm variation.
Clavicle Plates Hook Plate: 3.5mm (4 to 7 holes with 1-hole variation), Superior Anterior plate: 3.5mm (5 to 8 holes with 1-hole variation), Superior Anterior with Lateral Extension: 2.7/3.5 mm (3 to 8 holes with 1-hole variation)
Calcaneal Plates Type 1 to 5 (side specific)
OPEN FRACTURE SET including any of the below mentioned of variable diameter and lengths along with compatible wires/screws/pins of variable lengths and diameter
LRS external fixator system 3.5, 4.5, 5.5 mm
External fixator System 3.5 mm and 4.5 mm
Joshi external stabilsation system (JESS fixator) 2.5, 3.5 mm
IMPLANTS FOR ORTHOPAEDIC SPINE SURGERIES:
THORACOLUMBAR SPINE
Monoaxial Screws Diameter: 4.5, 5.5, 6.5, 7.5 mm Length: 25 to 50 mm (5 mm variation)
Polyaxial Screws Diameter: 4.5, 5.5, 6.5, 7.5 mm Length: 25 to 50 mm (5 mm variation)
Monoaxial Reduction Screws Diameter: 4.5, 5.5, 6.5 mm Length: 25 to 50 mm (5 mm variation)
Polyaxial Reduction Screws Diameter: 4.5,5.5,6.5 mm Length: 25 to 50 mm (5 mm variation)
Iliac Screws Diameter: 6.5, 7.5 mm Length: 55 to 100 mm (5 mm variation)
Rod Diameter: 5.5 mm Length: 50 to 150 mm (10 mm variation), 150 to 500 mm (50 mm variation)
Cobalt Chromium Rod Diameter: 5.5 mm (CoCr) Length: 600 mm
Tapered Rod Diameter: 3.5, 5.5 mm Length: 300 mm
Pedicle Crosslink Connector Size: Small, Medium, Large
Lateral Offset Connector Length: 20 to 35 mm (5 mm variation)
Transverse connector Connecting Rod Diameter: 3 mm Length: 80, 100 mm
Transverse Connector Diameter: 5.5 mm
Laminar Hook Narrow Blade
Pedicle Hook
Laminar Hook Reduced Distance
Laminar Hook Angle Blade
Staple
Dual Threaded Polyaxial Screws Diameter: 4.5, 5.5, 6.5 mm Length: 25 to 50 mm (5 mm variation)
Fenestrated Polyaxial Screws Diameter: 5.5, 6.5 mm Length: 25 to 50 mm (5 mm variation)
HA Coated Monoaxial Screws Diameter: 4.5, 5.5, 6.5 mm Length: 25 to 50 mm (5 mm variation)
HA Coated Polyaxial Screws Diameter: 4.5, 5.5, 6.5 mm Length: 25 to 50 mm (5 mm variation)
CERVICAL SPINE
Posterior Cervical Screws Diameter: 3.5 mm (Length-10 to 30 mm with 2 mm variation), 4mm (Length-10 to 40 mm with2 mm variation)
Reduction Posterior Screw Diameter: 3.5 mm (Length-10 to 30 mm with 2 mm variation), 4mm (Length-10 to 40 mm with2 mm variation)
Posterior Cervical Screws (Partially threaded) Diameter: 3.5, 4mmLength: 26 to 40 mm (2 mm variation)
Occipital Cervical Midline Fixation Plate Small, Medium, Large
Adjustable Occipital Plate
Occipital Plate Screw Diameter: 4, 4.5 mm Length: 8 to 18 mm (2 mm variation)
Occipital Cervical Pre-Curved Rod Length: 200mm
Occipital Cervical Plate with Rod Length: 200mm
Rod Diameter: 3.5mm Length: 25, 30, 40, 50, 60, 70, 80, 90, 100, 200, 250 mm
Parallel Connector 3 * 5.5, 5.5 * 5.5 mm
Hook Length: 4, 6.5 mm
Offset Dominos 3.5 * 5.5, 5.5 * 5.5
Transverse Connector Diameter: 3.5mm
Posterior laminar Plate (lateral + Long hole) 31, 33, 35 mm
Posterior laminar Plate (lateral hole) 29, 31, 33 mm
Posterior laminar Plate (long + double hole) 29, 31, 33 mm
Posterior laminar Plate (long + double hole) 27, 29, 31 mm
Posterior laminar straight Plate 40, 45, 50, 55 mm
Laminar self-tapping screws Length: 6 to 12 mm (2 mm variation)
Odontoid Screw 26 to 50 mm (2 mm variation)
C1C2 fully threaded screw 26 to 50 mm (2 mm variation)
Cervical Plate Length: 20, 22, 25, 27, 30, 32, 35, 38, 41, 44, 47, 50, 53, 56, 59, 62 mm
Cervical Plate 65, 68, 71, 74, 77, 80 mm
Self-tapping screw for cervical plate Diameter: 4mm Length: 12 to 20 mm
Self-drilling screw for cervical plate Diameter: 4mm Length: 12 to 20 mm
Emergency screw for Cervical plate Diameter: 4.3 mm Length: 12, 13, 14, 15 mm
INTERBODY FUSION DEVICES (CAGES)
Eco cage Diameter: 8 to 18 mm (2 mm variation) Length: 20 to 100 mm)
TLIF Cage Diameter: 7 to 16 mm Length: 25 and 30 mm
TLIF Cage (PEEK) Diameter: 7 to 12 mm Length: 25 and 30 mm
PLIF Cage Diameter: 7 to 12 mm Length: 20 and 25 mm
PLIF Cage (Bullet Type) Diameter: 7 to 16 mm Length: 20, 25, 30 mm
PLIF Cage (PEEK) Diameter: 7 to 12 mm Length: 20 and 25 mm
Lordotic PLIF Cage 0 and 4 degree Diameter: 7 to 16 mm Length: 20 and 25 mm
Lordotic PLIF Cage 0 and 4 degree (PEEK) Diameter: 7 to 16 mm Length: 20 and 25 mm
Oblique Lumbar Interbody Fusion Café 0, 6, 12 degree (PEEK) Diameter: 8 to 16 mm (2mm variation)Length: 40 to 60 mm (5 mm variation)
Cervical cage Diameter: 4 to 8 mm Length: 14 and 16 mm
Cervical cage (PEEK) Diameter: 4 to 8 mm Length: 14 and 16 mm
Cervical cage (re-cage) Diameter: 4 to 8 mm Length: 14 and 16 mm
Dio Cage Type Diameter: 5 to 8 mm Length: 14 and 16 mm
Dio Cage Type (PEEK) Diameter: 5 to 8 mm Length: 14 and 16 mm
Cervical Cage with screw Diameter: 5 to 10 mm Length: 13 mm
Cervical Cage with screw (PEEK) Diameter: 5 to 8 mm Length: 15 mm
Cervical Cage with Locking screws Diameter: 5 to 10 mm Length: 15 mm
Cervical Spacer Size: 3.5, 4.5, 5, 5.5, 6, 6.5 Length: 15 mm
X-Pan Pro Expandable Cage Diameter: 12 to 18 mm (2 mm variation) Length: 20 to 25mm, 25 to 35 mm, 35 to 45mm, 45 to 60 mm
Cervical Cage with Plate Diameter: 12 mm Length: 18 to 23mm, 23 to 28mm, 28 to 35mm, 35 to 50mm
MINIMALLY INVASIVE SURGERY (MIS)
Cannulated polyaxial screw (MIS) Diameter: 5.5 and 6.5 mm Length: 25 to 50 mm (5mm variation)
Rod (Curved) MIS Diameter: 5.5 mm Length: 40, 45, 50, 55, 60, 70, 80, 90, 100, 120, 130, 140, 150 mm
Rod (Straight) MIS Diameter: 5.5 mm Length: 90, 100, 120, 130, 140, 150, 160, 170, 180, 200, 250, 300 mm
MIS Long arm Polyaxial screw Diameter: 5.5 and 6.5 mm Length: 30 to 50 mm (5 mm variation)
Curved Rod 5.5mm (For long arm MIS) Diameter: 5.5 mm Length: 40, 45, 50, 55, 60, 70, 80, 90, 100, 120, 130, 140, 150 mm
Straight Rod 5.5mm (For long arm MIS) Diameter: 5.5 mm Length: 90, 100, 120, 130, 140, 150, 180, 200, 250, 300 mm
IMPLANTS FOR ARTHROSCOPY SURGERIES:
KNEE ARTHROSCOPY:
ACL reverse tight rope
Shaver blades
Suture discs
Bioabsorbable interference screw (18, 20, 25 mm)
All inside system for meniscus repair
Fibre wire
Fibre Tape
Inside out system for meniscus repair
Radiofrequency Wand
SHOULDER ARTHROSCOPY:
Titanium suture anchor size 5.5 mm
Titanium suture anchor size 3 mm
All suture anchor 2.8 mm
Knotless anchor 5 mm
Shaver blade
Fibre Tape
Fibre wire
TURP tubing with hand pump
Cannula system 6mm/7mm/8mm
Radiofrequency Wand
IMPLANTS FOR ARTHROPLASTY SURGERIES:
CEMENTED TOTAL KNEE REPLACEMENT:
Femoral component of variable sizes
HWPE Spacer of variable sizes
Tibial tray of variable sizes and lengths (including tibial extender stems)
Patellar component
CEMENTED TOTAL HIP REPLACEMENT SURGERY:
Acetabular cup of variable sizes
HWPE liner
Femoral stem of variable size designs/ types
Head insert and neck insert of variable sizes
Cement 40 gm (Palacos / simplex)
UNCEMENTED TOTAL HIP REPLACEMENT:
Acetabular cup of variable sizes
HWPE liner
Femoral stem of variable size designs/ types
Head insert and neck insert of variable sizes
REVISION TKR:
FEMORAL COMPONENT
TIBIAL TRAY
INSERT
OFF SET STEM
DISTAL AUGMENT
ILLIZAROV IMPLANTS:
Half Ring 140 to 200 mm
Bolts Small, Large
Schanz pins 3.5, 4.5, 5.5, 6, 6.5 mm
Olive wires
Trochar tip wires
Bayonet tip wires
Male Hinge 1 to 4 holes
Female hinge 1 to 4 holes
Plate 3.5mm (2 holes to 5 holes)
Rancho 1 hole to 3 holes
Washer 1.5, 2, 2.5 mm
Male post 2 holes to 5 holes
Female post 2 holes to 5 holes
Curved plate 3 holes to 5 holes
5/8 Ring 140, 150, 160 mm
Struts 3 to 40 cm
Italian arches Small, Medium, Large
Oblique connections Small, Medium, Large
UKR (Meril)
Femur Cambrece
Tibia Cambrece
Parcus Cambrece
Reverse Shoulder
Glenoid Component
Humeral Component
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .