GE(U)/CHM-54/2021-22 REPAIRS TO JOINERY FLOORING PLUMBING CEILING PERIODICAL SERVICES AND INTERNAL ELECTRIFICATION WORKS FOR ICU OT POSU RSC SURG-I AND II MED- I TO IV OFFRS WD ETC AT 2ND 3RD 4TH 5TH AND TERRACE AT COMMAND HOSPITAL (WC) CHANDIMANDI

Amount

Taking down chowkhats or frames n. exc 1.5 sqm each (without taking off shutters from the frames) including cutting out holes for taking out holdfasts and filling the same with PCC 1:2:4 (12.5 mm graded aggregate) , forming jamb if required and plastering jamb cill soffits with CM 1:4 full thickness of wall and side of walls if broken upto 300mm each side during dismantling and making good surfaces with preparation and painting the surfaces with two coats of matching colour on outer and inner surface of wall complete all as specified and directed. Note : Rate also includes labour and material cost of PCC and bricks if required to make good the surface jambs , plastering and painting with matching shade upto complete satisfaction of Engineer-in-Charge

All as per the description of serial item No 1 herein above but exc. 1.5 Sqm and n. exc 4 Sqm each

Taking down shutter of any description n exc 1 sqm each, complete all as specified and as directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each, complete all as specified and as directed.

Taking down shutter of any description exc 2 sqm each, complete all as specified and as directed.

35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (with out shash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.

30 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and as directed.

Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

Factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (stile), with 2, 4 or 6 raised panel design with 2mm thick single piece extruded PVC profile on the front face & 2mm plain coloured single piece extruded PVC profile on back face etc complete all as specified and as directed.

Aluminium barrel tower bolt, 150 mm long,extruded section complete all as specified and as directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed

100mm butt hinges, extruded brass with brass hinge pin bright polished and fixed etc complete all as specified and as directed.

150mm long extruded aluminium alloy handle, fabricated type, anodised etc complete all as specified and as directed.

Mortice lock brass 4 levers, vertical type 100 mm, fixed in repairs, complete all as specified and as directed.

Powder coated aluminium alloy curtain rails 20mm dia fixed to required lenghts etc, fixed in reapirs, complete all as specified and as directed.

Brass chromium plated curtain rails brackets fancy type for 20mm dia curtain rails etc, fixed in repairs, complete all as specified and as directed.

Floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor overall length of cover plate 150mm etc, fixed in repairs, complete all as specified and as directed.

Aluminum (extruded section body) door closer hydraulically regulated, universal type suitable for door 61 to 80 Kg of approved make, fixed in repairs, complete all as specified and as directed.

Powder coated aluminium frames (Thickness of powder coating not less than 50 micron) for doors , windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified (Thickness of section not less than 3.00MM)

Powder coated aluminium door shutters partly glazed and partly panelled, (thickness of powder coating not less than 50 microns) made out of hollow extruded aluminium sections of size not less than 100mmx44-45mmx2mm for top rail, 83mm x 44-45mm x 2mm for vertical siles & 150mmx44mmx2mm for bottom/middle rail with & including 5.5mm thick tinted glass/ 12mm thick prelaminated particle board/stainless steel wire cloth and necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc complete all as specified and as directed. Each door shall be having 2 Nos American handles, 2 Nos 200mm long aluminium tower bolts, 03 Nos aluminum hinges (per leaf), 1 No 6 lever brass mortice lock cost of which shall deemed to be included in unit quoted rate.

Powder coated aluminium window/ventilator shutters (thickness of powder coating not less than 50 micron), made out of hollow extruded aluminium sections of size not less than 83mmx44-45mmx2mm, fixed to frame including necessary joining cleats, glazing clips, rubber packing, screws, anodised aluminum fittings such as snap beading, lock type handle of size 75mm, 02 Nos 150mm long aluminium tower bolts, 02 Nos 100mm Hinges (per leaf) with & including glass/ wire cloth etc complete all as specified and as directed.

5.5mm thick tinted glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm in each pane complete all as specified and as directed.

All as per the description of serial item No 22 herein above but exc 0.50 sqm in each pane.

0.56mm thick plain aluminium sheeting as in ridges, hips, valley gutter, drip and straight flashing etc, fixed in repairs, complete all as specified and as directed.

17/18mm thick pre laminated PVC Solid board, pre laminated both side with white lamination as in cupboard side box, cupboard shutters, shelves and drawers fixed with screws and adhesive (Each Individual part will be measured seprately) complete all as specified and as directed.

9mm thick pre-laminated particle board, interior grade, pre-laminated both side with decorative choice lamination, ISI marked ( IS: 12853) fixed as panels in aluminium joinery etc in repair complete all as specified and as directed.

Preparation of new wood surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of old wood surface of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing unserviceable tiles from outside of CH (WC) Chm, complete all as specified and as directed.

Coloured Vitrified ceramic tiles digital 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc, complete all as specified and as directed.

All as per the description of serial item No 30 herein above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM (1:4) etc complete all as specified and as directed.

Glazed ceramic coloured tiles of size 300mmx450mmx7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc to match including 10 mm thick screed bed or bedding layers in CM (1:4) complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thick ness in floors aprons etc laid beded and pointed in any mortar, complete all as specified and as directed.

Granite (of any type) work 16 to 18mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, windowcills, cooking platforms, vertical surfaces and like with and including 15mm thick bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc, complete all as specified and as directed.

Baroda green marble work 16 to 18mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, windowcills, cooking platforms, vertical surfaces and like with and including 15mm thick bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and as directed.

Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

Preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of birla white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as specified and as directed.

Preparation of old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and as directed.

Preparation of old plastered surfaces of ceiling and applying two coats of oil emulsion distemper etc complete all as specified and as directed.

Preparation of old plastered surfaces of wall and applying one coat of oil emulsion distemper etc complete all as specified and as directed.

preparation of old plastered surfaces of wall and applying two coats of oil emulsion distemper etc complete all as specified and as directed.

Complete removal of old treated surfaces on walls and applying one coat of alkali fungal resistance primer and a coat of Birla white cement putty ,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as specified and as directed.

Complete removal of old treated surfaces on wall and applying one coat of alkali resistant primer and a coat of Birla white cement putty ,sanding the surfaces till smooth finish is obtained and finally applying two coats of plastic emulsion paint etc complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed.

Supply and fixing false ceiling of perforated particle designer of size 595mm x 595mm x 4mm thick fixed on percolated GI everest grid of tee 2430, framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm fixed in ceiling with necessary fitting and fixtures as per manufactures instructions, etc complete all as specified and as directed.

25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed.

Welding in repairs exc 2.5cm but n. exc 5 cm in length & n. exc. 6mm thickness of metal to be welded complete all as specified and as directed.

Preparation of old steel surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-310-O or Fe-410-O fixed as in repair complete all as specified and directed.

1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repairs, complete all as specified and as directed.

Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and as directed.

GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking down GI tubing with all fittings etc complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed.

Bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and as directed.

15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc, fixed in repairs, complete all as specified and as directed.

15mm bore brass CP fancy Type center hole basin mixer for mixing hot & cold water screwed down for iron fixed etc, fixed in repairs. complete all as specified and directed.

Angular stop valves 15 mm dia cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions, fixed in repairs, complete all as specified and directed.

Fixing in in repair, auto closing concealed urinal flush value with wall flange including necessary repair to making good existing surface complete all as specific make Jaquar cat part No PR-073 or equivalent as approved by GE.

Fixing in repair, metropolis flush vave dual flow 32mm size (concealed body) with exposed shall off provision and 100mm seucre plate including necessary repair of making good existing surface complete all as specific Make Jaquar cat part No FLV 108550 or equivalent as approved by GE.

Waste fitting (brass, chromium plated) of any size for sinks, wash basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other and fixed etc, fixed in repairs, complete all as specified and as directed.

PVC waste pipe 32/40mm dia etc, fixed in repairs, complete all as specified and as directed.

Ball valve of PVC complete with aluminum rod with polyplast ball for 15mm dia iron pipe, fixed in repairs, complete all as specified and as directed, for low level flushing cistern.

Cast iron sand soil waste or vent pipes 100 mm bore in any length with or without ears with cement joints laid in trenches, floors or fixed to walls, fixed in repairs, complete all as specified and as directed.

All as per the description of serial Item No 65 herein above but 75 mm bore.

Cast iron bends 100 mm bore (any radius) diminishing pieces or tapers (larger bore measured), fixed in repairs, complete all as specified and as directed.

All as per the description of serial Item No 67 herein above but 75 mm bore of pipe.

CP brass bottle trap 32 mm dia including joining to waste fitting and waste pipe, fixed in repairs, complete all as specified and as directed.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts incl making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete etc, fixed in repairs, complete all as specified and as directed.

Eelegent mirror PVC cabinet with towel rail of size 475 x 600 x 150 mm, fixed in repairs, complete all as specified and as directed.

CP Toilet paper holder, fixed with CP brass screws etc, fixed in repairs, complete all as specified and as directed.

Viterous china squatting pan Orissa pattern size 580 x 440mm white with 'P' or 'S' trap, front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding and connections to flushing cistern/pipe and making good disturbed portion to match existing surface etc, fixed in repairs, complete all as specified and as directed.

Flush pipe PVC for low level flushing cistern including jointing to WC, fixed in repairs, complete all as specified and as directed.( Make : as per sample)

Vitreous china wash down water closet pan (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device, fixed in repairs, complete all as specified and directed.

Plastic water closet seat cover white /colour, closed pattern with flat bottom end cover and mild steel chromium plated hanging device etc, fixed in repairs, complete all as specified and as directed.

Vitreous china wash basin white flat back size 550 mm x 400mm incl all fittings incl cutting for and pinning in ends of brackets or erecting stand etc complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate), fixed in repairs, complete all as specified and as directed.

Fancy type Brass chromium plated soap dish fixed with screws and wooden/plastic cleats etc, fixed in repairs, complete all as specified and as directed.

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf of size 600x120mm with brass chromiun plated fancy brackets and railing fixed with screws and wooden/plastic cleats etc, fixed in repairs, complete all as specified and as directed.

PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe, fixed in repairs, complete all as specified and as directed.

PVC syphone with handle complete for low level flushing cistern, fixed in repairs, complete all as specified and as directed.

110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor/fixed to walls etc, fixed in repairs, complete all as specified and as directed.

All as per the description of serial item No 83 herein above but 75mm dia PVC (SWR) pipes.

110 mm dia PVC (SWR) bends of any radius complete all as specified and directed

75 mm dia PVC (SWR) bends of any radius complete all as specified and directed

Grating CP 110 mm dia etc, fixed in repairs, complete all as specified and as directed.

15 mm dia 450/600 mm long PVC connection pipe with 02 Nos nut at each ends with rubber washer etc, fixed in repairs, complete all as specified and as directed.

Fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc, fixed in repairs, complete all as specified and as directed.

75mm dia cast iron nahani trap/floor trap, with stainless steel grating including grating jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including taking out old floor trap, complete all as specified and as directed.

Brass chromium plated fancy type health faucet or aeroplane jet with 900mm long stainless steel knitted hose pipe for faucet/sensor mixer etc, fixed in repairs, complete all as specified and as directed.

point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and unsheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and as directed for the following :- Make of cable : Plaza/Finolex/Havells

One light point controlled by one switch/one fan point controlled by one switch & fan regulator.

One socket outlet three pin, 5 Amps on the same board.

One socket outlet three pin, 5 Amps, independent.

One light point controlled by one bell push.

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 4 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 4 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC caping and casing with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and sheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified. Make of cable : Plaza/Finolex/Havells

Point wiring using approved colour coding as per IS (For phase and neural), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cabel 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC casing and caping with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells

Modular metal flush terminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed. Make :SSK/Legrand/Anchor

Modular metal flush terminal boxes with lumina plate and frame suitable for 4-5 module complete all as specified and directed. Make :SSK/Legrand/Anchor.

Modular metal flush terminal boxes with lumina plate and frame suitable for 6 module complete all as specified and directed. Make :SSK/Legrand/Anchor.

Modular metal flush terminal boxes with lumina plate and frame suitable for 8 module complete all as specified and directed. Make :SSK/Legrand/Anchor

Switch modular type single pole one module, 6 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Switch modular type single pole one module, 16 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Modular bell push single pole one module, 6 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Modular blank plate one module.

Modular fan step regulator 120 watts for 48"/56" sweep ceiling fan 2 module complete all as specified and as directed.

Ceiling rose 3 pin, 230 volts PVC polycarbonate insulated body complete all as specified. Make : SSK/CONA/ANCHOR.

Bell ding dong AC 230 volts PVC polycarbonate insulated body complete all as specified and as directed. Make : CONA/ANCHOR/LEGRAND.

Supply and fixing, in replacement, LED battern made out of CRCA MS sheet/ alumunium, 4 feet long ,box with miniumu depth of 25mm with front openable cover both side connection arrangement suitable for rertrofit led tube complete all as specified and directed. Make : Halonix/Crompton/Anchor Panasonic/ Havells

Supply and fixing, in replacement, Retrofit LED tube light 18/20 watt minimum lumens 1980 of 4 feet size with adjustable holder with back spring with aluminium housing heat shrink both end connection. Make : Halonix/Crompton/Anchor Panasonic

Supply and fixing, in replacement, deep type recess mounted LED 36 watt Luminaire equiped with CRCA powder coating housing, antiglare diffuser with separate energy electronic driver of capacity 36 Watt minimum, 5700 K , 595mmX595mmX75mm dimensions, including fixing arrangement with existing complete all as specified and directed. Make : Pansonic/Halonix/C&S

Supply and fixing, in replacement, Indoor decorative LED battern with milky diffuser including 8 - 10 Watt 5700K LED strip including driver, accessories to fix the same with existing wall and all connected accessories as per manufacturers recommendation complete all as specified and directed .Make : C&S/ Halonix/Panasonic/ havells

Supply and fixing, in replacement of, surface/recess mounted slim squre type led panel with die cast aluminium housing and smooth power coated finish with anti glare UV stabilized diffuser and separate energy efficient eletronic driver having wattage 10 watt LED panel light,3000k,having dimension 120mmX120mmX35mm and making connection accessories complete all as specified and directed. Make : C&S/ Halonix/Panasonic/ havells

LED Luminaire 36 Watt, 6500 K suitable for armstorng/grid cealling/surface mounting, with its super bright LED, 2X2 GRID CEILING,including 42 watt LED strip recess mounted complete with drivers and others accessories as per manufactures recommendation complete including fixing arrengement with existing including taking down existing complete all as specified and directed. Make : Hallonix/ Panasonic/ C&S

Decorative wall mounted Bed side light including 5 watt LED bulb/strip Lamp of size: 13.4 cm x 12.4 cm x 8.2 cm Lamp Material: Metal, Synthetic, Color: White including taking down existing complete all as specified Make : Philips/ Wipro/Hallonix/ Crompton/Bajaj /Anchor Panasonic/HPL

Supply and fixing, in replacement, of surface/ recess mounted circular LED down lighter with die cast aluminium housing and smooth power coated finish with anti glare UV stabilized diffuser and separate energy efficient eletronic driver having wattage 15 Watt LED down light,6000k, and making connection accessories complete all as specified and directed.Make : Panasonic/Halonix/C&S/ Havells

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. all as specified.

Sub main wiring in replacement (with approved colour coding as per IS) with single core FRLS PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable two runs of main cable) alongwith one run of single core FRLS PVC insulated flexible stranded copper Conductor 1.1 KV grade of earth for earthing drawn in suitable PVC conduit/ concealed conduits with following size. NOTES: (i) Conduit & conduit accessories shall be measured & paid for separately. (ii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 RUNNING METRE" MAKE OF CABLE: FINOLEX/RPG/PLAZA./Havells

2 run of 6 Sqmm cable + 1 run of 6Sqmm

2 run of 4 Sqmm cable + 1 run of 4Sqmm

25mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified and as directed.

Cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces including painting of wall matching with exisiting colour after concealing the conduit in wall, complete all as specified and as directed.

Taking down carefully opper/aluminium sub main wiring complete, including existing batten/conduit etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

Supply and fixing, in replacement, MCB DB, horizontal single phase consumer unit with provision for incoming 2 pole (MCB / Isolator / RCD) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 12 way all as specified. Make : Legrand / C&S/Havells.

MCB DB, horizontal single phase consumer unit with provision for incoming 2 pole (MCB / Isolator / RCD) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way including taking down existing complete all as specified and directed. Make : ABB/Hager/Legrand

Supply and fixing, in replacement, MCB SPN, 'C' series. 10 KA, 240 Volts 40 Amps capacity. Make : Legrand/ C&S/Siemens.

Supply and fix in replacment MCB SP, 'C' series. 10 KA, 240 Volts, 40 Amps capacity. Make : Legrand/C&S/ Siemens.

Supply and fixing, in replacment, MCB SP, 'C' series. 10 KA, 240 Volts, 6-32 Amps capacity. Make : Legrand/C&S/ Siemens.

Supply and fixing, in replacment, MCB TPN , 'C' series. 10 KA, 240 Volts, 63 Amps capacity. Make : Legrand/C&S/ Siemens.

Supply and fixing, in replacement, flush type single pole, one way 5 Amps switchs 240 volts all as specified.

Supply and fixing, in replacement, socket outlet 2-in-1,3 pin, 5 Amps flush type.

Supply and fixing, in replacement, flush type single pole, one way 15 Amps switch 240 volts, complete all as specified and as directed.

Supply and fixing, in replacement, socket outlet 2-in-1, 3 pin, 5 and 15 Amps flush type, complete all as specified and as directed.

Supply and fixing, in replacement, multipurpose 16 Amps combination PVC Gang box of size 7" x 4" including one switch and socket of 16 Amps complete all as specified and directed. Make : /Anchor/SSK/ABB

Supply and fixing, in replacement, multipurpose 6 Amps combination PVC Gang box of suitable size including one switch and socket of 6 Amps complete all as specified and directed. Make : Kingel/Anchor/SSK/ABB

Switch modular type single pole one module, 6 Amps complete all as specified and as directed. Make :SSK/Legrand/Anchor

Switch modular type single pole one module, 16 Amps complete all as specified and as directed. Make :SSK/Legrand/Anchor

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6 Amps,complete all as specified and as directed. Make :SSK/Legrand/Anchor

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Modular metal flush terminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed. Make : . Make :SSK/Legrand/Anchor

Modular metal flush terminal boxes with lumina plate and frame suitable for 6 module complete all as specified and directed. Make :SSK/Legrand/Anchor.

Supply and fixing only caping casing 20/40/25 mm as per requirement of sight any ISI marked

Supply and fixing, electronic driver of 36 watt,2.5 KV search protection as per existing in site suitable of LED Ceilling light 2X2 ,1X 4 ft , input suppply 140V -270V and output 12 Volt DC. Make : Crompton/Hallonix/Panasonic

Supply and fixing, sheet metal enclosure Two way , two module ,IP30 degree portection enclosure for 32 Amp MCB DP complete all as specified and directed. Make : Hager/Legrand/ Hensel/ABB

Supply and fixing, plug and socket outlet (with industrial plug and socket ) with provision to mount MCBs 20 A including 20A SP MCB , C series , 1 module , IP 30 degree protection complete all as specified and directed . Make : Hager/Legrand/ Hensel/ABB

Supply and fixing, in replacement, VTPN DB 4-ways, IP 43 - IK 09 with metal door (DPX3 160+12) suitable for surface/flush mounting as per site requirement with copper bus bar, with neutral bar, earth bar and cable ties for cable arrangement, fully insulated bus bar and neutral bar, door earthing, corner shield for better protection, pan assembly confirming to IS 8623 including making fixing arrangement with existing wall, complete all as specified and as directed. Make : Legrand / Siemen/Hager/C&S/ABB

Supply and fixing, in replacement, TPN DB , 4 Way (4+12 modules) double door , IP43 degree protection complete all as specified and directed. Make : Hager/ Legrand/ C&S/ ABB

Supply and fixing, in replacement, VTPN DB 12-ways, IP 43 - IK 09 with metal door (DPX3 250+36) suitable for surface/flush mounting as per site requirement with copper bus bar, with neutral bar, earth bar and cable ties for cable arrangement, fully insulated bus bar and neutral bar, door earthing, corner shield for better protection, pan assembly confirming to IS 8623 including making fixing arrangement with existing wall, complete all as specified and as directed. Make : Legrand / Siemen/Hager/C&S/ABB

Supply and fixing, MCCB 160 Amps 3 pole 415 volts 25 kA Ics=75% Icu including extended terminals all as specified and directed.Make: Legrand / Siemen/Hager/C&S/ABB

Supply and fixing, MCCB 250 Amps 4 pole 415 volts 36 kA Ics=75% Icu including extended terminals complete all as specified and as directed. Make: Legrand / Siemen/Hager/C&S/ABB

Earhting complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvenised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 05 connected to earthing test point all as specified or indicated including testing on completion.

Supply, install testing and commissioning of Automatic transfer switch (ATS) of capacity three phase 415 Volt, 50Hz, 4 pole and 160 Amp having suitable to 02 incoming and one out going with inbuilt time delay. The ATS should be capable of transfering load of first feeder to second feeder on failure of first feeder and wise versa automatically. the switch should have provision for automatic operation as well as manual operation and should be able for wall mounted including sheet metal enclouser with extrended terminal if required easy fixing of incoming and outgoing connection with free maint of work. Make: Havells/ Legrand/Hager

Supply, install testing and commissioning of Automatic transfer switch (ATS) of capacity three phase 415 Volt, 50Hz, 4 pole and 100 Amp having suitable to 02 incoming and one out going with inbuilt time delay. The ATS should be capable of transfering load of first feeder to second feeder on failure of first feeder and wise versa automatically. the switch should have provision for automatic operation as well as manual operation and should be able for wall mounted including sheet metal enclouser with extrended terminal if required easy fixing of incoming and outgoing connection with free maint of work. Make: Havells/ Legrand/Hager

M/S Gupta and Sons

Bharat Enterprises

m/s krishna engineers1