752785 WIDENING OF EXISTING ROAD FROM STN HQ TO KURUKSHETRA TRG AREA

Amount

SCHEDULE "A"

Item No 01:- Surface excavation not exceeding 30 cm deep and averaging15 cm deep and getting out in soft/loose of soil complete all as specified and directed.

Item No 2 :- Excavation over areas not exceeding 1.5m deep and getting out in hard/dense of soil complete all as specified and directed.

Item No 03 : Removal of excavated materials exceeding 250 m but not exceeding 500 m and depositing where directed complete all as specified and directed

Item No. 04 : Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in soft / Loose soil etc complete all as specified and directed

Item No. 05 : Excavation in trenches not exceeding 1.5m wide and not exceeding 3m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in soft / loose soil etc complete all as specified and directed

Item No. 06:- Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil etc complete all as specified and directed

Item No. 07 : Removing surplus excavated materials (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting points including spreading, complete all as specified and directed

Item No. 08 :- Grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site for girth of tree exceeding 30 cm and not exceeding 100 cm complete all as specified and directed.

Item No. 09 :- M & L for moorum filling in berms spread, rolled and consolidated to gradient and camber required, thickness of 100 mm complete all as specified and directed.

Item No 10 : Rolling and consolidating formation surfaces in cutting with power roller from exc 8 tonne to not exc 12 tonne complete all as specified and directed.

Item No 11 : M&L for 200 mm thick (spread thickness) soling with broken boulders or quarried stone (Granite / trap /basalt) interstices filled, surfaces formed, rolled and consolidated to required gradient and cmaber with 8 - 12 tonnes power roller complete all as specified and directed.

Item No 12 : M&L for 150 mm thick water bound macadam in two equal layers of 75 mm each (compacted thickness), with coarse aggregate of stone (granite / trap / basalt) 63 mm to 40 mm size, spread, rolled and consolidated to required gradient and camber complete all as specified and directed.

Item No 13 : M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

Item No 14 :- M&L for preparing un-surfaced water bound macadam by brushing with wire brushes for removing caked mud etc sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

Item No 15 :- M&L using Paving bitumen applying evenly a priming/tack coat with bituminous primer at 10 Kg per 10 Sq meters. complete all as specified and directed.

Item No 16 :- M & L Binder content paving bitumen any penetration providing semi asphaltic dense concrete 40 mm consolidated thickness with 5.50% binder content by weight of total mix, rolled & compacted to required camber & gradient (paving bitumen) rolled to required level & gradient, rolled to a uniform smooth surface with 8 to 10 tonne power roller, complete. (Mix shall be obtained from HOT MIX PLANT and spreading shall be done with MECHANICAL PAVER) complete all as specified and directed.

Item No 17 :- Hardcore of gauge n exc. 63mm, deposited spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

Item No. 18 : M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in road side kerbs including use of form work & moulds. complete all as specified and directed.

Item No 19 : M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Item No 20 :- M & L for scarifying or picking gravelled, macadam or bituminious macadam surface in area exc 400 Sqm and stacking complete all as specified and directed.

Item No 21 :- M & L for 50 mm thick (consolidated thickness) bituminous macadam using paving bitumen, binder content @ 4% laid/ rolled and compacted to required gradient and camber complete all as specified and directed.

Item No 22 : M & L for RCC pipe 600 MM dia Class NP3 laid jointed complete with collers. complete all as specified and directed.

Item No. 23 :- M&L for cement concrete bed to drain pipes including packing under and completely surrounding pipe after they are laid & tested for 600 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

Item No 24 : Dismantling RCC posts or struts any section, including taking out embedded in concrete portion and making good disturbed ground complete all as specified and directed.

Item No 25 : M&L for preparation of existing bituminious surfaces removing dust, dirt grese and other foreign materials etc. to receive the marking and for thermoplastic (Reflective line marking having 1.0 mm thickness (average) of inform surface finish confirm to BS 3262 (Part-I) 1989 read in conjuction with most specification 803 clause 4.2.2 on bituminous surfaces in white / yellow colour and super imposed glass beads confirm to BS 6088 read in consuction with and most specification 803 clause 4.3.3 complete all as specified and directed.

Item No 26 : S & F Cat eyes / road for roadways sign permanent surface mounted type having tough poly carbonate micro replicated corner cube reflector lenses with a protective abrission resistant ceramor coating having body of weather proof and impact resistant thermoplast complete as per manufacture instruction and as directed (colour :- Yellow/Red/Amber) make series 290 of 3M or Road star or equivalent as per list of make.

Item No 27 - S & F solar cat eyes / road studs size (mm) 125L x 125B x 25H including stem height53 mm approx housing dia cast aluminium (grade LM-6) fully water proof and weather proof and weather proof coating visible distance upto 400 mtr LED-6 super bright amber led (3 Nos each side) yellow charged flush frequency 1.2 Hz including solar panel 3.5 V /110MA & battery one PC sub 'C' type Nicd rechargable battery 1.2V /2.5H temp range 20C to 70C fixed on roadway sign complete as per manufacture's instruction anddirected by Engineer - in - charge make - 3M/Avery Dennision / Dark Eye / Green lite /Road Star Cat part No GSR - 909 ro Equvalent of approved make list.

Item No 28 :- Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

External Electric Supply

Item No 29:- M & L for clean dry river sand in trenches/ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth after laying the cable complete all as specified. Note:- Punned thickness shall be measured and paid.

Item No 30 :- Supplying and laying un-reinforced precast concrete cable covers, class LV, type 1, Flat, size 250 mm x 150 mm x 40 mm in trenches for cable protection, embossed with "LT 1100 VOLTS ELECTRIC" on the top surface complete all as specified and directed.

Item No. 31 :- M & L for Cement Concrete 1:3:6, C-1 (20 mm graded aggregate) as in coping of pole etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified

Item No 32 : S&F Cable route indicator/Marker made up of PCC Block in cement mortar 1:3:6 (20 mm graded aggregate) of size 900 x 300 x 100 mm thick with "DANGER/LT 433 / VOLTS CABLE/DANGER / MES" embossing on cable route indicator / Marker including painting as per approved colour and buried in ground 45 Cms including necessary earth work (as required / ordered at site) complete all as specified and as directed.

Item No 33 : Material and labour for boring hole under the road/pavment/hard standing with the help of trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 MPA working pressure not less than one metre below ground level complete all as specified and as directed by Engineer-in- charge at site. Note:- the cost of HDPE pipe shall be deemed to be included in quoted rate.

Item No. 34 :- Supply & lay GI tubes Light grade with all fittings for passing of cables fixed to pole / wall / laid under floor or roads including all fixing accessories for protection of cable of following sizes complete all as specified and directed.

(a) 50 mm dia

(b) 25 mm dia

Item No. 35 :- Supply and laying testing commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed, steel wire/ strip armoured with multi staranded aluminium conductor, heavy duty conforming to latest relevant IS, including cable lugs in LT panel/MDB in building etc to suit the cable including material and labour for all plinth floors passing through pipes, fixed on wall etc, complete of following sizes:-

(a) 3.5 core x 50 Sqmm

(b) 3.5 core x 35 Sqmm

(c) 4 core x 16 Sqmm

(d) 4 core x 10 Sqmm

Item No 36 : Supply and fix Prestressed concrete poles, 9.0 metres long, 102mm x 152 mm at top and 102mm x 289mm at bottom, class 10 with necessary excavation, foundation and coping complete all as specified and directed. Note:- Earthwork, cement concrete etc. will be measured and paid under approprite items.

Item No 37 - S&F Juction Box for street Lights of size 300 x 250 x 150 mm made out of CRCA sheet 2 mm thick totally enclosed, dusst and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 42 protection single leaf shutter in front having proper locking aggangements, and painted with powder coating paint and suitable size of "connectwell" stud teriminal (provision for socket bolting) 05 Nos suitable for 415 volts, 50 Hz, 3 Phase 4 wire internal wiring system including MCB SP 06 amps - 01 No and mounted on security light pole with suitable bracket nuts, bolts complete all as specified.

Item No 38 :- S&F Energy saving new generation environmental friendly LED street light luminaire with long life versatile pressure die cast housing toughened glass and individual LEDs with secondary optics and IP 66 protection with high power LEDs as light source and electronic driver with warranty option of 5 years from date of installation of capacity 60 watts with pre wired and necessary mounting arrangements including provision of 4 sqmm three core copper conductor cable multi stranded from fitting to jnction box and necessary suitable GI Pipe medium grade braket of required dia 1.5 mtr long bend to required shape with suitable with MS clamps made out of flat iron of size 40 x 6mm - 02 sets, bolt & nuts complete all as specified and directed.

Item No. 39 :- Supplying, fabrication, installation and testing of LT panel out door type factory made CPRI approved water and vermin proof, protection of size 800 mm x 600 mm x 400 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 40X40X5mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizonatal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories all complete as specified and as directed. NOTE : Rate of earthwork and PCC work are deemed to be inclusive in this item.

OUTGOING (a) MCCB, adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 16 KA breaking capacity, rating 32 Amps including all fixing accessories with both ends spreader links - 01 Nos (b) Multifunctional Digial type timer switch (Astro type having longitude and latitude of indian cities memory) 240 Volts AC single phase - 01 No (c)Power contractor 32 amps 3 pole 415 Volts AC 01 No (d) Enamelled iron LT 1100 Volts danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm x 150 ,, white with letters, flgures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter.

Item No 40 : S&F for MCCB, adjestable thermal magnetic release type, 4 poles, 415 Volts, Ics =100% Icu, 16 KA breaking capacity, rating 40 Amps including necessary modification of existing LT panel bus bar connections accessories with both ends spreader link for accomodate the MCCB complete all as specified and directed.

Item No. 41 :- Dismantliing / Taking down existing LT UG cable any description with necessary excavation of earth work complete all as specified and directed.

Item No. 42 :- Dismantling / Taking down existing overhead line ACSR conductor of any description complete all as specified and directed.

Item No. 43 :- Dismantling / Taking down existing 06 mtr long GI octoganal street light pole of any description with necessary excavation of earth work and demolition of PCC foundation etc and deposting to MES store yard for safe custody for reuseb complete all as specified and directed.

Item No. 44 :- Dismantling / Taking down existing 09 mtr long PCC pole of any description complete all as specified and directed.

Item No. 45 :- Dismantling / Taking down existing security light fitting of any description with GI bracket and junction box complete all as specified and directed.

Item No. 46 :- Dismantling / Taking down existing cross arms of any description with GI bracket and junction box complete all as specified and directed.

Item No. 47 :- Fixing only FI octoganal street light pole obtained from item No 16 with necessary excavation of earth work, PCC work complete all as specified and directed. Note:- Excation of earth work, PCC for foundation, coping shall be measured and paid seperately.

Item No 48 : Fixing only serviceable LED Street light fitting with GI bracket, clamps, bolts & nuts obtained from item No 18 with necessary electrical connections from junction box to fittings terminal complete all as specified and directed.

Item No 49 : M & L for Earthing with 600x600x6.00 mm Galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5 m below ground level, connected to and including Galvanised steel Strip of size 32 x 6 mm by means of bolts, nuts and check nuts and washers of galvanised steel with and including 40 mm dia GI medium grade pipe for protection of GI strip to the extent of 7.5 metres as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical Plate No. 3 of SSR Part I (2009) including PCC foundation / chamber in mix 1:2:4 type B1 with M.S. angle iron frame, C.I. Cover with provision of locking arrangement and 20 mm dia light grade G.I. Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement, complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal of excavated material from the site complete all as specified and directed.

Note :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

Item No 50 : M & L for Earthing with 600x600x6.00 mm Galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5 m below ground level, connected to and including Galvanised steel wire of size 4.0 mm by means of bolts, nuts and check nuts and washers of galvanised steel with and including 40 mm dia GI medium grade pipe for protection of GI strip to the extent of 7.5 metres as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical Plate No. 3 of SSR Part I (2009) including PCC foundation / chamber in mix 1:2:4 type B1 with M.S. angle iron frame, C.I. Cover with provision of locking arrangement and 20 mm dia light grade G.I. Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement, complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal of excavated material from the site complete all as specified and directed.

Note :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

Item No 51 : Supply & fix for Galvanised iron wire of size 4.0 mm dia for earth contunity conductor or main earthing lead for security pole to pole as required complete all as specified and directed.

AREA DRAINAGE

Item No. 52 :- M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in foundations/ filling & mass concrete complete all as specified and directed.

Item No 53 : M&L random rubble masonry walling well bonded bedded solidly hearted uncoursed built in CM 1:6 complete all as specified and directed.

Item No 54 - M & L Hammer dressing to granite basalt / trap stone random rubble wall coursed/ uncoursed with maximum depression from a straight edge held against the surface not exceeding 40mm dressing complete all as specified and directed.

Item No 55 :- M&L Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete all as spcified and directed

Item No 56 :- M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Item No. 57 :- Extra for forming fair finished channel 30 cm inner girth in cement concrete using extra cement, including moulds mitred stopped ends etc, complete all as specified and directed.

Item No 58 :- M&L Brick work with Fly Ash bricks straight or curved on plan exc 6m mean radius built in CM (1:4) all as specified.

Item No. 59 :- Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Item No. 60 :- M&L for RCC (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall,beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

Item No 61 : M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete.

Item No 62 : Preparing of new plastered surface of wall and applying three coat of white wash complete all as specified and directed.

Item No. 63 :- M&L Formwork to soffits of suspended slabs such as roof slabs floor slabs, landing and similar work to rough finished surface of concrete not exceeding 200mm thick (horizontal or sloping complete all as specified and directed.

Item No 64 : Add / deduct for each 25 mm girth or part thereof over or under 30 cm complete all as specified and directed.

Item No 65 : Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

Item No 66 : Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Item No 67 : Dismantling fencing wire mesh, any type complete all as specified and directed.

SECURITY WALL

Item No. 68 : Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil complete all as specified and directed.

Item No 69 : Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm, not 250 sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed.

Item No. 70 : M & L MS round bars 10 mm dia and over cut to length, bent to shape required, including cranking, ending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Item No. 71 : M & L TMT Mild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Item No. 72 : Supply only PVC coated chain link of 3.16 mm dia MS galvanished fencing of mesh size 100 x 100mm as per 2721-1979 weight not exceeding 4.00 kg per sqm.

Item No. 73 : Fixing only PVC coated chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

Item No. 74 : M&L mild steel flat iron fillets for securing wire mesh etc. including all necessary drilling or riveting, etc. and similar work conforming to Fe 290 gde E- 165. complete all as specified and directed.

Item No 75 : S&F 12 mm dia of shank mild steel screw bolts (machine made) with hexagonal or squae heads at one end and screwd the other, each screwed end to be fitted with washers and one hexagonal or sqare nut, but length of bolt exc 10cm and n. exc 15cm long complete all as specified and directed.

Item No 76 : S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2.00mm dia bars at 75mm spacing and straining and fixing to any type of standard rails staining bolts, including, securing or typing at crossings with and provision of galvanised mild steel wire, stables or steel pins, etc. complete all as specified and directed.

Item No. 77 :- M & L two coat of aluminum painting over a coat of zinc chrome primer including prepartion of new steel surfaces of any description, necessary 10 cm in width or girth complete all as specified and directed.

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 17050.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)

ANIL KUMAR BISWAL

M/s Bapujee Builders and Traders

M/S S.K GHOSE