Tiruvannamalai City Municipal Corporation Replacement of 1st and 2nd Scheme Pumping main line at Thandrampattu Bridge Construction site in Tiruvannamalai City Municipal Corporation.

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete as per standard specification 350mm DI Pipe K7 WD-W0668

600mm DI Pipe K7 WD-W0673

Supply and delivery of following Ductile Iron Socket/ Spigot Pipes for Class K7 as per IS 8329/2000 pipes and specials including cost and conveyance of all materials and all labour charges etc., complete. 350mm dia Ductile Iron Pipes K7 -WD-M0625

600mm dia Ductile Iron Pipes K7 -WD-M0644

Supply and delivery of following Ductile Iron Specials as per IS 9523/2000 pipes and specials including cost and conveyance of all materials and all labour charges etc., complete. 350mm dia DI Collar WD-M0780

600mm dia DI Collar WD-M0781

350mm X 250mm dia DI Double Side Socket with Flanged Branch`Tee WD-M0780

600mm X 300mm dia DI Double Side Socket with Flanged Branch`Tee WD-M0781

350mm X 150mm dia DI Double Side Socket with Flanged Branch`Tee WD-M0780

600mm X 150mm dia DI Double Side Socket with Flanged Branch`Tee WD-M0781

350mm dia DI All Socket 90 Bend WD-M0780

600mm dia DI All Socket 90 Bend WD-M0781

250mm dia DI 90 Duckfoot Bend WD-M0787

300mm dia DI 90 Duckfoot Bend WD-M0787

250mm dia DI 90 Sover Bend WD-M0787

300mm dia DI 90 Sover Bend WD-M0787

250mm dia DI 1.50m D/F Pipe WD-M0670

300mm dia DI 1.50m D/F Pipe WD-M0671

Supply and delivery of DI D/F Gate (sluice) valves (soft seated) resilient seated soft sealing Gate Valves (Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or GGG 50, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 14846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 and with 5 years warranty 250mm dia D/F Gate Valves WD-M1202

300mm dia Kinetic Air Valves WD-M1203

Supply and delivery of following Kinetic Air Valves for Handling more Volumes of Air in Pumping main, Double Ortfice Kinetic Air Valve Comfirming to IS 14845 Tamper Proof design (PN-1) amd with 5 Years warranty including cost and conveyance of all materials and all labour charges etc., complete. 150mm dia Kinetic Air Valves WD-M1120

Supply of 20mm dia and above x 90mm to 120mm length fully threaded bolts and with nuts 2 Nos. WD-M0590 DI Pipe and Specials

Supply Rubber Inserting Sheet 3 Ply WD-M0591 350mm DI Pipe Specials

600mm DI Pipe Specials

Dewatering using 3HP to 70HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete. Hire charges for Diesel Pump set for 5 HP

Jointing C.I/ D.I-S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants. (including cost of jointing materials) including cost and conveyance of all materials and all labour charges etc., complete. 350 mm dia C.I/ D.I-S/S pipes and specials WD-W0314

600 mm dia C.I/ D.I-S/S pipes and specials WD-W0318

Jointing C.I/ D.I double flanged pipes and specials with rubber insertion or any equivalent to the required specifications with M.S. bolts and nuts etc., complete including charges for special tools and plants such as air compressor and helmets and sheet piles. etc (including cost of jointing materials). 150 mm dia C.I/ D.I Double flanged pipes and specials WD-W03426

250 mm dia C.I/ D.I Double flanged pipes and specials WD-W0344

300 mm dia C.I/ D.I Double flanged pipes and specials WD-W0345

Lowering of D.I Pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TWAD Officers.350 mm dia C.I/ D.I pipes and specials D-W0251

600 mm dia C.I/ D.I pipes and specials D-W0254

Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10 stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. TNDSS NO: 30&86 350mm dia DI Socket and Sipgot Pipes

600mm dia DI Socket and Sipgot Pipes

Reinforced Cement concrete M20 grade1:1/2 :3 (one part of cement one and half part of sand and three part of aggregate )using 20mm gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of TMT rod, centering , struuting but including cost of mixing placing the concrete in postion vibrating cosolidating finishing and curing the concrete etc complete complying the standard specifications. 30 V, VI (S5) VII & 13 350mm dia DI Socket and Sipgot Pipes

600mm dia DI Socket and Sipgot Pipes

Refilling trenches with exacavated soil in layers not exceeding 20cm in depth, ramming and consolidation of each layer, watering etc. all complete as per standard specification and as directed by the departmental Engineer. - WD-W0705 350mm DI Pipe K7 WD-W0668

600mm DI Pipe K7 WD-W0673

Provision for Pipe Clamps and Welding charges ete., complete as per directed by Corporation Engineer LS

Add GST 18%

SHREE KRISHNAA AND CO (BID ID -1275855)