Construction of 02 Nos. Residential Quarters for Judicial Magistrate at Court Complex Billawar.

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm and upto 1.5m in depth, 1.5m in width as well as 10sqm on plan) including disposal of excavated earth as directed by the Engineer-in-charge including all leads and lift. a) All kind of soils

Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth upto 1.5mtr. including disposal of excavated earth as directed by the Engineer-in-charge including all leads and lift. a) All kind of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in: (including all leads and lifts carriages of material by MT/HL)

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) 40mm nominal size crushed

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate) 20mm nominal size crushed.

Providing and laying in position of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level (including all leads and lifts carriages of material by MT/HL)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation plinth in cement mortar 1:6 (1 cement : 6 fine sand) (including all leads and lifts carriages of material by MT/HL)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation plinth in cement mortar 1:4 (1 cement : 4 coare sand) (including all leads and lifts carriages of material by MT/HL)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (including all leads and lifts carriages of material by MT/HL)

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Extra for Half-brick masonary in superstructure above plinth level upto floor V level (including all leads and lifts carriages of material by MT/HL)

Providing and laying Reinforced cement concrete 1:1.5:3(1 Cement: 1.5 Coarse Sand: 3 graded crushed stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircases having upto 15° slope excluding the cost of centering & shuttering. All works upto Floor V level. a) 1: 1.5: 3 (1 Cement: 1.5 Coarse Sand: 3 graded crushed stone aggregate 20 mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. a) Cold twisted bars.

Centering and shuttering including strutting, propping etc. and removal of form work for:-

Foundations, footing, bases of columns etc for mass concrete.

Suspended floors, roofs landings balconies and access plate form.

Columns, pillars,piers, abutments,posts & struts.

Edges of slab and breaks in floors and walls under 20cm wide.

Lintels, beams, plinth beams girders, bressumers and cantilevers.

Stair (Excl.landings)except spiral staircases.

Weather shade, chajjas, corbels etc. incl.edges.

Filling available excavated earthwork (excluding rocks) in trenches , plinth, sides of foundation etc. in layer not exceeding 20 cm in depth : consolidating each layer by ramming and watering , lead upto 50 mts, lift 15 mts).

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete.

Providing and laying Damp Proof Course 50mm thick with cement concrete 1: 2 : 4 (1 Cement : 2 coarse sand : 4 graded crushed stone aggregate 12.5mm nominal size) floor (including all leads and lifts carriages of material by MT/HL)

Brick edging 7 cm wide 11.4cm deep to plinth protection with bricks of class designation 75mm including grouting with cement mortar 1:4 (1 cement : 4 fine sand) (including all leads and lifts carriages of material by MT/HL)

6mm cement plaster to ceiling of mix 1: 3 (1 Cement:3 Fine sand) (including all leads and lifts carriages of material by MT/HL)

15 mm cement plaster on rough side of single or half brick walls of mix 1: 6 (1 cement: 6 fine sand) (including all leads and lifts carriages of material by MT/HL)

12mm cement plaster on brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) (including all leads and lifts carriages of material by MT/HL)

15mm cement plaster 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall (including all leads and lifts carriages of material by MT/HL)

Making of grove 12mm x 10mm between brick and RCC (including all leads and lifts carriages of material by MT/HL)

Providing 10cm / 7cm thick and 5 cm / 5.7cm projected string course with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lungs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately a) Sal wood.

Providing 40x 5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30 x 10 x 15 cm 1 : 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Providing and fixing 35mm thick panelled or panelled and glazed shutter for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excl. panelling which will be paid for separately, all complete as per direction of engineer-in charge Second Class Deodar wood:

Providing and fixing paneling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or paneled and glazed shutters 25mm to 40mm thick. a) Plain Particle board 12mm thick flat pressed, 3 layer or graded wood particle board medium density grade I, IS:3087 marked

Making Khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1: 2:4 (1 cement: 2 coarse sand : 4 graded stone agg.20mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement rounding the edges & making and finishing the outlet complete (including all leads and lifts carriages of material by MT/HL)

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 10 kg/ sqm (4mm thick) float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors windows and clerestory windows with hinges and necessary screws: ISI marked M.S. pressed bright finished butt hinges with necessary screws of required size Second Class Deodar wood:

Providing and fixing of aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws complete : a) 250x16mm

Providing and fixing aluminum hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS1868) transparent or dyed to required colour or shade with necessary complete Single rubber stopper.

Providing and fixing aluminum casement stays ISI marked anodized (anodic coating not less than grade AC 10 as per IS1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete

Providing and fixing aluminum pull bolts lock anodized ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws bolts nuts and washers etc. complete

Providing and fixing IS:3564 marked Aluminium die cast body tubular type universal hydraulic door closer, best make of approved quality embossed on the body, door weight upto 35 kg and door width upto 700 mm with necessary accessories and screws etc. complete

Providing and fixing aluminum tower bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

(ii) 100 x 10mm

Providing and fixing M.S. grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. a) Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and laying 18mm thick Granite of any colour and shape (area of slab upto 0.5 Sqm) gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels (including all leads and lifts carriages of material by MT/HL)

Extra for providing edge moulding to 18mm thick Granite stone counters, Vanities etc. over item No. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.

Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counter and similar location in marble stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Extra for nosing in steps and tread of kota stone slab.

Providing and laying / fixing ceramic glazed floor tiles 300 x 300mm (thickness to be specified by the manufactures) of first quality conforming to IS : 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, Ivory, Grey Fume Red, Brown laid on 20mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete (including all leads and lifts carriages of material by MT/HL)

Providing and fixing 1st quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy bottle green, black or any size as approved by Engineer- in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30 kg per sqm including pointing in white cement mixed with pigment of matching shade complete (including all leads and lifts carriages of material by MT/HL)

Providing and laying vitrified premium quality floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make of Kajaria / Somany Brand S&P Brown /Grey in colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with matching Epoxy etc. complete (size of tile 60x60cm) as per direction of Engineer-in-charge (including all leads and lifts carriages of material by MT/HL)

Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes of 110mm diameter.

Providing and fixing on wall face unplasticised-PVC moulded fitting / accessories for unplasticised- rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion :-

Coupler 110mm

Single tee with door 110x110x110mm

Bend 87.5x110mm

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats).

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets. 25mm dia (heavy type).

Making plinth protection 50mm thick cement concrete 1:3:6 (1 cement : 3 course sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth crushed (including all leads and lifts carriages of material by MT/HL)

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work.

Construction brick measonery man hole in cement motor 1:4 (1 cement: 4 Coarse Sand) R.C.C top slab with 1:2:4 mix (1 cement: 2 Coarse Sand: 4 graded stone aggrigate 20 mm nominal size) foundation concrete aggrigate 40 mm Nominal Size, in side palstering 12mm thick with cement mortor 1:3 (1 cement:3 Coarse sand) finshed with floating coat near cement and making channels in cement concrete 1:2:4 (1 cement:2 Coarse snad:4 graded stone aggirgate 20mm nominal size) finished with floating coat of neat cement complete as per standard design. inside size 90cmx80cm and 45cm deep including cast iron cover with frame (light duty) 455x610mm internal dimensionals. total wt. of cover and frame to be not less than 38kg (wt. of cover 33kg and wt.of frame 15kg) with F.P.S bricks of class designation 75 (crush stone aggrigate) (including all leads and lifts carriages of material by MT/HL)

Constructing masonry Chamber 60 x 60 x 75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chain lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. (With F.P.S. bricks) (including all leads and lifts carriages of material by MT/HL)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, star, Lotous or equivalent having valid ISI license) (1000 ltr. Capacity 15 No.).

Making soak pit 2.5m diameter 3.0 M deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75mm and S.W. drain pipe 100mm diameter 1.8 m long complete as per standard design with FPS bricks.

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Stone aggregate below(Crusher Bajree) 40mm size from Billawar crusher for an average lead of 3.00 Km. by M.T. b) Sand from Billawar crusher for an average lead of 3.00 Km. by M.T. c) Bricks from Hiranagar for an av. lead of 70.00 Km. by M.T

Vinod Kumar

8 BOUNDARIES BUILDERS PVT LTD

RANJIT SINGH

Raman Kuma

Tilak Raj Sharma