84725SPECIAL REPAIRS TO BITUMINOUS HARD STANDING IN AGNIBAAZ OFFICERS MESS HQ 41 ARTY DIV AND SPECIAL REPAIR TO EXTERNAL AND INTERNAL ROAD AT 6 QUEENS GARDEN UNDER GE (NORTH) PUNE.

Amount

Scarifying and picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and exc 50 mm and n exc 100 mm in depth and removing the same to a distance n exc 50 m and stacking complete all as specified and as directed.

M&L for Water Bound Macadam (WBM) 7.5 cm (consolidated thickness) with coarse aggregate (63mm to 40mm size) spread, rolled and consolidated to gradient and camber required with granite trap or basalt type aggregate 8 to 12 ton power roller complete all as specified and as directed.

M&L for preparing of unsurfaced water bound macadam /scarifying surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat using paving bituminous primer VG-10 at 7.5 kg per 10 Sqm complete all as specified and as directed.

M&L for Premix bituminous macadam (consolidated thickness 75 mm or less) with 4 % binder content by weight of total mix using bitumen VG-30 laid, rolled and compacted to required gradient and camber with 8 to 12 tonne capacity power roller by using hot mix plant & mechanical paver complete all as specified and as directed.

M&L for preparing of unsurfaced water bound macadam /scarifying surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat using paving bituminous primer VG-10 at 2.5 kg per 10 Sqm and providing bituminous premix asphaltic semi-dense concrete using paving bitumen (VG-30 grade) ,30 mm thick (consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix) using mechanical paver rolled with 8 to 12 tonne power roller and compacted to required camber and gradient to an uniform smooth surfaces complete all as specified and directed.(Note : Quantity of bitumen shall be provided as per design mix approved by GE.)

M&L for preparing of unsurfaced water bound macadam /scarifying surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat using paving bituminous primer VG-10 at 2.5 kg per 10 Sqm and providing bituminous premix asphaltic semi-dense concrete using paving bitumen (VG-30 grade) , 40 mm thick (consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix) using mechanical paver rolled with 8 to 12 tonne power roller and compacted to required camber and gradient to an uniform smooth surfaces complete all as specified and directed.(Note : Quantity of bitumen shall be provided as per design mix approved by GE.)

M&L for precast cement concrete Kerb stone with PCC type-C-1 (1:3:6) using 20 mm stone aggregates including weathering slightly rounded or chemfered angles or throating etc and laid dry complete all as specified and as directed.

M&L for panting new suraface of PCC Kerb stones with two coats of synthetic enamel paint over one coat of primer including preparation of new surfaces complete all as specified and as directed.

M&L for moorum or red bajri (spread thickness 75mm thick) spread, rolled, watered and consolidated to gradient and camber required as in side berms complete all as specified and as directed.

M&L for repairs to pot holes any depth and not exceeding 1.00 sqm each including sweeping free from dust and mud or water, scouring sunken surfaces in roads, paths etc., cutting around edges to at least 25 mm in depth, making good by applying a tack coat with bitumen primer (VG-10) @ 5 Kg per 10 Sqm, putting in premixed bitumenous macadom, well rammed and and sealed with binder @ 9.80 Kg (VG-30) per 10 Sqm binded with 0.09 cum of stone chipping 6.3mm size and again well rammed (including supply of premixed bitumen macadam binder and chippings) laid with mechanical paver, rolled & compacted in required gradient and camber with 8 to 12 ton power roller complete all as specified and as directed.

M&L for preparation of black top surfaces of road and applying 3 mm thick retro-reflective thermoplastic road marking paint, as lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm width, by mechanical machine, white or golden yellow including putting glass beads of standard size by drop method complete all as specified and directed by Engineer-in-Charge.

S&F high intensity ABS Plastic road stud of size varying from 100x100x20mm to 110x90x17mm and colour of body amaber, red or white, two way reflective 180 degree and fixing of stud with approved high intensity thermoplast adhesive bond & nailing the same on specified section of the road with MS anodised pin of standard pattern of manufactures 8 x 37mm long including cutting making holes on road for proper fixing of the same complete all as specified and as directed.

SHREE KALIKA CONSTRUCTION

Sunshine Ventures

R K Enterprises

MANISH VEDPRAKASH ARORA