RENOVATTION OF CFC BUILDING AT IA BEGRAJPUR DISTT MUZAFFARNAGAR

Amount

Dismentaling doors/Windows including chaukhats with hold fast and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 mtr.

Dismentaling of Cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60m.

Scraping of old white or colour wash including disposal of refuse as directed by the Engineer-in-charge within a distance of 60m.

Supply and Fixing 6 mm China white glazed tils in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials labour and tools and plants.

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Granolithic marble Dado 2cm thick consisting of 15mm thick layer of one part cement, 2 parts of approved coarse sand including 5 mm thick surface coat with ordinary cement black or white or grey or mixed marble chips passing 3mm. but retained on 15mm mesh screen in proportion of 1:2 as specified or directed by the Engineer-in-charge and polished by hand or machie and finally finished with French Mansion Polish or any other approved polish including suppl of all materials, labour. tools and plants etc. required for proper completion of work.

100mm thick (Avg.) mud phaska of damped brick earth on roofs laid to slope consolidated and plaster with 25mm thick mud mortar mixed with Bhusa at 35Kg/ Cum. of earth and gobri looping with mix 1:1(1clay and 1cow duungs) and covered with Ist class flat tiles bricks grouted and pointed with cement mortar 1:3(1cement :3 fine sand) mixed with 2% of Integral water proofing compound by weight of cement and finished neat.

White washing one or more coat including supply of all materials labour Tools & Plants etc. required for proper completion of work. Three Coats

Distempring (first coat) with Oil bound distemper of approved brand and manufaucture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufaucture Such as Berger, J&N, Shalimar, Asian Paint after thorughly brushing the surface free from mortar dropping and other foriegn matters and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all materials labour Tools & Plants etc. required for proper completion of the work But for every coat after the first coat.

Finishing wall with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials labour Tools & plant etc. required for proper comletion of work. For Weather Coat:- Same as item but over previously painted surface weather coat For Weather Coat.

Providing cement primer on old and new surface.

Providing wall putty on old surface with approval quality material of berger /JK/ Birla or similar make 2 coats.

Teak wood wrought framed and fixed including simple mouldings straight work as in chaukhats including supply of all materials labour Tools & Plants etc. required for proper Completion of the work.

Supply & Fixing of 3.2 cm thick fully glazed laminated window-shutter of commercial quality ISI marked plywood including cost of fitting and glass pannels (Double Leaf)

Supply & Fixing of 3.2 cm thick fully glazed laminated window-shutter of commercial quality ISI marked plywood including cost of fitting and glass pannels (Singal Leaf)

Supply & Fixing of 3.8 cm thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges bolts locks handles spring and or other fittings.

Supply & fixing Galvanized mosquito proof heavy quality S.S. wire gauge heavy quality over windows and including supply of Teak wood batten 8x1 cm flat iron 25x4mm and including supply of necessary screws all materials labour Tools & Plants etc. required for proper completion of work. Indian commercial flush shutters 35mm thick (Excluding all cost of all fittings)

Supply & fixing of 3.8cm thick teak wood door and windows- shutters with panels of heavy Quality galvanized iron wire gauge 2.5mm or 2mm or 1.5mm mesh or any other size with necessary beadings including supply and fixing of wooden cleats stops and including fixing of wooden cleats stops and including fixing & adjustment of hinges bolts locks handles spring and or other fittings but excluding their supply and including two coat of black japan on all iron fittings if necessary. Fitting with neccessary screws to be supplied Departmentally.

P/Fixing wooden moulded beading to door and windows frames with iron screws plugs and priming coat on unexposed surface etc. complete. IInd Class Teak wood 50x20mm

P/Fixing teak wood batton for fixing of mosquito net and fixing of glass & over choukhet at door and windows including cost of all materials labour & T&P etc. complete.

P/F 12mm thick & 100mm wide Ply-board of Plywood pelmet with 19mm dia Aluminium rod and brackets including fixing with 25x3 MS flat 10cm long and plg etc. complete with painting polishing or oiling as required.

MS or iron work of small sizes and section such as holding down bolts, hold fast such as MS Grill/ Stair case railing gates etc. complete work.

Poviding and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with form diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 38mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Providing and fixing 1mm thick M.S. sheet door with frame of 40 x 40 x 6 mm angle iron and 3.15 mm Thick M.S. gusset plates at the junctions and corners,including supplying and fixing of all necessary fittings, Loock rail of 15" length of oxidixed iron & including pintals , hooks at the top end including applying a priming coat of approved Lead paint.

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: Size 250x10mm

Size 150x10mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size 125 mm Long

Size 100mm Long

Providing and fixing 1st marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Size 75x45x3.2 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: Size 300x16 mm

Providing and fixing lSl marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: Size 300x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: Size 250 x 100 mm

Size 150x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete: Size 125 mm long

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete: Size 125x65x2.12 mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin Rubber Stopper

Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality).

P/F Glass panes with teak wood beading in doors and windows as desired by the Engineer in Charge including cost of all materials fittings hinges labour T&P all etc. required for proper completion of work.

Polishing with French polish or wax polish (in proportion 2 bees wax: 1. linseed oil : 1turpentine oil :0.5 varnish by weight) on new wood and wood based surface to give an even surface including cleaning the surface of all dirt dust and sand prepared smooth and a coat of wood filter including supply of all materials labour Tools & Plants etc. required for proper completion of the work.

Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Painting or Varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials labour Tools & Plants etc. required for proper completion of the work. Paint to be used ISI Marked.

One coat hot coaltar on new surface including supply of all materials labour Tools & Plant etc. required for proper completion of the work.

Painting or varnising work in small areas or new wood work with one coat (upto one square of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all mateials labour Tools & Plants etc. required proper completion of the work. Paint to be used ISI marked.For every coat after First coat.

Painting or varnising work in small areas or new iron work with one coat (upto one square of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all mateials labour Tools & Plants etc. required proper completion of the work. Paint to be used ISI marked.

Excavation in foundation in ordinary soil (loam clay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30m. from the foundation trenches (Where machine can not move)

Cement concrete approved Coarse sand and 4cm gauge approved stone ballast in the proportions of 1:4:8foundation and under floors including supply of all materials, labour and T& P etc. required for proper completion of work.

M-150 Brick work in 1:4 (one cement & four coarse sand)in foundation and plinth including supply of all materials labour Tools & Plants etc. required for proper completion of work

R.C.C. work with cement approved coarse sand and 2 cm. Gauge approved stone grit in proportions of 1:1.5:3in RCC T Beam and RCC Column excluding spply of reinforcement and its bending but including its fixing and binding the same with 24BWG G.I. binding wire and including neccessary centering and shuttering etc. and supply of all materials labou tools & Plants etc. required for proper completion of the work including cost of binding wire. The ate excludes making of drip course which shall be paid extra.

2 cm thick cement plaster plaster in dado or skirting in 1:2 consisting of one part of cement & two part of apprioved coarse sand laid in panels finished with 3mm floating coat of neat cment or cement mixed with marble dust in ratio 5:1 including supply of all materials labour Tools & Plants etc. required for proper completion of the work.

Granolithic Marble without base concrete flooring 4 cm thick consisting of 2 cm thick layer of 1 part cement, 2 parts of approved coarse sand and r parts of 2 cm graded approved stone chips including 5 mm thick surface coat with ordinary cement black and white or grey or mixed marble chips passing 3mm but retained on 1.5 mm mesh screen in proportion of 1:2 as specified or directed by the engineer in charge and polished by hand or machine and finally finished with French Mansion Polish or any other approved polish including supply of all materials, labor and T & P etc. required for completion of the work. Excluding GST

Mild steel (Tor steel or Plain) in plain work such as R.C.C. or R.B workincluding bending for proper shap and including supply of steel & its wastage bend hooks and authorised overlaping shall ba measured and including cost of binding wire.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat lid vwith C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. ISI Marked Kajaria Equivalent Indian Made Brand

P/F 8 mm Dia CP/SS Jet with flexible tube upto 1mtr long with S.S triangular plate to European type W.C of quality and make as approved by Engineer Incharge.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White glazed earthen ware (Indian Type) / Neycer WC pan 580mm dia

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS 2556, Cl. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required: Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern.

Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: A) White Vitreous China Wash basin size 630x 450 mm with a pair of 15mm C.P. Brass pillar taps.

Providing and fixing Stain less steel A ISI 304 (18/8) kitchen sink as per IS 13983 with Cl. brackets,& Stainless steel plug 40 mm including painting the fittings and brackets, cutting and making good the walls wherever required: A) Kitchen Sink with Drain Board 510 x 1040 mm boulded 250 mm

P/S PVC Waste Pipe for sink or wash basin including PVC waste fittings complete. 32 mm/40 mm Dia long

P/F Brass stop bib cock ISI marked approved quality as per direction of Engineer in charge. (A) 15 mm nominal bore

(B) 20 mm nominal board

P/F Brass stop cock ISI marked approved quality as per direction of Engineer in charge. (A) 15 mm nominal bore

(B) 20 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked (Syntex or equivalent) with cover and suttable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer in charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. A) 15 mm dia nominal bore outer dia

B) 20 mm dia nominal bore outer dia

C) 25 mm dia nominal bore outer dia

P/F CP Brass Angle valve for basin mixture and geyser points of approved quality conforming to IS :8931. A) 15 mm dia nominal bore

S/F CI Cover without frame for manhole A) 560 mm dia. CI cover (Heavy duty) the Weight of the cover to be not less than 108 Kg

Providing and fixing square-mouth SW. gully trap class SP-1 complete with C.l. grating brick masonry chamber with water tight C.l. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150x100 mm P type With common burnt clay (non moduler) bricks of class -150

P/F in position Precast RCC Manhole Cover and Frame of rquired shape and approved quality. A) Heavy Duty circular shape 500 mm Internal Dia

Providing and fixing ball valve (brass) ofISI Marked approved quality complete, High & low pressure, with plastic floats complete as per direction of Engineer in charge. A) 15 mm Dia Nominal Bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement trenching ,refihling & testing of joints complete as per direction of Engineer in Charge. External work. i) 100 mm Dia Nominal Bore outer dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

P/F Soil, Waste & Vent Pipes 100 MM Dia Centrifugal Cast Iron Pipe

Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand): A) 100 mm dia

Supply & Fixing C.P. Brass Waste Jali for Wash Basin

Providing and fixing gun metal gate valve with Cl. wheel of approved quality (screwed end): 25mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion. 110mm dia bend

Supply & Fixing PVC Socket 100 mm dia

PVC Pipe 110 mm dia ISI Marked

Insttallation of Submersible Pump Boring 150 dia bore hole including labuar, T & P etc. required for proper compelete of the work

Lowring 110 dia mm PVC pipe in bore hole including labuar, T & P etc. rquire for proper compelete of the work

Providing and fixing 100 mm dia PVC pipe 6KG/cm2.

Shrounding and packing graded coarse sand in between bore wall & the Strainer including supply of coarse sand, labour, T&P ete required for proper compeletion of work.

Providing and fixing G.I. pipe 32 mm dia Nominal bore compelete with G.I. Fitting.

Submersible pump kirlosker/crompton or equivalent 2 HP I.S.I marked.

Single fase stater for submersible of I.S.I marked.

2.5 mm Sq cable for submersible moter pump.

4 Inch dia MS clamp made with 32 X 5 mm flate iron with nut & bolt

100 mm dia & P.V.C end cap.

Solution for jointing P.V.C pipe. 250 gram

32 mm C.P.V.C pipe

Developing of bore well by over pumping and back washing till the discharge is free from turbidity not greater then 20 p.p.m. after 20 minutes of starting of pump including hiring charges of pump set, labours, T&P complete required of completion of work.

Nylon cloth for strainer including plastic rope,cutting holes in PVC pipe etc complete.

Dismantaling reinforce cement concrete or reinforced brick work including stacking of Materials as directed by the engineer in charge within a distance of 60 Mtr (200 feet)

Dismantaling existing plaster including disposal of refuse as directed by the engineer in charge with in distance of 60 meter (200 Feer)

M.S. ( tor steel or plain) in plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its Wastage, bend, hooks and authorised overlapping shall be measured and including cost of binding wire

12 mm thick plaster with cement and Coarse sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1.00 cm including supply of all materials, Labour, tools & Plants etc. required for proper completion of the work

R.C.C. Work with cement, approved coarse sand & 2 cm guage approved stone grit in proportions of 1:2:4 in lintels of door & Windows excluding supply of reinforcement and its bending , but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including neccessary centering and shuttering etc and supply of all materials, labour, Tools & Plants etc required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra

Construction of ramp, stainless steel handrail, grill & techtile tiles etc complete for disabled persons as per direction of engineer in charge.

Providing, Laying & Fixing PVC coduit pipe with electrical wire and electrical fitting including electric box, M.C. Panel Box, As per requirement of site and direction of engineer in charge etc. complete