Design/ Providing/ Fabrication/ Fitting/Installation/ testing and commissioning of 11KV HT panel for 4 Nos 500 KW/670HP ,150000 GPH X 250 mtr Head HT pumping Unit of HT Pump House under State Capex budget

Amount

Design/ Providing/ Fabrication/ Fitting/Installation/ testing and commissioning of 11KV HT panel for 4 Nos 500 KW/670HP ,150000 GPH X 250 mtr Head HT pumping Unit of HT Pump House Sitlee. The HT Panel should be of indoor type VCB switch board to run with existing 500 KW/670 HP HT 11KV ( BHEL make) Slip ring motor, LRS and Capacitor Panel and comprising of 2 Nos Incomer Panel, one No bus coupler Panel and 5 Nos out going Panel, AC board ,DC board, battery bank of suitable capacity, HT cables and earthing of panel from original equipment manufacturer. The job also includes the dismantling of existing panel and AMC of panel for three years. 11KV OUT GOING MOTOR PANEL FOR 500KW/ 670 HP HT MOTOR . The outgoing motor Panel should be of indoor VCB type for HT motor with motor operating system complete with temperature scanner ,protection relays and all associated equipments and match with exiting system along with other accessories ( All material should be of CG/ABB/SIEMENS/ SCHINDER make) as per I.S Standard (5 Nos).The panel should be fitted with existing capacitor panel and also make necessary arrangement to isolate it. The panel should fitted with 3 core 120 sq mm armored HT AL cable from Panel to Motor terminal box = 20 mtr, 3 core 250 Sq mm armored HT Al Cable from LRS to Rotor/motor terminal box (2x10 mtr)=20 mtr each for one unit including termination kit.(The total cable is required for 4 Nos Unit.) 11KV INCOMER MOTOR PANEL FOR 500KW/ 670 HP HT MOTOR . The outgoing motor Panel should be of indoor VCB type for HT motor with motor operating system complete with temperature scanner ,protection relays and all associated equipments and match with exiting system along with other accessories ( All material should be of CG/ABB/SIEMENS/ SCHINDER make) as per I.S Standard (2 Nos). The panel should fitted with 3 core 400 sq mm armored HT AL cable out door type from Pole to Panel box = 25 mtr each for one incomer including termination kit. The total cable is required for 2 Nos incomers. 11 KV BUS BAR COUPLER PANEL FOR 500KW/ 670 HP HT MOTOR The Bus bar coupler Panel should of indoor VCB type complete with and associated equipment and accessories. ( All material should be of CG/ABB/SIEMENS/ SCHINDER make) as per I.S Standard (1 Nos). Complete Job

Major Electricals

SUNIL KUMAR SURI CONTRACTOR

Energy Management Centre