GF 2023-24-Periyanaickenapalayam1

Amount

Dismantling Existing damaged plain cement concrete including cost of all labour charges etc., complete as per standard specification.

Earth work excavation for Drain and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B

Plain Cement Concrete 1:4:8 Mix (one part cement, Four part sand and Eight part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29mm height for plane surfaces in all floors with cross bracings using mild steel sheets of size 30cm x 55cm and 10 gauge stiffened welded with mild steel sheets of size 25mm x 25mm x 3mm for boarding and laid over silver oak (country wood). Joists of size 10cm x 6.5 cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc complete complying with standard specification

Plain Cement Concrete 1:3:6 Mix (one part cement, three part sand and six part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications.

Centering for soffits of RCC slab for plain surface like lintels, beams etc., including strutting 3m height using mild steel sheet of size 90cm x 55cm and B4 10 stiffened with MS angles of size 25mm x 25mm x 3mm laid over silver Oak joists of size 10cm x 6.5cm (spaced atabout 90cm c/c) and supported by casurina props of 10cm – 13cm dia spaced of 75 c/c complying including all charges etc., complete as per standard specification. TNDSS NO: 30&86

Supplying, Fabricating and placing in position TMTsteel bars for all reinforced cement concrete items of work including cost of steel transporting straightening cutting, bending, cranking binding welding etc. Including cost of binding wire MS.chairs laps to fix the reinforcement in all positions, all labour and materials complete as per TNDSS NO: 86

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.as per TNDSS NO: 30

Finishing the top of flooring with granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete.

Removal of excavated exess earth to convience from work site including loading unloading and transporting charges to 1Km lead including all other incidential charges etc.complete

SAHA VINAYAGA ASSOCIATES