CONSTRUCTION OF MULTIPURPOSE HALL AT SPORTS COMPLEX, KATRA

Earth work in excavation over area (exeeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth and lift upto 1.5 m,disposed earth to be levelled and neatly dressed incl. levelling of ground for a lead of 1.0 m in all 70% AKS and 30 % O.R.

itemH129

itemH130

Providing and laying in position cement concrete (1:4:8) 40 mm stone agg. excluding the cost of centering and shuttering , all works upto plinth level with crushed stone aggregate, including all costs and carriages of all materials involved.

Providing and laying in position machine batched and machine design M-25 Grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement , including admixtures recommended proportions as per IS: 9103 to accelerate, retard setting of concrete improve workability without imparing strength and durability as per direction of Engineer incharge. Note: Cement in this item is @ 330kg/cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.

All Work upto plinth level

All Work above plinth level

Providing and laying in position cement concrete (1:3:6) excluding the cost of centering and shuttering , all works upto plinth level with crushed stone aggregate, including all costs and carriages of all materials involved.

Providing and laying in position cement concrete 1:2:4 excluding the cost of centering and shuttering , all works upto plinth level with crushed stone aggregate, including all costs and carriages of all materials involved.

Brick work with common burnt clay FPS (non modular) bricks of class designation 75 in foundation and plinth in cement motar1:4 Brick work up to plinth level

Extra for brick works in super structure above plinth level up to floor level.

Half brick masonary with bricks of class designation 75 in foundation and plinth in cement mortar 1:4

Extra for half brick masonary in superstructure above plinth level upto floor V level.

Reinforcement for R.C.C. work including straighting cutting ,bending,placing in position and binding all complete(tmt bars) FE- 500

Filling available excavated earth mixed with boulders almost 50% in trench ,plinth sides of foundation etc layers not exceeding 20 cm in depth consolidation each layer by ramming and watering lead up to 50 mtr and lift up to 1.5 mtr.

Supplying & filling, in plinth with fine sand under floors incl. watering, ramming, consolidating & dressing complete.

Supply chemical emulsion in sealed containers including delivery as specified. Chlorophriphos/Lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): Treatment of soil under existing floor using chemical emulsion (chlorophriphos/Lindane E.C 20% with 1% concentration) @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:32

Making plinth protection 50 mm thick of cement concrete 1:3:6 using 20 mm nominal size of stone aggregate over 75 mm thick bed of dry brick ballast 40 mm nominal size , well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth.

Providing ans laying damp-proof course 50 mm thick with cement concrete 1:2:4 using 20 mm nominal size of stone aggregate and curing complete.

Centering and shuttering including strutting, proping etc. And removal of form for

foundations, footings, bases of columns etc. For conc.

walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, landings, balconies and access platform

Lintels beams, plinth beams, girders, bressumers and cantilevers

Columns, pillars, piers, abutments, posts and struts

Edges of slabs and breaks in floors and walls

Stuctural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved stel primer all complete( welded)

Providing and installing prefabricated sandwich PUF Panel comprising of on two faces PPGL (galvalume) colour coated 0.5 mm TCT Sheet and CFC free close cell, high denisty (40 +_ kg/m3) having a thermal conductivity value of 0.0023 w/mk and of required thickness sandwiched between the two galvalume sheets, the outer and inner galvalume sheet of 0.05 mm TCT steel 550 Mpa shall have a coating mass of 150 g/sqm. zinc aluminium alloy coating total of both sides as per AS- 1397 And finished with 20 microns colour coated of SMP polyester quality paint as per AS/NZS-2728:1997 (Catory-3) over a 5 micron primer on exposed side over a 5 microns primer, The panels should be of required length and required width with maximum width uo to 1190mm with tongue & groove configuration The prefabricated panels shall be fixed directly to the girth using self-drilling fasteners, The metal sheet shall confirm to IS: 513 AS- 1397& 2728, The poltruthane insulation shall confirm ti IS: 12436, The rate include cost of flashing/ridges/ corner pieces/hips etc, made of 0.5 mm TCT PPGL (Galvalume) steel sheet in required shape and size including all accessories required to complete the work, The rate of the item is inclusive of all materials, erection accessories, incidental charges, cost of dash fasteners etc cost of making provision for doors, windows, ventilators. and concealed pipes, conduits and sanitary appliances etc. and other payment finished puf sand witch panels shall be measured upto half centimeters for calculating area uptp two places of decimal,. No deduction shall be made for openings uptp 0.20 sqm. and made for wastages. Rate including Gutter and flashing nothing paid extra

Cement plaster (in fine sand) 1:4 (1 cement : fine sand) 15 mm thick

6 mm thick plaster to ceiling of mix 1:3

providing and fixing factory made µpvc white colour sliding glazed windows upto 1.50 m in height dimension comprising of upvc multichampered frame with in built roller track and sash extruded profiles duly reinforced with 1.60+ 0.2 mm thick galvanised mild steel section made from roll forming process of required length upvc extruded glazing beads of appropriate dimension all complete job. 9.149D3

providing and fixing factory made µpvc white colour casement/casement cum fixed glazed Door comprising of upvc multichampered frame, sash and mullion extrudedprofiles duly reinforced with 1.60+ 0.2 mm thick galvanised mild steel section made from roll forming process of required length upvc extruded glazing beads of appropriate dimension all complete job. (9.149C.2)

Providing and fixing of Aluminium work

Providing and fixing of Aluminium work for Doors, windows and ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with dash fastener of reqd. dia and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc Aluminum snap beading for architectural drawings and the directions of Engineer in charge(glazing, panelling and dash fasteners to be paid for separately) powder coated

for shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required incld. The cost of EPDM rubber/ neoprene gasket required

Providing and fixing 12 mm thick prelaminated particle board/pvc paneling flat pressed three layer or graded wood particle board in panelling fixed in aluminum doors, windows shutters and partition frames with cp brass/stainless steel screws etc. Complete , pre-laminated particle board with decorative lamination on both sides.

providing and fixing stainless steel adjustable friction windows stays of approved quality with necessary stainless steel screws etc. To the side hung windows as per direction of engineer in charge - 205× 19mm

providing and fixing round shape handle of outer dia. 100mm with ss screws etc. Complete as per the direction of engineer in charge (powder coated minimum thickness 50 microns aluminum)

providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles for aluminum doors incld. Necessary cutting and making good etc. Complete.

providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 transparent or dyed to required colour or shade with necessary screws etc. Complete: 250× 10 mm

providing and fixing aluminum handles ISImarked anodized transparent or dyed to required colour and shade with necessary screws etc. Complete.

providing and fixing aluminum hanging floor door stopper, ISI marked, anodized transparent or dyed to reqd. Colour or shade with necessary screws etc. Complete : single rubber stoper

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. With EPDM rubber/neoprene gasket etc. Complete with float glass panes of 4.0 mm thickness

Providing and laying vitrified floor tiles in different sizes(thickness to be specified by manufacturer )with water absorption less than0.08% and conforming to Iis:15622 of approved make in all colours and shades ,laidcon 20mm thick mortar 1:4 (1 cement :4 coarse sand )including the joints with white cement and matching pigments etc. complete.(size of tile 60x 60cm)

Providing and fixing first quality ceramaic glazed tiles conforning of Iis:13755 of minimum thickness 5mm ofapproved make like NITCO, ORIENT,SOMANY,KAJARIA or equivalent make in all colour , shades except burgyndy,bottle green,black of any size as approved by Engineer In charge in skirting,riser of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm

Providing and applying white cement based putty of average thickness 2mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth

Applying primming coat with primer of approved brand and manufacture, having low VOC Content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Finishing walls with water proofing cement paint of required shade.new work (two or more coats) applied @ 3.84 kg/10sqm

Distemper with oil bound washable distemper of approved brand and manufacture on wall surface.new work (two or more coats )over and including primming coat with cement primer.

Providing and laying 18 mm thick solid hard maple wooden flooring, factory pre-finished with UV lacquer, tongue and groove interlocking, fixed with approved sdhesive and nails on leveled plywood base, including finishing, polishing and cleaning complete.

Providing and laying of brick bat koba under layer of water proofing cement plaster with fibre mesh covered with layer of cement plaster mortar mixed with approved water proofing chemical including all carriages at site complete job.

Providing gola 75X75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm down gauge) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design. In 75 x 75 mm deep chases.

Providing and fixing G.I pipes complete with G.I Fittings including trenching and refilling etc. (external work)

15 mm nominal dia

20 mm nominal dia

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the wall etc. internal work exposed on wall)

15 mm nominal dia

20 mm nominal dia

Providing and fixing pvc pipes for waste water / rain water disposal

100mm dia

75mm dia

providing and fixing pvc bends

75 mm dia pipe

100 mm dia pipe

:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design inside size 90x80 cm and 45 cm deep including C.I cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) with F.P.S bricks with class designation 75 and with crushed stone aggregate.

Providing and fixing soap tray

Carriage of material by mechanical transport

Sand average lead 40 km by m.t.

Coarse aggregate av. lead 40 km by m.t

WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. - Group-C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. Mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4.00 sq. mm + 1 X 4.00 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm Conduit.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required (Make: - Legrand (Mylinc) / Havell's (Coral)

5/6 A switch Modular

Modular Switch 15/16 Amp.

3 pin 5/6 A socket outlet Modular

Modular Socket 6 pin 15/16 Amp.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (Make: - Legrand (Mylinc) / Havell's (Coral)

3 Module (100 mmX75 mm)

4 Module (125 mmX75 mm)

Supplying and Fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

MCCB, MCB & DB's

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Make: - Havell's/ ABB/ Schinder/ Legrand/ L&T) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: - ABB/ Schinder/ Legrand/ L&T)

Single pole

Single pole and neutral 63 Amp.

Installation, Testing and Commissioning Supply,Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required

High bay LED lights or linear high bay lights 200-300 lux for recreational play to 750-1000 lux for professional or competition play (150 Watt)

LED Tube fitting 20 Watt 4 feet long. (Batten 4')

Supply,Installation, testing and commissioning of Ceiling Fan Rod maximum 10 feet long

EARTHING

Supply of Chemical earthing (G I electrode earthing) with 50 mm dia and 2.4 Mtr long with heavy duty pre galvanised pipe. The Electrode should be pre-galvanised with 60-8- microns of 2.5 mm thickness wall. The G I Electrode shall be pre filled with Cristaline conductive material (CCM). The inner strip should be 32 X 6 mm with two holes of 10 mm each on the top. The GI Electrode shall be surrounded with 50 Kg (Back Fill Compound) to provide maximum contact between the electrode and Back Fill Compound. The Back Fill Compound should be eco-friendly and NABL approved Lab tested. GI Electrode earthing should be maintenance free and dose not required regular manual addition of watewr. GI Electrode should be made as described in IS 3043, IEEE-837 etc standards. Installation should be done as per the manufacturer Guideline and as per IS3043 Standards (By Soil treatment Process). Main Hole Cover for Earthing Pit. Excavation of earthing pit, placement of electrode in the pit surrounding of electrode with Chemical compound pouring of water around the electrodes to convert the chemical compound into gel. Filling of pit and ramming complete job for installation of Chemical earthing.

GI Strip 25X5 (For connection Earth pit to Equipments)

Supply and laying of 8 No. SWG GI wire.(For connection Earth pit to Equipments)

Main Panel.

CABLING