Construction of 100-Bedded Government SC/ST Welfare Hostel in the Campus of G.D. College, Begusarai.

BILL OF QUANTITY

BUILDING DIVISION BEGUSARAI

Name of Work :- Construction of 100-Bedded Government SC/ST Welfare Hostel in the Campus of G.D. College, Begusarai.

Estimated Cost :- ₹ 46,631,941.00 BOQ issued to:-

Earnest Money :- 932,700.00 Address :-

Cost of B.O.Q :- 10000.00 Reg. No :-

Time of Completion :- 09 Months Signature of issuing of

S.N. S.O.R CODE NO. ITEMS OF WORK QUANTITY UNIT RATE AMOUNT 1 2 3 4 5 6

1 2 3 4 5 6 7 Building Work Campus Dev. & A/Road R.W.H Work P.H.E Fire Fighttinh Furniture

1 2.32 Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 3382.100 100 m2 697.40 23,587.00 496.65 2885.45

2 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1240.879 cum 360.70 447,585.00 1150.22 34.398 56.26

3 2.27.1 Extra for every additional lift of 1.5 m or part thereof in all kind of soil etc. all complete jobs. 287.555 cum 49.40 14,205.00 287.56

4 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 728.578 cum 123.90 90,271.00 728.58

5 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 3385.755 cum 287.30 972,727.00 779.18 2596.91 5.652 4.02

6 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l. 1060.267 sqm 283.30 300,374.00 1024.68 8.800 26.79

7 11.73 Providing designation 100 A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 817.900 sqm 444.80 363,802.00 817.900

8 4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

(i) 4.1.3 1:2:4 (1 Cement :2 coarse and:4 graded stone aggregate 20 mm nominal size) 76.704 cum 3998.10 306,670.00 71.81 0.880 4.02

(ii) 4.1.2 1:1.5:3 (1 Cement :1.5 coarse and:3 graded stone aggregate 20 mm nominal size) 122.685 cum 4420.80 542,366.00 122.685

9 5.33A Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete.

(i) 5.33A.1 All work upto plinth level 373.973 cum 4756.90 1,778,952.00 367.33 1.602 5.04

(ii) 5.33A.2.1 All works above plinth level upto floor V level . Walls columns, pillars, posts cind struts 88.536 cum 5293.50 468,665.00 88.54

10 5.33A.2.2 All works above plinth level upto floor V level. Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. 317.209 cum 5677.20 1,800,859.00 317.21

11 5.33B.1 Add or deduct for providing richer or leaner mixes respectively at all floor levels. Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. 773.076 cum 164.50 127,171.00 773.08

12 5.9 Centring and shuttering including strutting,propping etc. and removal of form for.

(i) 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 324.731 sqm 211.60 68,713.00 216.20 32.810 75.72

(ii) 5.9.3 Suspended floors, roots, landings, balcnies and access platform. 1401.244 sqm 437.50 613,044.00 1401.24

(iii) 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 1062.426 sqm 404.70 429,964.00 1062.43

(iv) 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts 997.140 sqm 494.40 492,986.00 997.14

(v) 5.9.7 Stairs,(excluding landings) except spiral-staircaces. 116.063 sqm 439.90 51,056.00 116.06

(vi) 5.9.16.1 Edges of slabs and breaks in floors and walis- Under 20 cms wide 311.400 m 130.20 40,544.00 311.40

(vii) 5.9.19 Weather shade,Chajjas, corbels etc. including edges 94.331 sqm 550.90 51,967.00 94.33

(viii) 5.9.4 Shelves (Cost in situ) 155.239 sqm 437.50 67,917.00 155.24

13 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

i 5.22.7A Thermo-Mechanically Treated bars TMTC-500- 8 mm dia. 11265.160 KG 94.50 1,064,558.00 10823.06 80.100 362.00

ii 5.22.7B Thermo-Mechanically Treated bars TMTC-500- 10 mm dia. 21687.330 KG 92.60 2,008,247.00 21646.13 41.20

iii 5.22.7C Thermo-Mechanically Treated bars TMTC-500- 12 mm dia. 21646.130 KG 90.80 1,965,469.00 21646.13

iv 5.22.7D Thermo-Mechanically Treated bars TMTC-500- 16 mm dia. 21646.130 KG 91.70 1,984,950.00 21646.13

v 5.22.7E Thermo-Mechanically Treated bars TMTC-500- 20 mm dia. 21646.130 KG 91.70 1,984,950.00 21646.13

vi 5.22.7F Thermo-Mechanically Treated bars TMTC-500- 25 mm dia. 10823.060 KG 91.70 992,475.00 10823.06

14 O362C Supply of Brick Bats for recharge pit etc….. Do all complete job 5.487 cum 1263.36 6,932.00 5.487

15 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 27.885 cum 4819.90 134,403.00 12.030 15.86

16 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement 11.600 cum 203.60 2,362.00 11.600

17 6.1.14.C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in etc. Cement mortar 1:6 (1 cement: 6 coarse sand 454.610 cum 4923.00 2,238,045.00 454.61

18 6.3C Extra tor Brick work in superstructure above plinth level upto floor V cum 349.111 cum 842.20 294,021.00 349.11

19 6.45.2 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand) 705.712 sqm 700.80 494,563.00 705.71

20 6.21A Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks) 705.712 sqm 113.60 80,169.00 705.71

21 13.24.2 6 mm cement plaster to ceiling of mix :1:4(1 cement: 4 coarse sand) 1580.853 sqm 125.60 198,555.00 1580.85

22 13.11.4 12 mm cement plaster of mix:1:6(1 cement: 6 coarse sand) 3630.025 sqm 141.50 513,649.00 3493.66 136.37

23 13.12.2 15 mm cement plaster on rough side of single or half brick wall of mix.1:6 (1 cement: 6 coarse sand) 2013.764 sqm 176.40 355,228.00 2013.76

24 13.26 Neat cement punning over plaster surface etc. 378.064 sqm 40.50 15,312.00 230.09 11.600 136.37

25 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth 107.397 sqm 436.60 46,890.00 107.40

26 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 119.330 M 1087.90 129,819.00 119.33

27 10.15.2.1 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile - C 252.920 M 432.60 109,413.00 252.92

28 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness(weight not less than 10kg/sqm) 206.370 sqm 809.30 167,015.00 206.37

29 21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) . Anodised aluminium

(anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) . Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 754.830 sqm 386.10 291,440.00 754.83

30 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

(i) 9.48.1 Fixed to steel windows by welding 3095.550 kg 144.50 447,307.00 3095.55

(ii) 9.48.2 Fixed to opening/wooden frames with rawl plugs screws etc. 453.250 kg 161.10 73,019.00 453.25

31 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 6.708 sqm 6303.40 42,283.00 6.71

32 10.17 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. 100.000 EACH 174.60 17,460.00 100.00

33 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 561.600 kg 546.80 307,083.00 561.60

34 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 20 to 25 mm thick 530.305 sqm 1252.70 664,313.00 530.30

35 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. 626.924 sqm 1638.80 1,027,403.00 626.92

36 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3(1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm 87.864 sqm 1334.90 117,290.00 87.86

37 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm 70.754 sqm 1191.80 84,325.00 70.75

38 11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab. 270.900 M 82.90 22,458.00 270.90

39 11.32 Extra for Kota stone / sand stone in treads of steps and risers using single up to 1.05 metre.length 53.535 sqm 18.10 969.00 53.54

40 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 70.475 sqm 686.80 48,402.00 70.47

41 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 292.215 sqm 795.00 232,311.00 292.21

42 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade 33.240 sqm 4242.90 141,034.00 33.24

43 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) 3rd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) 4th course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). 51.318 sqm 480.60 24,663.00 51.32

44 22.8.1 Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. After two days of proper curing applying a secoung coat of cement slurry admixed 0.00

45 22.8.1 with proprietary water proofing compound conforming to IS : 2645. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 1 cement: 4 coarse sand admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge With average thickness of 120 mm and minimum thickness at khurras point to be 65 483.506 sqm 850.70 411,319.00 483.51

46 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete 20.000 EACH 189.40 3,788.00 20.00

47 13.116 Forming groove of uniform size in the top layer of washed stone grit piaster as per approved pattern using wooden batten nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charges. 450.000 M 47.10 21,195.00 450.00

48 9.21.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 93.522 sqm 1641.50 153,516.00 93.52

49 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured) 93.522 sqm 401.40 37,540.00 93.52

50 10.29 Providing and fixing bright finished brass peg stays 300 mm long of minimum weight 330 gms.to side hung steel windows with necessary welding and machine screws etc. complete. 314.000 EACH 182.70 57,368.00 314.00

51 9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws,the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 143.550 M 433.40 62,215.00 143.55

52 9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm,out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. 0.00

53 9.142.1 & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel,all complete as per manufacturer’s specification and direction of Engineer-in-charge. 45.675 sqm 3305.50 150,979.00 45.68

54 9.96 Providing and fixing aluminium door Fittings, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: Sliding Door Bolt 0.00

55 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: Sliding Tower Bolt 0.00

56 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm Handles 70.000 EACH 57.10 3,997.00 70.00

57 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 0.00

i 9.101.1 Twin rubber stopper 70.000 EACH 60.80 4,256.00 70.00

58 13.80.A2 Providing and applying white cement based putty of average thickness 2 sqm 46.50 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 5074.507 sqm 105.40 534,853.00 5074.51

59 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: 2013.761 sqm 38.60 77,731.00 2013.76

60 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade. New work (two or more coats ) over and including priming coat with cement primer 5074.507 sqm 102.30 519,122.00 5074.51

61 13.79.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade. New work (three or more coats) 2013.761 sqm 81.20 163,517.00 2013.76

62 13.81 Applying priming coat

(i) 13.81.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) 271.440 sqm 39.70 10,776.00 271.44

(ii) 13.81.3 With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works 493.411 sqm 34.60 17,072.00 493.41

63 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work. Two or more coats on new work. 764.851 sqm 84.50 64,630.00 764.85

64 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

65 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

(A) 12.79.1 Coupler

(B) 12.79.4 Single tee without door

(D) 12.79.6 Shoe plain

66 12.80 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete

67 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 13.000 EACH 4470.90 58,122.00 13.000

68 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid 4.000 EACH 4230.00 16,920.00 4.000

69 17.7.8 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers 17.000 EACH 3694.30 62,803.00 17.000

70 17.10.2.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board , 610 x 510 mm bowl depth 200 mm 2.000 EACH 3786.60 7,573.00 2.000

71 17.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe, 40 mm dia 43.000 EACH 104.40 4,489.00 43.000

72 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern 9.000 EACH 3723.20 33,509.00 9.000

73 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm 17.000 EACH 857.00 14,569.00 17.000

74 17.33.1 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 17.000 EACH 713.30 12,126.00 17.000

75 17.73.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 170 gms 29.000 EACH 397.30 11,522.00 29.000

76 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.

77 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall

78 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

ii 18.17.3 40 mm nominal bore. 5.000 EACH 707.30 3,537.00 5.000

79 18.19.3.2 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore , Vertical 5.000 EACH 1049.20 5,246.00 5.000

80 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 60.000 EACH 434.20 26,052.00 60.000

81 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore 20.000 EACH 715.10 14,302.00 20.000

82 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 46.000 EACH 594.80 27,361.00 46.000

83 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore 17.000 EACH 500.40 8,507.00 17.000

84 18.21.1 Providing and fixing uplasticised PVC connection pipe with brass ions. 30 mm Length. 65.000 EACH 74.80 4,862.00 65.000

85 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 4.000 EACH 299.40 1,198.00 4.000

86 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter 16.000 EACH 190.10 3,042.00 16.000

87 19.30.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line :

19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 10.000 EACH 4266.80 42,668.00 10.000

88 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)

(i) 18.46.2 20 mm dia nominal bore 2.000 EACH 185.60 371.00 2.000

(ii) 18.46.3 25 mm dia nominal bore 3.000 EACH 265.90 798.00 3.000

(iii) 18.46.4 32 mm dia nominal bore 4.000 EACH 306.00 1,224.00 4.000

(iv) 18.46.5 40 mm dia nominal bore 9.000 EACH 419.70 3,777.00 9.000

89 N/S Supplying fitting fixing 2 H.P submersible Water pump with starter cables etc…. Do all necessary fitting etc….. Do all complete job. 1.000 set 25000.00 25,000.00 1.000

90 18.58.2.1 Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid. 150 mm nominal size square,18 mm high with 100 mm dia of the inner hinged round grating. 44.000 EACH 169.70 7,467.00 44.000

91 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 17.000 EACH 96.80 1,646.00 17.000

92 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 16000.000 litre 9.70 155,200.00 16000.000

93 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.

94 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 2.000 EACH 33603.40 67,207.00 2.000

95 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level All types of soil 300 mm dia 120.000 M 486.80 58,416.00 30.000 90.000

96 24.3.1 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge 100 mm nominal size dia 80.000 M 660.10 52,808.00 80.000

97 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia 40.000 M 673.50 26,940.00 30.000 10.000

98 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge 7.000 cum 1195.60 8,369.00 3.000 4.000

99 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 2.000 cum 1195.60 2,391.00 2.000

100 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge 6.000 cum 1343.20 8,059.00 6.000

101 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:150 mm dia 1.000 EACH 210.70 211.00 1.000

102 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 12.000 Hour 916.80 11,002.00 12.000

103 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.150 mm clamp 1.000 EACH 1531.40 1,531.00 1.000

104 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 150 mm dia 1.000 EACH 281.80 282.00 1.000

105 3 a) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)

b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.

c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.

d) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

e) Suitable cement concrete foundation duly plastered and with anti vibration pads.

106 7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

107 9.1 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal 3.000 Set 7245.00 21,735.00 3.000

108 10.2 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel 1.000 Set 5722.00 5,722.00 1.000

109 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required.

110 12.6 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 150 MM Dia 1.000 Set 22316.00 22,316.00 1.000

111 13 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 3.000 Set 1236 3,708.00 3

112 14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

113 15 Providing, installation, testing and commissioning of stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

114 16.1 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gunmetal 3.000 set 5206.00 15,618.00 3.000

115 17.1 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. "Connections from riser with 25 mm dia stop gun metalvalve & M.S. Pipe and socket."30M 3.000 Set 7920.00 23,760.00 3.000

116 18.1 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required . Gunmetal 4.000 Nos. 2393.00 9,572.00 4.000

117 19.3 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required. 3 way-150 mm dia M.S. Pipe 1.000 Set 9071.00 9,071.00 1.000

118 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 1.000 Set 17707.00 17,707.00 1.000

119 24.2 Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size,100 mm dia 1.000 Set 44496.00 44,496.00 1.000

120 N/S Providing and fixing CO2 extinguiser consisting of seamless MS cylindrical body squeeze lever dishcharge valve, internal dishcharge tube, 30cm long high pressure discharge hose , discharge nozzle ISI marked capacity 4.50 Kg 15.000 Set 7200.00 108,000.00 15.000

121 N/S Providing and fixing storege multi purpose fire extinguisher consisting of welded M.S cylindrical body squeeze lever discharge valve, 30cm long high pressure dishcharge hose ISI marked capacity 6 kg 15.000 Set 5600.00 84,000.00 15.000

Furniture Works

122 N/S Single Metal Bed (Without Mattress) with 8mm Ply on mattress area-|Bed SIZE(IN MM): 2000 X 900 x 650 mm. MATERIAL : METAL. Bed frame made up of mild steel heavy duty. The frame joints are all mig welded and grounded for better finish. The frame to be powder coated. The Product Should be Certified Company BIFMA,ISO- |50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC 100.000 Each 11000.00 1,100,000.00 100.000

123 N/S Mattress 2" thick (Size75"x36") Supplying and fixing of Mattress (Size75"x36"x2) at site. The Product should be green guard. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified. 100.000 Each 4400.00 440,000.00 100.000

124 N/S SLOTED ANGLE RACK * (L)900MM X (D)450MM X (H)2MTS SLOTTED ANGLE RACKS WITH 7 PANELS ANGLE : 40 X 40 X 2MM PANELS: 20 GAUGE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 1.000 Each 9682.00 9,682.00 1.000

125 N/S Study Table - TABLE TOP IN 18MM THICK PRELAMINATED BOARD WITH UNDERSTRACTURE MADE OF POWDER COATED SINGLE UNIT WITH METAL MESH SHELF FOR BOOKS TABLE SIZE: 700MML X 450MMD X 740MMH. * SCRATCHPROOF EASY WIPE TOP * METAL SHELF & WIRE SHELF WITH BAG HOOK * DURABLE ,STRONG & SAFE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 100.000 Each 6125.00 612,500.00 100.000

126 N/S Study Chair - CHAIR SIZE: 355MML X 381MMD X 780MMH. FIBER SEAT* SCRATCHPROOF EASY WIPE TOP SUPPORTED WITH UNDERSTRACTURE MADE OF POWDER COATED. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 100.000 Each 5370.00 537,000.00 100.000

127 N/S Dining table-Size : 2400L x 1200W x 740Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. (Table Top PLPB should be in round corner). The Product should be green guard. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified 5.000 Each 20300.00 101,500.00 5.000

128 N/S Stackable Café Chair : Size: (L)381mm X (D)419mm X (H)839mm Seat and back in PVC Moulded Chair with SS 202 grade frame Round Pipe. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 40.000 Each 1800.00 72,000.00 40.000

129 N/S High Back Chair Size (Back Height-670xBack Width-470)mm & (Seat Depth-485xSeat Width-475)mm with Min-Max Height (460-540)mm. Nylon base chair with push back mechanism & Fix handle. Nylon base chair with push back mechanism. Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star chrome base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. Color-Black 1.000 Each 6608.00 6,608.00 1.000

130 N/S Table with side unit return- Table Size(1500x750x750)mm with 25 mm thk top & Side runner Size(750x450x750)mm with 25 mm thk. Table made of 25 mm thk pre lam particle board with edge banding. Table top supported with 25 mm side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Wenge.The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC 1.000 Each 25429.00 25,429.00 1.000

131 N/S 3 Seater Chrome Chair Length 1775mm x Depth 690mm x Height 755mm 1)Seat & back single section 2)Seat is 410 mm from ground 3)Perforated mild steel powder coated 4)Seat thickness 1.2 mm 5)Seat width 520 mm 6)Beam MILD steel with black power coating thickness 1.6mm 7) Mild steel border with chrome plating for every seat & back 8) Mild steel handles chrome plated & die pressed legs at the end of chairs 9) Gross weight of regular 3-seater will be 31 kg. 3.000 Each 10620.00 31,860.00 3.000

132 CARRIAGE OF MATERIALS

(ii) Coarse Sand (Lead-150 Km) from koilwar 762.568 cum 1436.29 1,095,269.00 695.13 52.755 4.462 10.22

(iii) Stone Chips (Lead - 40 Km) from Hathuwa Rack 851.231 cum 1647.13 1,402,088.00 732.04 109.190 2.145 7.86

133 EXTRA COST OF MATERIALS

135 Total SOR+DSR = ₹ 35,688,922.00

137 CORRECTION FACTOR @.982 ON SOR& DSR (ON S.NO.135) = ₹ 35,046,521.00

5 Year's Maintenance work ₹ 1,227,118.00

Grand Total :- ₹ 41,305,512.00

Electrification Work

Part A - E.W & E.I

1 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

Battten Holder 129

Down Lighter 56

Ceiling Fan 122

2 1.31 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc. as required. 71 Each 414.00 29,394.00

3 1.32 Supplying and fixing suitable size of G.I. box with modular plate and cover in front or in surface or in recess including providing and fixing 6 pin, 20/16 amps modular socket outlet and 20/16 amps modular switch. connection, painting etc, as required. 22 Each 531.00 11,682.00

4 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 330 p. mtrs. 309.00 101,970.00

5 1.55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 110 Each 632.00 69,520.00

6 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1200 p. mtrs. 201.00 241,200.00

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(For St. Light) 120 p. mtrs. 201.00 24,120.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (for Multi point) 1650 p. mtrs. 246.00 405,900.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire (For SPN DB) 40 p. mtrs. 422.00 16,880.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire 340 p. mtrs. 660.00 224,400.00

1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire 120 p. mtrs. 1,312.00 157,440.00

7 1.33 Supplying and fixing 2 pin, 6 amp. ceiling rose on the existing junction box/PVC box including connection etc as required. 275 Each 64.00 17,600.00

8 1.34 Supplying and fixing batten/angle holder including connection etc. as required. 129 Each 80.00 10,320.00

9 1.25 Supplying and fixing stepped type electronic Fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. 123 Each 358.00 44,034.00

10 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar, din bar inerconnections, powder painted including earthing etc. as reqd.(But without MCB/RCCB/Isolator)

2.8.6 8 way, Double door 3 each 2591.00 7,773.00

11 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs)

2.33.3 8 ways , Double door, I/C 160 A, MCCB 3 Each 15,057.00 45,171.00

12 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type 23 Each 4,184.00 96,232.00

13 2.12 Supplying and fixing following rating, 240/415 volts, ‘C’ series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6/32 amps, single pole 294 Each 237.00 69,678.00

14 2.13 Supplying and fixing following rating, 240/415 volts, ‘C’ series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.13.1 6/32 amps, double pole 3 Each 667.00 2,001.00

2.13.4 40 A to 63 A, Four Pole (For TPN DB) 23 Each 2,324.00 53,452.00

15 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thrmomagnetic release and terminal spreaders in existing panel board including drilling holes in cubicle panel, making connections etc. as required.

16 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

17 5.1 Supplying and fixing 4' X 18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 136 Each 521.00 70,856.00

18 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

19 6.1 Supplying and fixing of following types lamp in the existing electrical fitting / fixtures etc. as required.

6.1.5 12 watt LED lamp 34 Each 239.00 8,126.00

6.1.6 15 watt LED lamp 95 Each 250.00 23,750.00

20 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 24 P. sqft. 1,809.00 43,416.00

21 1826 Supplying of copper strip of 50mm X5mm size for bus bar strip/interconnection including drilling holes etc. as required 10 P kg 871.00 8,710.00

22 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1 Each 6,536.00 6,536.00

23 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

24 3.6 Earthing with Copper earth Plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe 2.7 meter long etc. with charcoal/ coke and salt as required. 2 P. Set 13,721.00 27,442.00

25 3.17 Supplying & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc as reqd. 20 P. mtr. 144.00 2,880.00

26 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

27 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 12 Each 1,038.00 12,456.00

28 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

29 7.3 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required but excluding sand cushioning and protective covering.

7.3.3 Above 95 sq. mm and upto 185 sq. mm 60 p. mtrs. 143.00 8,580.00

30 8.16 Supply and installation of regular/standard model A.C. ceiling fan of 1400 mm sweep with service value (CM/MM) minimum 4.10, Air delivery minimum 245 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 122 each 2838.00 346,236.00

31 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

32 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required. 60 Each 34.00 2,040.00

PART B - LIGHTING ARRESTER

33 4.1 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 3 mm thick copper baseplate includingholes etc.complete as required. 8 Each 1,056.00 8,448.00

34 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 48 Each 81.00 3,888.00

35 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 120 Meter 102.00 12,240.00

36 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 50 Meter 145.00 7,250.00

37 3.2 Earthing with G.I. earth plate 4.5 meter long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe etc. with charcoal/ coke and salt as required. 8 P. Set 6,323.00 50,584.00

38 4.14 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. 40 Each 174.00 6,960.00

PART C - FOR SOLAR PHOT VALTAIC POWER GENERATION SYSTEM

39 DSR Supply, Installation, Testing and Commissioning of orgrid solar Photovoltaic Power Plant conforming to MNRE specification as amended, cousisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protection, earthing, mounted on Aluminium/GI structure of suitable strenght with following components coupletes as required:- (a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, Conforming to IS 14286/IEC 61215, IS/IEC 6170-Part-1, IS/IEC 6170-part-2, Solar Photovoltaic Module conversion efficiency shall not be less than 16.5% PV moules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. (b) Power conditioning Unit (PUC) of 350-800 V CD Imput voltage range and 400 V AC, three phase, 4 wire, 50HZ +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. (c) Data Monitoring System complete with accessories. (d) Fixing of Array junction box & Main junction box with IP 65 portection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. (e) Lighting and surge voltage protection. (f) Connections and interconnections by supplying & fixing required size XPLE insulated copper conductor 1.1 kv grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. 12 Each 61,060.00 732,720.00

PART D - FOR CCTV

40 NS SITC of 2MP IR Builet Fixed Camera - 1/2.8" Progressive scan CMOS, 1920 X 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F 1.2, 0 Lux with IR, ICR, ONVIF (PROFILES), support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reductio, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67 Edge Anlaytics- Line crossing detection, Intrusion delection, Video tamering, UL, CE, FCC certified. (DS-2CD3021G0-I (2.8mm) (Approved Makes: HIK vision/Honeywell/Bosch) 8 Nos 6,875.00 55,000.00

41 NS SITC of 2MP IR Indoor Dome Fixed Camera - 1/2.8" Progressive scan CMOS, 1920 X 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F 1.2, 0 Lux with IR, ICR, ONVIF , support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reductio, Triple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlaytics- Line crossing detection, Intrusion delection, Motion detection, Video tamering, UL, CE, FCC certified. (DS-2CD3121G0-I (2.8mm) (Approved Makes: HIK vision/Honeywell/Bosch) 8 Nos 6,050.00 48,400.00

42 NS SITC of 2MP IR Outdoor PTZ Camera - 1/2.8" Progressive Scam CMOS, 1920 X 1080 at 60fps, 4.8 mm to 153 mm, 32XOptical, 16X ditital zoom, color: 0.005 Lux at F1.6, B/W: 0.001 Lux at F1.6, ICR, ONVIF, support H.265, MJPEG, 120 db WDR, 3D Digital Noise Reduction, HLC, BLC, Defog, EIS, Tripple individually configurable stream, 24 VAC & Hi PoE, IR range: 150m, Pan: 360˚ endless, Tilt: From - 15˚ to 90˚ (auto-flip), Pan Speed - from 0.1˚/s to 160˚/s, Preset Speed: 240˚/s, Tilt Speed - from 0.1˚/s to 120˚/s, Preset Speed: 200˚/s, Presets- 300, Alarm Input-2-ch alarm input, Alarm Output-1-ch alarm Output, Audio-1 channel input & output, Support on-board storage up to 256 GB (SD card not included), IP66, IK10, Face Detection, Region Entrance Detection, Line Crossing Detection, Region Entrance Detection, Region Exiting Detection, UL, CE, FCC certified. (HI-PoE Injector under Si Scope, if PoE is used)(Model no DS-2DE7232IW-AE (Camera) + DS-1602ZJ (wall mount Bracket) or DS-1602ZJ-pole (Vertical Pole Mounting Bracket)) (Approved Makes: HIKvision/Honeywell/Bosch)Equivalent 1 Nos 68,750.00 68,750.00

43 NS SITC of Surveillance class Common Micro SD Card 128 GB for camera. (ANR-Automatic Network Replenishment) (Approved Makes: HIKvision/Honeywell/Bosch)/Equivalent 17 Nos 1,760.00 29,920.00

44 NS SITC of 64ch Network Video Recorder- Connect UP to 64 IP cameras, Dual OS, Up to 12 Megapixels Resolution, Two independent HDMI outpuls, one HDMI output of 4k resolution, 1 VGA outut with outut upto 1920 X 1080, Support H.265, MJPEG, Supports N+1 hot spares system, supports RAIDO, RAID 1, RAID5, RAID6 and RAID 10, Supports HDD hot swap, Supports Dual Power-Redundanl, Incoming Bandwilh 320 Mbps, 8 SATA Hard Disks, ANR Technology,, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 6 TB. 3 X USB at least 1 X USB with 3.0 Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10/100/1000 Mbps self-adaptive Ethernet Interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified. (DS-7764NI-I8) (Approved Makes: HIKVision/Honeywell/Bosch) 1 Nos 96,800.00 96,800.00

45 NS SITC of 6 TB Surveillance Hard Disk (ST 6000VX0023) (Approved Makes: HIK Vision/Honeywell/Bosch) 2 Nos 14,850.00 29,700.00

46 NS SITC of 16 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af, IEEE 802.3at, PoE port, Uplink ports (DS-3 e0326P-E) (Approved Makes: HIK Vision/Honeywell/Bosch) 1 Nos 10,450.00 10,450.00

47 NS SITC of 24 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af, IEEE 802.3at, PoE port, Uplink ports (DS-3 e0326P-E) (Approved Makes: HIK Vision/Honeywell/Bosch) 1 Nos 20,735.00 20,735.00

48 NS SITC of 8 port Managed Network PoE Switch: 1 Nos 12,650.00 12,650.00

49 NS SITC of Video Management Software - FOC- SOFTWARE 1 Nos 110,330.00 110,330.00

50 NS SITC of Server or high end PC for Video Management Software 1 Nos 93,500.00 93,500.00

51 NS SITC of 32" LCD 24X7 Survelliance Monitor 1 Nos 43,780.00 43,780.00

52 NS SITC of Cat-6 Cable: UTP CAT 6, 305 meter, Core diameter: 0.53mm, OFC, CM, White (Aproved Makes: HIKVision/Honeywell/Bosch) 1000 Mtrs 33.00 33,000.00

53 NS Smart-UPS On-Line, 5.4 kw/6kva with 1 hour Backup 12 V 65 AH SMF Battery UPS Toplogy Double Conversion On-Line, Power Rating (VA / Watts) 5400 watts/6000VA, Form Factor Rack/Tower Convertible; Output Power Capacity 5400 watts/6000 VA, Max Configurable Power 5400watts/6000VA, Nominal Output Voltage 230V, Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage, Efficiency at Full Load 94.00% Output Voltage Distortion Less than 3%, Output Frequency (sync to mains) 50/60 Hz +/03 Hz, crest Factor 03 : 01, Wave form Type Sine Wave, Output Connection (1) Hard wire 3-wire (8) (H N + G) IEC 320 C 13(8), Bypass Built-in Bypass, Output Short Circuit Protection Yes, Parallel Redundancy (Option) 1 + 1, Nominal Input Voltage 230 V, Input Power Factor>0.98, Input Frequency 40-70 Hz, Input Connections Terminal Block, Protection Thermal Circuit Breaker (250VAC/20A), Input voltage range for main operation full load 160-285V, High Voltage withstand Capability 420 VAC, Green Mode Range 210-250 VAC (230 V), Battery Type Mintenance -free sealed Lead-Acid battery with suspended, electrolyte. 12V 65 Ah SMF battery for 60 Min Battery Back-up. 1 Nos 284,500.00 284,500.00

PART - E FOR CAMPUS LIGHT

54 8.22 Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation)

55 9.16 Providing and making of following sizes octagonal street light pole foundation in reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) of specified size including PVC conduit, form work, curing, reinforcement, excavation and refilling etc. as required.

9.16.2 For 6/7 metre pole (500mm X 500mm X 1400mm) 12 each 4398.00 52,776.00

56 5.15 Supplying & fixing following types LED Flood light with minimum efficacy 100 Im/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc. on pole/building including connection earthing the body etc. As reqd.

57 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (Heavy duty) armoured electrical cable with aluminium conductor for working voltage upto 1.1 K.V. etc. as rqd.

7.7.5 16 sq.mm, 2 core (for pole light ) 300 per mtr 205.00 61,500.00

58 7.3 Laying of one number pvc insulated and pvc sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground incuding excavation and refiling the trench etc. as requred. But exculding sand cushning and protective covering. size on wall surface as reqd.

59 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed PVC conduit as required

60 3.2 Earthing with G.I earth pipe 4.5 mtr. Long, 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal /coke and salt as required. 2 per set 6323.00 12,646.00

61 3.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble as reqd. 40 p.mtr 37.00 1,480.00

TOTAL(PART - A+B+C+D+E) 5,326,429.00

Civil Work ₹ 41,305,512.00

Electric Work ₹ 5,326,429.00

Gross Total ₹ 46,631,941.00

Executive Engineer,

Building Division, Begusarai.