PWD/AMT/SK/2025-26/25

READING TABLE @ 1500LX1200DX750HT Fitting & Fixing of Table. Work Top - Work top shall be made 25mm thick (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC glued with JOWAT-280.58 glue. Table top is under goes from distributed best for deflection by applying 0.027kg/mm load on Top and concentric load by applying 90kg load on weaker section. Understructure- C-type leg shall be de of vertical member 50X50X1.6mm thick and horizontal member of 3x40x1.6mm thick M.S. pipe confirming IS-Grade 4932 with powder coated finish 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm x40mm X 1.6mm LIP section with powder coated finish confirming to IS 32. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron.

Mid Back Chair for Staff S Type chair having the seat made of moulded Polyurethane foam and 1.20 + 0.10 cm thick. Steel Chroming Recycled composite board measured as per QA method and upholstered with replacablefaric cover. The back made of MS tubular frame insitumoulded with Polyurethane foam and upholstered with fabric cover. Mid Back Size 45 cm (W) x 47 cm (H) and seat size 45 cm (W) x 50.50 cm (D) High REsillience (HR) Polyurethane foemmoulded with density 45+2 kg/cum and hardness load for back foam is 12.0 kgf+0.2 and hardness load for seat foam is 16 kgf+2 as per IS 7888 (for 25% compression). The armrest top PUmoulded with plastic inner and moulded on injection moulded Nylon armrest structure, the armrest top has three adjustments swivel, front and back, width adjustment, arnrest- Arnrest top is PUmoulded with metal insert and is mounted on injection moulded nylon armrest structure Centre Tilt Synchro Mechanism disigned with 360 degree revolving type, 17 degree+2 degree maximum tiult on pivot on centre, upright position locking, tilt tension adjustment, Pneumatic height adjustment has an adjustment of 10.00+0.30 cm.

Network Video Recorder IP Camera 16 Ch. H.265+ 4K Network Video Recorder IUp to 32 channel IP camera input Max 320Mbps incoming bandwidth Instastream/H.265/Smart H.264+/H.264/MJPEG codec decoding Up to 24MP resolution preview and playback Support 4 SATA HDDs up to 10TB Each, 3 USB Port HDMI/ VGA simultaneous video output Support Multi-brand network cameras 1-channel fisheye dewarping (AI by NVR) AI by Camera: Perimeter protection; face detection and recognition; SMD Plus; video metadata; ANPR; people counting; stereo analysis; crowd distribution; heat map Mobile Software: iCMOB, gCMOB CMS Software: KVMS Pro AI by Camera: Face detection, perimeter protection, IVS, people counting, heat map, and SMD Processor Industrial embedded micro-processor Operating System Embedded LINUX User Interface GUI Video Output 2 HDMI, 2 VGA Video Resolution HDMI1: 3840 × 2160; 1920 × 1080; 1280 × 1024; 1280 × 720; VGA1: 1920 × 1080; 1280 × 1024; 1280 × 720; HDMI2/VGA2: 1920 × 1080; VGA1/HMDI1 homologous output; VGA2/HDMI2 homologous output and VGA1/HDMI1 and VGA2/HDMI2 supports heterogeneous output Video Recording Max 320Mbps Incoming Bandwidth Video Display Split 1/4/8/9/16 Channel 16 channel Motion Detection MD Zones: 396(22×18). Video Loss supports+B14+B14 Bandwidth Incoming 320Mbps Alarm Input 16 channels Alar

Supplying & installing UTP networking Cat-6+ cable suitable for LAN / WAN Computer networking ( Dlink/ Iball)

RJ45 CAT6E Lan I/O Network Keystone Jack + Gang Box + Single Port Face Plate/ White (D-Link / Iball)Compliance Supported Standards CAT6, CAT6E Port Connection Connector Support RJ45 (D-Link / Iball)