PROVISION OF SANITARY BLOCK WITH SEPTIC TANK AND WATER SUPPLY CONNECTION FOR GD POSTS AT 8TH CAVALARY AT MIL STN JASAI UNDER GE ARMY BARMER

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in any type of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep and getting out in hard rock by chiselling complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in soft / disintigrated rock complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Removal of excavated material [rocks] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L moorum / red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed.

M&L PCC 1:4:8 type D2 by using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed.

M & L walling of random rubble masonry,well bonded ,bedded and solidly hearted built in cement mortar 1:6 and brought up to course complete all as specified and directed.

M & L pre-cast cement concrete block masonry using PCC, 1:2:4, type B-1 solid blocks, not exceeding 10 cm in width and setting in cement mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

M&L roughly squared stone lintels hammer dressed on face and soffits,hoisted, set and pointed in cement mortar 1:6 complete.n exc 3m in length complete all as specified and as directed .

M&L stone slab 25 mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints, exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and as directed .

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate for sub base as in floor complete all as specified and as directed .

M&L Non Skid ceramic tiles, coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L Glazed coloured ceramic tiles of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface such as dado/ skirting etc., over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:4 externally, on stone masonry wall surfaces, finished even and fair without using extra cement complete all as specified and directed.

Extra over for hammer dressing to face stone with max. depression on face from a straight edge not exc 20mm and dressing face beds and joints to random rubble uncoursed masonry, complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 internally, on stone masonry wall surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar 1:3 on concrete ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C -1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight complete all as specified and as directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for union complete all as specified and as directed.

S&F stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 20mm bore iron pipe or for union complete all as specified and as directed.

S&F 20 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

S& F stop valves, 15 mm dia, cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle with long shank and cup [concealed type] for iron pipe etc complete all as specified and as directed.

S&F fancy type, chromium plated, bib tap, long body cast copper alloy with spindle,half turn with screwed down, screwed for 15 mm bore iron pipe complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches or in floors complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches or in floors complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps complete all as specified and as directed.

S & F cast iron branch pieces with ovall access door, single [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches suitable for 100mm dia pipes complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 100mm bore, for cast Iron soil / waste / vent pipes complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 75mm bore, for cast Iron soil / waste / vent pipes complete all as specified and as directed.

S&F cast iron floor trap 75mm dia out let, with CP grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1 complete all as specified and as directed.

S& F100 mm X 100 mm size, salt glazed stoneware gully traps, square or round mounted, type "S" or "P" set and jointed in cement mortar 1:1 complete all as specified and as directed.

S & F cast iron vent cowls suitable for 100mm dia pipes complete all as specified and as directed.

S&F 1000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including 40mm thick PCC 1:2:4 type B1 using 20mm graded aggregate platform for water tank complete all as specified and as directed.

S&F Factory made steel windows ( glazed) with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified and as directed.

S&F Factory made steel ventilators with top hung shutters including box type hinges, steel peg stay complete all as specified and as directed.

S&F 3.00 mm thick figured glass,pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

M&L rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

Preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and as directed.

M&L solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet re-inforced with M.S. square tube supplying and fixing in opening all as specified as per SSR Part-II, complete all as directed .

M&L factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as per specification and drawing in SSR Part-II , complete all as specified and as directed .

S&F 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L mild steel work as in door frame and similar work fixed with angle cleates, confirming to Fe 290 Grade - E - 165 complete all as specified and as directed.

M&L mild steel work as in hold fasts, clamps, bands, straps or stays, wall ties, hooks etc confirming to Fe - 290, Grade E-165 including prepartion of surfaces and treated with coal tar and sanded with clean sharp sand complete all as specified and as directed.

S&F 150 mm long, mild steel, pressed handles, oval type, stove enameled black complete all as specified and as directed.

S&F 200mm long, mild steel, barrel tower bolts, stove enameled black with bright bolt complete all as specified and as directed.

S&F 300mm long mild steel sliding door bolts plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F 200 mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long including pillar tap, cast copper alloy, chromium plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&Fviterous china bowl urinal flat back, of size 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including CP stop cock 15mm bore, ,PVC connection pipe 15mm bore 600mm length, PVC waste coupling 32mm and waste pipe etc complete all as specified and as directed.

S & F white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and 'P' or 'S' trap including provision of lime concrete bedding including 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed.

S& F PVC connection of 15mm bore and 450mm long with PTMT nuts complete all as specified and as directed.

M&L apply evenly a tack coat of industrial bitumen of 85/25 @ 1.2 Kg per Sq.m including cleaning the surfaces complete all as specified.

S&F 150 mm bore Salt glazed stone ware drain pipe laid in trenches and cement joint in cement mortar 1:1 complete all as specified and as directed

M&L PCC 1:4:8 type D-2 (using 40 mm graded crused stone aggregate) as in bed to150 mm bore salt glazed stone ware drain pipe including packing under and haunching against the side of pipe after they are laid and tested complete all as specified and as directed

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on walls complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

Construction of soakage well of stone masonry of size 3.6m dia and 4.5m depth including necessary excavation & earth work in any type of soil / soft desintigrated rock all as shown on TD Drg No. CEJZ/ TD/29 sheet No.1/3 to 3/3 complete all as specified and as directed

Construction of septic tank of stone masonry for 50 users including necessary excavation & earth work in any type of soil / soft desintigrated rock all as shown on TD Drg No. CEJZ/ TD/31 sheet No.1/3 to 3/3 complete all as specified and as directed

S&F swivel shower of PTMT any colour for fixing with 15mm bore pipe with shower arm 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weight 40 gms) complete all as specified and as directed .

S&F brass chromium plated tubular towel rail, 20mm dia, D Type, 600 mm long between flanges including brackets complete all as specified and as directed.

S&F soap dish, vitreous china, white of approximate size 160 x 160 x 90 mm embedded in wall complete all as specified and as directed.

Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and as directed.

M&L reinforced cement concrete type B-1 [Nominal Mix] 1:2:4 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L TMT steel bars of 6 to8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished surfaces complete all as specified and directed.

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide includingrough finished surfaces complete all as specified and directed.

M&L reinforced cement concrete type B-1 [Nominal Mix] 1:2:4 using 20mm graded stone aggregate as in as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.

Preparing new plastered surfaces of walls and applying two coats of cement based paint complete all as specified and as directed.

M&L hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 100 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate for sub base as in floor complete all as specified and as directed .

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and as directed.

M&L machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006,M-35 Grade, 60 mm thick with grey cement and pigments, over and including sand cushioning of 50mm thick complete all as specified and as directed.

Preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and as directed.

Precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in landings, cover slabs (for man holes etc) chullah hoods,chajjas,water troughs,shelves and similar articles with plain faces complete all as specified and as directed .

M&L 40mm thick, PCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate as in damp proof course to horizontal or vertical surfaces including mixing with WPC and necessary form work complete all as specified and as directed. NOTE :- WPC shall be measured and paid separately under respective item.

M&L for screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen confirming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. NOTE :- WPC shall be measured and paid separately under respective item.

Supply only water proofing compound ISI Marked

M&L point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in 20mm dia PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked and terminated to and including provision of sunken 1.6mm thick pressed steel terminal boxes with 3mm thick hylam sheet cover on top for fixing switches, sockets / regulators etc.,, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light / fan point controlled by one, one way switch complete all as specified and directed .

M&L angle lamp holder, PVC / poly carbonate type with black plate suitable for batten fittings complete all as specified and directed.

M&L LED lamp 9W 230 volts complete all as specified and as directed . Make : HPL Cat Part No. LTHPLEDLAMP9W/B22 or equivalent model in Havells / Bajaj/ CG/ Philips

M&L switch piano type 5 Amps, single pole, flush type, one way, complete all as specified and as directed.

M&L ceiling rose, surface backlite, 65 x 50 mm, three terminals, 230 volts complete all as specified and as directed.

M&L LED integrated batten T5 tube light fitting 1X20W indoor decorative aluminium extruded T5 LEd batten integrated type complete with all accesories internally pre wired including tube rod and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : C&S Cat Part No. LTTBF20WLED/W (4 ft- white) or equivalent model in Havells / Bajaj/ CG/ Philips

M&L Exhaust fan of 300 mm sweep complete with bracket frame including making necessary holes in wall with necessary connecting work and fixing the exhaust fan on the bracket frame and making necessary electric connection complete all as specified and as directed .

M&Lsubmain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including 25mm dia PVC rigid conduit with accessories concealed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 4 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.

M&L single pole and neutral enclosure with two pin earth plug and socket with one MCB SP 20 Amps 240V complete all as specified and as directed.

M&L submain wiring with two runs of 1.5 sqmm with one run of 1.5 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including 20mm dia PVC rigid conduit with accessories concealed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 1.5 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.

M&L factory made distribution board in sheet metal enclosure in double door with 200A rated copper bus bar,SPN 8 way, 240V having degree of protection as IP43-IK09 with neutral link with provision for SPN as incomer and SP MCB's as outgoing and total No. of modules equal to 4 for fixing MCB's complete all as specified and as directed.

M&L MCB SPN ‘C’ Curve 10KA , 20 amps 230V complete all as specified and as directed .

M&L MCB SP ‘C’ Curve 10KA , 6-30 amps 230V complete all as specified and as directed .

M&L LED street light fitting made up of pressure die cast aluminium with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP65 protection and impact resistance of IK07 with 10KV built-in-SPD and other accessories fixing on wall complete with electrical connections and necessary fixing arrangements with GI bracket made out of 25 mm bore GI tubing, medium grade, bent to shape of 1.20 m long including clamps, nuts, bolts and washers etc. and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells Cat part No: LHETBXU7PA7B060 or Techno commercially equivalent of Wipro / Philips / Bajaj

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and as directed.NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 2 core 10 sqmm complete all as specified and directed

Supply and spreading clean dry sand ( tibba sand) in trenches for cushioning to PVC cable and punning to provide required cover to UG cable complete all as specified and directed . Note :- Punned thickness shall be measured for the purpose of payment.

Supply & laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti cable cover 25cm to 30cm wide and not less than 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified and as directed.

S&F GI tubing 40mm bore light grade with all fittings and laid in trenches/ fixed on walls/ poles or laid under road / paving with clampetc., for protection of cable complete all as specified and as directed.

S&F GI tubing 25mm bore medium grade with all fittings and laid in trenches complete all as specified and as directed.

S&F GI tubing 20mm bore medium grade with all fittings and laid in trenches complete all as specified and as directed.

S&F 25 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

S&F 20 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

Cutting of existing road to a length of 6mtr, width of 25cm and depth not exceeding 25cm for laying of GI pipe including returning and filling, spreading levelling, watering and well ramming in layers and making good with PCC 1:2:4 type B1 for top 100mm thick complete all as specified and directed.

Cutting existing steel tubing for alterations or additions for 50/40mm bore pipe and inserting Tee equal including necessary earth work complete all as specified and as directed.

Godara Construction and General Suppliers

m/s jogaram sujaram

National Rewinding Works