Overhauling of Drycon conveyor

Amount

Inspection, & Replacement of the worn out band elements (High profile & Low profile) by opening the manual doors and identifying the worn out band elements replacing the band elements by removing the chain links and chain attachments replacing the same with new band elements and assembling the chain links and chain attachments and checking the operation of the Drycon conveyor including cost of hire charges for special tools and other T&P required, consumables and Safety appliances etc., complete.

Inspection & Removing/ Replacing the worn out Supporting roller assemblies with spare and Servicing, Replacement/Reconditioning the worn out internals of supporting roller assemblies such as oil seals, bearings, shaft sleeve, Circlip and assembling the supporting roller assemblies in to the Drycon conveyor including the cost of hire charges for special tools required and other T&P required, consumables such as oil seal, O-rings and other Safety appliances required etc., complete. (Spares will be supplied by TANGEDCO).

Inspection, Removing, Replacing the worn out Lateral correction guide plates of the Drycon conveyor, checking the Chain Pocket wheels in Drive end and Non drive end, Carrying out the alignment of the band elements with the guide plates, head and tail pulley of the Drycon conveyor including the cost of hire charges for special tools and other T&P required, consumables and other Safety appliances required etc., complete. (Spares will be supplied by TANGEDCO).

Overhauling of all Bottom ash hopper gates and its Hydraulic systems, and its Pumps, Cleaning the Filters and the hydraulic oil lines, Reconditioning /replacement of wornout internals, O-rings, Gaskets, Replacing the Oil, including cost of hire charges for T&P required, consumables such as ‘O’-rings, Oil Seals, Gaskets and other Safety appliances etc., complete.

Overhauling of Drycon Hydraulic tensioning unit and its lines, Hydraulic Cylinders, Pumps, Replacing the O-rings, Gaskets and replacing the oil, including the cost of hire charges for T&P required, consumables and Safety appliances etc., complete.

Inspection and attending the patch up welding of the bottom ash conveying chutes and its equipments. This work involves transporting the M.S plates from MTPS-II stores to Bottom ash area, cutting into required size, leading , lifting, positioning on the eroded portion of bottom ash conveying chutes elevation and welding eroded (or) punctured portion of Bottom Ash buffer hopper, Drycon & it’s internals, Oscillating screen and its auxiliaries, primary & Secondary crusher and its discharge Chutes, Ash Hopper below the Secondary crusher, Bucket elevators and its discharge chutes, Rotary vane feeder & its discharge chutes etc. including the hire charges of scaffolding, Safety appliances and T&P’s required.

Inspection of entire linear plate, removing worn out linear plates and Renewal of DRYCON linear plates in Drycon conveyor casing including the cost of linear plates and devoluted the scrap material at MTPS-II stores and hire charges for T&P required, consumables and Safety appliances etc., complete.

Inspection, removing worn out guide I-beams, erection of new guide I-Beam in Drycon system, Correcting the alignment and devoluted the scrap material at MTPS-II stores including the cost of Materials required, T&P’s required, consumables and Safety appliances etc., complete.

SRINIVASA ENTERPRISES