Welcome maint to Offrs Qtrs at MGs enclave Ajaymeru Haldighati line at Mil Stn under GE(S) Jaipur

Amount

M&L for preparation of old decorated surfaces of wall (plastered or unplastered) including cornices pillasters and other wall features by brooming down smoke, soot moulds and efflorescent salt and trading oil or greasy spots applying one coat of white wash on walls to obtain uniform surfaces including scafolding arrangement, trestles, ladders etc all as specified and directed.

All as per Srl No. 1 above but one coat of white wash on ceiling

M&L for preparing of old decorated surfaces of (Plastered or unplastered) including cornices pillasters and other wall features by washing, rubbing down and stopping of distmpered and painted surfaces of walls and applying one coat of oil emulsion distemper white or tinted including filling of any minor hole/ deperssion with wall care putty and scaffolding arrangement, trestles, ladders etc all as specified and directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces including filling of depressions etc and applying two coats of oil bound distemper of approved tint .

M&L for one coat of 1mm thick Birla wall care putty on walls etc

M&L for preparing of oil paianted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying on coat of synethic enamel paint on wooden surfaces all as specified and directd by Engineer-in-Charge

M&L for preparing of oil paianted surfaces of Steel surfaces of any description over 10 cm width or girth and applying on coat of synethic enamel paint on Steel surfaces all as specified and directd by Engineer-in-Charge

M&L for preparation of old decorated plastered/ unplastered Surfaces of walls, soffits of chajjas,cornices etc and applying one coat of cement base paint upto two storey building including scaffloding arrangement all as specified and directed by Engineer-in-charge.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces including filling of depressions etc and and applying two coat of cement base paint upto two storey building including scaffloding arrangement all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated plastered/ unplastered Surfaces of wall, facia & projection etc and applying two coat of Apex upto two storey building including scaffloding arrangement all as specified and directed by Engineer-in-charge.

Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM

M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified.

M&L for rendering 10mm thick in cement mortar 1:4 on concrete surfaces including finished fair & even on ceiling.

M&L for rendering 10mm thick in cement mortar 1:6 on brick masonry /concrete surfaces of walls including finished fair & even.

M&L for preparation of new plastered surfaces and walls applying two coats of oil bound distemper of approved shade/tint over a coat of Birla wall care putty on walls all as specified & directed by Engineer-in-Charge

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces.

S&F in repair CP fancy Type center hole basin mixer 15mm bore cast copper alloy with 450 mm copper hose /braided hose without Popup waste system quarter turn and fixed in repairs .and complete all as specified.(Make- Jaquar Cat No Con- 167KNB) or Equivalent in Marc, Plumber.

S&F in repair CP wall Mixer with flange & 115 mm long bend pipe forover head shower non Telephonictype with connecting legs wall flanges and crutch etc quarter turn 15mm bore for mixing hot & cold water and complete all as specified . (Make- Jaquar Cat No Con- 281KN) or Equivalent in Marc, Plumber.

S&F in repair CP cast copper alloy bib taps long body with wall flange fancy type of 15 mm bore quarter turn , complete all as specified.(Make- Jaquar Cat No Con- 107KN) or Equivalent in Marc, Plumber.

S&F in repairs in ball valve of PVC complete with aluminum rod with polyplast ball for 15mm dia iron pipe complete all as specified For low level flushing cistern.

S&F in repairs of Ball valves 25 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified .

S&F in repairs PVC connection 15mm dia 45cm long with 2 Nos brass checknuts with washer complete all as specified.

All as per Item No 22 above but 60 cm long

S&F in Repairs of Chromium plated Overhead Rain shower with relvoling joint and 115mmlong shower arm with wall flange 15 mm bore fancy type any colour complete all as specified .(Make- Jaquar OHS-1709) or Equivalent in Marc, Plumber.

S&F in repairs 32mm dia PVC waste pipe flexible type for WHB 60cm long with union all as specified.

S&F in repairs waste fittings brass chromium plated 32mm dia for wash hand basin all as specified.

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore

20 mm bore

S&F in repairs Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as directed

S&F in repairs plastic water closet seat cover white /colour ,closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified.

S&F in repairs Vitreous China wash hand basin flat back basin including half pedastal , coloured, , size 610x560mm including CP waste coupling but excluding taps, waste chain & plug . Complete all as specified and directed.

S&F in rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position 500 ltrs capacity including disonnecting and refixing the GI pipe and fittings all as directed ( Make : SINTEX / ROTAX/ POLYCON ) including dismantling of old water tank

All as per Item no 31 above but 1000 ltr indluding dismentling of old water tank

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule Complete all as specified and directed.

S&F in repairs CP brass bottle trap 32 mm dia including joining to waste fitting and waste pipe complete all as directed.

S&F in Repairs of Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore any colour complete all as specified .(Make- Jaquar Cat No Con- 053KN) or Equivalent in Marc, Plumber.

S&F in Repairs of Sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with & including fixing cantilever brackets and connecting union to pipe, ovS&F sink made of stainless steel 1.0 mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with & including fixing cantilever brackets and connecting union to pipe, overall size 1197mm x 457mm bowl size 406 x 330 x160 mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete.

M&L in repairs spindles for 15 mm CP brass bib cock/stop cocks etc size 1 nos to 4 nos for full trun fittings/ half truns complete as directed.

S&F in repairs PVC sintex water storage tank lid cover (Cylindrical) for 500 ltrs capacity.

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( Pedestal pattern ),white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete fixed in repair

S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Lit capacity .complete as directed.

S&F of CP pressure JET for EWC including flexible pipe for 15 mmdia bore (Make- Zim Cat No Con- 1712) or Equivalent in Marc, Plumber.

Taking down the existing unserviceable stop valve and S&F stop valve 15mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repair Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions

S&F in Repir CP cast copper alloy bib taps two way with wall flange and areator fancy type of 15 mm bore quarter turn complete all as specified.(Make- Jaquar Cat No Con- 041KN) or Equivalent in Marc, Plumber.

S&F in Repir CP Health foucet with chain e of 15 mm bore complete all as specified .(Make- Jaquar Cat No Con- ALD-577) or Equivalent in Marc, Plumber.

S&F in Repairs of bathroom Glass corner shelf of best quality complete all as specified and directed.(Make- Jaquar Cat No ACN-1173) or Equivalent in Marc, Plumber.

M/L for Fancy type MS Bracket heavy duty size 150 mm long suitable for curtain rod fixed in repair

S&F in Repairs of 20 mm dia MS Curtain Fancy type PVC coated rod .

S&F in Repairs of Fancy type caps/ side Bulbs PVC powder coated suitable for curtain rod .

S&F in Repairs of Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.

Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 4 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frames etc) complete all as specified.

All as per Ser Item No 51 above but pin headed figured glass 4mm thick

Dismanting boarding plywood etc of any description and in any position fixed with nails etc all as directed.

M&L of 19 mm thick Prelaminated particle board, interior grade, prelaminated both side with deocrative choice lamination , fixed with screws to timber frame work

M&L for 6mm thick plywood, grade BWP, type BB fixed with nails to timber frame work of shutters and similar works.

M&L of 19 thick MDF Boards in cabinet almirah cub board/kitchen cabinet and partition of cabinet including lipping work fixed in repair

S&F of brass handle of 100 mm size type polished bright in repair

M&L Auto close hinge 100 mm long of brass with CP finish for Kitchen Cabinet and Almirah shutter etc in repairs.

S&F in repairs 140mm long with cover plate floor door stopper of Brass body single legged with rubber shoe fixed to bottom rail of door as directed

S&F in repairs elegent mirror PVC cabinet with towel rail of size 475 X 600X150 mm all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 15 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed by Engineer-in-charge.

S&F Coloured Glazed ceramic tiles size 300x450mm x 7mm thick edge cut/ joint free , on walls etc in the combination of light and dark shed concept . set & jointed in neat cement slurry & pointed in white/coloured cement to match over and including 15mm thick plaster in cement mortar (1:4)

Demolition of PCC in ground floors and pavings not exc 15cm thickness ( below or above ground level )

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, laid over 15 mm thick screed bed in CM(1;4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed by Engineer-in-charge.

S&F light shade Vetrified Ceramic tiles edge cut 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, laid over 15 mm thick screed bed in CM(1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:4) or tile addessive all as directed by Engineer-in-charge.

Chequered cement concrete tiles 20cmx20cmx25mm thick, set,jointed laid over 20 mm thick screed bed in CM (1:4) and pointed in neat cement slurry in floors.with grey cement and no pigment

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed over and including 25 mm thick sand cushoning all as directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even all as specified and directed by Engineer-in-charge.

M&L of 25 mm wide aluminium door cill and fixed in repairs all directed by engineer in charge

Dismantling of Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar

M&L for Granite (of any type) work (table rubbed and polished) 16 to 18mm thick in risers & treads of steps, jambs, pillars, window cills,cooking platforms and similar works over & including 20mm thick screed bed (bedding layer) in CM 1:6, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including cutting and polishing (half mirror polish i.e. half granite polish as per local trade practice) all as specified & directed by Engineer-in-charge.

M&L for machine cut Makrana white Marble slab 16 to 18mm thick in risers & treads of steps, jambs, pillars, window cills, cooking platforms and similar works over & including 20mm thick screed bed (bedding layer) in CM 1:6, pointing in white cement including cutting and polishing (half mirror polish i.e. half granite polish as per local trade practice) all as specified & directed by Engineer-in-charge.

S & F aluminium die cast Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed in repair

M&L CP wall Mixer TelephonicShower arrangment with connecting legs wall flanges and Telephonic shower crutch (Model Make-JAQUAR CAT PART NO CON 267KN or equivalent)) and telephonic hand shower single flow with self cleaning and flexible tube with hook 15mm bore for mixing hot & cold water screwed down for iron(Make-JAQUAR CAT PART NO ALD 577or equivalent)

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 except bricks

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, Type 'B', ISI marked of 110mm bore. including taking down old branch pieces. complete all as specified and directed.

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, Type 'B', ISI marked of 75mm bore. including taking down old branch pieces. complete all as specified and directed.

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore.including taking down old branch pieces. complete all as specified and directed.

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 75mm bore.including taking down old branch pieces. complete all as specified and directed.

S&F UPVC (SWR) bend of any radius of 110mm bore.

S&F UPVC (SWR) bend of any radius of 75mm bore.

M&L for welding of existing damaged/ broken hinges and any other member of steel windows, angle iron chowkhat, steel gates,steel ventietor to achieve smooth functioninf.

35mm thick IInd class hard wood factory made plain, framed, panelled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & steel as per IS:1003 (Part-I) kiln seasoned & chemically pressure treated.

35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered / rounded fitted without & mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I Section 8 Clause 8.2 (a) supplied & fitted to chowkats.

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Aluminium handles 125 mm size, cast type, anodised

Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Aluminium Powder coated frame for holding of two track sliding shutter fixed type with aluminium section weighing 0.55 Kg/Mtr incl. necessary joining, cleats, glazing clips, rubber packing powder coated aluminium snap beading, screws etcand beading for fixing of galvanised wire wire mess complete all as specified

Aluminium Powder coated frame for fixed type with aluminium section weighing 0.55 Kg/Mtr incl. necessary joining, cleats, glazing clips, rubber packing powder coated aluminium snap beading, screws etc and beading for fixing of galvanised wire mess complete all as specified

Aluminium powder coated door/window shutter openable/ sliding type with aluminium section weighing 0.35 Kg/ Mtr incl. necessary joining, cleats, glazing clips, rubber packing aluminium powder coated snap beading, screws, handle & tower bolt etc complete all as specified

S&F in repair CP Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe

Dismantling wrought iron or mild steel work of any description

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

MS rolled sections as in trusses, purlins, crane gantries and heavy brackets framing etc, (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W complete.

M&L for Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with L-type of J-type hook bolts in lieu of screws and washers in roofs etc .

S&F in repairs Soap dish brass CP ((Make-Jaquar CAT PART NO AQN-7731) or equivalent in MARC,

S&F in Repairs Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws (Make- Jaquar Cat No ACN-1153S) or Equivalent in Marc, Plumber.

S&F in repairs Towel ring of brass CP Squar flange (Make- Jaquar Cat No AQN-7721) or Equivalent in Marc, Plumber.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)

All as per item No 106 above but area n exc 1.50 Sqm each.

Taking down shutters of any description exc 1.00 sqm but n exc 2.50 sqm each

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( Pedestal pattern ) wall hung including cascade type cisteren ,white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete including Cisteren .( Make-EWC HINDWARE CAT PART NO 20048 CRYSTAL or equivalent& fixed in repair

M&L for damp proof guard for walls and other concrete surfaces including preparation of surface even and smooth and making good with birla putty and oil based distemper also includes rendering 15 mm thick in CM 1:6 all as specified with taking down of cemet plaster

M/s Bhavesh Construction Company

Narayan Enterprises

Deep Construction Company

MANOJ KUMAR NAGAR