COMPREHENSIVE MAINTENANCE OF B/R WORKS IN CERTAIN CIVILIAN MARRIED ACCN, MES MD ACCN AND OFFICES AT AFS AMLA

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Joint free, Non - skid coloured ceramic tiles; 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match set, over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for Non - skid coloured ceramic tiles; 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in coloured cement to match the light shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

All as per item No 03 above but in vertical surfaces as in skirtings, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:3 complete all as specified and directed.

M&L for digital coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/ 450 x 300 x 7 to 8 mm thick, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles including 10mm thick backing coat in 1:4 cement mortar complete all as specified and directed.

Material and labour for Granite (Jet black) 18 to 20 mm thick table rubbed & polished in steps , jambs, cills, shelves etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixture of pigment to match with the shade of granite over and including 15mm thick screed in CM 1:4 complete all as specified and as directed .

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S/F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of wall,display board/ceiling board fibre, pulp,insulation etc or insulation board /slab/wool of any thickness including cover fillets complete all as specified and as directed.

S & F Anodised aluminium snap grid frame work of size grid 605X605mm for false ceiling all as specified and directed with hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleat of GI flat 40x3mm and 60mm long and expension holed fasteners 12.5mm dia 40mm long complete all as specified and directed.

M&L for 6mm thick non asbestos fibre cement building board fixed in cement ceiling flat or sloping to GI/aluiminium frame work complete all as specified and directed

Demolition of plain cement concrete as in ground floor and paving not exceeding 15 cm thickness below or above ground level (unreinforced concrete) including disposing of debris off the premises complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base 75mm thick, finished fair & even complete all as directed.

M&L for 100 mm thick Plain Cement Concrete (PCC) 1:2:4 Type B-2 (using 40mm graded stone aggregate) as in top layer of the floor, pavings etc., including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection, including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green and making saucer drain complete all as specified and directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing the debris outside the defence land all as specified and directed.

M&L for Brickwork with fly ash bricks, 75 kg/cmsq compressive strength, Modular size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engineer - in -Charge.

M&L for rendering 10 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement with and including sagol finish complete all as specified and directed.

M&L for (10+5)mm thick for rendering fair faces of brick work or Concrete surface in two coats 10mm thick in CM(1:6) as under coat 5mm thick CM (1:4) as finishing coat in two separate layer mixed with Liquid water proofing compound finished even and smooth without using extra cement at any height including necessary scaffolding, ladder, formwork etc complete all as specified and as directed. Note: Water proofing compund shall be measured and paied seperately.

M & L for 5mm thick rendering in 1:3 CM on ceiling, RCC facia and chujj's of fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of Interior emulsion paint over a coat of chalk white primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint over a coat of alkali-resistant primer complete all as specified and directed.

M&L for three coats of white wash on newly surface on ceiling including all preparation complete all as specified & directed

Supply & Fixing in repair vitreous China squatting pan, Orissa patteren, size 580mm x 440mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F PVC (SWR) 110mm dia 'S' trap including connecting to out let with solvent cement complete all as specified and directed.

M & L in repairs for PVC nahani trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with solvent cement of dia 75mm complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm fixed to pipes and valves complete all as specified and directed.

S&F vitreous china wash hand basin white angle back size400mmx400mm excluding taps waste chain and plug and percelain stopper including two coats of synthetic enamel paint over coat of red oxide primer on exposed surfaces of breckets waste coupling brass CP 32 mm bore with long screwed shanks bedded in red lead cement and other end fixed and pillar taps 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks screwed and removing debris out of MoD land complete all as specified and directed.

S&F in repair 15mm dia Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen with plug, washers & waste incl bedding in CM 1:3 to dwarf wall or incl fixing cantilever brackets and connecting union to pipe. Over all size 915 mm x 460 mm, bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed..

S&F in repair Harrison curtain rails, mild steel, chromium plated including fancy type brackets, stops, rollers etc. complete all as specified and directed.

Taking down GI tubing 15mm bore complete all as specified and directed

Supply and fixing GI tubing 15mm bore medium grade with all fittings fixed to wall and ceiling complete all as specified and directed.

Dismantling water tanks of capacity exc 250ltrs but n.exc 500ltrs complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),of capacity 500ltrs hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repairs 15 mm bore bib taps cast copper alloy with Chromium plated crutch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm dia Stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair 15 MM bore dia, stop valves fancy type chromium plated with long shank and cup (concealed type), cast copper alloy, fency type screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipes of union complete all as specified and directed.

Taking down PVC chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed..

Taking down chowkats or frames with shutters any type not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames with shutters any type exceeding 1.5 Sqm and not exceeding 4.0 Sqm each (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sqm each complete all as specified and directed.

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed

S & F 35mm thick 2nd class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR Part-I section 8 cluase 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S & F steel ventilator with top hung shutters incl hinges with steel peg stay, complete all as specified and directed.

S&F 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

All as per item No. 55 above but 75mm long complete all as specified and directed.

S& F 150mm long aluminium anodised barrel tower bolts of extruded section (SI marked) complete all as specified and directed.

All as per item No. 57 above but 100mm long (SI marked) complete all as specified and directed.

S&F 150mm long size extruded aluminium alloy handles, cast type anodised (ISI Marked) complete all as specified and directed.

All as per item No. 59 above but 100mm long complete all as specified and as directed.

S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fix complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane including hacking out broken glass pane complete all as specified and as directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Taken down and refixing in same opening, shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; hold fast, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for reinforcement cement concrete slabs 1:2:4 type B1 (using 20mm graded stone aggregate) as in supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed.

M&L for Preparation new painted steel surfaces of any description over 10cm width or grith not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide and zinc chrome complete all as specified and as directed

M&L for Preparation old painted steel surfaces of any description over 10cm width or grith not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide and zinc chrome complete all as specified and as directed

M&L for complete removal of existing treatment (Cement Base Paint/White Wash/OBD/Exterior weather paint/Oil paint etc) of external decorative surface from walls, cornices, jambs, cills, parapet wall, pillars etc or any other description by scrapping with mechanical wall sander (having mechanical vacume mechanism) with RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint, removal of nails etc including fillings depression surfaces, cracks/holes by waterproof cement based putty complete by skilled labour to the entire satisfaction by EIC complete all as specified and directed.

M&L for preparation of external old decorative surfaces of walls and applying two coat of weather shield/weather proof Acrylic exterior emulsion paint by skilled labour and applying one coat of acrylic water based exterior grade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Note : Exterior emulsion paint to be done by roller. (Colour and shade as per new colour scheme approved by GE)

M&L for preparing of old decorative internal surface of walls of any surfaces and applying one coat of interior acrylic emultion paint complete including filling cracks with wall care putty wherever necessary complete all as specified & directed.

M & L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for Cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), depth exceeding half brick but n. exc one brick complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor,Overall length of cover plate 150mm complete all as specified and as directed.

M&L for PCC 1:2:4, type B0 (using 12.50mm graded crushed stone aggregate) as filling of steel chowkat, hold fasts, bed blocks & like including necessary formwork complete all as specified and directed.

S&F in repairs Brass chromium plated tubular towel rail, 'D' type 60 cm long between two flanges fixed on wall with studds complete all as specified and directed.

S&F Grating doom 100mm dia of stainless steel (Minimum weight 25gms) complete all as specified and directed.

Material & Labour for cleaning of roof surfaces and applying a coat of oil base bituminous primer @ 0.30 lit per sqm over and including 15mm thick cement plaster in CM 1:4 mix with liquid water proofing admixture@200ml per bag of cement including laying of APP based polymeric membrane weighing not less than 3.00 kg/ Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt,not less than 150gms/sq. m) land on primed surface by tension application with 100mm over lap travers and 150mm over lap longitunal and finishing the top surface by applying two coat of aluminium paint @ 0.1kg/sqm on each coat including taking down old treatment complete all as specified and directed.

Material & Labour for providing cement concrete 30mm thick PCC 1:2:4, type B-0 (12.5mm graded agg) as in padding on roofs slab to receive water proofing treatement, laid to required slope, finished even and smooth without using extra cement complete all as specified and directed.

M&L for repairing of R.C.C projections, chajjias, roofs, facia, columns, beams etc., in patches not exceeding 3 Sqm in each patch by necessary preparation, Scrapping, cutting, chiseling Dusting and cleaning exposed reinforcement, surfaces of damaged, loose R.C.C surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforced with welded mesh (If Reqd) with or without facia and finished with 15 mm thick cement and sand mortar (1:4) using coarse sand and thickness of R.C.C member n. exc 75mm including necessary form work at any height including dismantling of damaged concrete complete all as specified and directed. (Note : welded mesh will be measured and paid separately.)

S&F in Repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and as directed.

S&F in repairs Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed.

S&F in repairs Powder coated Anodised aluminium grill (Dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

M&L for Brickwork with fly ash bricks, 75 kg/cmsq compressive strength, Modular size, straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

M/s Vinod Yadav (BID ID -3386081)

M/S S.R. Kawadkar (BID ID -3385134)

RAJBAITHE CONSTRUCTION COMPANY (BID ID -3384970)

M/s SHAKTI INFRASTRUCTURE (BID ID -3383185)

PK CONSULTANT (BID ID -3384408)

M/s R K Narware (BID ID -3383735)

S R BUILDERS (BID ID -3386512)