Balance work C O Type II Qrts SH PF WI SI Work other work etc

Earth work in excavation for structure as per drawing and technical specification clause 305.1 including setting out construction of shorting and bracing removal of stumps and other deleterious material and disposal upto a lead of 5 mtr. dressing of sides and bottom and back filling interior with excavated suitable material (i) ordinary soil upto 3 mtr. depth including entire carriage of materials in all leads and lifts including entire carriage of material within all leads & lifts & other incidentals . The rates are inclusive octori,royality ,Malkana ,toll tax,sale tax or other taxes imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. including entire carriage of material within all leads & lifts & other incidentals . The rates are inclusive octori,royality ,Malkana ,toll tax,sale tax or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering- All work up to plinth level: 1:3:6 (one Cement : three Coarse Sand) six Graded Stone aggregate 40 mm nominal size) including entire carriage of material within all leads & lifts & other incidentals . The rates are inclusive octori,royality ,Malkana ,toll tax,sale tax or other taxes imposed by the Government.

Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including entire carriage of material within all leads & lifts & other incidentals . The rates are inclusive octori,royality ,Malkana ,toll tax,sale tax or other taxes imposed by the Government.

Providing & fixing cupboard shutters 25 mm thick with Pre-laminated flat pressed three layer particle board or graded wood particle board IS:12823 marked of Action Tesa kit ply Green ply exterior grade (Grade I Type II ) having one side decorative lamination & other side balancing including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws & bright fnished stainless steel piano hinges complete as per direction of the Engineer-in- charge including entire carriage of material within all leads & lifts & other incidentals . The rates are inclusive octori,royality ,Malkana ,toll tax,sale tax or other taxes imposed by the Government.

Providing & fixing Pre-laminated flat pressed 3 layer (medium density ) particle board or graded wood particle board IS:3087 marked of Action Tesa kit ply .Green ply with one side decorative & other side balancing lamination Grade I, Type-II exterior grade IS:12823 marked in shelves with screws & fitting wherever required edges to be painted with polyurehane primer (fiiting to be paid separately ) 18 mm thick including entire carriage of material within all leads & lifts & other incidentals . The rates are inclusive octori,royality ,Malkana ,toll tax,sale tax or other taxes imposed by the Government.

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). : 12mm thick commercial ply conforming to IS: 1328 BWR type including entire carriage of material within all leads & lifts & other incidentals . The rates are inclusive octori,royality ,Malkana ,toll tax,sale tax or other taxes imposed by the Government.

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge including entire carriage of material within all leads & lifts & other incidentals . The rates are inclusive octori,royality ,Malkana ,toll tax,sale tax or other taxes imposed by the Government.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm including entire carriage of material within all leads & lifts & other incidentals . The rates are inclusive octori,royality ,Malkana ,toll tax,sale tax or other taxes imposed by the Government.

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete : 75 mm including entire carriage of material within all leads & lifts & other incidentals . The rates are inclusive octori,royality ,Malkana ,toll tax,sale tax or other taxes imposed by the Government.