Renovation/Repair of Joinery in OMQs and SMQs at AF Stn Bhisiana (LBW)

Amount

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:3:6 type B0, brick work in 1:6 or CM 1:3 all as specified and as directed. Note: The hold fast fixing location to be prepare for new door frame fixing as directed by Engr-in-Charge.

-Ditto- all as per item above but exceeding 1.5 sqm and not exceeding 4 sqm each. Note : The hold fast fixing location to be prepare for new door frame fixing as directed by Engr-in-Charge.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc of size 125 X 60mm complete all as specified and directed (The hold fast of door frames embeded in dismantled portion).

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc of size 105 X 60mm complete all as specified and directed. (The hold fast of door frames embeded in dismantled portion).

Supply and fixing IInd class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete.

S&F 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides.

Supply and fix glazed and skelton shutter IInd class hard wood 30mm thick, open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing complete.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed to wall all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beasing, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed potion) with extruded built up standard tubular sections/appropriate Z sections, sliding sections and other sections of approved make confirming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. aluminium sections shall be smooth, rust free, straight mitred and jointed mechanically where ever required including cleat angle, aluminium snap beading for glazing/panelling, CP brass/stainless steel screws all complete as per architectural drawings and the directions of Engr-in-Charge. Note: The item used for 3 track sliding aluminium window and doors. The rate includes all fabrication and necessary fixing arrangements. Sliding window frame section : Jindal Sliding window Cat No 20621 and other members are as per direction of Engr-in-Charge. Make: Jindal or approved make (equivalent model) in same technical specifications.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators including providing and fixing hinges/pivots /sliding/ and making provn for fixing of fittings where ever required including the cost of EPDM rubber/ neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make confirming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. aluminium sections shall be smooth, rust free,straight mitred and jointed mechanically where ever required including cleat angle, aluminium snap beading for glazing/panelling, CP brass/ stainless steel screws all complete as per architectural drawings and the directions of Engr-in-Charge. (Note. the rate included spring locks, sliding channels, rollers, stopers, etc for all shutters where ever required). Note : The item used for 3 track sliding aluminium window and doors shutters. The rate includes all fabrication and necessary fixing arrangements. Sliding window shutter section : Jindal Sliding window Cat No 20551 or equivalent and door shutter section Cat No 20923 or equivalent and other members are as per direction of Engr-in-Charge. Make: Jindal or approved make (equivalent model) in same technical specifications.

S&F anodised aluminium grill (anodized transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per require ment and direction of Engr-in-Charge.

S&F of framed work such as grills, gratings etc with ends of barrs shouldered and/or riveted, or forged in to spikes; framed guard bars; barred iron doors; ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe 290 Gde E-165.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty/any type of beading in square not exceeding 0.5 Sqm in each pane and all as specified.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty/ any type of beading in square exceeding 0.5 Sqm in each pane and all as specified.

S&F sheet glass 5.5 mm thick ordinary quality and glazing with oil putty/ any type of beading in square exceeding 0.5 Sqm in each pane and all as specified.

M&L for solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer.

S&F 4 mm figuered glass , pin head type and glazing with oil putty/any type of beading in squares n.exc 0.5 sqm in each pane.

S&F 12 mm thick medium denssity fibre board, exterior grade, fixed to timber/aluminium frame work with screws or any type of beadings.

S&F alluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with alluminium wire stapples.

S&F of alluminium alloy anodised, length of bolt 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium and fixed.

S&F Mild Steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F powder coated aluminium sliding metalic window lock concealed handle cum latch, push type (each lock contain 1 lock,1 brackets and 4 screws) for item Sl number 11 and 12 (Make First lot or as approved by GE).

S&F aluminium mortice latch with two levers vertical type, size 75 mm for doors, complete all as specified and directed by Engineer in Charge.

S&F 100 mm extruded aluminium alloy handle fabricated type, anodised, complete all as specified and directed by Engineer in Charge.

S&F 150 mm extruded aluminium alloy handle fabricated type, anodised, complete all as specified and directed by Engineer in Charge.

S&F aluminium anodized tower bolt 150mm size, complete all as specified and directed.

S&F aluminium anodized tower bolt 200mm size complete all as specified and directed.

S&F cast brass screw eye 10 to 12 mm internal dia and fixed.

S&F Butt hinges Aluminum 100 mm type C-21 complete all as specified and as directed.

S&F floor door stoper 140 mm long of aluminium alloy body and toungue anodised with hard drawn steel spring, complete all as specified and directed.

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops rollers and end dooms etc including removing old pelmet boxes and making surface good, complete all as specified and directed..

Cutting opening, through brick walls in cement mortar or cement lime mortar for doors, window and other openings or enlarging existing openings. Converting window in to door opening, AC openings etc or cutting out defective brick work for under pinning, including providing, fixing and removing shoring, cleaning, cleaning and stacking bricks, removing surplus serviceable bricks, hard core etc to store and rubbish not exc 50 m, complete all as specified and directed.

Making good under cills or over arches lintles and bressummers including all pinning when necessary in CM 1:4, complete all as specified and directed.

M&L 15mm thick rendering in CM 1:6 on brick or concrete surface finishing the plastered surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper on walls including chalk whiting to prepare for distempering and match with existing surface, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer on walls matching with existing surfaces, complete all as specified and directed.

Cutting hole in brick walls thicknes exc half brick but not exc one bricks in cement mortar and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required.

S&F steel window of box section having 1.25 mm thick CRC sheet frame with double shutter inside gauged shutter and outside glazed shutter with one No steel handle in each shutter, one No. peg stay in each shutter, complete with glazing bars and 08 Nos of 10 x 10 mm square guard bars in equal spacing, devoited or welded as per sample incl one coat of red oxide primer all as specified and directed. (The rates includes 4 mm thick plain sheet glass and galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and 2 coat of synthetic enamel paint over a coat of zinc chrome primer). Note : The design of one window to be facilitated by cooler fixing provision in each Qtr, complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm nominal dia and average width of aperture 1.18mm and fixed with tinned tack or galvanized wire staple all as directed fixed.

PCC Type B-0 1:2:4 (12.5 mm graded aggregate), coping, as in hold fast and as in steel frame of door and window back filling and in roof kerbs of mud stops, rounded or chamfered on edges cills, steps etc; as directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces.

M&L applying two coats of synthetic enamel paint over a coat of pink primer on wood or wood based material over 10 cm width or girth including preparation of new wood surface.

S&F solid PVC door frame wood grain printed PVC sheet used instead of plain colour PVC sheets and edges will be painted to match with prelamm sheet of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed to wall all as specified and as directed.

Factory made solid panel wood grain PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent ement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Note: For Cupboard doors and each cupboard will provide 2 panells.

M&L for, Factory made PVC centre partition shelfs of 25mm thickness consisting of MS Frame made out of MS tube of 19 guage thickness and size of 15x15mm inserted all around the hollow profile section and insert 15mmx15mm MS tube in the centre of this section and liped with 10 mm (5mm x2 ) thick plain PVC sheet at the top and bottom and 20mm wide and 15mm thick on sides using solvent cement adhesive and fixed with concrete wall/brick wall by necessary holding arrangements complete all as specified and directed.

M&L continous piano hinges stainless steel, bright finish width of flaps when open 40 mm complete all as specified and directed by Engr-in-charge.

Supply and fixing stainless steel handles, 100 mm size polished bright complete all as specified and directed by Engr-in-charge.

Supply and fixing Hasp and staple safety type aluminium powder coated with mild steel pin inculding bolt to hinge plate and fix with screws 150 mm size of hasps and staples complete all as specified and directed.

Supply and fixing Magnetic catcher for cupboards complete as all specified and directed by Engineer in Charge complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified.

M&L Coloured Non Skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding in 1:6 CM complete all as specified and directed. (Items for door dismantled portions).

M&L for glazed ceramic coloured tiles of size 450x300x7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including 10mm thick cement plaster 1:4 CM to receive vertical tiles compete all as specified and as directed. (Items for door/window dismantled portions).

M&L for coloured joint free vitrified tiles 10 mm thick light shade (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified. (Items for door dismantled portions).

M&L for coloured joint free vitrified Tiles 10mm thick light shade (square/ rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles complete all as specified. (Items for door dismantled portions).

M/s Luxmi Constructions