REPAIR, MAINTENANCE OF WATER SUPPLY DISTRIBUTION AND INSTALLATION AT MIL STN KALUCHAK UNDER GE KALUCHAK

15mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.

20mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.

25mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.

40mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.

50mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed.

15mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.

20mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.

25mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.

40mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.

50mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed.

15mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed.

20mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed.

25mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed.

15mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.

20mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.

25mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.

40mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.

50mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed.

15mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.

20mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.

25mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.

40mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.

50mm bore GI nipple of different length as per requirement, both end screwed, medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed.

20mm x 15mm bore GI reducing socket medium grade ISI Marked including dismantling of old unserviceable GI reducing socket, complete all as specified & directed.

25mm x 20mm bore GI reducing socket medium grade ISI Marked including dismantling of old unserviceable GI reducing socket, complete all as specified & directed.

15mm x 15mm x 15mm bore GI Tee, medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed.

20mm x 20mm x 20mm bore GI Tee, medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed.

25mm x 25mm x 25mm bore GI Tee, medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed.

15mm bore GI solid plug, heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed.

20mm bore GI solid plug, heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed.

25mm bore GI solid plug, heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed.

Note for Srl Item No.1.00 to 31 (i) Any material required for attending complaints shall be measured and paid under above mentioned relevent items. (ii) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced plumber/pipe fitter all as directed.The plumber with helper should present in complaint cell at 9.00 am on daily basis. (iii) The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 100/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues.Contractor rep shall be available wef 0800 hrs to 2000 Hrs to receive and notify the complaint. (iv) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 hrs the facts shall be brought to the notice of Engineer-in -charge by the contractor /his rep . If Engineer -in-charge is satisfied with contractors view, no recovery will be made. (v) Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fitting and fixtures will be measured and paid separetely under respective item of Sch A. (vi) The pipe fitter shall always be in possession of die set complete with cutters , Taps , Pipe wrench, Chain wrench,Caulking tools, Complete set of spanners and ladders etc…, as required at site. (vii) The complaints for the above work shall be collected by contractor rep from MES maint incharge on daily basis.Required stationary such as complaint register ,job card etc shall be arranged and maintained by contractor.

Run lead including spurn yarn suitable for 80mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed.

Run lead including spurn yarn suitable for 100mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed.

Run lead including spurn yarn suitable for 150mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed.

Note for Srl Item No.32 to 34 (i) Any material such as Lead, spun yarn, CI specials, Lead joints,D-joints,Mechanical joints,clamps joints etc required for attending complaints shall be measured under above mentioned relevent items. (ii) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced plumber/pipe fitter all as directed. (iii) The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 100/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues.Contractor rep shall be available wef 0800 hrs to 2000 Hrs to receive and notify the complaint. (iv) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 hrs the facts shall be brought to the notice of Engineer-in -charge by the contractor /his rep . If Engineer -in-charge is satisfied with contractors view, no recovery will be made. (v) Cutting/welding/connecting/threading of CI/DI pipe in position and threading for insertion of CI/DI/GI specials and fittings is also deemed to be included in the job rate (Fitting and fixtures will be measured and paid separetely under respective item of Sch A. (vii) The pipe fitter shall always be in possession of die set complete with cutters , Taps , Pipe wrench, Chain wrench,Caulking tools, Complete set of spanners and ladders etc…, as required at site. (ix) The complaints for the above work shall be collected by contractor rep from MES maint incharge on daily basis.Required stationary such as complaint register ,job card etc shall be arranged and maintained by contractor.

M&L for Lifting defective submersible pumpset, column pipes (any number) from bore well (any depth/size), setting aside and stacking column pipes for reuse, lowering of submersible pumpset alongwith column pipes in the bore well as existing and making water and electrical connections as existing for running of pump motors complete all as directed. Notes : (i)Lifting / lowering shall be measured and paid only once for same nature of repair. (ii) Contractor shall attend and rectify the breakdown within 12 hours failing which a recovery of `Rs 500/hour shall be effected. (iii) In case the submersible pump set falls down during Extn/ Lowering/Lifting, No extra payment to be made to the contractor for this work.

Supply only rubber gasket required against Serial Item No 36 here-in-before as per existing dia, complete all as specified & directed.

Supply only nut and bolt and washer required against Serial Item No 36 here-in-before as per existing dia and length, complete all as specified & directed.

Repairs to submersible pumpset of capacity 30 - 35 HP, 3 phase, 415 volts involving the following operations : (a) Opening of the defective motor in MES yard / pump house/ workshop, cleaning the covers and parts as applicable in presence of Engineer-in-Charge to ascertain the quantum of defects and repairs involved. (b) Transporting the defective motor to contractor's workshop for repairs as directed by the Engineer in Charge and carrying out the needful repairs including replacement of defective unserviceable parts. (c) Assembling the motor after repair.d) Spray painting the repaired motor externally with two coats of synthetic enamelled paint of shade as approved by the Engineer-in-Charge. (e) Transporting the repaired motor to MES yard/ workshop and carrying out necessary test in presence of Engineer-in-Charge to establish the functionability of the repaired motor up to the entire satisfaction of the Engineer-in-Charge.

All as per the description of Serial Item No 38 here-in-before but for submersible pumpset of capacity 20 to 25 HP complete all as specified and as directed.

All as per the description of Serial Item No 38 here-in-before but for submersible pumpset of capacity 15 to 17.5 HP complete all as specified and as directed.

All as per the description of Serial Item No 38 here-in-before but for submersible pumpset of capacity 10 to 12.50 HP complete all as specified and as directed.

All as per the description of Serial Item No 38 here-in-before but for submersible pumpset of capacity 5 to 7.50 HP complete all as specified and as directed.

Supply & Fix the following item to be incorporated against Serial Item No 38 to 42 above: suitable for submersible pumpset of capacity 5 HP to 35 HP.

Water lubricant seal suitable for motor

Bowl assembly

T-bolt for motor

Thrust bearing for motors as per existing

MS Flanged reducer as per existing

Stud as per existing size

Neck ring

Stainless steel key for impeller shaft

Impeller ( CI)

Stainless steel motor - pump coupler

Bush (gun metal) for pump as per existing

Bush (rubber) for pump as per existing

Repair to pump shaft

Repair to motor shaft

Bush to motor shaft as per existing

Repair to impeller by brazing or as required for 5 to 35 HP Pump set complete all as specified and directed.

Sand guard

Motor adaptor

Impeller sleeve(SS)

Rewinding of stator/rotor of submersible motor pump working on three phase 415 Volt to 440 Volts of capacity 5-7.5 HP with water proof insulated copper wire of existing gauge (IS 8783:1995)and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding complete all as specified and directed. Make of wire : Atlas/ Devidayal.

Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts of capacity 10 to 12.5 HP with water proof insulated copper wire of existing gauge (IS 8783:1995)and size to achieve the specified / required RPM including taking out old unserviceable winding complete all as specified and directed. Make of wire : Atlas/ Devidayal.

Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts of capacity 15 to 17.5 HP with water proof insulated copper wire of existing gauge (IS 8783:1995) and size to achieve the specified / required RPM including taking out old unserviceable winding complete all as specified and directed. Make of wire : Atlas/ Devidayal.

Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts of capacity 20 to 25 HP with water proof insulated copper wire of existing gauge (IS 8783:1995)and size to achieve the specified / required RPM including taking out old unserviceable winding complete all as specified and directed. Make of wire : Atlas/ Devidayal.

Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts of capacity 30 to 35 HP with water proof insulated copper wire of existing gauge (IS 8783:1995)and size to achieve the specified / required RPM including taking out old unserviceable winding complete all as specified and directed. Make of wire : Atlas/ Devidayal.

Cleaning the Over Head Tank of capacity 50000-100000 Gallons (twin or single chamber) by draining the complete water and brushing the surfaces with iron brush and removing the complete mud/silt and getting washed the complete inner surfaces of the tank using the bleaching powder and applying a coat of white wash inside the tank including bottom, sides and ceiling and writting date of cleaning the tank out side complete all as specified and directed. Note : All T&P Required for cleaning is deemed to be included in the unit rate quoted.

S&F and testing Cast lron sluice valve, non-rising type conforming to IS-14846-2000, sutiable for 150 mm bore pipe consisting of SS spindle as per IS 6603, Cast iron Body, Dome & Wedge as per IS 210, greasy jute type gland packing, fasteners as per IS 1367, Natural rubber gasket, CI manual hand wheel etc complete double end flanged and drilled, of Class PN-1 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc including taking out old unserviceable sluice valve from pipeline and removing from site complete all as specified and directed.

Supply and fix gun metal gate valve confirming to IS : 778/1980 CL-1 with iron wheel head screwed both ends for iron pipe of size including dismantling old one.

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying pipes or foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n.exc 10sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in any type of soil.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed

Taking out Cast iron water main / Ductile iron pipe line (including all fittings) with spigot and socket ends /Flanged pipes including burning out lead joints and recovering lead and removing to store for reuse complete all as specified and as directed :- Note : Excavation and earth work shall be measured and paid separately.

80 mm dia bore

100 mm dia bore

150 mm dia bore

Supply, fixing and laying ductile iron pipe, socket & spigot with bulb type rubber tyton gasket and jointing material as per standard complete of class K-7 confirming to IS: 8329:2000 (latest revision) ISI marked of following sizes complete in trenches/ on pedestals etc complete mortar lining (CML) and outside black bitumen coatingetc complete all as directed. Note: ( Earth work incudes excavation, returning & filling and removal, DI fittings will be measured and paid separate where required).

80 mm dia bore

100 mm dia bore

150 mm dia bore

M & L for cast iron/Ductile iron fitting confirming IS 9523/2000of class K-12,PN-10 for spigot and socketed pipe such as bends ( any type,radius and angle) tapers any type (straight,bend,radius,and angle) tapers any type (straight,bend,increasing,decreasing or double socket etc),Tee pieces single branch ,Y junction,double branch, cross (all sockets or socket and spigot) collars caps and plugs upto 200 mm bore pipes all as directed.(Note: Excavation and earth work shall be measured and paid separately.)

Taking out existing old unserviceable /rusted / broken galvanised iron water main pipe line (including all fittings) and removing to store for reuse complete all as specified and as directed :- Note : Excavation and earth work shall be measured and paid separately.

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

80 mm dia bore

100 mm dia bore

Supply and laying , connecting and testing galvanised iron medium grade water tubing with all fittings and fixtures (ISI marked) confirming to IS:1239 laid in trenches or fixed on wall or in any position including necessary saddles and iron clamps complete of following sizes :- Note: The work shall be carried out at various locations under GE Kaluchak and including on external building walls upto a height of 4th story .Rates quoted includes for necessary scaffolding arrangement.

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

80 mm dia bore

100 mm dia bore

Servicing and maintenance of existing Chemical Dosing system suitable to inject solution upto 25 LPH comprising dosing pump coupled with three phase electric motor of capacity 0.5 HP, 1440 RPM assembly with agitator in one motor, agitator with SS sweep blade duly FRP coated, FRP tank 150 ltrs capacity, complete unit of make satya sai including replacement of unserviceable part at site chemical dosing system & changing of Teflon gland packing and cleaning of NRV set, checking the complete system complete all as specified and as directed.Make of Plant : Sathya Sai Services .Notes :1. Servicing shall be carried out by the company rep and the rate for this shall deemed to be included in item. 2. Spares shall be of original manufacturer only.3. Spares shall be paid and measured and seperately under as Supply only as mentioned here-in-after :-

PVC adopter for suction and delivery without NRV.

PVC strainer washer type heavy duty or Y type strainer for suction.

Teflon gland square type 3 mm

Chemical Oil seal with cap

Monoblock pump set capacity 0.5 HP suitable for chemical dosing plant all as per specified and directed by Engr - In - Charge

Supply & Fix Alum crystal in 50Kg bag to settle down the suspended impurities all as directed.

Supply & Fix copper sulfate of superior quality complete all as directed.

M&L for carrying out physical, chemical & Bacteriological analysis all as per IS 10500:2012 for Drinking water (Fresh potable/raw water from Pump Houses at various locations under GE Kaluchak) from approved govt or other approved labs .Note : The rate quoted deemed to inclusive of collecting and transporting water sample in Sterilised bottle/PVC container & submitting the same for testing on same day .Note: water sample from one borewell will be considered as one job.

M&L for taking out CI/MS/DI pipe flanged type 150mm/100mm dia of rising main/delivery /over flow of Over head reservoir of height 30 metre , cleaning, welding and refixing with replacing nuts and bolts,rubber gasket/gland packing etc incld replacement of sluice valve as required at site and as directed by Engineer in charge.Note: The work shall be carried out at various linstallations under GE Kaluchak .Rates quoted includes for necessary scaffolding arrangement upto a heigfht of 30 metres.The sluice valve shall be measured and paid separately under respective items.

Repacking stuffing box of sluice valve spindle,replacement of worn out check nuts,repairs to gate assembly,replacement of jointing materials such as rubber gasket ,nuts bolts and washers gland rope including taking apart and reassembling for 80mm bore complete all as specified and directed.

Repacking stuffing box of sluice valve spindle,replacement of worn out check nuts,repairs to gate assembly,replacement of jointing materials such as rubber gasket ,nuts bolts and washers gland rope including taking apart and reassembling for 100mm borecomplete all as specified and directed.

Repacking stuffing box of sluice valve spindle,replacement of worn out check nuts,repairs to gate assembly,replacement of jointing materials such as rubber gasket ,nuts bolts and washers gland rope including taking apart and reassembling for 150mm bore complete all as specified and directed.

Taking out sluice valves ,refacing,regrinding ,threading and refixing for 80mm bore complete all as specified and directed.

Taking out sluice valves ,refacing,regrinding, threading and refixing for 100mm bore complete all as specified and directed.

Taking out sluice valves ,refacing,regrinding, threading and refixing for 150mm bore complete all as specified and directed.

M&L for packing glands of size 6-10mm complete all as specified and as directed.Make: Spitmaan/ champion

M&L for packing glands of size 11-25mm complete all as specified and as directed.Make: Spitmaan/ champion

Supply and fixing in replacement column pipe MS 80 mm bore ISI MARKED 3 Mtr length each welded with MS flanged drilled for nut bolt and washer including rubber gasket 3 mm thickcomplete all as specified and directed.

Supply and fixing in replacement column pipe MS 100 mm bore ISI MARKED 3 Mtr length each welded with MS flanged drilled for nut bolt and washer including rubber gasket 3 mm thick. complete all as specified and directed.

Supply, laying and testing PVC insulated and sheathed flat 3 core 6 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including taking out old unserviceable cable complete all as specified and directed.

Supply, laying and testing PVC insulated and sheathed flat 3 core 10 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including taking out old unserviceable cable complete all as specified and directed.

Supply, laying and testing PVC insulated and sheathed flat 3 core 16 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including taking out old unserviceable cable complete all as specified and directed.

M&L for pumping out water and sediments from swimming pool of capacity 11 lakh litres situated near APS Kaluchak and carrying out cleaning complete after scrapping out fallen paint funai,voids etc by using mechanical scrappers brushes and cleaning with fresh water and applying lime/stable bleaching powder solution diluted in water drying for two hours washing out with clean water , cleaning the external area of the swimming pool complete all as specified and directed by Engineer in Charge.Note: The water inside shall be vacated by the Contractor by providing pump of suitable capacity at his own arrangement the entire scope of item shall be carried out in period of 24 hours so that swimming pool can be bring back into operation within 24 hrs complete all as specified and directed.

S&F and testing Cast lron sluice valve, non-rising type conforming to IS-14846-2000, sutiable for 100 mm bore pipe consisting of SS spindle as per IS 6603, Cast iron Body, Dome & Wedge as per IS 210, greasy jute type gland packing, fasteners as per IS 1367, Natural rubber gasket, CI manual hand wheel etc complete double end flanged and drilled, of Class PN-1.6 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc including taking out old unserviceable sluice valve from pipeline and removing from site complete all as specified and directed.

All as per above item but but of size 80 mm dia

M&L for cast iron non return valve single door confirming to IS 5312, Part-1 / BS EN 12334 (BS 5153) suitable for 150mm bore pipe class PN 1.6 gun metal sheat and flap with flanged and drilled flanged ends including having bypass arrangement complete all as specified .

Material and labour for PCC 1:4:8 type -D2 using 40mm graded aggregate in fdn filling and mass complete for pipe line supports or any indicated position all as specified and directed.

M&L for chlorine test kit with coloured sample complete with all testing fitments and OT solution in rexene finish box.

Supply only OT solution for chlorine test 500 ML bottle complete all as specified and directed.

Supply and testing of High strength Calcium based granular disinfectant in air tight container for water, treatment, more stable than chlorine gas, and stronger than Bleaching Powder, and calcium Hypochlorite (chlorine content 65% to 70%) of following specifications : (a) Chemical analysis & physical observations : Description : Whitish granules Granular size (Mesh passing through – 100 BSS) : 1.1 (± 0.1) % , Water / moisture: 5.00 (± 0.2) % Other insoluble Calcium salts: 1.1 (± 0.1) % Mercury & other Heavy Metal contaminants : BDL. The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems. (b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh liters of water: Requirement must be 100 gm. per one lakh litre of water to achieve 05-1.0 ppm Av. Cl. at injection point (site & raw water quality variations may apply additionally). (c) Stability: Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. Note: The Contractor shall provide original test certificate with hologram to the Engineer in charge .

M&L for painting of pump motor, rising mains, delivery mains and distribution header, distribution diagrams which includes sluice valves, NRV fittings, sockets, elbows etc , rising mains of overhead tanks, overflow mains, delivery mains of overhead tanks with color coding of various tubewell installations as directed and specified by Engr in charge (Rate quoted will be composite of material, labour and T&P throughout the periodicity as and when required)

Supply, installation, testing and commissioning of CPRI approved, factory made, LT Feeder Pillar Box cubical, Outdoor type, floor mounted double door, 3 phase 4 wire, 50 cycles, 415 Volts. The panel board shall be made of 3.15 thick CRCA sheet for load bearing members and 16 SWG (1.6 mm thick) for doors covers and internal partitions and shall be powder coated both side. Base frame of the panel shall be made of ICMC channel of size 50 x50 x 6mm, duly grouted on platform made of brick work in CM (1:2:4), 15mm thick plastering in CM (1:6) having minimum height of 450mm. The panel shall be provided with separate compartments for each switch gears with hinged door including interlocking with switch gears. The panel board shall be suitable for AC, 415 Volts, 50 Hz, 3 phase, 4 wire supply complete with epoxy insulated 400 Amps rated high conductivity aluminium bus bars, supported with DMC / SMC barriers and coluor coded, prewired with copper cable, the degree of protection is IP-54. the panel shall be complete with instrumentation such as LED phase indicating lamps and CT's, including extended aluminium strip of rating of Incomer and outgoing as per rating of MCCB’s, including aluminium lugs to connect the cable dismantled before etc., and comprising of the following:- (a) MCCB 250 Amps, 4 pole with breaking capacity 25KA (Adjustable thermal & magnetic release) - 01 Nos(Incomer) (b) MCCB 125 Amps, 3 pole with breaking capacity 25KA (Adjustable thermal & magnetic release) - 03 Nos(Spare) (c) MCCB 63 Amps, 3 pole with breaking capacity 25KA (Adjustable thermal & magnetic release) - 01 Nos(Spare) (d) Panel mounted change over switch capacity 100Amp 4 Pole - 01 Nos (e) Digital Volt meter (f) Digital Ammeter meter . (g) Indicator lamp RYB :01 Set, (h) CT'S 200/5 01 Set

Attending day to day (including sundays and holidays) external/internal water supply complaints/breakdowns of all nature i.e leakage in galvanized iron water supply pipe lines of bore 15mm to 80mm/ fitting/fixture,leakage in water pumping sets, over flow of overhead tank, no water supply, taking out water from trenches during repair including necessary excavation ,returning filling and removal as per site requirement complete all as directed. Note: (i) Any material required for attending complaints shall be measured and paid separately under respective item herein after. (ii) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced plumber/pipe fitter ( 2 nos pipe fitter & 2 nos helpers) as applicable assisted with adequate No of helpers as directed. (iii) The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 50/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues.Contractor rep shall be available wef 0800 hrs to 2000 Hrs to receive and notify the complaint. (iv) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 hrs the facts shall be brought to the notice of Engineer-in -charge by the contractor /his rep . If Engineer -in-charge is satisfied with contractors view, no recovery will be made. (vi) Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fitting and fixtures will be measured and paid separetely under respective item of Sch A. (vii) All Transport, T & P such as JCB / Dewatering pumpset /DG set equired for attending the complaints shall be provided by the Contracor. (viii) The pipe fitter shall always be in possession of die set complete with cutters , Taps , Pipe wrench, Chain wrench,Caulking tools, Complete set of spanners and ladders etc…, as required at site. (ix) The complaints for the above work shall be collected by contractor rep from MES maint incharge / JE E/M on daily basis.Required stationary such as complaint register ,job card etc shall be arranged and maintained by contractor.

Supply and fixing Copper socket and lugs of appropriate size after disconnecting the cable of any size 1100 volt grade from panel and de -reeling the loop, including cutting out and removing the burnt portion of the cable end and relaying the serviceable portion in the existing position/ layout including necessary earthwork, chases cutting in PCC work , taking out and relaying bricks and making good the disturbed surfaces and testing complete all as specified and as directed

Cleaning the entire area within the fencing/ boundary wall of tubewell installations which includes cutting of bushes/shrubs/unwanted grass in the periphery/surronding of complete installation i.e O/H reservoir, Gen rooms, Clear water sumps, removing unwanted grass at the complete installation including sweeping of whole area and disposal of all the removed material as directed after cutting/cleaning. The plinths around the complete buildings at installation is to be maintained free from any type of grass and cleaning complete all as directed and specified by Engr in charge. (The entire job to be operated two times doing the complete work)

Please Enable Macros to View BoQ information