REPAIR CLEANING OF SEWAGE LINE MANHOLES CONNECTED WORKS IN OUTSIDE POCKET AREA AT AF STATION GWALIOR

Amount

Cleaning of chocked /blocked sewage lines of any bore, of any description and in any position by taking out loose sediment sand, grit, ash, sludge, rags, fibers or vegetation from the following depth of sewage line or by rodding/by mechanical means and well flushing with adequate water including removal of sludge/debris to a distance exc 250 m but nex 500m and buried under ground complete all as as specified and as directed. (a) Upto 1.00 M depth

(b) Exceeding 1.00 M and n exc 1.5 M depth

(c ) Exceeding 1.5 M and n exc 3.00 M depth

Opening & cleaning of blockage from kitchen /bath traps or WC any pattern by rodding or manually upto Ist manhole complete all as directed .

Cleaning of manholes of depth not exc 1.5 M deep mechanically or manually by taking off sludge/any deletrious material from the existing manhole of any size and removing the sludge to a distance beyond 2.00 KM from the habitation in sealed container and depositing the same complete all as specified and directed.

All as per item No-3 here in before but depth exc 1.5 M and n exc 3.00 M deep complete all as specified and directed

M&L for puncturing existing RCC/ SGSW pipe line of any dia at any places between manholes for cleaning blockage in pipes including necessary excavation, returning, filling in and removal of soil and making good the punctured area with CM 1:1 including cutting/ clearing away grass, vegetation, saplings, shrubs, bush, wood, undergrowth, roots along pipeline both sides upto a distance 2 Metre complete all as specified and directed.

Demolition of brick work built in cement mortar and incl all quins, arches, pillars etc complete all as specified and directed

M&L for brick work with sub class 'B' bricks old size , straight or curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and as directed.

All as per item No. 7 here-in-before but except bricks complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 CM thickness below or above ground level complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing & rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8 mm thick area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic tiles ( 450 x 300 mm size) 6-7 mm thick coloured for work on vertical surfaces such as skirting and dado/riser etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces as in backing for tiles in dados/skirting complete all as specified and directed.

Taking down cement plaster from brick or stone walls, etc including raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick plaster in CM 1:4 on fair faces of brick work , finished even & smooth without using extra cement mixed with and incuding water proofing compound as per manufacturers instructions complete all as specified and directed.

M&L for 15 mm thick plaster in CM 1:6 on fair faces of brick work , finished even & smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (Powder) complete all as specified and directed. Make: Water Seal from Acro Paint, Impermo from Snowcem, Accoproof from ACC, Pidilite Industries Ltd

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate), as in coping, benching, kerbs, bedblocks including necessary form work complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 ( using 20 mm graded aggregate) as in surface channels, drain and similar nature of work complete all as specified and as directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including replacement of cast iron P Trap of size 100 mm including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR complete all as specified and directed.

Cutting of trees' roots penetrated into manholes /sewage line /trap etc of any girth and at any depth including application of hot bitumen to arrest sprouting and filling up the gap and making good the disturbed portion with and including cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) complete all as specified and directed.

M&L for extra forming fair finished drain or channel 30 cm innner girth in cement concrete using extra cement including forming moulds mitred/stopped ends etc complete all as directed by Engineer-in-charge

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified & directed.

Fixing Only repair PVC valveless, symphonic action type low level flushing cistern of any type and capacity after and including necessary minor repair work as required at site complete all as specified & directed.

Excavation in trenches in soft/loose soil n exc 1.5 M wide & n 'exc 1.5 M in depth as in foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches in soft/loose soil n exc 1.5 M wide, 'exc 1.5 M but not exc 3.0 M in depth as in foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Demolition and breaking up drain pipe, soil waste and vent pipe (CI/SGSW/RCC pipe) including fittings of any size laid in trenches or in floors etc jointed in cement mortar complete all as specified and as directed.

Demolition and breaking up of 75/110 mm bore PVC/CI pipes fixed along walls/floors etc complete all as specified and directed.

Returning & filling- in soil including spreading, levelling watering and well ramming in layers not excd 25 cm thick each complete all as specified and as directed.

Removing excavated material to a distance exc 0.50 Km but not exc 1.5 km and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

M&L for 150 mm dia internal SGSW pipes Gde 'A' quality laid in trenches jointed in CM 1:1 and tested after the pipes are laid and jointed complete all as specified and as directed.

S&F 200 mm bore reinforced concrete pipes class NP-2, laid in trenches and jointed with collars complete all as specified and directed.

S&F 150 mm bore reinforced concrete pipes class NP-2, laid in trenches and jointed with collars complete all as specified and directed.

M&L for concrete bed to pipes in PCC (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid to slope and tested for 150 mm bore sewer pipe line complete all as specified and directed .

M&L for concrete bed to pipes in PCC (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid to slope and tested for 200 mm bore sewer pipe line complete all as specified and directed .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 6 to 8 mm dia mild steel TMT bars , cut to length, bent to shape required, including cranking, bending for slab , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for 10 mm dia and over mild steel TMT bars , cut to length, bent to shape required, including cranking, bending for slab , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and or riveted or forged into spikes, framed, barred iron door, ladders, fencing work, frame work for water tank/ MH Covers ect. conforming to Fe-290 Gde E-165 complete all as specified and directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts), providing and fiitings angle cleats, fish plates, gusset plate etc., also for welding plumbing, truing up and fixing complete. No claim whatso ever shall be entertained by Govt on this account.

S&F 1 mm thick PGI sheet, cut to size, holes punched and welded to MS frame work as in grease trap covers complete all as specified and directed.

M&L for precast RCC 1:1.5:3 mix, type A1 (using 20 mm graded stone aggregate) as in cover slab set in CM 1:4 incl necessary form work complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors including cutting out wall/concrete and finishing of surface to match existing surface complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors including cutting out wall/concrete and finishing of surface to match existing surface complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipe bend with accessible door of 75 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F PVC (SWR) pipe bend with accessible door of 110 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F PVC (SWR)branch piece single (single Y) equal or unequal bend with accessible door of 75 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F PVC (SWR)branch piece single (single Y) equal or unequal bend with accessible door of 110 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal with accessible door of 75 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal with accessible door of 110 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F 110mm dia PVC (SWR)vent cowl all as specified and directed.

S&F 110mm dia PVC (SWR) bends any radius all as specified and directed.

S&F 75 mm dia PVC (SWR) bends any radius all as specified and directed.

S&F in repairs PVC (SWR) floor trap 75mm outlet dia plain with grating including jointing with solvent cement including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

Dismantling old plain or corrugated Asbestos cement sheeting in roof coverings etc and remove materials from site of work complete all as directed.

Dismantling of timber scantling 40Sqm in section and over in any position (unframed) complete all as directed.

Dismantling of framed trusses n exc 10m in span etc complete all as directed.

M&L for Pre-painted galvalume alu. Zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces)

M&L for Pre-painted galvalume alu. Zinc coating GI based plain steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces)

S&F mild steel work as in Roof trusses, trussed purlines, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections)including distance pieces, cleats etc, conforming to Fe-290(Gde-E-165) complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.

M&L for preparation of new steel surfaces of any description exceeding 10 CM width or girth and applying two coats of synthetic enamelled paint over and including a coat of red oxide primer complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc laid dry and pointed rubbish off premises with entire satistaction of Engr-in-charge complete all as specified and directed.

M&L Granite of 20mm thick (of any type) work (table rubbed/moulding . and polished) in steps, jambs, pillars, window cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation etc complete all as specified and directed.

M&L for 60mm thick machine pressed,coloured, glossy finish(rubber moulded) precast cement concrete interlocking pavers/ tiles Grade M-35 made with grey cement and pigment any size, pattern and shape as approved by GE, laid dry over sand cushion in patterns with different colour paver block /tiles complete all as specified and directed. (Note : Sand cushioning and sub base will be measured seperately)

J.N.R. Engineers and Builders

M/s Shubham Construction Co.

lodhi builders

USHA TRADERS

M/s. Ravi and brothers

anand enterprises