REPAIRS TO SUNKEN PORTION, LEAKAGE AND SEEPAGE AND SANITARY FITTINGS AND DAY TO DAY B/R MAINT SERVICES AND INTERNAL WATER SUPPLY OF OTM AND MD ACCN IN AREA IV OF AGE B/R (WEST) AT COLABA, MUMBAI

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Make : Somany Pilkington / Orient bell / Kajaria.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make : Somany Pilkington / Orient bell / Kajaria.

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

M&L glazed tiles digital coloured ceramic tiles 300x450x7mm/300x600x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match the shades of the tiles all as specified and directed. Make : Somany Pilkington / Orient bell / Kajaria. Note:- Rate of designer border (Highlighter) tiles are included in this item.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, laid over 15mm thick cement mortar (1:4) all as specified and directed.

M&L granite (of any approved colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, counter for WHB, flooring and all other similar works all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store,15 mm bore all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store, 20 mm bore all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store, 40 mm bore all as specified and directed

Fixing only old 15 mm steel tubing with all fittings and fixtures and including cleaning in positon (walls, ceiling and floor etc) all as specified and directed

Fixing only old 20 mm steel tubing with all fittings and fixtures and including cleaning in positon (walls, ceiling and floor etc) all as specified and directed

S&F GI tubing 15mm bore medium grade with all fittings and fixtures to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

S&F GI tubing 20 mm bore medium grade with all fittings and fixtures to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

S&F GI tubing 40mm bore medium grade with all fittings and fixtures to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting not exc. 10cm girth all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe (excluding flushing cistern) including seat cover for pedstal pan all as specified and directed. Make : Cat Part No S1050102 of Cera or Equivalent in Hindware / Parryware.

S&F in repairs two peice vitreous China wash down water closet pan (pedestal pattern) white including trap, connection to drain and flushing pipe, including flushing cistern, including soft close seat cover for pedstal pan all as specified and directed. Make : Cat Part No S1021105 of Cera or Equivalent in Hindware / Parryware.

S&F in repair vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets all as specified and directed. Make : Cat Part No S2040139 of Cera or Equivalent in Hindware / Parryware.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories fixed with WC including syphone pipe, PVC flushing pipe of size all as specified and directed. Make : Cat Part No B1010106 of Cera or Equivalent in Hindware / Parryware.

S&F in repair counter sunk wash basin oval shape 550x460mm fixed with waste coupling & waste pipe & accessories of size all as specified and directed. Make : Cat Part No 10095 of Hindware or equivalent in Cera / Parryware.

S&F in repair wall mounted water closet pan of size 520x360x410mm fixed with anchor fastener, outlet pipe & accessories of size complete all as specified and directed. Make : Cat Part No20104 of Hindware or equivalent in Cera / Parryware.

S&F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed.. Make:- ESS ESS CROMA Cat Part No C 204 or Equivalent of Jaquar/Paryag

S&F as in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 332 or Equivalent of Jaquar

S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repair 40 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed screwed both ends for iron pipe or for unions all as specified and directed.

S&F PVC connection 15mm size PTMT nuts of length 450 mm all as specified and directed.

S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 202 or Equivalent of Jaquar

S&F in repair 15 mm bore fancy type 2-in-1 bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule with wall flange all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 203 or Equivalent of Jaquar

M&L in repair for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 216 or Equivalent of Jaquar .

M&L in repair for fancy type 15 mm bore central hole basin mixture with 'U' shaped round casted spout with 3" long pipe connection with aerator all as specified and directed. Make : Jaquar Cat Part No CON-169KNB or Equivalent of Prayag

S&F in repair 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1 metre long all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 232D or Equivalent of Jaquar/ Parko.

S&F in repair fancy type CP Towel Rail 61 cm long all as specified and directed. Make : ESS ESS CROMA Cat Part No C 412 or equivalent of Jaquar/ Parko.

S&F in repair CP Towel Ring all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 502 or Equivalent of Jaquar/ Parko

S&F in repair CP soap dish all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 414 or Equivalent ofJaquar/ Parko.

S&F in repair CP toilet paper holder all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 206 or Equivalent of Jaquar/ Parko.

S&F in repairs CP Towel rack 600 mm long without lower hangers but with 3 hooks, stainless steel all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 423 or Equivalent of Jaquar/ Parko

S&F sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed.

Supply and fixing 15 mm bore overhead shower of size 150x150mm single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 200 mm long (stainless steel) square shape with wall flange all as specified & directed. Make:- Cera Cat Part Not F7010506AB or Equivalent of Jaquar / Parko.

S&F in reapir double coat hook of make Jaquar Cat Part- No - 35761P or equivalent in prayag/ESSS

S&F in repair glass tumbler holderof make Jaquar Cat part No - AKP-35741P or equivalent in ESS/Prayag

S&F in repair jaquar shower panel with anti finger print stainless steel body, inbuilt ABS top shower with 50 nozzles, ABS body massage jets , chrome plated ABS hand shower brass spout multi function water diverter including all necessary fittings Jaq Brushed stainless steel (1400x200mm ) of make Jaquar Cat Part No JPL-SSF-ST8858B3 or equivalent make prayag/parko.

S&F in repair shower enclosers from jaquar with high quality glass panels and complements with uniquerly designed hard ware, wall to wall enclosure with one fixed glass and openable door fixed with wall, glass 8mm finish chrome cat part No JSE- CHR-R820W0812L, H-1950x800x1200 including all necessary fitting like nut but, holder, brackets and other material used for enclosure.

S&F in repair 15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified & directed. Make:- ESS ESS CROMA Cat Part No C 201 or Equivalent of Jaquar / Parko.

S&F in repair water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices all as specified and directed. Make : Cat Part No S1020101 of Cera or Equivalent in Hindware / Parryware.

S&F in repair sink with draining board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410 mm x 330mm x 160mm. all as specified and directed. Make : Blue Star Model No SBSD-127 or equivelant of Nirali / Prayag

S&F in repairs Kitchen sink without draining board made of stainless steel 1 mm thick, with plugs, washers and waste pipe & coupling including bedding in cement morter to dwarf wall or including fixing GI cantilever brackets as per site requirement and connecting with suitable size of pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 178mm (or nearest size as per Cat Part specified) all as specified & directed. Make : Blue Star Model No SSSB-06A or equivalent of Nirali / Prayag.

M&L in repair 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced all as specified and directed.

Material and labour for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete and sunken floor treatments all as specified and directed.

Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral foot rests (excluding flushing cisteren and flush pipe) including taking down existing squating pan all as specified and directed. Make : Cat Part No S3010104 of Cera or Equivalent in Hindware / Parryware.

Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) Birla wall care putty all as specified & directed. Make : Asian Paints / Berger Paints.

Dismantling Asbestos sheeting, any gauge, thickness, roof coverings including scafoldings of any height all as specified and directed.

Dismantling of framed work of timber in scantlings 40 sq. cm and over in section, in any position all as specified and directed.

Supply & fix pre-painted galvalume aluminium zinc coating GI based trapezoidal/mangalore tile profile roofing sheets, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws all as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg all as specified and directed.

Supply & fix pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F for joist, channel, angle or tee sections, or MS Flats fixed independantly without connecting plates,etc. Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas all as specified and directed.

S&F of structural steel work in tubular/square tube trusses including special shaped washer, gusset/ bearing plate etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 all as specified and directed.

Supplied and fixed in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght all as specified and directed.

Fixing only in repairs in patches including cutting out old, piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any height all as specified and directed.

Material and labour in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc second class hardwood wheather boarding , clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps and removing dismantled boarding in any situation including scafoldings of any hieght all as specified and directed.

Dismantling Mangalore pattern or similar tiles in roofing including portions bedded in cement mortar of any height including scafolding all as specified and directed.

Material and labour for roof tiles, Mangalore pattern, interlocking at side joints, laid dry including scafoldings of any hieght all as specified and directed.

Fixing only roof tiles, Mangalore pattern, interlocking at side joints, laid dry including scafoldings of any hieght all as specified and directed.

Material and labour for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 all as specified and directed.

Fixing only ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 including scafoldings of any hieght all as specified and directed.

Dismantling of roof battens for tiles, shingles etc, of any size including tilting fillets spaced n exc 15 cm of any description in any position all as specified and directed.

Material and labour second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scafoldings of any hieght all as specified and directed.

Fixing only second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scafoldings of any hieght all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scafoldings of any hieght all as specified and directed.

Material and labour for preparation of old decorated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scafoldings of any hieght all as specified and directed.

Material and labour in repair to replace old decayed timber( including piecing, scarifying, etc of old and mew timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scafoldings of any hieght all as specified and directed.

Material and labour for preparing surfaces of battens, any size and spacing, and treated all over with creosote (measured overall on one side only, spaces not deducted) including scafoldings of any hieght all as specified and directed.

M&L for providing and applying two coats of Fiber Reinforced elastomeric Liquid applied membrane of Asian Paints or equivalent make, having crack bridging ability upto 2.5 mm, resistance to positive hydrostatic pressure of upto 10 bars, superior anti-carbonation, 1st coat self-priming coat & 2nd coat undiluted coat ensuring force coverage of 30 Sq. ft/kg for 2 coat with 160 micron DFT, applying one coat of thick modified acrylic silica base texture (2mm to 2.5 mm thick) as per desired pattern and 8 hours two coats of Ultra durable pure acrylic exterior emulsion with Low VOC, Anti Algal, Excellent DPUR for dust pick up resistance of fading of colors ensuring 60 micron DFT for two coat including removing existing roof treatment and providing 25 mm thick PCC 1:2:4 all as directed by Engineer-in-Charge. Note : Item to be executed by authorised aplicator only. Make Asian Paints or equivalent.

Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work all as specified and directed.

M&L powder coated aluminium snap grid having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as per manufacturer's instruction. The main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturer's instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter all as specified and directed.

S&F 9mm thick PVC laminated gypsum ceiling tiles of size 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar, including all quoins, arches, pillars, etc all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius and built in CM (1:6) all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc including all necessary scaffolding arrangments at any height of bldg all as specified and directed.

M&L for cement mortar (general purpose, factory made, for outdoor use having bulk density (of dry mix) 1600 kg per cubic metre, wet density (after mixing) 1800 kg per cubic metre, dry density after setting 1800 kg per cubic metre, pot life 60 minutes, compressive strength 1.5 Mpa to 5 Mpa, made using well graded manufatured sand filler, portland cement & polymer binder, and chemical additives) for external rendering 12mm thick on brick wall or concrete surfaces including making groove of appropriate size and finishing sand faced finished using sponge including all necessary scaffolding arrangments of any height all as specified and as directed.

M&L for cement mortar (general purpose, factory made, for Indoor use having bulk density (of dry mix) 1600 kg per cubic metre, wet density (after mixing) 1800 kg per cubic metre, dry density after setting 1800 kg per cubic metre, pot life 60 minutes, compressive strength 1.5 Mpa to 5 Mpa, made using well graded manufatured sand filler, portland cement & polymer binder, and chemical additives) for internal rendering 10mm thick on brick wall or concrete surfaces including making groove of appropriate size and finishing sand faced finished using sponge including all necessary scaffolding arrangments of any height all as specified and as directed.

M&L for preparation of surfaces cracks of plaster internal/external of walls, ceilings/Chajjas upto 5 mm wide, remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat including necessary scafolding at any hieght of bldg all as specifed and directed. Make :- Use of Dr Fixit 'X' paste compound/ Build Core Compound / Fosroc Compound, as approved by GE through their authorised applicator only.

M&L for preparation of surfaces by cutting 'V' groove cracks of plaster internal/external of walls, ceilings/Chajjas all along the crack 5 mm to 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any hieght all as specifed and directed. Make : Use of Dr Fixit 'X' paste compound/ Build Core Compound / Fosroc Compound, as approved by GE through their authorised applicator only.

M&L for repair to damaged surface of RCC elements like beams, columns, wall by removing all loose cement plaster/concrete, providing and laying of micro-concrete more than 20mm thickness (Avg) by using the recommended water powder ratio mix the micro-concrete with pan mixer as per manufacturer's instruction including watertight shuttering necessary curing for 7 days all as specified and directed by Engineer - in - Charge.

M&L for preparation of surface of reinforced bar by applying rust remover and then applying a coat of epoxy zinc primer on exposed reinforced surface all as specified and directed.. Make : Use of Dr Fixit 'X' paste compound/ Build Core Compound / Fosroc Compound, as approved by GE through their authorised applicator only. Note : Surface area for concrete shall be measured for payment purpose.

M&L for preparing New surfaces of walls/ceilings and applying two coat of weather proof acrylic exterior paint (100% Acrylic) of Apex Ultima, over a coat of primer and scaffolding where required at any hieght for external paintingall as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall puttyall as specified and directed.

M&L for 5 mm thick plaster in CM (1:3) on ceiling surfaces and finish the surface even and smooth without using extra cement all as specified and directed.

M&L for preparation of new or previously untreated surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome all as specified and directed.

Material and Labour for prepartion of newly plastered ceiling surfaces and applying three coat of white wash all as specified and directed.

Demolation of RCC in any postion including cutting of reinforcement as required and removing of debries outside of MOD land all as specified and as directed.

M&L coloured double charged polished glazed vitrified tiles 10 mm thick (Square / Rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles all as specified and directed. Make : Johnson /Nitco / Kajaria

M&L coloured double charged polished glazed vitrified tiles 10 mm thick (Square / Rectangular) polished area of each tile not exceeding 0.36 sqm but not exceeding 0.42 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles. Make : Johnson /Nitco / Kajaria

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate, as in foundation of poles, filling or mass concrete all as specified and directed .

M&L for 50 mm thick PCC 1:2:4 type B1 using 12.5 mm graded stone aggregates as in floor finished cement concrete surfaces even and smooth using extra cement all as specified and directed.

M&L granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in skirting, steps risers, wall dado and similar works a and all other similar works all as specified and directed.

S&F in repair 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 all as specified and directed.

All as per item above but as in skirting/ riser/ dado etc with and including 10 mm thick backing coat in CM 1:3 all as specified and directed.

M&L parking tiles any shape and size and color in floors etc. with and including 20mm thk CM ( 1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles all as specified and directed by Engineer in charge

M&L 15 mm thick plaster in CM (1:6) on brick work/ RCC wall and finish the surface even and smooth without using extra cement all as specified and directed.

Materials and labour complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified. Make : Asian Paints / Berger Paints / Nerolac

M&L for preparation of newly plastered ceiling surfaces and applying two coats of white wash all as specified & directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emlusion distemper ver a coat of alkali resistance primer over a coat of wall care putty of 1mm thick all as specified & directed.

M&L for Preparation of old decorated surfaces of walls by washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper (oil emulsion) on walls all as specified & directed.

M&L for Preparation of old decorated surfaces of ceilings by washing, rubbing down and stopping and applying one coat of oil bound distemper (oil emulsion) on ceilings all as specified & directed.

M&L for complete removal of old decorated steel surfaces of any description over 10 cm width or girth, applying two coats of epoxy paint over a coat of epoxy primer all as specified & directed.

Taking down chowkats or frame with shutter (without taking off shutter from frame) area exc 1.5 sqm but n exc 4 Sqm each all as specified & directed.

Taking down chowkats or frame with shutter (without taking off shutter from frame) area n exc 1.5 sqm each all as specified & directed.

S&F powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, glazing, screws, handles, hinges, tower bolts all as specified & directed. Make: JINDAL/HINDALCO/INDALCO. Notes :- (i) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required which shall not be measured for arriving the weight. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

S&F Factory made 35 mm thick 2nd hard wood plain framed panelled shutters (any numbers of panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS :1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats all as specified and directed.

S&F 2nd class hard wood Glazed and skelton shutter 30mm thick open rebated and prepared to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows ventilator styles and rails provided as per SSR part -I Sector 8 clause 8.24 (b) all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint all as specified and directed.

M&L 5.50 mm thick sheet glass, ordinary quality and glazing with oil putty or with wooden beading in squares n exc 0.50 sqm in each pane all as specified and directed.

M&L 5.50 mm thick figured glass, pin head type and glazing with oil putty or with wooden beading in squares n exc 0.50 sqm in each pane all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, decorative type on both side all as specified & directed.

M&L in repair for 18 mm thick pre-laminated Plywood , interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber work as in kitchen cup board shutters and all other similar works including 1st class teak wood lipping over cut surfaces all as specified and directed.

M&L in repair 150 mm long aluminum, anodised, barrel tower bolt of extruded section all as specified and directed.

M&L in repair for 75 mm long aluminum, anodised, barrel tower bolt of extruded section all as specified and directed.

M&L in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and directed.

S&F in repair 100 mm size butt hinges, medium weight, cold rolled mild steel all as specified and directed.

S&F in repair 75 mm size butt hinges, medium weight, cold rolled mild steel all as specified and directed.

S&F in repair mild steel 300 mm, ordinary rat tail rod patteren springs,including roller and roller plate all as specified and directed.

S&F in repair 150 mm size extruded aluminium alloy handles, fabricated type anodised pattern/design as approved all as specified and directed.

S&F in repair 75 mm size extruded aluminium alloy handles, fabricated type anodised of pattern/design as approved all as specified and directed.

S&F in repair brass 7 levers mortice night latch, size 100 mm including safety chain all as specified and directed.

S&F in repair brass hat and coat hooks, solid body, 175 mm to 250mm all as specified and directed.

S&F in repair aluminium plate type II gate and shutter, hooks and eyes 200 mm size all as specified and directed.

S&F in repair 40 mm dia, cupboard knobs fixed with nut, screws and washer of brass, polished all as specified and directed.

S&F in repair 150 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S&F in repair aluminium (extruded section body) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including beading all as specified and directed.

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including beading all as specified & directed. Note :- Rate inclusive of fixing wire cloth in wooden as well as in aluminium frame

Supply and fixing in repairs 20mm dia decorative type curtain rods chromium plated anodised aluminium all as specified and directed.

Supply and fixing in repairs curtain brackets, 20mm dia, decorative/ fancy type, made of brass all as specified and directed

Supply only water proofing chemical Pidiproof LW+ of Dr. Fixit or Equivalent.

Carrying out maintenance of plumbing complaints by engaging one plumber (skilled) with T & P for general day to day all plumbing complaints (from 0900 hours to 1700 hours), for day to day repairs to WHB & WC with connections and fittings like as leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer, repair to float valves, repairs to internal assembly low level cistern by adjustments, etc, repairs to internal leakage and brokage of GI and PVC pipelines as required at site to cater the satisfaction of user as assigned, with and including all minor spare parts, material & labour all as specified and directed. Note :- (a) Rate inclusive of complaints upto 13th floor of the building and removing rubbish upto a distance of 250 m outside the periphery of the area. (b) One Plumber and one helper/mazdoor shall be detailed daily for area of AGE B/R (West) Colaba for the purpose of rendering all plumbing complaints through out the contract period. In case of failure to deploy man power for any reason whatsoever may be, necessary penalty will be levied as specified in respective PS Clause. (c) In case of urgent complaint shall be rectified within three hours from the time of intimation. (d) The rates quoted shall be deemed for attending day to day complaint and make functional the entire complaints on a daily basis at area of AGE B/R (West) Colaba.

Carrying out maintenance of Carpenter complaints under area of AGE B/R (West) by engaging one carpenter (skilled) with T & P for general day to day carpenter complaints (from 0900 hours to 1700 hours), such as door/window easing, refixing of old aluminium mongery, hinges, tower bolt, handles, curtain rod, wiremesh etc in situ. with and including all minor spare parts, material & labour all as specified and directed. Note :- (a) Rate inclusive of complaints upto 13th floor of the building and removing rubbish upto a distance of 250 mtrs outside the periphery of the area. (b) One carpenter shall be detailed daily for AGE B/R West area for the purpose of rendering the Carpenter complaints through out the contract period. In case of failure to deploy man power for any reason whatsoever may be, necessary penalty will be levied as specified in respective PS Clause. (c) In case of urgent complaint shall be rectified within three hours from the time of intimation. (d) The rates quoted shall be deemed for attending day to day complaint and make functional the entire Carpenter complaints on a daily basis at AGE B/R West area.

Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:4) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m), (e) M&L for PCC 1:7 :12 for filling of sunken portion after conceling all menbrane and sealing all joints to the entire with broken bats and light weight all as satisfaction of Engineer-in-Charge.

SRI SAIRAM COUNSTRUCTION

Shrikant Enterprises

Bright Construction Co

Unitech Enterprises

Frends Enterprises

RAJU ENTERPRISES

Vandan Enterprises

Bidder Name

Unitech Enterprises

Frends Enterprises

SRI SAIRAM COUNSTRUCTION

ASHOK CONSTRUCTION

Vandan Enterprises

RAJU ENTERPRISES

Bright Construction Co

Shrikant Enterprises