SPL REPAIRS (BLDG) TO BLDG NO P 111 3 AT GTOC AND SPL REPAIRS (BLDG) TO FLOOR TILING IN BLDG NO P 44 (OR MD ACCN NEELSANDRA LINE) AT CMP CENTRE AND SCHOOL UNDER GE (SOUTH) BANGALORE

Amount

Dismantling floor hearth/ stone slabs/mosaic tile flooring or wall tiling including cement mortar bedding (but not backing) and removing servicebale tiles to stores and rubbish outside MD land complete all as specified and as directed.

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc complete all as specified and as directed.

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in vertical surface/skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a backing coat of 10mm thick in CM 1:4 etc complete all as specified and as directed.

S&F coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick cement mortar 1:4 as backing coat complete all as specified and as directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc & brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and as directed.

S&F light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over a screed bed of 15mm thick in cement mortar 1:6 etc complete all as specified and as directed

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 500 ltr and n.exc 1000 ltr tanks, setting aside (or lowering if required) for repairs, cleaning etc, and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Dismantling of old water proofing treatment and roof tiling including screed bed and cleaning the surface with wire brushes removing dust, foreign material and rubbish off the same out side the MD land complete all as specified and as directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors/roofing as levelling course complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof kerb or mud stops, rounded or chamfered as padding concerete complete all as specified and as directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 on roof surfaces mixed with WPC @3% by weight of cement finished the surfaces even and smooth without using extra cement complete all as specified and as directed. (Note : WPC will be measured and paid separetly)

Supply only Integral water proofing compound complete all as specified and as directed.

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under :- (a) Applying bitumen primer at the rate of 0.27 Ltr per qm as per IS 3384-1986 and bonding bitumen of VG-10 @ 1.2 Kg per sqm (b)APP Modified water proofing membrane as per IS 16540/ 16532-2017 mineral finish, 3mm thick and reinforced polyester /HMHDPE mat black finish over compatible primer / bonding bitumen and finishing the top surface with bituminus aluminium finishing the top surface with bituminus aluminium paint @ 0.10 Ltr per sqm complete all as specified and as directed.

S&F chequered cement concrete tiles 30 cm x 30 cm x 10 mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1998 grade St.-240 complete all as specified and directed.

Cutting holes in brick walls built in cement mortar exc half brick wall but n.exc one brick wall for inserting holdfasts and making good disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and as directed.

Taking down, easing, adjusting and refixing in same opening as required, shutters of any description n. exc 1 Sqm complete all as specified and as directed.

Taking down, easing, adjusting and refixing in same opening as required, shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and as directed.

S&F 200 mm long aluminium anodised barrel tower bolts and extruded section and fixed complete all as specified and as directed.

S&F 100 mm long aluminium anodised barrel tower bolts and extruded section and fixed complete all as specified and as directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed .

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy fixed complete all as specified and as directed.

S&F 375 mm long mild steel, ordinary quality rat tail rod pattern springs, incl roller and roller plate complete all as specified and as directed.

S&F in repair aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S & F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane fixed in wooden/steel frames with necessary beading including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and directed.

S&F 4.0 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and directed.

Securing glass of any description in existing wooden frames glazed with putty/beads incl removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves reputtying to match with the existing work (New length of frame reputtied shall be measured) complete all as specified and directed.

M&L for 12 mm thick plywood, grade BWR, type BB, fixed with nails as in drawers in narrow width complete all as specified and as directed.

S&F in repairs 18/19 mm thick prelaminated particle board, interior grade pre laminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and as directed.

S&F in repairs 25 mm dia fancy type stainless steel curtain rod complete all as specified and as directed.

S&F in repairs fancy type 25 mm dia stainless steel bracket (approved) with screws including wooden plugs complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints,hacking for key,scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling or similar surfaces and applying three coats of white wash etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coats of synthetic enemel paint complete all as specified and as directed.

M&L for complete removal of existing treatment of walls and applying two coat of oil bound distemper over a coat of primer over 3 mm thick wall care putty complete all as specified and as directed.

M&L for complete removal of existing treatment of walls and applying two coats of whtie wash complete all as specified and as directed.

M&L for complete removal of existing treatment on ceilings and applying two coats of whtie wash complete all as specified and as directed.

M&L for complete removal of existing treatment on walls and applying two coat of cement base paint complete all as specified and as directed.

S&F 15 mm bore medium grade galvanised water tubing, with all fitting, fixed complete to walls and ceilings or laid in floors, concealed type including taking down old unserviceable GI tubing complete all as specified and as directed.

S&F 20 mm bore medium grade galvanised water tubing, with all fitting, fixed complete to walls and ceilings or laid in floors, concealed type including taking down old unserviceable GI tubing complete all as specified and as directed.

S&F in repair 15 mm dia bib taps, fancy type cast copper alloy chromium plated screwed down, high pressure, with capstan head, screwed down screwed for iron pipe complete all as specified and as directed. Make :- Cera (Floral series) Cat No. F3002151 or Prayag/Jaquar/Hindware.

S&F in repair 15 mm bore pillar taps, fancy type cast copper alloy chromium plated, with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed etc complete all as specified and as directed. Make :- Cera (Floral series) Cat No. F3002101 or Prayag/Jaquar/Hindware.

S&F in repair 15 mm dia stop valves fancy type, cast copper alloy chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc. complete all as specified and as directed. Make :- Cera (Floral series) Cat No. F3002361 or Prayag/Jaquar/Hindware.

S&F in repairs chromium plated shower roses of size 150 mm dia (minimum weight 195 grms) with or without swivel joints, any size, including fixing to steel pipe or union and shower arm complete all as specified and as directed.

S&F brass CP wall mixer (3-in-1) with spout and provision for both overhead shower and hand shower with 210mm (8.5'')long bend pip , complete all as specified and as directed. Make :- Cera (Floral series) Cat No. F2007403 or Prayag/Jaquar/Hindware.

S&F 15 mm bore two way bib cock, brass CP quarter turn with wall flange and aerator, complete all as specified and as directed. Make :- Cera (Floral series) Cat No. F1003161 or Prayag/Jaquar/Hindware.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specifed and as directed.

S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet complete all as specifed and as directed.

S&F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed.

S&F in repair PVC connection 16mm outer dia, 450mm long for cold water with brass union on both sides to suit 15mm dia GI pipe complete all as specified and as directed.

S&F in repair 15mm size SS health faucet, ABS body, with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed.

S&F in repair vitreous china white wash hand basin flat back size 550x400mm including brackets chain & plug and with waste pipe waste coupling etc complete all as specified and as directed.

S&F in repair stainless steel sink with draining board made out of 1.0 mm thick sheet fixed in kitchen or laboratory with plugs, washers and waste pipes; including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.

S&F in repair 32mm bore PVC Waste pipe for WHB complete all as specified and as direced.

S&F in repair brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges complete all as specified and as direced.

S&F in repair PVC connection 16mm outer dia, 600mm long for cold/hot water with brass union on both sides to suit 15mm dia GI pipe complete all as specified and as directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Dismantling of AC pipes of size 100 mm dia, jointed in cement mortar complete all as spcified and as directed.

Dismantling of AC pipes of size 75 mm dia, jointed in cement mortar complete all as spcified and as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends with access door complete all as specified and as directed.

S&F PVC (SWR) junctions Single T (equal or unequal) any radius 75 mm dia with access door complete all as specified and as directed.

S & F PVC (SWR) junctions Single T (equal or unequal) any radius 110 mm dia with access door complete all as specified and as directed.

Cutting holes into or through brick walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 Sqcm but n.exc 400 Sqcm complete all as specified and as directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed

S&F in repair 500 ltr capacity rotational moulded poly-ethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including taking down the existing unserviceable one complete all as specified and directed.

S&F in repair 20 mm bore float valve synthetic (PVC) high pressure with polythene ball of size 6" dia and flynut complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring with concealed type with PVC insulated, unsheathed, single core multistranded copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through 20mm dia PVC conduit ISI marked with its acessories and sunken box and frame cover plate for mounting as required at site for switches/sockets/regulators etc for one light /CB/fan point controlled by one switch complete all as specified and as directed. (Note :- MS Sunken boxes, cover plates with frame switches, sockets shall be measured and paid seperately under relevent items of this Schedule. Fixing of sunken box and cover with frame is included in quoted rate.)

S&F switch piano flush type single pole one way 5 Amps complete all as specified and as directed.

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals complete all as specified and as directed.

S&F ceiling fan with electronic type regulator and accessories 230 V, 1200mm sweep, BEE 5 star rated, ISI standards pre-wired and including connecting up with twin core twisted flexible copper conductor cable with connector including dismatling old one and depositing to AGE E/M Store yard complete all as specified and directed. Make :- Bajaj Cat part No. 250763 Electra 50 or equivalent in Crompton/Havells.

S&F exhaust fan metal body of size 225 mm sweep ,single phase, 230 V including electrical connection including dismatling old one and depositing to AGE E/M Store yard complete all as specified and directed. Make :- Bajaj Cat Part No. 70002 or equivalent in Crompton/Havells.

Material and labour for sub main wiring with two runs of single core, PVC insulated unsheathe multi-stranded copper conductor cable of size 10 Sqmm, 1100 volts grade (FRLS) and one run of 10 Sqmm PVC insulated multi-stranded copper conductor cable (FRLS) for earth continuity conductor drawn through and including ISI marked rigid PVC casing caping with all necessary accessories including taking down old unserviceable wiring complete all as specified and directed. (Note :- Two runs of 10 Sqmm cable, one run of 10 Sqmm earth continuity conductor and one run of PVC casing caping with all necessary accessories will be measured as one length).

Material and labour for sub main wiring with two runs of single core, PVC insulated unsheathe multi-stranded copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi-stranded copper conductor cable (FRLS) for earth continuity conductor drawn through and including ISI marked rigid PVC casing caping with all necessary accessories including taking down old unserviceable wiring complete all as specified and directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm earth continuity conductor and one run of PVC casing caping with all necessary accessories will be measured as one length).

Supply and fix sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral, 12 way, 240 Volts, single door with 200 Amps rated bus bar including taking down old unserviceable one complete all as specified and directed. Make: Indoasian Cat No: 811803 or equivalent in Havells/Legrand/Standard.

S&F MCB DP 32Amps including taking down old unserviceable MCB complete all as specified and directed. Make: Indoasian Cat No: 811173/ Legrand Cat No 4086 36 or equivalent make in ABB/L&T/Schneider.

S &F MCB SPN 6 -32 Amps, 240 Volts 50 Hz, 10 KA rating "C' Curve including taking down old unserviceable MCB complete all as specified and directed. Make: Indoasian Cat No: 811144 to 811151/ Legrand Cat No 408609 to 408617/ Schneider Cat No A9N2P06C to A9N2P32C or equivalent make in ABB/L&T.

S&F LED batten 18 watt, 4 feet long suitable for indoor applications with integrated electronic driver of operating voltage 110 to 270 Volts , constructed of fire retardant engineering grade extruded plastic and decorative end caps including taking down existing unserviceable light fittings complete all as specified and as diretcted. Make: Crompton Cat No LCTL-18-CDL or equivalent in Wipro/Bajaj.

S&F LED batten 9 watt, 2 feet long suitable for indoor applications with integrated electronic driver of operating voltage 110 to 270 Volts , constructed of fire retardant engineering grade extruded plastic and decorative end caps including taking down existing unserviceable light fittings complete all as specified and as diretcted. Make: Crompton Cat No LCTL-9-CDL or equivalent in Wipro/Bajaj.

S&F LED batten 7 watt, mirror light fittings with integrated electronic driver of operating voltage 110 to 270 volts including connecting up and taking down existing unserviceable surface/ceiling mounted light fittings complete all as specified and as diretcted. Make:- Crompton Cat No LCL-7-CDL or equivalent in Wipro/Havells/Philips

S&F LED Bulk head 10 Watt with PDC aluminium housing and milky diffuser including taking down old unserviceable one complete all as specified and as directed. Make:- Bajaj Cat No. BIBWP10WLED/ C&S Cat No LTB10WLED/ Crompton Cat Part No. LBH-10-CDL

S&F fancy light fittings including LED filament lamp complete all as specified and as directed. Make : Havells LHFOAJC1TZ1C040 or equivalent in Philips/Jaquar

M&L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished iron earth wire 4mm by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 (with 20mm graded stone aggregate),chamber and 50mm thick precast RCC (1:2:4) cover slab re-inforced with XPM Jalli including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No.3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed.

Elite Constructions

Varsha Enterprises