REPAIRS, PAINTING AND POLISHING TO CERTAIN FURNITURES AT LIKABALI MIL STN AND ALONG, NLP AND RAYANG MIL STNS UNDER GE 872 EWS

Amount

REPAIRS TO FURNITURE AT LIKABALI

S&F Mild Steel Lock with Duplicate Key of size 40mm, 6 Lever (as approved) for Almirah Large Steel (Drawing No. FD-1031)/Almirah Medium Steel (Drawing No. FD-1032) including Taking out/down unserviceable Lock, complete all as shown in Drawing/specified and as directed.

S&F Mild Steel Handle, Chromium plated (as approved) for Almirah Large Steel (Drawing No. FD-1031)/ Almirah Medium Steel Drawing No. FD-1032), including Taking out/down unserviceable Handle, complete all as shown in Drawing/specified and as directed.

M&L Corner Cleat made out from Mild Steel Sheet 3.0mm thick for Shelves of Almirah Large Steel (Drawing No. FD-1031)/ Almirah Medium Steel Drawing No. FD-1032), and applying Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer to match the Existing Surface including Taking out/down unserviceable Cleat, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Long Rail for Bed Hard Ply Top (Drawing No. FD-246, FD-247) made to Shape/Size and Polishing to match with Existing Surfaces including Taking out/down unserviceable Long Rail without disturbing Bed Hard Ply Top, complete all as shown in Drawing/ specified and as directed.

S&F Plywood Top 12mm thick, 7 Ply of size 1980x910mm, BWR Grade, Type BB, confirming to IS:303, Commercial facing on Both Sides for Bed Hard Ply Top (Drawing No. FD-246, FD-247) including Taking out/down unserviceable Plywood Top, complete all as shown in Drawing/specified and as directed.

M&L Long Rail made out from GI Pipe 32mm bore (dia), medium grade having 1.98 Metre long for Charpoy GI Pipe (Drawing No. FD-220), threading Both Ends upto 25mm and free for Elbow including Taking out/down unserviceable Long Rail, complete all as shown in Drawing/specified and as directed.

M&L Short Rail made out from GI Pipe 32mm bore (dia) (Cutting Serviceable Portion obtained from Long Rail), having 820mm long for Charpoy GI Pipe (Drawing No. FD-220), threading Both Ends upto 25mm and free for Elbow including Taking out/down unserviceable Short Rail, complete all as shown in Drawing/specified and as directed.

M&L Leg made out from GI Pipe 32mm bore (dia) (Cutting Serviceable Portion obtained from Short Rail), having 820mm long for Charpoy GI Pipe (Drawing No. FD-220), threading One End upto 25mm free for Elbow and the Other End Welded with and including Mild Steel Plate 3.0mm thick in Round Shape to GI Pipe 32mm bore (dia) Leg including Taking out/down unserviceable Leg, complete all as shown in Drawing/specified and as directed.

S&F GI Check Nut suitable for GI Pipe 32mm bore (dia) for Charpoy GI Pipe (Drawing No. FD-220) including Taking out/down unserviceable Check Nut, complete all as shown in Drawing/specified and as directed.

S&F Elbow 3-Way, Class AA or conforming to IS, suitable for GI Pipe 32mm bore (dia) for Charpoy GI Pipe (Drawing No. FD-220) including Taking out/down unserviceable Elbow, complete all as shown in Drawing/ specified and as directed.

M&L Mild Steel Square Pipe 25x25x2.0mm thick, 900mm in length, Welded to GI Pipe to support Plywood of Charpoy GI Pipe (Drawing No. FD-220), complete all as shown in Drawing/ specified and as directed.

M&L Plywood Top 12mm thick BWR Grade, 7 Ply of size 1980x910mm and fixing with 6 No. Mild Steel Bolt, Nuts and Washer for Charpoy GI Pipe (Drawing No. FD-220) including Removing worn out Nylone Newar from Charpoy GI Pipe, complete all as shown in Drawing/ specified and as directed.

M&L Arm Rest (as approved) for Chair CBA Office Steel (Drawing No. FD-75(M) including Taking out/down carefully unserviceable Arm Rest from Chair CBA Office Steel, complete all as shown in Drawing/specified and as directed.

M&L Seat Frame (as approved) for Chair CBA Office Steel (Drawing No. FD-75(M) including Taking out/down carefully unserviceable Seat Frame from Chair CBA Office Steel, complete all as shown in Drawing/specified and as directed.

M&L Back Frame (as approved) for Chair CB Office Steel (Drawing No. FD-75(M) including Taking out/down carefully unserviceable Back Frame from Chair CB Office Steel, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Leg for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Leg from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Leg for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Leg from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Rail for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Rail from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Rail for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Rail from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Stiffner for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Stiffner from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Canning with Best quality, Half Round, White Plastic Cane 2.5mm Wide and 3.0mm Wide at Border to Chair Dining (Drawing No. FD-279) including Removing worn out Canning from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Leg for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Leg from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Leg for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Leg from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Rail for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Rail from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Rail for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Rail from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Handle for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Handle from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Canning with Best quality, Half Round, White Plastic Cane 2.5mm Wide and 3.0mm Wide at Border to Chair Easy (Drawing No. FD-229) including Removing worn out Canning from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Leg for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Leg from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Leg for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Leg from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Rail for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Rail from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Rail for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Rail from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Side from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Stiffner for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Stiffner from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Handle for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Handle from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Canning with Best quality, Half Round, White Plastic Cane 2.5mm Wide and 3.0mm Wide at Border to Chair Writing (Drawing No. FD-280) including Removing worn out Canning from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Leg for Table Dining 6 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Leg from Table Dining 6 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail Short for Table Dining 6 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail Short from Table Dining 6 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail Long for Table Dining 6 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail Long from Table Dining 6 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Corner Cleat to Support Corner Portion of Table Dining 6 Pers (Drawing No. FD-273) for fixing Side Rail, made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Corner Cleat from Table Dining 6 Pers, complete all as shown in Drawing/ specified and as directed.

M&L Plywood Top 19mm thick, 11 Ply, BWR Grade, Type AA, confirming to IS:303-1989, pasted Decorative Laminate Sheet (HPL) 1.5mm thick on Top of Plywood Top (Exposed Face) and the Other Side White Balancing including providing 6.0mm thick Teak Wood Beading on All Edges of Table Dining 6 Pers (Drawing No. FD-273) including Taking out/down carefully unserviceable Particle Board Top from Table Dining 6 Pers, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Leg for Table Dining 8 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Leg from Table Dining 8 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Long Rail for Table Dining 8 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Long Rail from Table Dining 8 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Short Rail for Table Dining 8 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Short Rail from Table Dining 8 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Corner Cleat to Support Corner Portion of Table Dining 8 Pers (Drawing No. FD-273) for fixing Side Rail, made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Corner Cleat from Table Dining 8 Pers, complete all as shown in Drawing/ specified and as directed.

M&L Plywood Top 19mm thick, 11 Ply, BWR Grade, Type AA, confirming to IS:303-1989, pasted Decorative Laminate Sheet (HPL) 1.5mm thick on Top of Plywood Top (Exposed Face) and the Other Side White Balancing including providing 6.0mm thick Teak Wood Beading on All Edges of Table Dining 8 Pers (Drawing No. FD-273) including Taking out/down carefully unserviceable Particle Board Top from Table Dining 8 Pers, complete all as shown in Drawing/ specified and as directed.

S&F Mild Steel Lock with Duplicate Key of size 40mm, 6 Lever (as approved) for Table Office Officer Steel (Drawing No. FD-1003) including Taking out/ down unserviceable Lock, complete all as shown in Drawing/specified and as directed.

S&F Mild Steel Lock with Duplicate Key of size 40mm, 6 Lever (as approved) for Table Office Clerk Steel (Drawing No. FD-1004) including Taking out/ down unserviceable Lock, complete all as shown in Drawing/specified and as directed.

M&L Plywood Top 19mm thick, 11 Ply, BWR Grade, Type AA, confirming to IS:303-1989, pasted Decorative Laminate Sheet (HPL) 1.5mm thick on Top of Plywood Top (Exposed Face) and the Other Side White Balancing including providing 6.0mm thick Teak Wood Beading on All Edges of Table Office Clerk Steel (Drawing No. FD-1004) including Taking out/down carefully unserviceable Particle Board Top from Table Office Clerk Steel, complete all as shown in Drawing/ specified and as directed.

M&L Plywood Top 19mm thick, 11 Ply, BWR Grade, Type AA, confirming to IS:303-1989, pasted Decorative Laminate Sheet (HPL) 1.5mm thick on Top of Plywood Top (Exposed Face) and the Other Side White Balancing including providing 6.0mm thick Teak Wood Beading on All Edges of Table Writing Medium (Drawing No. DB-3782) including Taking out/down carefully unserviceable Particle Board Top from Table Writing Medium, complete all as shown in Drawing/ specified and as directed.

M&L Plywood Top 19mm thick, 11 Ply, BWR Grade, Type AA, confirming to IS:303-1989, pasted Decorative Laminate Sheet (HPL) 1.5mm thick on Top of Plywood Top (Exposed Face) and the Other Side White Balancing including providing 6.0mm thick Teak Wood Beading on All Edges of Table Centre 2-Tier (Drawing No. FD-393) including Taking out/down carefully unserviceable Particle Board Top from Table Centre 2-Tier, complete all as shown in Drawing/ specified and as directed.

M&L Plywood Top 19mm thick, 11 Ply, BWR Grade, Type AA, confirming to IS:303-1989, pasted Decorative Laminate Sheet (HPL) 1.5mm thick on Top of Plywood Top (Exposed Face) and the Other Side White Balancing including providing 6.0mm thick Teak Wood Beading on All Edges of Peg Table Teak Wood (Drawing No. FD-236, FD-277) including Taking out/down carefully unserviceable Particle Board Top from Table Centre 2-Tier, complete all as shown in Drawing/ specified and as directed.

M&L Plywood Top 19mm thick, 11 Ply, BWR Grade, Type AA, confirming to IS:303-1989, pasted Decorative Laminate Sheet (HPL) 1.5mm thick on Top of Plywood Top (Exposed Face) and the Other Side White Balancing including providing 6.0mm thick Teak Wood Beading on All Edges of Teapoy (Drawing No. FD-278) including Taking out/down carefully unserviceable Particle Board Top from Teapoy, complete all as shown in Drawing/ specified and as directed.

M&L Removing Denting and Making Good Bends (if any), Re-fixing of Loose Shelves with Mild Steel Stay Hook (as required), Preparing Old Painted/ Treated both Internal & External Surfaces of Almirah Large Steel (Drawing No. FD-1031) by Removing Loose Paints and Providing Putty and Primer where required to obtain a Smooth Surface, applying a Coat of Synthetic Enamel Paint (Smoke Grey or Olive Green Colour as ordered) with Spray Painting Machine, complete all as specified and as directed.

M&L Removing Denting and Making Good Bends (if any), Re-fixing of Loose Shelves with Mild Steel Stay Hook (as required), preparing Old Painted/ Treated both Internal & External Surfaces of Almirah Medium Steel (Drawing No. FD-1032) by Removing Loose Paints and Providing Putty and Primer where required to obtain a Smooth Surface, applying a Coat of Synthetic Enamel Paint (Smoke Grey or Olive Green Colour as ordered) with Spray Painting Machine, complete all as specified and as directed.

M&L Removing Denting and Making Good Bends (if any), Re-fixing of Loose Shelves with Mild Steel Stay Hook (as required), preparing Old Painted/ Treated both Internal & External Surfaces of Locker Bed Side Steel (Drawing No. FD-1029) by Removing Loose Paints and Providing Putty and Primer where required to obtain a Smooth Surface, applying a Coat of Synthetic Enamel Paint (Smoke Grey or Olive Green Colour as ordered) with Spray Painting Machine, complete all as specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Bar Counter, complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Bar Show Case 7'-3"x3'-0''x13'-6", complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Bed Ply Top with MNF Set (Drawing No. FD-246, FD-247), complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Chair Dining (Drawing No. FD-279), complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Chair Dining Special, complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Chair Easy (Drawing No. FD-229), complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Chair Writing (Drawing No. FD-280), complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Conference Table of size 6'x2½', complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Peg Table Teak Wood (Drawing No. FD-236, FD-277), complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Peg Table Teak Wood with Teak Top 15"x15", complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Peg Table Teak Wood with Teak Top 18"x13", complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Peg Table Teak Wood with Glass Top 15"x15", complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Peg Table Teak Wood with Glass Top 18"x13", complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Side Table Special, complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Sofa Set 4 Seater Spl, complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Sofa Set 5 Seater Spl, complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Table Centre 2-Tier (Drawing No. FD-393), complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Table Dining 4 Seater with Cushion Seat with 8 Chairs, complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Table Dining 6 Pers (Drawing No. FD-273), complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Table Dining 8 Seater Teak Wood with 16 Chairs, complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Table Writing Medium (Drawing No. DB-3782), complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Teapoy (Drawing No. FD-278), complete all as shown in Drawing/ specified and as directed.

REPAIRS TO FURNITURE AT ALONG, NLP & RAYANG

S&F Mild Steel Lock with Duplicate Key of size 40mm, 6 Lever (as approved) for Almirah Large Steel (Drawing No. FD-1031)/Almirah Medium Steel (Drawing No. FD-1032) including Taking out/down unserviceable Lock, complete all as shown in Drawing/specified and as directed.

S&F Mild Steel Handle, Chromium plated (as approved) for Almirah Large Steel (Drawing No. FD-1031)/ Almirah Medium Steel Drawing No. FD-1032), including Taking out/down unserviceable Handle, complete all as shown in Drawing/specified and as directed.

M&L Corner Cleat made out from Mild Steel Sheet 3.0mm thick for Shelves of Almirah Large Steel (Drawing No. FD-1031)/ Almirah Medium Steel Drawing No. FD-1032), and applying Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer to match the Existing Surface including Taking out/down unserviceable Cleat, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Long Rail for Bed Hard Ply Top (Drawing No. FD-246, FD-247) made to Shape/Size and Polishing to match with Existing Surfaces including Taking out/down unserviceable Long Rail without disturbing Bed Hard Ply Top, complete all as shown in Drawing/ specified and as directed.

S&F Plywood Top 12mm thick, 7 Ply of size 1980x910mm, BWR Grade, Type BB, confirming to IS:303, Commercial facing on Both Sides for Bed Hard Ply Top (Drawing No. FD-246, FD-247) including Taking out/down unserviceable Plywood Top, complete all as shown in Drawing/specified and as directed.

S&F Plywood Top 12mm thick, 7 Ply of size 1980x910mm, BWR Grade, Type BB, confirming to IS:303, Commercial facing on Both Sides for Charpoy IP Hard Top (Drawing No. FD-MAP-II/01) including Taking out/down unserviceable Plywood Top, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Leg for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Leg from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Leg for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Leg from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Rail for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Rail from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Rail for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Rail from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Stiffner for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Stiffner from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Canning with Best quality, Half Round, White Plastic Cane 2.5mm Wide and 3.0mm Wide at Border to Chair Dining (Drawing No. FD-279) including Removing worn out Canning from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Leg for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Leg from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Leg for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Leg from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Rail for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Rail from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Rail for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Rail from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Handle for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Handle from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Canning with Best quality, Half Round, White Plastic Cane 2.5mm Wide and 3.0mm Wide at Border to Chair Easy (Drawing No. FD-229) including Removing worn out Canning from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Leg for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Leg from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Leg for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Leg from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Rail for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Rail from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Rail for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Rail from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Side from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Stiffner for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Stiffner from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Handle for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Handle from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Canning with Best quality, Half Round, White Plastic Cane 2.5mm Wide and 3.0mm Wide at Border to Chair Writing (Drawing No. FD-280) including Removing worn out Canning from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Leg for Table Dining 6 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Leg from Table Dining 6 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail Short for Table Dining 6 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail Short from Table Dining 6 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail Long for Table Dining 6 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail Long from Table Dining 6 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Corner Cleat to Support Corner Portion of Table Dining 6 Pers (Drawing No. FD-273) for fixing Side Rail, made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Corner Cleat from Table Dining 6 Pers, complete all as shown in Drawing/ specified and as directed.

M&L Plywood Top 19mm thick, 11 Ply, BWR Grade, Type AA, confirming to IS:303-1989, pasted Decorative Laminate Sheet (HPL) 1.5mm thick on Top of Plywood Top (Exposed Face) and the Other Side White Balancing including providing 6.0mm thick Teak Wood Beading on All Edges of Table Dining 6 Pers (Drawing No. FD-273) including Taking out/down carefully unserviceable Particle Board Top from Table Dining 6 Pers, complete all as shown in Drawing/ specified and as directed.

M&L Removing Denting and Making Good Bends (if any), Re-fixing of Loose Shelves with Mild Steel Stay Hook (as required), Preparing Old Painted/ Treated both Internal & External Surfaces of Almirah Large Steel (Drawing No. FD-1031) by Removing Loose Paints and Providing Putty and Primer where required to obtain a Smooth Surface, applying a Coat of Synthetic Enamel Paint (Smoke Grey or Olive Green Colour as ordered) with Spray Painting Machine, complete all as specified and as directed.

M&L Removing Denting and Making Good Bends (if any), Re-fixing of Loose Shelves with Mild Steel Stay Hook (as required), preparing Old Painted/ Treated both Internal & External Surfaces of Almirah Medium Steel (Drawing No. FD-1032) by Removing Loose Paints and Providing Putty and Primer where required to obtain a Smooth Surface, applying a Coat of Synthetic Enamel Paint (Smoke Grey or Olive Green Colour as ordered) with Spray Painting Machine, complete all as specified and as directed.

M&L Removing Denting and Making Good Bends (if any), Re-fixing of Loose Shelves with Mild Steel Stay Hook (as required), preparing Old Painted/ Treated both Internal & External Surfaces of Locker Bed Side Steel (Drawing No. FD-1029) by Removing Loose Paints and Providing Putty and Primer where required to obtain a Smooth Surface, applying a Coat of Synthetic Enamel Paint (Smoke Grey or Olive Green Colour as ordered) with Spray Painting Machine, complete all as specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Chair Dining (Drawing No. FD-279), complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Chair Easy (Drawing No. FD-229), complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Chair Writing (Drawing No. FD-280), complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Sofa Set 5 Seater (Drawing No. FD-373), complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Table Dining 6 Pers (Drawing No. FD-273), complete all as shown in Drawing/ specified and as directed.

M/S R G Construction