Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.2 CrAccepted-AOC 274 A 5TH LANE NISHATGANJ LUCKNOW UP PIN 226007 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226007 | ₹1.2 Cr | 1 | Accepted-AOC Acceptance of tender |
| 2 | 2₹1.3 Cr+₹1.6 L (1.26%)Rejected-Finance 307 SADAR BAZAR LUCKNOW UP 226002 | LUCKNOW | UTTAR PRADESH | 226002 | ₹1.3 Cr+₹1.6 L (1.26%) | 2 | Rejected-Finance Not L1 |
| 3 | 3₹2.2 Cr+₹92.6 L (74.3%)Rejected-Finance | ₹2.2 Cr+₹92.6 L (74.3%) | 3 | Rejected-Finance Not L1 |
| 4 | Rejected-Technical HIG 05 SECTOR G LDA COLONY KANPUR ROAD LUCKNOW 226012 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226012 | - | - | Rejected-Technical Rejected for opening of cover 2 due to two class below the eligible class. |
| Sl No | Description | Qty | Unit | SHREE Glass and Plywood L3 | M/s Vatsh Raj and co L2 | M/S S.B. Singh and Sons L1 |
|---|---|---|---|---|---|---|
| 1.00 | Supply fixing testing and commissioning of MAIN LT panel board CPRI approved OF size –750x2275x1200mm in door type factory made, floor mountade type fabricated of 2mm thick CRCA sheet and inner sheet of MS sheet 1.6 mm thick, 3 mm thick for gland plate i/c cleaning & finishing complete with 7 tank process for powder coated panting with welded/bolted 3b construction, having 1600 amp capacity extensible type tpn aluminium alloy busbar for high conductivity, dmc/smc busbar support, including connection all exisiting cable with ACB & MCCB terminal all as specified and directed by EIC at the site requirment complete including the following component:-
(1) INCOMER TRF-1 ( 750kVA ):-
i)ACB FP EDO 50kA MP BASED WITH LSIG PROTECTION
CC, MOTOR, SHUNT-220V AC ,1600A
ii)BREAKER CONTROL SWITCH ( SPRING RETURN TYPE ) 25A, 1 no
iii)SELECTOR SWITCH A/M 2P 2W , 6A, 1 No
iv) AUX. CONTACTOR 2NO+2NC, 230V AC, of suitable capacity 1 No
v) DIGITAL MFM CL-1 WITH RS485 COMM. PORT, 230V AC, 1 No
vi) DIGITAL VOLTMETER CL-1 (0-500V), 1 No
vii) DIGITAL AMMETER CL-1 (0-1500A), 1 No
viiii) CT CL-1 15VA RESIN CAST ( FOR METERING ), 1600/5A- 3 nos.
ix) LED INDICATION LAMP RED, YELLOW, ON, OFF, TRIP, 220V AC, 1 Set ( 5 Nos)
x) LED INDICATION LAMP BLUE , 220V AC, 1 No
xi) MCB SP 10kA C-CURVE, 6A, 6 No
xii) UNDER VOLTAGE & OVER VOLTAGE RELAY, 1 No
xiii) ANNUNCIATOR, 1 Nos
xiv) HOOTER, 1 No
xv) Emg-STOP, PUSH BUTTON, 1 No | 1 | Each Job | 5,86,819 ₹5,86,819 | 3,58,000 ₹3,58,000 | 3,50,000 ₹3,50,000 Lowest |
| 2.00 | Supply fixing testing and commissioning of MAIN LT panel board CPRI approved OF size –750x2275x1200mm in door type factory made, floor mountade type fabricated of 2mm thick CRCA sheet and inner sheet of MS sheet 1.6 mm thick, 3 mm thick for gland plate i/c cleaning & finishing complete with 7 tank process for powder coated panting with welded/bolted 3b construction, having 1600 amp capacity extensible type tpn aluminium alloy busbar for high conductivity, dmc/smc busbar support, including connection all exisiting cable with ACB & MCCB terminal all as specified and directed by EIC at the site requirment complete including the following component:-
(1) INCOMER TRF-2 ( 500kVA ):-
i)ACB FP EDO 50kA MP BASED WITH LSIG PROTECTION
CC, MOTOR, SHUNT-220V AC ,1000A
ii)BREAKER CONTROL SWITCH ( SPRING RETURN TYPE ) 25A, 1No
iii)SELECTOR SWITCH A/M 2P 2W , 6A, 1No
iv) AUX. CONTACTOR 2NO+2NC, 230V AC, of suitable capacity 1No
v) DIGITAL MFM CL-1 WITH RS485 COMM. PORT, 230V AC, 1No
vi) DIGITAL VOLTMETER CL-1(0-500V), 1No
vii) DIGITAL AMMETER CL-1,(0-1500A) 1No
viiii) CT CL-1 15VA RESIN CAST ( FOR METERING ), 1000/5A- 3nos.
ix) LED INDICATION LAMP RED, YELLOW, ON, OFF, TRIP, 220V AC, 1 SET (5 Nos)
x) LED INDICATION LAMP BLUE , 220V AC, 1No
xi) MCB SP 10kA C-CURVE, 6A, 6 No
xii) UNDER VOLTAGE & OVER VOLTAGE RELAY, 1No
xiii) ANNUNCIATOR, 1No
ivx) HOOTER, 1No
vx) Emg-STOP, PUSH BUTTON, 1No | 1 | Each Job | 5,33,471 ₹5,33,471 | 3,65,000 ₹3,65,000 | 3,55,000 ₹3,55,000 Lowest |
| 3.00 | Supply fixing testing and commissioning of MAIN LT panel board suitable size CPRI approved OF size –750x2275x1200mm in door type factory made, floor mountade type fabricated of 2mm thick CRCA sheet and inner sheet of MS sheet 1.6 mm thick, 3 mm thick for gland plate i/c cleaning & finishing complete with 7 tank process for powder coated panting with welded/bolted 3b construction, having 1600 amp capacity extensible type tpn aluminium alloy busbar for high conductivity, dmc/smc busbar support, including connection all exisiting cable with ACB & MCCB terminal all as specified and directed by EIC at the site requirment complete including the following component:-
(1) INCOMER DG-1 ( 625kVA ):-
i)ACB FP EDO 50kA MP BASED WITH LSIG PROTECTION
CC, MOTOR, SHUNT-220V AC ,1250A
ii)BREAKER CONTROL SWITCH ( SPRING RETURN TYPE ) 25A, 1No
iii)SELECTOR SWITCH A/M 2P 2W , 6A, 1No
iv) AUX. CONTACTOR 2NO+2NC, 230V AC, of suitable capacity 1No
v) DIGITAL MFM CL-1 WITH RS485 COMM. PORT, 230V AC, 1Nos
vi) DIGITAL VOLTMETER CL-1, (0-500V) 1No
vii) DIGITAL AMMETER CL-1,(0-1500A) 1No
viiii) CT CL-1 15VA RESIN CAST ( FOR METERING ), 1250/5A- 3 nos.
ix) LED INDICATION LAMP RED, YELLOW, ON, OFF, TRIP, 220V AC, 1 Set (5 Nos)
x) LED INDICATION LAMP BLUE , 220V AC, 1No
xi) MCB SP 10kA C-CURVE, 6A, 6Nos
xii) REVERSE POWER RELAY WITH PROTECTION CT, 1No
xiii) ANNUNCIATOR, 1No
ivx) HOOTER, 1No
vx) Emg-STOP, PUSH BUTTON, 1No | 1 | Each Job | 5,41,267 ₹5,41,267 | 3,60,000 ₹3,60,000 | 3,55,000 ₹3,55,000 Lowest |
| 4.00 | Supply fixing testing and commissioning of MAIN LT panel board suitable size CPRI approved OF size –750x2275x1200mm in door type factory made, floor mountade type fabricated of 2mm thick CRCA sheet and inner sheet of MS sheet 1.6 mm thick, 3 mm thick for gland plate i/c cleaning & finishing complete with 7 tank process for powder coated panting with welded/bolted 3b construction, having 1200 amp capacity extensible type tpn aluminium alloy busbar for high conductivity, dmc/smc busbar support, including connection all exisiting cable with ACB & MCCB terminal all as specified and directed by EIC at the site requirment complete including the following component:-
(1) INCOMER DG-1, 2, 3 ( 1X200kVA & 2X160kVA ):- 3NOs
i)ACB FP EDO 50kA MP BASED WITH LSIG PROTECTION
CC, MOTOR, SHUNT-220V AC ,800A, 1No
ii)BREAKER CONTROL SWITCH ( SPRING RETURN TYPE ) 25A, 1No
iii)SELECTOR SWITCH A/M 2P 2W , 6A, 1No
iv) AUX. CONTACTOR 2NO+2NC, 230V AC, of suitable capacity 1No
v) DIGITAL MFM CL-1 WITH RS485 COMM. PORT, 230V AC, 1No
vi) DIGITAL VOLTMETER CL-1, 1No
vii) DIGITAL AMMETER CL-1, 1No
viiii) CT CL-1 15VA RESIN CAST ( FOR METERING ), 800/5A- 3Nos
ix) LED INDICATION LAMP RED, YELLOW, ON, OFF, TRIP, 220V AC, 5Nos
x) LED INDICATION LAMP BLUE , 220V AC, 1No
xi) MCB SP 10kA C-CURVE, 6A, 5Nos
xii) REVERSE POWER RELAY WITH PROTECTION CT, 1No
xiii) ANNUNCIATOR , 1No
ivx) HOOTER, 1Nos
vx) Emg-STOP, PUSH BUTTON, 1No | 3 | Each Job | 15,79,421 ₹47,38,263 | 3,60,000 ₹10,80,000 | 3,55,000 ₹10,65,000 Lowest |
| 5.00 | Supply fixing testing and commissioning of MAIN LT panel board suitable size CPRI approved OF size –900x2275x1200mm in door type factory made, floor mountade type fabricated of 2mm thick CRCA sheet and inner sheet of MS sheet 1.6 mm thick, 3 mm thick for gland plate i/c cleaning & finishing complete with 7 tank process for powder coated panting with welded/bolted 3b construction, having 1600 amp capacity extensible type tpn aluminium alloy busbar for high conductivity, dmc/smc busbar support, including connection all exisiting cable with ACB & MCCB terminal all as specified and directed by EIC at the site requirment complete including the following component:-
(1) BUSCOUPLER-1:-
i)ACB FP EDO 50kA MP BASED WITH LSIG PROTECTION, 1 no
CC, MOTOR, SHUNT-220V AC ,1600A, 1 no
ii)BREAKER CONTROL SWITCH ( SPRING RETURN TYPE ) 25A, 1 no
iii)SELECTOR SWITCH A/M 2P 2W , 6A, 1 no
iv) AUX. CONTACTOR 2NO+2NC, 230V AC, of suitable capacity, 1 No
ix) LED INDICATION LAMP ON, OFF, TRIP, 220V AC, 1 no
xi) MCB SP 10kA C-CURVE, 6A, 1 no
vx) Emg-STOP, PUSH BUTTON, 1 no | 1 | Each Job | 5,19,866 ₹5,19,866 | 3,65,000 ₹3,65,000 | 3,55,000 ₹3,55,000 Lowest |
| 6.00 | Supply fixing testing and commissioning of MAIN LT panel board suitable size CPRI approved OF size –900x2275x1200mm in door type factory made, floor mountade type fabricated of 2mm thick CRCA sheet and inner sheet of MS sheet 1.6 mm thick, 3 mm thick for gland plate i/c cleaning & finishing complete with 7 tank process for powder coated panting with welded/bolted 3b construction, having 1200 amp capacity extensible type tpn aluminium alloy busbar for high conductivity, dmc/smc busbar support, including connection all exisiting cable with ACB & MCCB terminal all as specified and directed by EIC at the site requirment complete including the following component:-
(1) BUSCOUPLER-2:-
i)ACB FP EDO 50kA MP BASED WITH LSIG PROTECTION
CC, MOTOR, SHUNT-220V AC ,1000A , 1 no
ii)BREAKER CONTROL SWITCH ( SPRING RETURN TYPE ) 25A, 1 no
iii)SELECTOR SWITCH A/M 2P 2W , 6A, 1 no
iv) AUX. CONTACTOR 2NO+2NC, 230V AC, of suitable capacity 1 no
ix) LED INDICATION LAMP ON, OFF, TRIP, 220V AC, 1 no
xi) MCB SP 10kA C-CURVE, 6A, 1 no
vx) Emg-STOP, PUSH BUTTON, 1 no
(2 ) MCCB:- (i) MCCB FP,250A, 25kA TM BASED WITH O/L, S/C PROTECTION with Spreader , Rotary handel WITH AMMETER | 1 | Each Job | 4,66,520 ₹4,66,520 | 3,65,000 ₹3,65,000 | 3,55,000 ₹3,55,000 Lowest |
| 7.00 | Supply fixing testing and commissioning of MAIN LT panel board suitable size CPRI approved OF size –900x2275x1200mm in door type factory made, floor mountade type fabricated of 2mm thick CRCA sheet and inner sheet of MS sheet 1.6 mm thick, 3 mm thick for gland plate i/c cleaning & finishing complete with 7 tank process for powder coated panting with welded/bolted 3b construction, having 1600 amp capacity extensible type tpn aluminium alloy busbar for high conductivity, dmc/smc busbar support, including connection all exisiting cable with ACB & MCCB terminal all as specified and directed by EIC at the site requirment complete including the following component:-
(1) BUSCOUPLER-3:-
i)ACB FP EDO 50kA MP BASED WITH LSIG PROTECTION
CC, MOTOR, SHUNT-220V AC ,800A, 1 no
ii)BREAKER CONTROL SWITCH ( SPRING RETURN TYPE ) 25A, 1 no
iii)SELECTOR SWITCH A/M 2P 2W , 6A, 1 no
iv) AUX. CONTACTOR 2NO+2NC, 230V AC, of suitable capacity ,1 Nos
ix) LED INDICATION LAMP ON, OFF, TRIP, 220V AC, 1 no
xi) MCB SP 10kA C-CURVE, 6A, 1 no
vx) Emg-STOP, PUSH BUTTON, 1 no | 1 | Each Job | 4,59,641 ₹4,59,641 | 3,65,000 ₹3,65,000 | 3,55,000 ₹3,55,000 Lowest |
| 8.00 | Supply fixing testing and commissioning of MAIN LT panel board suitable size CPRI approved OF size –900x500x1200mm in door type factory made, floor mountade type fabricated of 2mm thick CRCA sheet and inner sheet of MS sheet 1.6 mm thick, 3 mm thick for gland plate i/c cleaning & finishing complete with 7 tank process for powder coated panting with welded/bolted 3b construction, having 1600 amp capacity extensible type tpn aluminium alloy busbar for high conductivity, dmc/smc busbar support, including connection all exisiting cable with ACB & MCCB terminal all as specified and directed by EIC at the site requirment complete including the following component:-
PLC SECTION-
When transformer 1 and transformer 2 are on, buscoupler 1 will be off and the remaining buscouplers 2, & 3 will be on And all dg will off.
If any case transformer gets damaged & maintenance then in that case the DG will run and the buscoupler of same dg will OFF.
When all DG are on, buscoupler 1, 2 &3 will be off And all TRF will be off.
AS PER REQUIREMENT OF LOAD A MASTER DG IS ALWAYS ON AND OTHER DG START, STOP AS PER REQUIREMENT OF LOAD CONDICTION
BUSCOUPLER OPERATION ARE ALSO POSIBLE WITH DG SET IN AUTO AND MANUAL BOTH CONDICTION
The provision that we can start and stop DG IN BOTH MANULA MODE AND AUTO MODE. | 1 | Each Job | 12,02,222 ₹12,02,222 | 3,65,000 ₹3,65,000 | 3,55,000 ₹3,55,000 Lowest |
| 9.00 | Supply fixing testing and commissioning of MAIN LT panel board suitable size CPRI approved OF size –900x2275x1200mm in door type factory made, floor mountade type fabricated of 2mm thick CRCA sheet and inner sheet of MS sheet 1.6 mm thick, 3 mm thick for gland plate i/c cleaning & finishing complete with 7 tank process for powder coated panting with welded/bolted 3b construction, having 1250 amp & 1000A capacity extensible type tpn aluminium alloy busbar for high conductivity, dmc/smc busbar support, including connection all exisiting cable with ACB & MCCB terminal all as specified and directed by EIC at the site requirment complete including the following component:-
(1) OUTGOING:- ACB 1250A & 1000A IN DOUBLE TIRE:-
i)ACB FP EDO 50kA MP BASED WITH LSIG PROTECTION- 1 EACH
CC, MOTOR, SHUNT-220V AC ,1250A & 1000A- 1 no
ii)BREAKER CONTROL SWITCH ( SPRING RETURN TYPE ) 25A- 1 EACH
iii)SELECTOR SWITCH A/M 2P 2W , 6A, 1 EACH
vii) DIGITAL AMMETER CL-1, 1 EACH
viiii) CT CL-1 15VA RESIN CAST ( FOR METERING ), 1600/5A- 3Nos in EACH
ix) LED INDICATION LAMP ON, OFF, TRIP, 220V AC, 3 in EACH
xi) MCB SP 10kA C-CURVE, 6A, 3 in EACH | 2 | Each Job | 4,81,652 ₹9,63,304 | 4,82,000 ₹9,64,000 | 4,70,000 ₹9,40,000 Lowest |
| 10.00 | Supply fixing testing and commissioning of MAIN LT panel board suitable size CPRI approved OF size –900x2275x1200mm in door type factory made, floor mountade type fabricated of 2mm thick CRCA sheet and inner sheet of MS sheet 1.6 mm thick, 3 mm thick for gland plate i/c cleaning & finishing complete with 7 tank process for powder coated panting with welded/bolted 3b construction, having 1250 amp & 800A capacity extensible type tpn aluminium alloy busbar for high conductivity, dmc/smc busbar support, including connection all exisiting cable with ACB & MCCB terminal all as specified and directed by EIC at the site requirment complete including the following component:-
(1) OUTGOING:- ACB 1250A & 800A IN DOUBLE TIRE:-
i)ACB FP EDO 50kA MP BASED WITH LSIG PROTECTION
CC, MOTOR, SHUNT-220V AC ,1250A & 800A, 1 in EACH
ii)BREAKER CONTROL SWITCH ( SPRING RETURN TYPE ) 25A, 1 in EACH
iii)SELECTOR SWITCH A/M 2P 2W , 6A, 1 in EACH
vii) DIGITAL AMMETER CL-1, 1 in EACH
viiii) CT CL-1 15VA RESIN CAST ( FOR METERING ), 1600/5A- 3Nos in EACH
ix) LED INDICATION LAMP ON, OFF, TRIP, 220V AC, 3 in EACH
xi) MCB SP 10kA C-CURVE, 6A, 3 in EACH | 2 | Each Job | 4,81,653 ₹9,63,306 | 4,65,000 ₹9,30,000 Lowest | 4,70,000 ₹9,40,000 |
Tender Value
₹1.1 Cr
EMD Value
₹1.9 L
Closing Date
14 Apr 2025, 6:00 pmClosed
CWE LUCKNOW
HQ CWE Lucknow, 229 MG Road, LucknowCantt, Lucknow-226002
REPAIR MAINTENANCE AND IMPROVEMENT OF LT PANEL INCLUDING LT SWITCH GEAR, OVERHEADLINE, POLE BOX AND ALLIED WORKS AT VARIOUS LOCATIONS IN AREA OF AGE E/M (HOSP) UNDER GE E/M LUCKNOW.
2025_MES_699427_1
CWE/LKO/EM/T-162 OF 2024-25
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
LUCKNOW
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE EM LUCKNOW
₹1.9 L
Yes
7 Aug 2025
26 Feb 2025
16 Apr 2025
26 Feb 2025
14 Apr 2025
19 Mar 2025
26 Feb 2025 - 19 Mar 2025
Amount
Supply fixing testing and commissioning of MAIN LT panel board suitable size CPRI approved OF size –900x500x1200mm in door type factory made, floor mountade type fabricated of 2mm thick CRCA sheet and inner sheet of MS sheet 1.6 mm thick, 3 mm thick for gland plate i/c cleaning & finishing complete with 7 tank process for powder coated panting with welded/bolted 3b construction, having 1600 amp capacity extensible type tpn aluminium alloy busbar for high conductivity, dmc/smc busbar support, including connection all exisiting cable with ACB & MCCB terminal all as specified and directed by EIC at the site requirment complete including the following component:- PLC SECTION- When transformer 1 and transformer 2 are on, buscoupler 1 will be off and the remaining buscouplers 2, & 3 will be on And all dg will off. If any case transformer gets damaged & maintenance then in that case the DG will run and the buscoupler of same dg will OFF. When all DG are on, buscoupler 1, 2 &3 will be off And all TRF will be off. AS PER REQUIREMENT OF LOAD A MASTER DG IS ALWAYS ON AND OTHER DG START, STOP AS PER REQUIREMENT OF LOAD CONDICTION BUSCOUPLER OPERATION ARE ALSO POSIBLE WITH DG SET IN AUTO AND MANUAL BOTH CONDICTION The provision that we can start and stop DG IN BOTH MANULA MODE AND AUTO MODE.
Dismantling & taking out old/unsv BUS BAR panel and supply and fixing LT bus bar panel OF size – 1 x 0.6 x 0.50 mtr out door type factory made pedastal type, fabricated out of 3.15 mm CRCA sheet and inner sheet of MS black sheet and slopy roof and spray painting two coat insiade and outside with synthetick enamle paint of approved shade over a coat of red oxide primer locking arrangement comprise 50 mm size godredge brass pad lock with duplicate keys two earthly terminal suitable cable gland for all incoming and outgoing cable grouting of feeder piller box 40 cm above ground level by providing 90 cm long angle iron of size 50x50x6 mm welded on all the for corner embeded in PCC 1:2:4 using 20 mm stone agregrate up to 50 cm deep including connection all exisiting cable with with M CCB terminal all as specified and directed by EIC at the site requirment complete including the following component:- (1) incoming (i) MCCB 4P Thermal magnatic & fixed type 125 Amps , 16 KA -01 No. (2) Outgiong (a) Aluminium bus bar rating 200 Amps -04 Nos . (b) Indicating lamp-01 Set (LED Type)
S&F (in replacement) of automatic street light control panel of 3mm thick MS plate of size 500mm x 500mm x 300mm with fixing on existing pole with sutale size of clamp and nut bolt consisting of time switch digital type with contactor, 63A MCCB, 4 pole, 415 V 25KA with Voltmeter Digital type (0-500V) and Ammeter digital type (0-100A) incl. making electrical connection with sutable size of copper wire etc.
Earthing for LT feeder pillar box complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground earth pit not less than 2.25mtr below normal GL with the top edge of the plate not less than 1.5 mtr below the ground level connected by GI strip of size 32x6 mm thick soldered and revetted to earth plate. GI earth will be protected by using 50mm bore GI pipe (light grade) earth plate to transformer body, LT feeder pillar box and neutral of transformer including flate iron clamp 25x3 mm with nut, bolts and washers complete with watering pipe 20mm bore GI pipe (light grade) and chamber PCC (1:4:8) type D2 using 40mm grade stone aggregate, coping shall be PCC (1:3:6) type C1 using 20mm graded stone aggregate and PCC (1:2:4) type B1 using 20mm graded stone aggregate pit cover 50mm thick re-inforced with 8mm for MS bar at 80mm c/c both way including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No 3 of SSR part and as specified including earth plate packed all sides with charcoal dust, common salt and testing complete including GI sheet funnel, wire mesh etc as directed
Taking down Old UNSV ACSR conductor from LT poles including insulator clamps nut bolts and service connections complete all as specified and directed.
Supplying and laying or fixing in replacement, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 240 sqmm cross sectional area, 3.5core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.
All as per item No. 20 herein above but of size 25 Sqmm 4 core
All as per item No. 20 herein above but of size 400 Sqmm 3.5 core
S& F Straight through joints (Heat Shrink Kits) for LT underground cable indoor/outdoor type complete for Armoured ,PVC sheathed Aluminium conductor cables Including excavating earth, identifying the fault, making proper joint of cable after rectification & returning soil back to earth, complete all as specified and directed for the following sizes:-
- do - but of size 400 Sqmm 3.5 core
- do - but of size 240 Sqmm 3.5 core
Excavation in trenches in soft/loose soil not exceeding 1.5M wide and not exceeding 1.5 M in depth and getting out, including trimming the sides including forming bottom surface to required levels for laying of cables complete all as specified and directed.
Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick after laying of cable complete all as specified and directed.
Removing surplus excavated material (soil) to a distance not exceeding 50M and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed.
M&L for spreading clean dry sand cushioning to under ground cable in layers of 23 cm (8 cm deep before laying of cable and 15cm deep over the cable) after laying the cable in trenches including punning thiockness upto 18 cm complete as directed. Note :- Only punned thickness will be considered for payment.
Bricks; common burnt clay building bricks, sub-class ‘A’ designation 75 as specified and as directed
M&L for GI tubing (light grade) with all necessary fittings laid in trenches/ under road crossing/ fixed on poles, wall, under floor etc complete all as specified and directed.
(a) 100 mm bore
(b) 80 mm bore
M&L Cement concrete 1:3:6 type C2 ( using 40 mm graded stone aggregate) as in foundation and the like complete all as specified and directed by Engineer-in-Charge
M&L for 15 mm thick rendering on brick work or complete surfaces in CM 1:4 finished fair & even without extra cement, cement mortar complete all as specified
S& F mild steel Joist, Channel, angle or tee sections, fixed & embadding for cable duct including all connected works, confirming to F-410 W (Gde-E250) quality-A including two coats syntthetic enamel paint over one coat read oxide primer complete.
M&L for pre cast RCC 1:2:4 type B1 using 20mm graded stone aggregates as in cover slab for soakage well/ manhole and similar works supported on walls and set in cement mortar 1:4 complete. Note- Reinforcement steel will be measured & paid separately
M&L for mild stell TMT reinforcement bars of grade FE-500, 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including mild steel wire (annealed) not less than 0.90mm dia. or securing with clips complete all as specified and directed by Enineer-in -Charge
S&F (in replacement) of automatic street light control panel of 3mm thick MS plate of size 500mm x 500mm x 300mm with fixing on existing pole with sutale size of clamp and nut bolt consisting of time switch digital type with contactor, 63A MCCB, 4 pole, 415 V 25KA with Voltmeter Digital type (0-500V) and Ammeter digital type (0-100A) incl. making electrical connection with sutable size of copper wire etc.
M&L (in replacement) Earthing for LT feeder pillar box complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground earth pit not less than 2.25mtr below normal GL with the top edge of the plate not less than 1.5 mtr below the ground level connected by GI strip of size 32x6 mm thick soldered and revetted to earth plate. GI earth will be protected by using 50mm bore GI pipe (light grade) earth plate to transformer body, LT feeder pillar box and neutral of transformer including flate iron clamp 25x3 mm with nut, bolts and washers complete with watering pipe 20mm bore GI pipe (light grade) and chamber PCC (1:4:8) type D2 using 40mm grade stone aggregate, coping shall be PCC (1:3:6) type C1 using 20mm graded stone aggregate and PCC (1:2:4) type B1 using 20mm graded stone aggregate pit cover 50mm thick re-inforced with 8mm for MS bar at 80mm c/c both way including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No 3 of SSR part and as specified including earth plate packed all sides with charcoal dust, common salt and testing complete including GI sheet funnel, wire mesh etc as directed
M/s Vatsh Raj and co (BID ID -3281660)
SHREE Glass and Plywood (BID ID -3275522)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .