Repair and Maintenance of Public Toilet at Front of Stadium in Pollachi Municipality

Dismantling of existing damaged Plain cement concrete removal of waste materials including all labour charges and clearing away from the site etc complete as per std specification

Removel of existing damaged Plastring Surface lincluding all labour charges and clearing away from the site etc complete as per std specification

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) arnd eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of Jall materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as |per standard specification

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Paving the floor with Double charged Vitrified tiles |of approved quality and colour of size 600x600x8mm thick of approved make, quality land colour in al| floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid |straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as irected by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and |quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x6 mm in all floors over a base layer of cerment mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand), 2Omm thick laid in-situ and pointed with same coloured cement

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and Conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Plastering with cement mortar 1:5 (0ne part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supply and Fixing of MS Stand For Sintex Tank

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including |thorough scrapping, clean removal of dirt, etc Complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris,

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware |of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XIl with sand cushion

Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (For electronic |regulator) (5 Points Per Coil) SD 22

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD 458

Supply and fixing of single box type 4' x 40W |fluorescent fitting complete with copper choke ,condenser starter lamp with TW round block on wall or ceiling with tube with PVC unsheathed |leads from terminal to the fitting tube light etc., complete SD 88

Supply and delivery of UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance.

Supply and delivery of PVC Specials water pressure in residential areas do not normally exceed the maximum tolerance.

25mm bend

25mm Tee

32mm Bend

32mm Tee

Waste Not Tap

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cuting, threading and fixing charges etc. 1000 L