REPAIRS/MAINT OF INTERNAL ELECTRIC SUPPLY AND OTHER ELECTRIFICATION WORKS AT DAD COMPLEX AND WELCOME MAINTAINENCE TO BLDGS (E/M PORTION) AT VARIOUS LOCATIONS UNDER GE STM CHENNAI

Amount

Taking down carefully copper/ Aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit.

M & L for Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including 25mm dia non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories or casing capping incl accessories fixed on wall / ceiling or concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 cm girth, including Provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-

One light point controlled by one switch

One fan point controlled by one switch and one regulator

One 3 pin 5 Amps switch socket on independent board

One 3 pine 5 amps switch socket on same board along with other switches.

One bell point controlled by bell push switch on independent board.

All as per item No 2.00 herein before but with 2.5 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board.

M & L for Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including 25mm dia non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories concealed on wall / and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 cm girth, including Provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-

One light point controlled by one switch

One fan point controlled by one switch and one regulator

One 3 pin 5 Amps switch socket on independent board

One 3 pine 5 amps switch socket on same board along with other switches.

One bell point controlled by bell push switch on independent board.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 10 sqmm including one run of 10 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv and necessary chase cutting all as specified and directed. Note :- 2 runs of 10 sqmm cable, one run of 10 sqmm cable and one run of 25mm dia rigid PVC conduit shall be measured as one unit length.

All as per item No 5 herein above but with 2 runs of 6 Sqmm and one run of 1x 6 sqmm earth wire in PVC conduit as specified and as directed. Note :- 2 runs of 6 sqmm cable, one run of 6 sqmm cable and one run of 25mm dia rigid PVC conduit shall be measured as one unit length.

All as per item No 5 herein above but with 2 runs of 4 Sqmm and one run of 1x 4 sqmm earth wire in PVC conduit as specified and as directed. Note :- 2 runs of 4 sqmm cable, one run of 4 sqmm cable and one run of 25mm dia rigid PVC conduit shall be measured as one unit length.

All as per item No 5 herein above but with 2 runs of 2.5 Sqmm and one run of 1x 2.5 sqmm earth wire in PVC conduit as specified and as directed. Note :- 2 runs of 2.5 sqmm cable, one run of 2.5 sqmm cable and one run of 25mm dia rigid PVC conduit shall be measured as one unit length.

All as per item No.5 herein above but with 2x1.5 sq. mm + 1x1.5 sq. mm earth wire in PVC conduit or casing capping as specified and as directed. Note :- 2 runs of 1.5 sqmm cable, one run of 1.5 sqmm cable and one run of 25mm dia rigid PVC conduit shall be measured as one unit length.

All as per item No 5 herein above but with 4 runs of 10 sqmm and one run of 2x10 sq.mm earth wire in PVC conduit as specified and as directed. Note for item No.10 :- 4 runs of 10 sqmm cable, one run of 10 sqmm cable and one run of 25mm dia rigid PVC conduit shall be measured as one unit length. Note for item Nos to 5 to 10 :- (a) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (b) For concealed wiring wherever required cutting chases shall be included in the respective item.

Supply and fix flexible PVC pipe of 25-40 mm dia complete all as specified and directed

Supply and Fix Rigid Non metallic PVC Conduit 20mm dia including Removing old UNSV conduit all As Directed. Note: The quoted rate shall be inclusive of removing old wiring and drawing the same after removal of conduit

Taking down carefully by unscrewing from boards/outlet boxes, wall ceiling fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, with plug, switch fuse and regulators etc., taken as credit and making good the disturbed surfaces of wall etc all as directed.

S& F Ceiling rose surface Bakelite 65mm x 50mm two to three terminals all as directed.

Supply and Fix Switch piano flush type 5 amps single pole, one way, 240 Volts all as directed.

Supply and Fix Switch socket outlet 3 pin, 5 amp, flush type all as directed.

Supply and Fix Socket outlet 3 pin 5 Amps flush type all as directed.

Supply and Fix Bell push flush type 5 amps single pole 240 Volts all as directed.

Supply and Fix Buzzer, AC, 230 volts, single pole all as directed.

Supply and Fix Bell ding dong, AC, 230 volts, single pole all as directed.

Supply & Fix Bell musical type all as specified and as directed.

Supply and Fix Socket outlet 3 pin 15 amps flush type all as directed.

Supply and Fix Switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switch all as directed.

S & F stepped type electronic fan regulator flush type on the exiting phenolic laminated sheet extra as required.

Supply and Fix Switch modular flush DIRECT TO FIT press type 10 /20amps single pole, one way, 240 Volts all as directed.

Supply and Fix Socket modular flush DIRECT TO FIT press type 10 /20 amps single pole, one way, 240 Volts all as directed.

Supply and Fix PVC Gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified

Supply and Fix PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall complete all as specified

S & F Lamp holder insulated body with 1x11w LED bulb complete all as directed.

S & F Lamp holder insulated body with back plate for pendant/batten fittings all as directed.

S & F Modular Fan step regulator, 100/120W - 1 module for ceiling Fan of 1200 mm sweep all as specified and as directed.

S & F 20A Power Unit Athena Modular AC Box Plastic box 4 module plate, 20A starter, 20A socket, 25A plug all as specified and as directed.

S&F Modular white cover with plate with frame 2 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 3 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 4 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 6 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 8 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 12 module incl matching with white cement wk if necessary

S&F Modular white cover with plate with frame 16 module incl matching with white cement wk if necessary

Supply and Modular flush box 1/2 module

Supply and Modular flush box 3 module

Supply and Modular flush box 4 module

Supply and Modular flush box 6 module

Supply and replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps all as specified and as directed.

Taking down carefully existing un-serviceable main switch, DB's including boards, MCCB/MCBs etc, from its original position complete all as directed.

Supply and fix MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed.

Supply and fix MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 8 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed.

Supply and fix MCB Distribution board, 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed

Supply and fix MCB Distribution board, 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix MCB Distribution board, 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix MCCB four pole, 415 Volt, 63 Amps,16 KA, adjustable thermal & fixed magnetic setting complete all as specified and directed.

Supply and fix MCCB four pole, 415 Volt, 125 Amps,16 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed.

Supply & Fix MCB Four pole 415 volts, 40 to 100 amps 'C' Curve 10 kA Capacity all as directed.

Supply and fix MCB SPN, 240 Volt,10-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

Supply and fix MCB SP, 240 Volt,10-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

Supply, Fabricate, install, connect, test and commissioning energy meter EB type panel board , indoor type, powder coated, fabricated with 2mm thick mild steel and suitable sized pressed steel frame work, , bottom with detachable plates, with hinged type door and locking arrangements, chamber for aluminium busbars mounted on suitable insulators and separators, provision of cutting for mounting existing 3 ph KWH meters and provision of transparent glasses -08 Nos with following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, 10 Sq.mm FRLS copper wire with existing system and complete mounted on suitable size angle iron complete all as specified and comprising of the following :- a) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 200 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps on incoming side. b) Incoming - (i) MCCB thermal magnetic release type of capacity 63 Amps, 4 pole, 415 volts, 50 Hz, 20 KA. Make : Havells/Indoasian/Legrand. - 01 No c) Outgoing - (i) MCB SPN, 240 volts, 40 Amps. Make : Havells/Indoasian/Legrand. - 07 Nos (ii) Outgoing - (i) MCB SPN, 240 volts, 10 Amps. Make : Havells/Indoasian/Legrand. - 01 No

Supply, Fabricate, install, connect, test and commissioning energy meter EB type panel board , indoor type, powder coated, fabricated with 2mm thick mild steel and suitable sized pressed steel frame work, , bottom with detachable plates, with hinged type door and locking arrangements, chamber for aluminium busbars mounted on suitable insulators and separators, provision of cutting for mounting existing 3 ph KWH meters and provision of transparent glasses -07 Nos with following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, 10 Sq.mm FRLS copper wire with existing system and complete mounted on suitable size angle iron complete all as specified and comprising of the following :- a) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 200 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps on incoming side. b) Incoming - (i) MCCB thermal magnetic release type of capacity 63 Amps, 4 pole, 415 volts, 50 Hz, 25 KA. Make : Havells/Indoasian/Legrand. - 01 No c) Outgoing - (i) MCB SPN, 240 volts, 40 Amps. Make : Havells/Indoasian/Legrand. - 06 Nos (ii) Outgoing - (i) MCB SPN, 240 volts, 10 Amps. Make : Havells/Indoasian/Legrand. - 01 No

Supply, Fabricate, install, connect, test and commissioning energy meter EB type panel board , indoor type, powder coated, fabricated with 2mm thick mild steel and suitable sized pressed steel frame work, , bottom with detachable plates, with hinged type door and locking arrangements, chamber for aluminium busbars mounted on suitable insulators and separators, provision of cutting for mounting existing 3 ph KWH meters and provision of transparent glasses -09 Nos with following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, 10 Sq.mm FRLS copper wire with existing system and complete mounted on suitable size angle iron complete all as specified and comprising of the following :- a) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 200 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps on incoming side. b) Incoming - (i) MCCB thermal magnetic release type of capacity 63 Amps, 4 pole, 415 volts, 50 Hz, 20 KA. Make : Havells/Indoasian/Legrand. - 01 No c) Outgoing - (i) MCB SPN, 240 volts, 40 Amps. Make : Havells/Indoasian/Legrand. - 08 Nos (ii) Outgoing - (i) MCB SPN, 240 volts, 10 Amps. Make : Havells/Indoasian/Legrand. - 01 No

Supply and fix P17 tempra plug and sockets DB, 240 volts 63 Amps, 3P+N+E-FP fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Taking down carefully sheet metal enclosure DB's of any type and size and refixing the same after cleaning, repairing with all the electrical connection complete all as directed.

Supply and fix MCB DP, 240 Volts, 20-63 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

Taking down old UNSV LED tube and taken as credit and Supply and fix LED tube 18/20 Watt Single end connection Ultra bright LED polycarbonate Tube light with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders, LED tube all as specified and as directed.

Taking down old UNSV LED tube fitting and taken as credit including Supply and fix Wall mounted LED Batten with tube extruded Aluminium heat sink provided for efficient heat dissipation & integrated electronic driver of Lamp type: 22W LED life time of 30000* hours including lamp all as specified and as directed. Make: HAVELLS catalogue no ENDURALINEAR NEO BS 22WLED865SPCWH/ PHILIPS cat No B1021LED25S6500PSUGRST/ CROMPTON cat no Radiance ray plus 22W LDRR24-CDL/ HLB-03-22-CW-AL of Halonix/ Bajaj BCLAB 22W LED P

Taking down old UNSV LED tube fitting and taken as credit including Supply and fix Wall mounted Endura LED Batten, high efficacy - 1051m/W, Short circuit & Voltage cut off protection, wide operating voltage range of 140V to 270V wide, lumen output of 4000 , 40W including lamp all as specified and as directed. Make: Bajaj BCLAB 40W LED P/ Philips BN 308C LED 40S - 6500 L 120 PSU WH/ Halonix HLB-08-40-CW/ Havells STOUT Plus 1200BS 40WLED857 SP CWH

Taking down old UNSV LED tube fitting and taken as credit including Supply and fix Wall mounted LED Batten, Aluminium Housing & integrated electronic driver of Lamp type: 10W LED life time of 30000* hours including lamp all as specified and as directed. Make: as per HAVELLS catalogue no ENDURALINEAR NEO BS 10WLED865SPCWH/PHILIPSB1021LED10 S 6500PSUGRST/CROMPTONRETRO LED T5 LT5RT-9-CDL/ Bajaj BCLSB 10WH/ HLB-03-10-CW-AL of Halonix

Taking down old UNSV LED tube fitting and taken as credit including Supply, Installation, testing and commissioning of Surface mounted LED luminaries with Mid flux LED using efficient optics , System lumen efficacy > 80Lumen/Watt , System Luminous flux of >=3200 lumens, System Wattage <=42W with 50,000 hours burning life. Colour rendering index > 70 and Colour temperature 5000K/6500K. CRCA housing with high efficiency opal diffuser. Luminaries sealed from bottom. Inbuilt gear . Zero maintenance, Zero mercury. Driver Surge protection > 1.5kV. Electronic In-Built PF > 0.9 , THD < 10% , IEC Compliant for Safety , Performance & EMI. The type shall be of 2'x2'. Make: HAVELLS catalogue no VENUSNEO TW 2X2PLR42WLEDWMOD / PHILIPS BN 308C LED 42S-6500 L 120 PSU WH/ CROMPTON LCTLRP-42-FO-CDL (2X2) / HLFPS-22-02-42-CW-R of Halonix

Taking down old UNSV LED tube fitting and taken as credit including Supply, Installation, testing and commissioning of Surface mounted LED luminaries with Mid flux LED using efficient optics , System lumen efficacy > 80Lumen/Watt , System Luminous flux of >=3200 lumens, System Wattage <=15W with 50,000 hours burning life. Colour rendering index > 70 and Colour temperature 5000K/6500K. CRCA housing with high efficiency opal diffuser. Luminaries sealed from bottom. Inbuilt gear . Zero maintenance, Zero mercury. Driver Surge protection > 1.5kV. Electronic In-Built PF > 0.9 , THD < 10% , IEC Compliant for Safety , Performance & EMI. The type shall be of 2'x2'. Make: Havells cat No. INTEGRANEOSURFACEDLS15WLED840S/Philips CAT No. SM251CLED16S-6500PSU WH/Crompton cat No. LCDSPNL-R-18-CDL or equivalent to Halonix / Bajaj

Taking down old UNSV LED tube fitting and taken as credit including Supply, Installation, testing and commissioning of 15 W Surface mounted LED luminaries down lighter with white powder coated aluminium housing with integrated electric driver all as specified and as directed. Make: Havells cat No.INTEGRANEOSURFACEDLS15WLED840S/ Philips CAT No. SM251CLED16S-6500PSU WH/Crompton cat No. LCDSPNL-R-18-CDL or equivalent to Halonix / Bajaj

Taking down old UNSV LED tube fitting and taken as credit including Supply and fix Wall mounted LED Batten with tube extruded Aluminium heat sink provided for efficient heat dissipation & integrated electronic driver of Lamp type: 20W LED life time of 30000* hours including lamp all as specified and as directed. Make: Havells cat part No. LUMILINEPLUSBS20WLED865SPCSS/ CROMPTON cat part No.TRIMLINE LDL-20-WW/ HALONIX cat part No- LED AL BATTEN HLB-03-20-CW-AL-HL1/ Bajaj BCLAB 20W LED P / Philips BN 308C LED 20 S-6500 L120 PSU WH

Taking down old UNSV LED tube fitting and taken as credit including S&F environment friendly , ultra modern, energy saving, surface mounted, decorative LED Bulk Head luminaire 10 W with IP 65 protection all as specified and as directed.

Taking down old UNSV LED tube fitting and taken as credit including S&F LED 35 W well glass luminaries equipped with new age technology which consume less energy without lighting level, highly durable, usable in rugged environment for Bldg security including making suitable provision for mounting the fitting complete all as specified and directed

Taking down the old UNSV Bed lamp fitting and taken as credit including Supply, Installation, testing and commissioning of LED Wall light with system wattage not more than 4W, using 3W for LEDs. The lumen output of LED shall be (Light source) shall not less than 230 lumens. The housing shall be of aluminium and white colour coating. The head of the luminaries shall be adjustable type. The beam angle shall be < 50 deg. Lamp lifetime up to: 15,000 hrs. Total lumen output fixture: > 170 lm. Bulb technology: LED, Safety Extra Low Voltage. Mains power: Range 220 V–240 V, 50-60 Hz. IP code: IP20, protection against objects bigger than 12.5 mm, no protection against water. Class of protection: I - earthed. The luminaries shall be integrated type. The Net weight shall not exceed 0.3 kg.

S & F in replacement Bldg Sec lights 30 W IP 66 road way luminaire with high powers LEDs as light source and electronic driver with mounting GI Pipe 40mm dia 900mm long fixed on wall complete all as specified and directed. Make: Havells cat No. ENDURAPEARLSL30WLED757SASYTOPCMP/ HALONIX cat no HLSLD-09-30CWL-R/ CROPTON cat no. LSTS-30-CDL/NL-M/ Wipro cat No.LR02-331-XXX-57-XX 30Watt

S & F in replacement wall mounted regal batten for T8 LED tube complete all as specified and directed.

S & F in replacement LED bulb 12W suitable for batten/ pendant holder all as specified and directed.

Dismantling existing UNSV hylam sheet of any size from boards removing switches etc. Supply and fix hylam sheet 3mm thick including necessary cutting of suitable opening for switches, sockets, regulators, etc refixing of switches, sockets, regulators, etc replacing screws and connecting up and testing.

Repairs to fluorescent tube light fittings fixed on wall/ceiling/suspended etc., upto 2 x 40 watts, any type/make/model, by replacing following unserviceable items/parts by supply and fixing including checking and rectifying defects in internal wirings and testing all as specified and directed :-

Choke 40/36 watts

Choke 28 watts for EEFTL fittings

Starters 40/20 watts , 240 V / 110 V.

Tube 40/36 watts

Tube 28/20 watts T5

Bi-pin holder (side holder) (as per existing model)

Supply and Replacement LED lamp 13/11w 2P/4P

Supply and Replacement CFL lamp 18w 4 Pin/2 cross pin

Supply and Replacement CFL lamp Retro fit 20w direct fit type

Supply and Replacement CFL lamp warm white(yellow) Retro fit 11/14 w direct fit type

Supply and Replacement 11/13 w choke suitable for Mirror Fittings

Supply and Replacement CFL lamp 36 W 2P/4P

Supply and fix in repair of retrofit lamp 11 watt E-27/B22 type suitable for 230 Volts 50 Hz AC supply complete including taking out old/unserviceable complete as directed

Supply and Replacement of coloured Globe type Incandescent bulb 15 watts with Red/Green Glass Thread type for engagement Fitting

Supply and Replacement of Fancy Flame type Incandescent bulb 15 watts with Clear/Milky Glass Thread type.

Supply and Replacement of lamp Halogen 50 w 12 Volts DC 2P.

Supply and laying 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 4 sq. mm nominal cross section in service connections

All as per item No 88.00 herein above but 6 sq.mm twin core

M&L painting of ceiling fan complete , using spray gun, in site with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust complete all as specified and directed

Taking down Fans ceiling/Exhaust/wall of any sweep, capacity make, model, sealing cable and dismantling blades, removing fan and blades for repair/servicing/replacement of parts/rewinding and refixing the same after replacement of spares and parts servicing rewinding complete all as specified. Note : spare parts and rewinding and servicing shall be measured separately

Dismantling ceiling fan, exhaust fan, wall fan, pedestal fan upto 1400 mm sweep of any make/model/sweep, overhauling /servicing, greasing/lubricating, insulating electric leads, replacing cotter pins, bolts and nuts with copper pin, assembling back, checking for proper fixing and safety and testing all as specified and directed

Dismantling the following of any make/model/sweep, removing the burnt out winding wires, rewinding with winding wires and insulation materials overhauling/servicing, greasing/lubricating, insulating electric leads, replacing cotter pins, bolts nuts, replacing unserviceable bearing, bushes assembling back checking for proper fixing and safety and testing all as directed and specified for:-

Ceiling fan upto 1400 mm (56") sweep.

Exhaust fan upto 450 mm sweep.

Wall mounting/ Pedestal fan/air circulator upto 600 mm sweep.

Removing following unserviceable parts/items, supply and fix new items/parts of same materials existing and as described below for ceiling/exhaust/pedestal fans etc

Ball bearing for ceiling fan/Exhaust fan/Wall fan/Pedestal fan upto 1400mm sweep.

Bush bearing for ceiling fan/Exhaust fan/Wall fan/Pedestal fan upto 1400mm sweep.

Fan condenser capacitor 2.5 mfd.

Fan condenser capacitor 4 mfd.

Fan condenser capacitor 6 mfd.

Fan clamp for ceiling fan complete with rubber shackle, shackle bolt, nut, cotter pin, clamp complete.

Down rod 15 mm dia medium grade including cutting required length, drilling holes, painting complete.

Fan blade of existing model/Make/Type for upto 1400 mm sweep

Shaft assembly including lath works complete for ceiling fan/Exhaust fan/Wall fan/Pedestal fan upto 1400mm sweep

Taking Down and Refixing incl Painting of water heaters (Geysers) of following capacity of any make/model in site with synthetic enamel paint by brush including filling of cavities with fillers one coat after cleaning all dust etc including writing MES numbers etc all as specified and directed for :

Water heater 25 litres capacity.

Water heater 50 litres capacity.

Dismantling following unserviceable items/parts from water heaters of any capacity/make/model, supply and fix new items/parts of same capacity/type/model, connecting up and testing :-

Heating element 1.5 KW capacity AC 230 V and conforming to IS specifications screw/flange type.

Heating element 2.0 KW capacity AC 230 V and conforming to IS specifications screw/flange type.

Thermostat suitable for water heater upto 50 litres capacity.

Indicator lamp any type suitable for water heaters upto 50 litres capacity.

Non return valve 15 mm dia size.

PVC connections with brass check nuts 15 mm dia x 45 cm long for hot water supply.

PVC connections with brass check nuts 15 mm dia x 45 cm long for cold water supply.

Rubber gasket flat/'O' ring type suitable for water heater

PVC cable 3 core flexible copper conductor cable of size 40/0.193

Plug top 3 pin 15 amps.

Pressure release Valve suitable for geysers upto 50 litres capacity.

Removing the old rusted /worn out MS bolts and nuts and grouting 4 nos new MS "T" bolts and nuts in brick walls ( MS bolt size 3/8 " x 6" with washers ) and making good the disturbed surfaces incl plastering , curing etc all as directed.

M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15mm bore dia and connected to main control board all as shown in Electrical plate No.3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6mm dia MS bar at 100mm centre to centre both ways and MS 6mm dia hook complete all as specified and directed.

Supply & Fixing of LED driver for LED light fittings any type and any make upto 40Watts

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation of stays & poles, laying of cables etc.., not exceeding 10 sqm on plan and getting out in soft/loose soil all as specified and as directed

Returning, filling in, using excavated soil including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed

Supplying and spreading in trenches fine dry river sand including cleaning, spreading, levelling, punning for cable cushioning and gently punning down in layers complete all as specified and as directed. Note : Thickness of sand cushioning shall be measured after punning and consolidating of sand.

M & L for removing old bricks from trenches and supply, lay in trenches burnt Bricks, old size, Sub class "B" for cable protection all as specified and directed. Note: Broken bricks shall be taken as credit

Disconnecting and taking out the old unserviceable LT UG cable in trenches, wall & poles and taken as credit including supply and Laying in trenches / poles / wall etc LT UG Cable XLPE insulated, armoured, heavy duty with multistranded aluminium conductor, 1100 volts grade conforming to IS specifications and of the following sizes:- Note: Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used wherever required while connecting cables to the panel board. Earth work such as excavation, refilling etc, shall be measured and paid separately under relevant item.

(a) LT UG cable 4 core 16 sqmm

(b) LT UG cable 4 core 25 sqmm

M&L for removing the existing street light fitting of any type & make and Supply & installation of new 90 W LED 6000K New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaries with high power LED as light source in the existing pole duly wired complete all as specified and directed. Make:- Havells Cat part ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO/Crompton cat part No. RAPTOR NEO-II TPR-411-90-57-SL-GL-NSG/ Wipro skyline LED cat No. LR02-102-XXX-57-XX/ Bajaj cat No. BRTFG 90W LED CR WW/ Halonix HLSLD-06-90-CWL-R-SH

RADHIKAGANESH ENTERPRISES

PSK Enterprises