Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹30.0 L+₹15,851 (0.53%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹31.8 L+₹2.0 L (6.57%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹34.7 L+₹4.9 L (16.3%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹34.8 L+₹4.9 L (16.5%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
25 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAMS
GE NAMS AMRITSAR
CERTAIN REPAIR TO NEW KATHANIA AND SHANGARA ENCLAVE UNDER AGE B/R-I AT NAMS
2023_MES_610997_1
GE NAMS-53/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE NAMS
CLASS D CATEGORY a(i)
8 documents required · 8 mandatory
₹500
GE NAMS
₹76,000
Yes
27 Sept 2023
27 Jul 2023
1 Sept 2023
27 Jul 2023
25 Aug 2023
11 Aug 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.
Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.
S&F mild steel framed work just as in doors, ventilators, and as in hold fast, ladders, railings, Framed Guard bar, railings etc with ends of bars shouldered and/or riveted complete welded hinged and similar work Conforming to Fe-290 Gde-E-165 complete including holdfast with PCC 1:2:4 all as specified and directed by Engr-In-Charge.
S&F, 35 mm thick, 2nd class hard wood, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.
S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed.
S&F mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames all as specified and directed by Engr-in-charge.
S & F aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and directed.
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.
S&F in repairs 300mm long mild steel ordinary rat tail rod pattern spring with roller plate including fixing with nails/ bolts or welded complete all as specified and directed.
Demolition of brick works in cement mortar complete all as specified and directed.
M & L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, complete all as specified and directed.
Description all as per item No 16.00 above but except bricks complete all as specified and directed.
Taking down cement plaster on brick/stone/concrete walls /ceiling incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed.
M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work and finishing the surface even and fair (without using extra cement) incl WPC @3% weight of cement etc. complete all as specified and directed. Note-WPC will be measured and paid separately under appropriate items
M&L for rendering 15mm thick in cement mortar (1:6) on other than fair brick work or concrete surfaces of walls , finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.
Supply only, integral water proofing compound. complete @ 3 % by weight of cement
M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.
Material and labour for preparation of old wooden surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of old steel surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in patches or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.
M&L for Prepration of old surfaces of ceiling including scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying two coat of white wash on ceiling surface complete all as specified
M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 09 sqm but not exceeding 0.11 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition of existing tiles and disposing off the demolished material off the premises complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition of existing tiles and disposing off the demolished material off the premises complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick vertical tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in cement mortar (1:4) , including dismantling/demolition of existing tiles and disposing off the demolished material off the premises complete all as specified and directed.
M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 20 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry incl dismantling / demolition of existing tiles and disposing off the demolished material off the premises complete all as specified and directed.
M&L for 50mm thick PCC 1:3:6, Type C-1 (using 20mm graded aggregate) as in Plinth protection, making even and smooth surface without using extra cement incl demolition of PCC and rubbish off the primises etc complete all as specified and directed.
M & L for Plain Cement Concrete Type D-2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete including demolition of PCC complete all as specified and directed.
S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls and in floor incl cutting, chasing in wall, floor or ceiling and making good in CM 1:3 complete all as specified and directed.
S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor complete all as specified and directed.
M & L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc including APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on roof and sunken portion on bitumen surfaces by forced application including chase cutting in roof and making good with CM(1:3) complete complete all as specified.
M & L for applying two coat of undiluted thick coat of acrlyic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed.Make : Asian paint, Sika, Fosroc
S & F in repair for viterous china wash hand basin white flat back size 550 x 400 mm incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erecting stand fixed complete all as specified and directed.
S & F in repair for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest , including joining, filling (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.
S & F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed complete all as specified and directed.
S&F in repair 10 ltrs capacity PVC valveless syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle and brackets including 32mm dia flush pipe of polyethylene of high density for low level cistern complete all as specified and directed.
S&F in repair 450mm long PVC connections with PTMT nuts of suitable for 15mm bore dia pipe complete all as specified and directed.
S & F in repair for 15mm dia pipe fancy type chromium plated long body bib tap with crutch or butterfly handle screwed down to iron pipe with all fittings complete all as specified and directed.
S & F in repair for 15mm dia pipe chromium plated Stop cock/Angle cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed.
S& F for in repair swan neck pillar cock chromium plated fancy type screw for 15mm bore iron pipe complete all as specified and directed.
S & F in repair Chromium plated shower rose 125 mm size with or without swivel joints, any size with arms , including fixing to steel pipe or union complete all as specified and directed
Supply and fixing in repair PVC coated curtain rods 25mm dia including, brackets to hold the rod ,wall to wall & a set of ABS finials ( as per sample kept in GE's office) of approved quality & appropriate qty of ABS plastic rings complete all as specified .
S&F in repair CP Grating125/100/75mm dia with or without hole as per site requirement fixed complete with filling of white cement all around complete all as specified.
M&L for plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken floors including demolition of cement concrete (unreinforced) in ground floor and pavings any thickness (below or above ground level) complete as specified and directed.
M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick, finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC measured separately)
S&F GI tubing 40mm bore medium grade as in sunken spout all as specified and directed
Taking down shutters of any description exc 1.00 sqm & nexc 2sqm each. & refixing in the same opening after rectify the defect,resizing etc with proper fixing with screw/welding complete all as specified and directed.
Mild steel TMT bars 8 to 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips , including welding with mild steel completed all as specified and directed
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks,galvanided or wire staples,or wooden beading in doors all as specified and directed.
S&F 3mm thick figured glass sheet fixed with beads or oil putty in squares over steel window including hacking of old glass panes complete all as specified and directed.
Supplying and fixing factory made Solid PVC Moulded Door shutter with wood free EPS 28-30mm thick (stiles),with 2 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm Plain colour PVC sheet on back face,supplying & fixing in frame at site as per specification &drawing complete all as specified and directed by Engr-In-Charge. supplying and fixing in the frame at site complete all as specified. Colour and design approved and finalised by Engr-In-Charge.
S&F in repair butt hinges 100mm size medium weight cold rolled mild steel including welding to existing frame and making good complete all as specified and directed.
M&L for 18-19mm thick prelaminated particle board,interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws, built in cup board shutters of almirah etc including external teak wood leaping 6mm thick through length and width of shutter all around,including 40mm width piano hinges bright finish electrogalvanised per leaf through length completely fixed,01 no catcher per leaf,01 no 150mm Stainless steel handle per leaf including demolition of decayed board complete all as specified and directed.
M&L for 18-20mm thick prelaminated plywood of grade BWP, both sides balancing white lamination, fixed in partitions of almirah shelves vertical and horizontal to match design including stainless steel brackets/cleat to support with wall and plywood including demolition of decayed plywood complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel kitchen plate rack size 750mm X750mmx250mm deep made of stainless steel ,weight not less than 7.5 kg with folded edges glossy finish complete all as specified and directed.
M&L for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate set in cement mortar 1:6 as in landings,cover slabs for manhole etc,water tank base and similar work complete all as specified and directed including demolition of existing RCC and any formwork.
M&L for glazed ceramic coloured tiles of size 300 mmx200 mm x6- 7mm thick vertical tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in cement mortar (1:4),including demolition of existing tiles and disposing off the demolished material off the premises complete all as specified and directed.
M&L for 18 to 20mm thick for machine cut green marble over riser,steps of stairs and skirting incl 20mm thick cement screed in CM(1:6) set and jointed in neat cement slurry and pointed with white cement (over floor, skirting, almirah, shelves, Kitchen platform, steps etc) mixed with pigment to match the colour complete all as specified including rounding edges and polishing nosing complete all as directed by Engr-in-charge.
Supply and fxing in replacement of rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and brass ball valve 20mm, high pressure with polyethelyne float and fly nuts complete all as specified and directed.
S&F in repair 15mm bore stop cock concealed as in repair long shank chromium plated fancy type screwed down high pressure with crutch or butter fly handle complete all as specified and directed.
Supply and fixing in repair PVC waste pipe 32/38/40mm dia, 600 to 750mm long complete all as specified.
S&F in repair towel rail CP 600mm long D-type fixed with and including Chromium plated brass screw and plastic cleats complete all as specified and directed.
Supply and fixing sink with drainage board made of stainless steel 1mm thick with plug washer and waste incl fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowl size 410mm x 330mm x160mm complete all as specified.
S&F in repair 20 mm bore dia gate valve,gun metal with iron wheel head,screwed both ends and fixed all as specified and directed.
M&L for Welding in repairs exc 2.5cm but nexc 5cm in length complete all as specified and directed
Demolition of 100 mm dia AC/PVC drain/rainwater pipe as in trench/wall with bend/T etc complete all as specified and directed.
S&F PVC (SRW) pipe 110 mm rain water pipe single socketed in any length with rubber ring joints,fixed to walls with minimum three no clamps fixed etc complete all as specified and directed.
Supply and fixing 110 mm bore PVC (SWR) pipes rain water/drain pipe single socketed in any length joints laid in trenches inclding demolition/Excavation and filling with 1:2:4 complete all as specified and directed by Engr-in-charge.
Supply and fixing 110 mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) bends of any radius without access door complete all as specified and as directed.
S&F PVC(SWR) 'T' single (equal or unequal) 110 mm dia with access doors complete all as specified and directed
S&F in repair PVC (SWR) floor trap 110mm plain with grating including jointing with solvent cement
M&L for PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in roof padding,rounded,chemfered etc including demolition all as specified and directed by Engr-In-charge
Taking down old shutters of any description n.exc. 1 sqm each complete all as specified and directed.
Taking down aluminium window/ Ventilator(each single window or ventilator will be considered as one Job) and refixing in same opening after repairing to damaged/loosened rail sections, tightening of screws, repairing/replacement of rubber packing to aluminium shutter, repairing/oiling to locking arrangement and oiling/greasing, repairing to handle, tower bolt as required and making the shutter smooth as in MAP Accn complete all as specified and directed.
S&F in repair glass panes 3-4 mm thick as in aluminium window/fixed aluminium frame in front of qtrs as in MAP Accn with complete change of rubber/ any packing all around, screwing and fixing it to original position and making good complete at any height of 0 to 10 mtr of building complete all as specified and directed by Engr-In-charge.
S&F in repairs aluminium strip 30mm wide, 1.5mm thick and 1.00 metre length powder coated with rubber rings to be fixed with screws on bottom of existing shutters to guard from snakes/ frogs complete all as specified.
Material and labour for preparation of new plastered surfaces and applying, one coat of wall primer and two coats of weather proof Exterior Emulsion paint as directed by Engr-in-Charge complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying one coat of Exterior weather proof Emulsion paint as directed by Engr-in-Charge complete all as specified and directed.
M&L, kota stone slab flooring 20 to 25 mm thick over and incl cement screed base laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing incl chamfering edge including dismantling/demolition of old stone complete all as specified and directed.
Taking down PE-AL-PE composite pipes 15mm bore concealed/any type including connections complete all as specified and directed by Engr-In-charge.
Taking down PE-AL-PE composite pipes 20mm bore including connections complete all as specified and directed by Engr-In-charge.
Supplying and fixing in repairs swan neck 15mm bore centre hole wash basin mixer cast copper alloy chromium plated screwed down high pressure screwed for iron pipe complete all as specified and directed
Supplying and fixing in repairs CP wall mixer 3-in-1 system with complete provision and fixing for Overhead Shower with 115 mm Long Bend pipe, CP screwed down high pressure with long screwed both ends for 15mm dia bore GI pipe complete all as specified and Directed.
Supply and fixing in repair plastic water closet seat coloured/white(as per site requirement) closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.
Supply and fixing in repair flushing jet chromium plated connection to existing WC including flexible pipe 15mm including all necessary fitting/ assessories complete all as specified.
S&F in repair 32mm bore CP bottle trap for wash hand basin with inlet and outlet screwed for iron pipe or connections including necessary packing,union and cap complete all as specified and directed.
Dismantling cast iron pipe any dia fixed to wall/floor with any type of joints complete all as specified and directed.
S&F 100mm cast iron soil, sand cast pipes, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors.
S&F 100mm cast iron soil,sand cast pipes,waste and vent pipes in any length with or without ears, with cement joints,fixed to walls complete all as specified and directed.
S&F in repair 100mm dia cast iron bends and diminishing pieces or tapers without oval access door complete all as specified and directed .
S&F in repair 100mm cast iron bends diminishing pieces or tapers with oval access door complete all as specified and directed.
S&F in repair for 100mm dia cast iron floor trap,with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.
S&F in repair cast iron cross tee, 100 mm dia equal or unequal fixed with lead joint complete all as specified and directed.
M&L for Raking out Joints/Pointing in cement mortar to brick tiles laid flat in roofs etc and Flush Pointing to brick tiles in CM 1:3 complete all as specified and directed by Engr-in-Charge.
AS CONSTRUCTION
Roop Sons and Co
Chander Mohan Arora Contractor
Saini Constructions
S S CONSTRUCTION COMPANY
Jaspal Construction Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .