REPAIR TO SOFA SETS AND CERTAIN MISC STEEL, WOODEN TP FURNITURE UNDER GE DIPATOLI MIL STATION

Amount

Sofa sets 4/5 seater FD-281 S&F new components of 2nd class HW (shisham) including dismantling unservicable one complete all as specified and as directed. (a) Front Legs

(b) Rear legs

(c) Battens

(d) back rail (3 seater)

(e) Front rail (3 seater)

(f) Back rail (single seater)

(g) Front rail (single seater)

(h) Hand rest

(j) M&L for providing new cushion of 32 density cool foam of size (560 x 530)mm x100mm thick duly upholstered with tapestry cloth as approved (rate not less than Rs 350 /Mtr) complete all as specified and as directed. Make : Feather foam/sleepwell

(k) M&L for providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality (as per sample held with office) with 04 nos velcrow duly stitchedas directed for easy removing/closing purposes etc to cover the foam of size (560 x 530) mm x100mm thick complete all specified and as directed. Cost of tapestry cloth shall not be less than Rs 350 for RM.

Preparation of sufaces of following sofa set by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed. (a) Sofa set 4 seater

(b) Sofa set 5 seater

Table (900 x 600) mm with/ without drawer FD- 223 & 224 S&F new components of 2nd class HW (shisham) including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) M&L for providing top18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

(e) M&L for drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board including provision of knob completed all as specified and directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Rack for records 6`x2`x 6` (a) S & F leg of size (1800x 65x65) mm of rack made up of seasoned shisham wood including dismantling unserviceable one complete all as specified, directed and shown on drawings.

(b) S&F plank of rack of size (1800x150x20)mm made up of seasoned shisham wood including dismantling unserviceable one complete all as specified, directed and shown on drawings.

(c) S&F stiffner of rack of size (550x50x40)mm made up of seasoned shisham wood including dismantling unserviceable one complete all as specified, directed and shown on drawings.

(d) M & L for preparation of old surfaces including minor repair wherever required and painting with two coats grey/white enammeled paint complete all as specified and as directed.

Table Dressing Gents with mirror FD-230 (a) S&F new Looking mirror with frame of 5mm thick of appropriate size with framewith and including 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable one complete all as specified and as directed.

(b) S&F new top/bottom of box made up of pre-laminated MDF board 18mm including dismantling unserviceable one complete all as specified and as directed.

(c) S & F new both sides of box made up of pre-laminated MDF board 18mm thick including dismantling unserviceable one complete all as specified and as directed.

(d) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board and provision of knob including dismantling unserviceable one all as specified and as directed.

(e) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table Dressing Ladies with mirror FD-251 (a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable one all as specified and as directed.

(b) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board one side laminated finish and provision of knob including dismantling unserviceable one all as specified and as directed.

(c) S &F new twin aluminium channel fitted with glass shutter (02 nos) complete as per drg including dismantling unserviceable one all as specified and as directed

(d) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Trestle store room wooden(FD-86) (a) S&F long rail of trestle made up of seasoned sal wood including dismantling unserviceable one complete all as specified, directed and shown on drawings.

(b) S & F side stiffner of trestle made up of seasoned sal wood including dismantling unserviceable one complete all as specified, directed and shown on drawings.

(c) S&F centre stiffner of trestle made up of seasoned sal wood including dismantling unserviceable one complete all as specified, directed and shown on drawings.

(d) S&f leg of trestle made up of seasoned sal wood including dismantling unserviceable one complete all as specified, directed and shown on drawings.

(e) M & L for preparation of old surfaces including minor repair wherever required and painting with two coats black enammeled paint complete all as specified and as directed.

Chair dinning cushioned FD/E6/MAP/10 (R) S&F new components of 2nd class HW (shisham) including dismantling unservicable one all as specified and as directed. (a) Rear leg

(b) Front leg

(c) Side/back/front rails

(d) Stiffener

(e) M&L for providing new 75mm Cushion with tapestry cloth fixed with 12mm thick ply of appropriate size of 32 density cool foam complete with dismantling old one as per sample of tapestry held with this office complete all as specified and as directed. Note:- Cost of tapestry cloth shall not be less than Rs 350/-per meter.

(f) M&L for new tapestry cloth cover for cushion of approved shade & quality as per sample held with office to cover the foam of appropriate size and dismantling old one. Cost of tapestry cloth shall not be less than Rs 350/- per meter.

(g) Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed.

Chair visitors /Chair Writing MAP Trade Pattern (a) Chair visitors of different Make and Model (SEAT & BACK) and re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted.

(b) M&L for new seat & back (Cushion, tapestry & ply) 50mm thick cushion complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted.

(c) M&L for handle of chair visitors of (soft/PV) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed.

(d) M&L for painting two coats of Black paint in iron frame of Chair Visitor of various Make & Models including scraping old painted/rusted parts by emery paper all as specified and as directed.

Book Case FD-45 (a) S & F new top made out of 18mm thick commercial plywood pasted with 0.8mm thick plastic laminated sheet of approved shade including 4mm thick teakwood beading including dismantling unserviceable one all as specified and as directed. Note :- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (ii) Hinges shall be 50 mm of approved quality.

(b) S & F Side portion of Book case made out of 18mm thick commercial plywood pasted with 0.8mm thick plastic laminated sheet including 4mm thick teakwood beading including dismantling unserviceable one all as specified and as directed.

(c) S & F back made out of 6mm thick commercial ply wood including dismantling unserviceable one complete all as specified and as directed.

(d) S & F door shutter of book case made out of / 18mm thick commercial plywood pasted with 0.8mm thick plastic laminated sheet of approved shade hang on 02 Nos 75mm SS hinges including fixing of 75mm CP handle including dismantling unserviceable one all as specified and as directed.

(e) S & F new complete legs (Four legs along with rectangular wooden frame) made out of shisham wood including dismantling unserviceable one complete all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table Dressing Ladies with Stool FD/MAP-II/07 (a) S & F new looking mirror with frame of 5mm thick of appropriate size with frame along with 5mm thick commercial plywood back of the mirror and minor repairs including dismantling unserviceable one all as specified and as directed.

(b) S & F drawer of dressing ladies run on 02 Nos telescopic channel including 50mm SS handle including dismantling unserviceable one complete all as specified and as directed.

(c) S & F door shutter of dressing ladies hang on 02 Nos SS hinges including magnetic catcher and 75mm SS handle including dismantling unserviceable one complete all as specified and as directed.

(d) S & F front side of stool including 75mm SS handle including dismantling unserviceable one complete all as specified and as directed.

(e) S & F new 75mm thick 40 density cushion with approved tapestry/latherire of stool including dismantling unserviceable one complete all as specified and as directed.

(f) S & F new heavy duty castor wheel as approved including dismantling unsercieale one complete all as specified and as directed.

(g) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Desk for junior student (a) S & F new seat of bench size 810mmx300mm made out of 18mm pre-laminated MDF board of approved shade along with edging painted with matching shade including dismantling unserviceable one complete all as specified and as directed.

(b) S & F new back of bench size 900mmx150mm made out of 18mm pre-laminated MDF board of approved shade along with edging painted with matching shade including dismantling unserviceable one complete all as specified and as directed.

(c) S & F new top of desk size 900mmx400mm made out of 18mm pre-laminated MDF board of approved shade along with edging painted with matching shade including dismantling unserviceable one complete all as specified and as directed.

(d) S & F new front side of desk size760mmx160mm made out of 18mm pre-laminated MDF board of approved shade along with edging painted with matching shade including dismantling unserviceable one complete all as specified and as directed.

(e) S & F side portion of desk out of size 250mmx160mm made out of 18mm pre-laminated MDF board of approved shade along with edging painted with matching shade including dismantling unserviceable one complete all as specified and as directed.

(f) S & F new bottom shelf of desk size760mmx300mm made out of 18mm pre-laminated MDF board of approved shade along with edging painted with matching shade including dismantling unserviceable one complete all as specified and as directed.

(g) M & L for welding rusted/broken joints of iron frame wherevered required. Welding will be counted as point welding; 20 cm long welding counted as one point welding complete all as specified and as directed.

(h) M & L for removing of old rusted iron surfaces of desk for junior student applying with emery paper and painted with two coats of synthetic enamel paint of approved shades including 06 Nos heavy duty PVC shoes fixed with iron frame complete all as specified and as directed.

Sofa sets 5 seater (TP) (a) S & F new cushion of 32 density cool foam of appropriate size 100mm thick duly upholstered with fancy tapestry cloth as approved (rate not less than Rs 950/Mtr) complete all as specified and as directed for Sofa Set three Seater.

(b) All as per item No 69 here in before but for Single Seater complete all as specified and as directed.

(c ) Preparation of sufaces of sofa set five (3+1+1) seater by throughly rubbing with emery paper, applying raw/burnt seina uniformly and applying lacquer polish with spray machine two coats to obtain a glossy finish complete all as specified and as directed.

Associated Engineers

Delhi Enterprises

M/s Ray construction

M/S NEHAL ENTERPRISES

M/S Bhushan Kumar Jain