Supply of Tools, Equipments and Machinery at Govt.ITI, Gurugram

Amount

Fire Extinguisher(Foam type) Mechanical foam type,Cylinder capacity 9 kg, pressure upto 10 bar,discharge time upto 15 sec, effective time 3minutes -12 minutes,pressue gauge -diaphragm type epmpty weight min 4 kg and filled upto 15 kg.

Argon gas cylinder Body material seamless mild steel,gas volume of 7 cubic meters capacity, Total weight of empty cylinder must be greater than/equal to 50 kg,gas pressure 140-150 kg/cm2,,Should be as per IS 7285 and approved by Chief controllewr of Explosive.stability peroid of gas in cylinder and warranty of cylinder mimimum 1 year.

Bench vice 150 mm jaw opening,made of cast iron,nut and bolts for fastening.

PORTABLE CIRCULAR SAW MACHINE Specification:- 185 mm 1510W Circular saw

POWER DRILL MACHINE Specification:- 20 mm heavy duty hammering drill machine power 550W

PORTABLE SANDER MACHINE Specification:- Model : GSS2300 professional weight 1.5 Kg Wattage : 190W Speed : 0-12000 RPM

PORTABLE JIG SAW MACHINE Specification:- GST 650 (06015A80EO) Jig saw 450W power

POWER SCREW DRIVER Specification:- 540w 0-2500RPM 6.3mm HEX 14.5mm 6.3mm 1.3Kg power speed tool holder max SKU Po.Sc1564540

CIRCULAR SAW MACHINE Specification:- 300 mm dia

LATHE ,WOOD TURNING Specification:- 150 mm height of centers 1.75 meter bed, motorised complete with a set of turning tools

SET OF TURNING TOOLS FOR LATHE MACHINE Specification:- Drill pro high speed steel at the chisel wood turning tool with wood handle wood working tool-A Blade length 170mm handle length 250mm A-1/2 ' ' Spindle Gauge B-3/4 ' ' Roughing Gauge C-1 ' ' Roughing Gauge D- 5/8 ' ' Shear Scraper F-3/4 ' ' Roughing Gauge G-5/8 ' ' Skew Chisel H-1 ' ' Skew Chisel

PORTABLE DISC SANDER Specification:- 200 mm dai

ELECTRIC HEATER Specification:- 1000/1500 W 1nos. 102. Electric Blower (Portable)

ELECTRICAL DRYING OVEN (SMALL TYPE) Specification:Hot Air Ovens are double walled units’ Inner and outer chamber made of S.S.Gap between the walls fitted with glass wool insulation to avoid heat loses. Heating elements are made of high grade chrome plated microme wire.Digital temperature controller cum indicator with timer and safety controller. Temp.range 35 C TO 300 C and Accuracy: +- 1 C Air Ventilations are placed on top of both sides to remove hot gases / fumes.In memmert Type units heaters placed at the right and left side of the inner chamber. All the control switches & pilot lamps are fitted on the front panel.Trays should be supplied with G.I. wire mesh .oven fitted with on m.s. stand.inner size of oven 2'x2'x3'.fan motor top side uniform the temperature.

Chipping hammer with metal handle 250

Chisel cold flat 19 mm x 150 mm,made of Hardened & Tempered High Carbon Steel

Centre punch 9 mm x 127 mm,Hardened & Tempered High Carbon Steel

Dividers 200 mm,Hardened & Tempered High Carbon Steel

Stainless steel rule 300 mm,Standard Steel Rule of 300 mm Length ,both side marking in inches ,cm & mm,made of stainless steel or spring steel

Scriber 150 mm double point,both sides Hardened & Tempered High Carbon Steel pointed

Flat Tongs 350 mm long,can be used for holdinf hot jobs ,made of steel

Hack saw frame fixed 300 mm,hanlde grip of plastic,frame made of steel

File half round bastard 300 mm,made of High Carbon Steel with plastic handle

File flat 350 mm bastard,made of High Carbon Steel with plastic handle

Hammer ball pane 1 kg with wooden handle,

Tip Cleaner for cleaning oxy acetylene welding tips of variuos sizes,made of stainless steel

Try square 6”,fixed,having markings in inches, cm & mm made of Hardened Steel

MARKING KNIFE Specification:-200 mm LENGTH with handle,Striking Knife for wood scoring 5" hardwood handle HSS hardened steel 1.5"double edged blade handle.

FIRMER CHISEL Specification:- Bevel EDGE 6mm. 10,15,20 and 25mm width (5nos.) with handle

MORTISE CHISEL Specification:- 06,010,15 mm (3 nos.) with handle

RIP SAW Specification:- 600 mm with handle

CROSS CUT SAW Specification:- 250 mm with handle

KEY HOLE SAW Specification:- 250 mm with handle

FRET SAW FRAME Specification:- 150 mm with handle

COMPASS SAW Specification:- 350 mm with handle

MOULDING PLANE SET Specification:- All types of moulding size moulding plane 250 mm with handle

GAUGE CHISEL FIRMER Specification:- 6,10,12,16,20 mm with handle

GAUGE CHISEL SCRIBING Specification:- 6,10,12,16,20 mm with handle

HANDS DRILL Specification:- 6 mm Capacities

COUNTRY DRILL WITH BOW (Ball Bearing Type) Specification:- 620 × 726 mm

EXPANSION BIT Specification:-Blade length can be adjusted individually for a width of 22-76 mm

COUNTER SINK BIT ROSE TYPE Specification:- 12 mm High Speed Steel

PLUNGER SAW SET/PISTOL GRIP TYPE Specification:- 300 × 300 mm

CARPENTER VICE Specification:- 250 mm Jaws

CARVING TOOLS SET Specification:- stanley 16-120 carving set (Chrome) (6 Pieces)

NAIL PUNCH Specification:- FAT Max interchangeable nail set

SURFACE PLATE Specification:- 600 × 600 mm Granite with M.S.stand

BALAJI TRADERS

HIMANSHU TRADING CO.

B.L.ENTERPRISES

ACUMEN LABWARE