Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹48.4 L
EMD Value
₹96,800
Closing Date
30 Nov 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CWE (Army) Bangalore
CWE ARMY BANGALORE 101 Dickenson Road Bangalore 560042
SPECIAL REPAIR TO RING MAIN CONNECTION OF HT FEEDER AT ASC CENTRE AND COLLEGE UNDER GE(CENTRAL)BANGALORE
2026_MES_797997_1
86583/E8
Open Tender
Civil Works
Item Rate
180 days
CWE (Army) Bangalore
As per tender
8 documents required · 8 mandatory
₹500
GE (Central) Bangalore
₹96,800
9 Nov 2026
9 Nov 2026
7 Dec 2026
9 Nov 2026
30 Nov 2026
23 Nov 2026
9 Nov 2026 - 16 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, install, testing & commissioning of outdoor type, welded stainless steel tank with IP-67 protection for SF-6 Tank and IP 54 protection for outdoor enclosure, both Side extensible type compact RMU, (DAS specification compact RMU), 12kV, 630 Amps, 21KA (VCB SF6 enclosed) as per IEC-62271, 3 Way RMU, i.e. 2 incoming + 1 outgoing 630 Amps with copper Bus Bar consisting of 02 No’s SF6 insulated Motorized VCB of 11KV, 630Amp with overload and earth fault protection, capacitive voltage indication, Manometer, cable boots for VCB and castle key interlocked and necessary PCC foundation work including providing MS channel and MS angle as per manufacturer instruction along with bottom cable entry and front cable termination of suitable single run upto 3core 240sqmm HT cable with following specifications complete all as specified and as directed :- | 2 | Each | - | - |
| 1.1 | (i) A01& A02 as incoming VCB, A03 as Outgoing VCB with three position isolator /earthing switch, bus bars, interlocking earth bars and stored spring energy mechanism.
(ii) Stored energy mechanisam for manual operation - 01 No.
(iii) Set of 03 No’s Ring core protection Dual core CTs of suitable ratio as per feeder load, 2.5 VA, Class 1.0- 01 set in each breaker. (Transformer rating 2MVA) Capacitive voltage indication fixed type VPIS 9- 15KV - 01 No in each breaker | - | - | - | - |
| 1.2 | (iv) Control voltage motor 24 DC-01 Nos each Breaker
(v) Self powered OC+EF Protection relay type as per manufacturer recommendation with rechargeable - 01 No in each breaker
(vi) Master trip relay-01Nos each breaker
(vii) Space heater (230V AC)- 01 No each breaker. | - | - | - | - |
| 1.3 | (viii) One No Potential Transformer (PT) three phase, dry type (resin cast) fixed type 11 KV / 110 Volts, 25 VA burden, accuracy class 1.0
(ix) Multi function meter for each breaker.
(x) Under / over Voltage Relay each breaker.
(xi) Impluse withstand voltage: To earth and between phases: 75KV Insulation level: -Power frequency 1 min:28 Kv | - | - | - | - |
| 1.4 | (xii) Enclosure: CRCA sheet powder coated with Siemens grey shade IS 632
Front Cover: CRCA sheet powder coated with Siemens grey shade RAL 7035
Cable Cover: CRCA sheet powder coated with Siemens grey shade RAL 7035 | - | - | - | - |
| 1.5 | (xiii) Cable bushings interface C (400 bolted) , 630Amps
(xiv) Bushings outside cone interface C for connection of external busbars 2x12V DC battery + charger scheme R-Y-B phase indication.
Additional equipment delivered separately or mounted in respective panel. Set of coupling bus bars along with suitable coupling kit - 01No, Operating Handle - 01 No | - | - | - | - |
| 2 | Supply, laying & testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) aluminium conductor,11000 Volts Earthed grade cross sectional area 95 sqmm x 3 Core and required aluminium cable lugs, passing through pipe, laid in trenches or fixed to pole/wall etc., including taking down old cable complete all as specified and directed. | 1,500 | RM | - | - |
| 3 | M & L for Steel tubular swaged poles type 410 SP-64 (12.0 metres long) with cast iron base plate, finial taper plug, bolts, nuts & screws including taking down old poles complete all as as specified & directed. | 6 | Each | - | - |
| 4 | Material and labour for Mild steel cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed including synthetic enamel painting in two coats over a coat of primer complete all as specified & directed. | 3 | Quintal | - | - |
| 5 | Material and labour for SWITCHES AIR BREAK, GANG OPERATED Triple pole, mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 Amps, 6600volts 12 insulator type including taking down un-serviceable air break switches complete all as specified & directed. | 4 | Each set | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
BOQ_895184.xls
BOQ • 2.29 MB
tender86583.pdf
Tender Documents • 0.92 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .