PROVN OF PARKING SHED FOR JCOs/OR MD ACCN AT PLASSEY LINE AND CERTAIN OTHER SANCTIONED WORK AT AGE B/R-II UNDER GE JHANSI

Amount

Surface dressing n exc 30 cm deep and averaging 15 cm deep and getting out in any type Soil

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation ,shafts wells etc n exc 10 sqm on plan and getting out in hard/ dense Soil

Excavation over areas not exc. 1.50m deep in any type of soil and getting out, complete all as specified & directed.

M&L Type D-2 1:4:8 ( 40 mm Aggregate) Cement concrete in foundations, filling and mass concrete

M & L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for mild steel TMT 6 to 8mm dia bars cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends end binding with mild steel wire (annealed)n. less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Use and waste of formwork for foundations, footing, bases of cloumns and plinth beam etc. for flat rough finished surfaces of concrete

Use and Waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.flat rough finished surfaces of concrete

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat rough finished surfaces of concrete

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n exceeding 200mm thick (Horizontal or sloping)

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10cm wide all as specified and directed.

M&L Reinforced cement concrete M-25 (design mix) using 20 mm garded stone aggregate as Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L Reinforced cement concrete M-25 (design mix) using 20 mm garded stone aggregate as in columns

M&L Reinforced cement concrete M-25 (design mix) using 20 mm garded stone aggregate as in Roof beams

M&L Reinforced cement concrete M-25 (design mix) using 20 mm garded stone aggregate as in landing, slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in sheleves and the like

Use and waste of formwork to chajja for flat rough finished surfaces of concrete

M&L Reinforced cement concrete M-25 (design mix) using 20 mm garded stone aggregate as in chajja

M&L Rendering 15mm thick in cement mortar 1:4 on EXTERNAL fair faces or brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement with WPC complete all as specified

M&L Rendering 15mm thick in cement mortar 1:6 on INTERNAL fair faces or brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for Brick work with sub class 'B'/ fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6

M&L for Brick work with sub class 'B'/ fly ash bricks, straight or curved on plan to any radius as in half brick thick wall built in cement mortar 1:4

M&L 40 mm thick Damp proof course in cement concrete type Bo 1:2:4 to horizontal or vertical surfaces including necessary formwork using water proofing compound @ 3% by wt of cement.(WPC will be measured separately)

Supply only Integral water proofing compound

S&F Box type steel Ventilator with 80x40x1.25mm Tubelar sheet frame with side hung shutters (double shutters for glass and gauze) with out sash bars jointed together with and including grills using 12mm square bars @ 10cm C/C and all section size will be as per TD No CEBZ/TD/14/ 2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed by the Engineer-in-Charge

S&F 3.00mm thick figured glass, pin head type and glazing with oil putty in square n exec 0.5 sqm in each pane

Returning, filling in, including spreading, levelling, wateringand well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed by the Engineer-in-Charge

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by the Engineer-in-Charge

M&L Hardcore (Broken stone) of guage exc 63mm but n exc. deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as spd

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate), complete all as specified and directed.

M&L for moorum/red bajri in floors or paving laid in layers n exc 15 cm thick, spread, levelled and rammed including watering

M&L for Earth filling under floor, including spreading, levelling, watering, and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for 75 mm PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection and path laid in alternate panels not more than 3 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC complete all as specified and directed.

M&L for water proofing treatment for roof by applying priming coat of epoxy primer with resin and hardner in 1:3 ratio with water dilution as per manufacturer instructions, applying 2 coats of solvent based Polyurethane liquid applied membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 kg/sqm (each coat), 2nd coat should be applied once 1st coat becomes dry completely all as specified and directed. Make: Asian Paints\ Thermax. Note:(i) The work under this item shall be carried out by the authorized applicator of Manufacturer by using modern techniques. The contractor shall also furnish warranty of quality, finish work and effectiveness of waterproofing treatment under this item for a periof of 10 years from the date of completion along with manufacturer warranty of material for the same period. (II) Height of bldg is more than 10 meters and roof have continous series of trapizium with no staircase to reach at the top of the building

M&L for preparation of new plastered surfaces of walls applying two coats of distemper oil bound white of any tinted over and including a layer of JK/ Birla White wall care putty on wall for getting smooth and even finish of surfaces, complete all as specified and directed

M&L for preparation of new plastered surfaces of walls anf applying two coats of cement base paint, complete all specified and directed

Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for prepared on of new steel surfaces of any description over 10 cm width or girth and applying to coat of synthetic enamel paint over a coat of red oxide primer.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick Wooden texture moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed. Make : Rajshree / Sintex

S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood coloured PVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8, on Page No - 175), complete all as directed. Make : Rajshree / Sintex

M&L 25 mm thick cement concrete in flooring type B1, 1:2:4 (12.5mm graded aggregate)

M&L for Non skid ceramic colored tiles of size 400x400mm, 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. Make : Kajaria / Jhonson/ Somany.

M&L for ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed. Make - Kajaria Jhonson / Somany

S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed

S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. (Make : Ashish, Classic)

S&F of 150mm aluminum handle cast type anodized complete all specified and directed. (Make : Ashish, Classic)

S&F of Ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall with clamps complete all as specified and directed.

S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall with clamps complete all as specified and directed.

S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed.

M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 15 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata

M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 20 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata

M&L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed. Make : Sintex / Vectus / Supreme

S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in replacement of 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff / Pearl

S&F in replacement of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, complete all specified and directed. Make: Hindware/ Cera/ Parryware.

S&F in replacement of angular/stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all as directed. Make : Hindware/ Cera/ Parryware.

S&F for 15 mm bore concealed stop/angle cock CP fancy type with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed

S&F in replacement of bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as directed. Make: Hindware/ Cera/ Parryware .

S&F in replacement of handshower (health faucet) with 8 mm dia, 1.0 mtr long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Hindware/ Cera/ Parryware.

S&F in replacement of bottle trap 32 mm sizewith 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Hindware/ Cera/ Parryware.

S&F SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as directed. Make : Camry / Cera / Parryware.

S&F in replacement of toilet roll holder with flap made of cast copper alloy, chromium plated, complete all as directed. Make: Hindware/ Cera/ Parryware.

S&F in replacement of PVC connection 450 x 15mm dia PTMT (PVC), complete all as directed. Make :Hindware/ Parryware/Cera.

Supply and fix shower rose of PTMT any colour for fixing with 150 mm pipe swivel type fixed to GI pipe

S&F grating square 150 mm size of PTMT (Minimum weight 100 gms)

S&F 32 mm bore waste coupling of PTMT (half of full thread) (Min weight 45 gms each)

S&F tubular towel rail 20 mm dia 600 mm long brass CP including brackets fixed in repairs complete all as directed.

S&F in replacement of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor,complete all specified and directed. Make: Hindware / Cera / Pearl / Parryware / Prayag

S&F in replacement of 1st quality vitreous china ware European type WC with "P" or "S" type traps and same make plastic seat cover of white colour including flush pipe, fixing bolts etc and making good of the wall & floor surface, complete all as directed. Make : Hindware / Cera/ Parryware.

Supply & Fix in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests ( Make:- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality).

S&F in replacement of 1st quality vitreous china wash hand basin, white flat/angle back, size 550x400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, CP waste coupling of 32mm dia size, complete all as specified and directed. Make : Hindware / Cera / Jaquar / Parryware.

S&F for 1st quality vitreous China white urinal flat back (Large size) with and incl CP waste coupling of suitable size, cast copper alloy CP spreader union with discharge pipe duly connected to auto closing angle cock, complete with necessary fittings, complete all as directed. Make : Hindware (Cat No - 60002) / Cera (Cat No - 5001)/Parryware (Cat No - C0575).

Supplying laying and testing of SGSW (Salt glazed stoneware) drain pipe of 100 mm internal dia size, grade ‘A’ (ISI Marked), laid in trenches to level / gradient, jointed in CM 1:1, complete all as specified and directed.

M&L for 150x150 mm dia salt glazed stoneware gully trap, square or round mounted, type "P" as specified.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for drain pipes of 100 mm internal dia size, complete all as specified and directed.

Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs set in cement mortar 1:6.

M&L for PCC Type B-0, 1:2:4 (12.5 mm Stone Aggregate) , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, kerb stop rounded or chamfered in edges as directed

M&L for Construction of Septic tank including excavation any type of soil, foundation in PCC 1:2:4 brick work in CM 1:4 RCC 1:1.5:3 for slab covers including RCC Precaste manhole covers having 6 mm plate embedded all around reinforced cover with angle iron frame vent shaft and sludge chamber etc complete for 100 users (Refer and read TD drg No CEBZ/TD/76/2011 sheet No 1/2 with CEBZ/TD/77/2011 sheet No. 3/3

M&L for Construction of soakage well including excavation any type of soil, foundation in PCC 1:3:6 brick work in CM 1:4. RCC 1:1.5:3 for slab covers including intercepting chamber,Screen chamber filling brick bats etc complete of size 1.8mtrs internal Dia X 3mtrs Deep(Refer and read TD drg No CEBZ/TD/78/ 2011 Sheet No 1/2 and 2/2

S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and including 4mm thick pre-painted non asbestos fibre reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed.

M&L for Excavation for post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm for Hard / Dence soil complete all as specified and directed.

S&F of pre-painted 0.50mm thick galvalume aluminium zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering /cladding to walls, fixed with self tapping screws, complete all as specified and directed.

M&L for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

S&F of steel work in tubular trusses (round, retangular, square including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grade St 240 complete all as specified and directed.

M & L Colour Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness pointed with grey cement and pigment complete all as specified.

S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars railing and similar works conforming to Fe 290. Gde-E165 complete all as specified and directed.

S&F for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain,let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:-

One light / fan / bell / buzzer / exhaust fan point controlled by one no, 1-way, 6 Amps switch.

One socket outlet 3 pin, 6 Amps on independent board,

One 6A socket point controlled by one switch on same board

All as per srl item No. 98.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.

M&L for Circuit/submain wiring alongwith earth wire 2 runs x 4 sqmm + 1 run x 4 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed by Engineer-in-Charge. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

Notes for item No. 98.00 & 100.00 (i) Quoted rate shall deemed to incude the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & caping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing caping may be used in that portion.

S&F, Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed.

S&F, Socket, two-in-one, 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed.

S&F, in repalcement, of Socket, two-in-one, 5 pin, 6 Amp, universal type, 230 volts, complete all as specified and directed.

S&F, in repalcement, of Switch piano type, single pole, one way, 16 amps, 230 volts, complete all as specified and directed.

S&F, in repalcement, of Socket, 6 pin, 6/16 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.

S&F, angle holder, metal cased, bakelite body, 240 volts, complete all as specified and directed.

S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 5 steps , two module, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

Supply and fix of LED batten with CRCA sheet steel box type body pre-wired suitable for and including provision of 1x20/22 Watt (4 feet) retrofit LED tube with PC body, full white and connecting up with twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge. Make: Philips / Havells / Wipro / Bajaj / Osram / Luker

Supply and fix of recessed mounted LED panel light 2'x2' size, 36 watts, full white with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for Amstrong / grid false ceiling complete fix fixing accessories including taking down existing unserviceable light fitting of any description complete all as specified and directed by Engineer-in-Charge. Make: Philips / Havells / Wipro / Bajaj / Osram / Luker

Supply and fix MCB distribution board, TPN, 4 way 415 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separetely. Make : Indo Asian / L&T / Havells / Legrand / Schneider

S& F MCB TPN 63 Amp, 10 KA, 'C' curve, 430 V, 50 Hz Make : Indo Asian / L&T / Havells / Legrand / Schneider

S&F of MCB, C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed. Make : Indo Asian / L&T / Havells / Legrand / Schneider

Taking down ceiling fan of any size carefully, sealing cable end, dismantling blades and removing fan and blades to store for servicing including supply, replacing bearings/bushings, capacitor and terminal connector including capacitor holder suitable for any model of existing fan, Painting of ceiling fans complete, with one coat of synthetic enamel paint by spraying including filling cavities with filler, after cleaning all dust etc and Hanging ceiling fan in its existing or new location and connecting up including provision of 3core flexible copper conductor cable 0.5 sqmm from ceiling rose or connector to fan and testing for satisfactory functioning complete all as specified and directed by Engineer-in-Charge.

S & F 7 W White LED retrofit lamp suitable for B-22 holder base with polycarbonate diffuser and aluminium heat sink

Supply and fix LED batten 9W/10W (2 Feet) complete with polycarbonate diffuser and built in with electronic driver including connecting up with twin core twisted flexible copper conductor cable form ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.Make:

S&F, in replacement of bulk head light fitting including 5W retrofit LED lamp and making all electric connections complete all as directed. .Make: Havells / Bajaj / Wipro / Philips /Osram

Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 25A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.

Supply and fix MCB distribution board, SPN, 4 way , 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. Make : Indo Asian / L&T / Havells

S& F MCB SPN 6-40 Amp, 10 KA, 'C' curve, 230 V, 50 Hz

All as per srl item no. 120 here-in-before but SP 6 to 32 Amp. Make : Indo Asian / L&T / Havells

Supply and fix exhaust fan, 300mm sweep with 04 Nos of blade leafs, 70 W power consumption, 1300 to1400 RPM, 100 % copper winding heavy duty motor with double ball bearings including supply and fixining of metallic louvers and connecting up with 3 core x 0.5 sqmm flexible copper conductor cable from ceiling rose to connector of fan complete all as specified and directed by Engineer-in-Charge. Make: Crompton / Khaithan/ Usha / Bajaj / Almonard

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Polycab/ Finolex/ KEI/ Gloster

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. Make: Finolex / Kisan / Prince / Tirupati /Supreme / Jain Irrigation Sys

M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.

M&L for Tube, 'medium grade' galvanized, with all fittings such as socket, bend, elbow, Tee, reducer, union etc of size 25mm bore and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. Make : Tata / Jindal / Zenith / Prakash Surya/ Swastik

Supply and fix of Gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe of sizes 25mm complete all as specified and directed.

Cutting and screwing of existing steel tubing for alterations or additions of size 40 or 50 mm done in position without taking down and inserting tee branch connection complete all specified and directed by Engineer-in- charge.

M/s JS Constructions