Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.3 CrAccepted-Finance | ₹1.3 Cr | 1 | Accepted-Finance L1 |
| 2 | 2₹1.3 Cr+₹3.4 L (2.69%)Rejected-Finance | ₹1.3 Cr+₹3.4 L (2.69%) | 2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | Suraj Rana L1 | Mahinder Singh L2 |
|---|---|---|---|---|---|
| 1.00 | Cutting in earth work in all kind of soil such as pick, jumper work blasting hard and soft rock chiseling soft or hard rock where blasting is prohibited and disposal of all ececavated earth work in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. | 37.05 | Cum | 595 ₹22,044.75 Lowest | 630 ₹23,341.5 |
| 2.00 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited including dewatering in saturated soil and stacking the excavated earth/metarials upto all leads and lifts up to all lifts, not exceeding more than 3.0 mtr. clear from the edge of excavation and then returning the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts | 1,898.69 | cum | 950 ₹18,03,755.5 Lowest | 1,050 ₹19,93,624.5 |
| 3.00 | Providing and laying cement concrete 1:4:8, 1:cement :4 sand:8 graded stone aggregate 40 mm nominal size and curing complete excluding cost of form work in foundation and plinth including carriage of material with in all leads and lifts, as per direction and entire satisfaction of the Engineer in Charge. | 10.4 | Cum. | 23,680 ₹2,46,272 Lowest | 26,200 ₹2,72,480 |
| 4.00 | Providing and laying cement conctete 1:5:10 1cement: 5sand: 10graded stone agg. 40mm nominal size with 15% plum and curing complete excluding cost of form work in R/Wall/Brest walls the size of plum 150 to 300mm as per PWD specification. With in all leads and lifts as per the direction of the Engineer-in-charge | 27.55 | Cum | 23,600 ₹6,50,180 Lowest | 25,000 ₹6,88,750 |
| 5.00 | Providing and laying Stone/Boulder filling complete in all respect with in all leads and lifts as per direction of the Engineer in charge. | 7 | Cum | 15,899 ₹1,11,293 Lowest | 17,920 ₹1,25,440 |
| 6.00 | Random rubble masonary Polygonal rubble masonary (Uncoursed brought to courses with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12, 1Cement: 6 Sand: 12 Graded stone aggregate 20mm nominal size in Cement mortor 1:6, 1Cement: 6 Sand in breast walls and retaining walls within all leads and lifts as per direction of Engineer in Charge | 4.98 | Cum | 22,499 ₹1,12,045.02 Lowest | 24,550 ₹1,22,259 |
| 7.00 | Providing and laying cement concrete 1:3:6 (1: cement :3 sand :6 graded crushed stone agg. of 40mm. Nominal size and curing complete excluding the cost of form work in foundation and plinth with in all leads and lifts as per direction of the Engineer in charge. | 40.64 | cum | 24,199 ₹9,83,447.36 Lowest | 27,900 ₹11,33,856 |
| 8.00Providing and laying cement concrete 1:2:4, 1: cement :2 sand :4 graded crushed stone agg. of 20mm. Nominal size and curing complete excluding the cost of form work and rainforcement for reaiforce concrete work:- | |||||
| 8.10 | Wall any thickness but not less than 0.10 mtr. Thickness including attached pilasters buttersses, plinth and string courses etc, from top of foundation upto floor two level with in all leads and lifts as per direction of the Engineer in charge. | 20.56 | cum | 27,499 ₹5,65,379.44 Lowest | 27,900 ₹5,73,624 |
| 8.20 | Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge. | 0.48 | Cum. | 27,399 ₹13,151.52 Lowest | 27,950 ₹13,416 |
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
30 Jan 2026, 5:00 pmClosed
Executive Engineer Jal Shakti Division Chamba
Executive Engineer Jal Shakti Division Chamba
Remodelling of WSS Thundu Fargola in GP Kuthed, Gagla and Janghi in Tehsil and Distt.Chamba H.P
2026_HPIPH_126451_1
EE-JSV-CBA-2025-9667-9719 dated 22.01.2026
Open Tender
Civil Works - Water Works
Item Rate
540 days
Chamba
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,000
Executive Engineer Jal Shakti Division Chamba
₹1.6 L
11 May 2026
22 Jan 2026
31 Jan 2026
22 Jan 2026
30 Jan 2026
22 Jan 2026
Cutting in earth work in all kind of soil such as pick, jumper work blasting hard and soft rock chiseling soft or hard rock where blasting is prohibited and disposal of all ececavated earth work in all leads and lifts and to the entire satisfaction of the Engineer-in-charge.
Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited including dewatering in saturated soil and stacking the excavated earth/metarials upto all leads and lifts up to all lifts, not exceeding more than 3.0 mtr. clear from the edge of excavation and then returning the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts
Providing and laying cement concrete 1:4:8, 1:cement :4 sand:8 graded stone aggregate 40 mm nominal size and curing complete excluding cost of form work in foundation and plinth including carriage of material with in all leads and lifts, as per direction and entire satisfaction of the Engineer in Charge.
Providing and laying cement conctete 1:5:10 1cement: 5sand: 10graded stone agg. 40mm nominal size with 15% plum and curing complete excluding cost of form work in R/Wall/Brest walls the size of plum 150 to 300mm as per PWD specification. With in all leads and lifts as per the direction of the Engineer-in-charge
Providing and laying Stone/Boulder filling complete in all respect with in all leads and lifts as per direction of the Engineer in charge.
Random rubble masonary Polygonal rubble masonary (Uncoursed brought to courses with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12, 1Cement: 6 Sand: 12 Graded stone aggregate 20mm nominal size in Cement mortor 1:6, 1Cement: 6 Sand in breast walls and retaining walls within all leads and lifts as per direction of Engineer in Charge
Providing and laying cement concrete 1:3:6 (1: cement :3 sand :6 graded crushed stone agg. of 40mm. Nominal size and curing complete excluding the cost of form work in foundation and plinth with in all leads and lifts as per direction of the Engineer in charge.
Providing and laying cement concrete 1:2:4, 1: cement :2 sand :4 graded crushed stone agg. of 20mm. Nominal size and curing complete excluding the cost of form work and rainforcement for reaiforce concrete work:-
Wall any thickness but not less than 0.10 mtr. Thickness including attached pilasters buttersses, plinth and string courses etc, from top of foundation upto floor two level with in all leads and lifts as per direction of the Engineer in charge.
Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge.
Providing and laying cement concrete 1:1.5:3(1: cement :1.5 sand :3 graded crushed stone agg. of 20mm. Nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-
Foundation footing bases of column and the like mass concrete with in all leads and lifts as per direction of the Engineer-in-charge.
Wall ( any thickness but not less than 0.10 mtr. Thickness) including attached pilasters buttersses, plinth and string courses etc, from top of foundation upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge.
Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge.
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :-
Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.
In flat surfaces with steel plates such as soffits of suspended floors, roofs, landing and the like floor etc upto all thickness in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.
Providing and Placing of tor steel (reinforcement for RCC work) including bending,binding and placing in positioncomplete in all respect including all leads and lifts as per the direction and entire satisfaction of Engineer-in-Charge.
20mm thick cement plaster in double coat rough sides of bricks/ stone masonary for interior plastering up to floor two level including arrises internal rounded angles chamfers and/or including arrises rounded angles not exceeding 80mm in girth and finished even and smooth in cement morta 1:3 (1cement:3sand) with in all leads & lifts as per the direction of Engineer-in-Charge
White washing with lime on undecorated walls surface (two coats)to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts.
Providing Smooth finishing in cement motar 1:3 ( 1 cement 3 Sand ) as per the the direction of engineer in charge.
Providing and placing in horizontal layers Filtering media duly graded screened washed and cleaned as specified by the Engineer-in-charge.
Top layer Fine sand (Eff: size 0.20mm to 0.40 and Uniformity-co-efficient 2.00 to 3.00)
Second Layer : Coarse and 3mm-6mm
Third Layer:-Bajri 6mm to 20mm
Forth Layer:- 20mm to 25mm
Bottem Layer:- Broken stone 50mm to 75mm
Brick layer under bottom layer of filtter media
Providing and fixing MS Manhole cover 600x450mm with frame of MS angles 50x50x6mm and cover of black sheet 3.15mm thick complete with angles frames, flats etc.including locking arrangement.within all leads and lifts as per direction of the Engineer-in-charge.
Providing and fixing Sand Cast/ cast iron spun spigot and socket soil , waste and ventilating pipes ( lead caulked joints to be measured and paid for separately) 100mm dia nominal bore with in all leads and lifts as per the direction of Engineer in Charge.
Providing and fixing cast iron Cowl 100mm dia nominal bore with in all leads and lifts as per the direction of Engineer in charge.
Steel work welded in built-up section,trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of red lead paint in grating, framed guard bar, ladders, railing, brackets and similars work with in all leads and lifts as per the direction of Engineer-in Charge.
fixing galvinised steel barbed wire (IS-278-1962 type-I) weighting 9.38 Kgs./ 100 mtr and fixing to any type of stanared rails, straining bolt including securing with and p[oistion of GMS, staples or steel pins etc with in all leads and lifts as per the direction of Engineer-in-Charge. (GI Barbed wire will be supplied by the deptt. free of Cost.)
Steel work in single section including cutting, hoisting, fixing in position and applying a primining coat of red lead paint in R.S Joists, Channels,angles, tees
Providing and fixing Lock of superior quality with in al laeds and lifts as per the direction of Engineer in Charge.
Laying, Jointing in trenches galvanized mild steel tubes including fittings complete (earth work in trenches to be measured and paid for seperately as per the direction of the Engineer-in-charge with in all leads and lifts of the following nominal bores
50mm dia Nominal bore
40mm dia Nominal bore
32mm dia Nominal bore
25mm dia Nominal bore
Providing and Fixing Cast iron sluice valve with in all leads & lifts as per the direction of Engineer in Charge
50mm dia Nominal bore
Providing and Fixing wheel valve with in all leads & lifts as per the direction of Engineer in Charge
20mm dia Nominal bore
40mm dia Nominal bore
50mm dia Nominal bore
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.60 MB
form8.pdf
Tender Documents • 1.40 MB
BOQ_186427.xls
BOQ • 0.30 MB
condition.pdf
Additional Documents • 0.61 MB
form6.pdf
Tender Documents • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .