Construction of 4 No.Type-III and 10 Nos. Type-II qtr. at Women Police station Una Tehsil and Distt. Una (HP) (SH Building portion water supply and sanitary installation Rain water Harvesting tank septic Tank and Boundary wall etc) (Deposit work)

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm ( thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforcement and plain concrete work in foundation footing and bases of columns etcetera and mass concrete including carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm( three decimal fifteen millimetre ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give a fair finish including centering shuttering strutting and propping etc with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square rectangular or polygonal in plan in any height including carriage of materials within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness in all floor level including carriage of material entire within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give a fair finish including centering ,shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in:- beams cantilevers girders and lintels side and soffit of beams ,beam haunchings, cantilevers, bressumers and lintels in any depth and heights /thickness including carriage of materials within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give fair finish including centering ,shuttering ,strutting and propping etc with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work:- in edges of slabs and break in floors and walls etc. upto any width and height complete including carriage of materials within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge. The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre)size so as to give a fair finish including centering ,shuttering, strutting and propping etc with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing complete including carriage of materials within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government.