Supply, Erection Commissioning of Electric Panel Starter Transformer etc. to Pump House at outfall of Sahibi river Aurangabad Link Drain including all allied works in WS Mech. Sub Division No. 2 Jhajjar.

Supply of 415 volt, 1250 Amp, 3 Phase 50 Hz, Motor Control Centre L.T. Panel with main incomer and 6 no. outgoing feeder with Auto Transfer Starter Air/oil cooled Panel for operating, 3 No. 100 HP Motor, 3 No. 150 HP Motor fitted with suitable range ACB, MCCB, Air break Contactors, Micro controller based fault protecting devices/relays and other allied accessories complete in all respect with a stand of MS Channel/angle having 2 feet height from floor level & as per approved specification of deptt. (as per Annexure-C). The LT Panel should be complete with capacitor bank of 300 KVAR in 8 Steps with incomer consist of contactor & MCCB including earthing. Each step should consist of contactor & MCCB as per technical specifications approved by I & WR Deptt. Haryana as per Annexure-C.

Supply, Installation & Commissioning of 1000 KVA Transformer 11 KV/440V, Three phase Copper wound (i/c ACSR Conductor 50 Sqmm), GSL 85WG GI Nut & Bolts of sizes, eye screw bolt Wt. 0.483 Kg, earthing rod Wt. 6.175 Kg Gl pipe 40 mm dia 6 Mtr. Long earthing set B class, Gl strip 25x6 mm 9 Mtr. For earthing Wt. 10.80 Kg, lighting arrestor 9 KV, HT XLPE cable 3 C x95 Sq mm with TR, Termination Kit O/D 3 C x 95 Sq mm, Wooden Gutka Gl channel 100x50x6 mm 2200 mm for holding fuse board, LT fuse board with bus bar & aluminum patti, plinth structure including PCC pole 11 Mtr. Long with half clamp weight 1.47 kg. HVPN Drg. No. 2380, full clamp weight 2.325 Kg HVPH Drg. No. 2349, 11 KV polymeric pin with insulator, 11 KV polymeric disc insulator with fitting (T&C type), stay set 8 ft. long complete with X-plate 460 nn of angle 65x65x6 mm elbow rod Wt. 13.80 Kg., stay wire 7/8 SWG, Gi channel 100x50x6 mm 2200 mm for H-pole Wt. 21.032 Kg, Gl channel 50x50x6 mm 2400 mm for earth wire Wt. 10.80 Kg. Gl channel 75x40x6 mm 2200 mm for fuse unit Wt. 15.708 Kg, 100x50x5 mm 2200 mm for H-pole Wt. 21.032 Kg. 11 KV GO switch complete with handle, pipe & supporting channel with proper thumbing including construction of transformer platform, fencing & stone gravels & required safety signboards in switch yard area complete in all respect as per site condition including earthing & any other leftover items if any as per site requirement and specification approved by DHBVN Department) (All Type of Third party Inspections Charges e. Pre-Dispatch, Final Inspection, M&P, CEI inspection departmental Inspection, etc. during any state inclusive of rate.

Providing and Laying LT Armoured PVC Aluminium Cable of size 150 Sqmm 3 core with Aluminium thimbles at both end conforming to IS 7098-1985 as per approved makes.

Providing and Laying LT Armoured PVC Aluminium Cable of size 630 Sqmm 3.5 core with Aluminium thimbles at both end conforming to IS 7098-1985 as per approved makes.