REPAIR REPLACEMENT TO JOINERY, PLASTER, FLOORING, SANITARY FITTINGS, INTERNAL WATER SUPPLY OTHER MISC BLDG WKS AT RMS DHOLPUR

Amount

M&L for taking down cenment plaster of any description including racking out joints, hacking for kay scrubing down with water etc complete all as specified and as directed by Engineer in Charge

M&L for rendering 15 mm thick on stone masonary surfaces or surfaces other than fair face of brick work or on one side of lathing in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge

M&L rendering 5mm thick in cement mortar 1:3 finished even and smooth without using extra cement on ceilling surfaces complete all as specified and as directed by Engineer in Charge

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even on edges/ Chajjas/Roof projection and simlar courses etc.complete all as specified and as directed by Engineer in Charge

M&L preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 3 mm wall care putty on surfaces of wall complete all as specified and as directed by Engineer in Charge

M & L preparation of newly plastered surfaces and applying three coats of white wash in ceiling.complete all as specified and as directed by Engineer in Charge

M&L for 2 coats of cement base painting on newly plastered surfaces of wall over a coat of white wash incl preparation of surfaces.complete all as specified and as directed by Engineer in Charge

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer in Charge

M&L for providing circular raised plateform of height 20 cm below the water tanks and base 25 cm more than the external dia of tank for PVC cylindrical water tank of capacity 500 to 1000 ltrs using PCC1:2:4 type B1 using 20 mm graded stone aggregate with smooth finish including necessary form work complete all as specified and as directed by Engineer in Charge

S&F in repair rotational moulded plyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including locking arrangement for cover using MS flat 25x3mm and necessory fittings and iincl dismantliing complete all as specified and as directed by Engineer in Charge

S&F in repair rotational moulded plyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including locking arrangement for cover using MS flat 25x3mm and necessory fittingsand incl dismantling complete all as specified and as directed by Engineer in Charge

Takind down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed by Engineer in Charge

Takind down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed by Engineer in Charge

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors.complete all as specified and as directed by Engineer in Charge

S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors.complete all as specified and as directed by Engineer in Charge

S&F in repair Bib taps, cast copper alloy Chromium plated with crutch or butterfly handle, screwed for iron pipe of 15 mm bore or for brass ferrule and fixed.complete all as specified and as directed by Engineer in Charge

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed of 15 mm bore.complete all as specified and as directed by Engineer in Charge

S&F 15 mm size angular stop cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and as directed by Engineer in Charge

S&F in repair 15 mm size stop cock, cast copper alloy, chromium plated, fancy type with capstan head, with long shank and cup screwed both end for iron pipes complete all as specified and as directed by Engineer in Charge

S&F in repair 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.complete all as specified and as directed by Engineer in Charge

S&F stainless steel gratings of outer frame dia 150 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement.complete all as specified and as directed by Engineer in Charge

S&F Soap Dish Holder Code No AKP 35731P Make Jaquar or equivalent complete all as specified and as directed by Engineer in Charge

S & F in repair brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore complete all as specified and as directed by Engineer in Charge

S&F Hand Shower (health faucet) ABS chrome plated with 8mm dia 1meter long flexible tube and wall hook Code No ALD CHR 573 Make Jaquor or equivalent complete all as specified and as directed by Engineer in Charge

S&F in Repair Tubular towel rail, 20mmdia, D type, 60cm long between flanges.complete all as specified and as directed by Engineer in Charge

S&F in repair 15 mm bore Bib tap with long body any colour high pressure of PTMT screwed for iron pipe and fixed ( Min weight 15mm- 120 gms) complete all as specified and as directed by Engineer in Charge

S&F in repair 15 mm Angle stop valve of PTMT any colour pressure screwed for iron pipe and fixed bore Bib tap any colour high pressure of PTMT screwed for iron pipe and fixed ( Min weight 90 gms) complete all as specified and as directed by Engineer in Charge

S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs.complete all as specified and as directed by Engineer in Charge

S&F 32 mm bore waste coupling of PTMT(half or full thread) (Minimum weight 45 gms) fixed in repairs complete all as specified and as directed by Engineer in Charge

S&F 40 mm bore waste coupling of PTMT(half or full thread) (Minimum weight 45 gms) fixed in repairs complete all as specified and as directed by Engineer in Charge

S&F in repair 15 mm stop valve of PTMT any colour pressure screwed for iron pipe and fixed bore Bib tap any colour high pressure of PTMT screwed for iron pipe and fixed ( Min weight 90 gms) complete all as specified and as directed by Engineer in Charge

M&L PVC connection 15 mm size with PTMT nuts of length 450mm fixed in repairs complete all as specified and as directed by Engineer in Charge

S&F in repair vitreous china wash basin white, ovel type or flat back of size 580x 450mm including 32mm dia PVC waste pipe CP brass wast coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete all as specified and as directed by Engineer in Charge

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. Disconnecting existing tanks, exc 250 ltr not exc 1500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. complete all as specified and as directed by Engineer in Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.complete all as specified and as directed by Engineer in Charge

S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty in square n'exc 0.5 sqm in each pane complete all as specified and as directed by Engineer in Charge

Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engineer in Charge

Taking down chowkhats or frames exc. 1.5 sq. M but not exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engineer in Charge

Taking down shutters of any description n.exc. 1 sqm each and removing from the site complete all as specified & directed.

Description all as per Srl Item 39 here-in-above but exceeding 1 sqm and n.exc 2 sqm each complete all as specified & directed.

S&F in repair 18/19 mm thick prelaminated particle board, exterior grade, prelmainated one side with deocrative choice laminations & other side balancing white lamination, fixed with screws to timber frame work, fixed with beading as in pelmet box, cupboard shutter, kitchen cabinet etc complete all as specified & directed.

S&F in repairs fancy type brackets for 20mm dia curtain Rod decorative type complete all as specified & directed by Engr-in- Charge

S&F in repair curtain rod chromium plated 20 mm dia 1mm thick with fixing brackets, stops, rollers etc complete all as specified & directed.

Taking down door/window shutters easing & adjusting, refixing in same opening of any description not exc. 1 sqm each complete all as specified and as directed by Engineer in Charge

Description all as per Srl Item 44 here-in-above but exc 1 sqm and not exc 2 sqm each

S&F factory made solid panel PVC door shutters 30 mm thick (style) consisting of fram made out of MS tubes for top & bottom rails. MS fram shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS fram welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the fram at site as per specification & drawing.

S&F PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS squar tube , fixing in opening as per spesification & drawing complete all as specified and as directed by Engineer in Charge

S&F 2 nd class hardwood 35 mm thk glazed and skelton shutters, open rebated and prepare to receive glass, gauze,etc divided into squares with plain,chamfered or rounded,mitered and rebate sash bars, any number,edges of sash bars and framing moulded, fittted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR part-I section 8,clause 8.24(a) and fitted to chowkats

M&L 35 mm thick 2nd class hard wood plain framed panelled shutter (any panels) of factory made with lock rail and panel of 12 mm thick veneered particle board with commercial vace veneering on both faces including wooden beads on both sides, one coat of pink primer. The size of rail and stile as per IS-1003 part-I kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified and as directed by Engineer in Charge

S & F Mild 150 mm long mild steel tower bolts, stiove enamelled black, with bright bolt not less than 10 mm dia of shoot. complete all as specified and as directed by Engineer in Charge

S & F mild steel sliding door bolt 250mm long, plate type stove enamelled black, with bright bolt not less than 12 mm dia with and including a min of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and as directed by Engineer in Charge

S & F Mild steel pressed handles oval type size 150 mm , stove enamelled black complete all as specified and as directed by Engineer in Charge

S&F butt hinges medium grade cold rolled 100 mm mild steel and fixed complete all as specified and as directed by Engineer in Charge

S&F Continuous (piano) hinges, Mild steel, bright finished or electrogalvanised 40mm width of flaps complete all as specified and as directed by Engineer in Charge

S&F 150 mm long Aluminium anodised, berrel tower bolts of extruded section complete all as specified and as directed by Engineer in Charge

S&F 150 mm long aluminium handles, cast type, anodised complete all as specified and as directed by Engineer in Charge

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded. complete all as specified and as directed by Engineer in Charge

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded.

M&L for preparing surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide on new surfaces of steel or iron.

M & L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer in Charge

S&F in repair Mild steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer in Charge

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by Engineer in Charge

Taking down old Aluminium door shutters / partition including floor spring etc for replacement of glass pane / rubber gasket / aluminium glazing clip including adjustment of cleat for smooth functioning and refixing in same location complete all as directed. Note :- Glass Pane / rubber beeding / aluminium beeding will be measured and paid separately under subsequent items.

S&F in repair rubber beading for fixing of glass pane in aluminium frame complete all as specified and as directed by Engineer in Charge

Supply and fix in repair aluminium anodised glazing clip to the aluminium frame for securing glass pane complete all as specified and as directed by Engineer in Charge

S&F in repair 12 mm thick Prelaminated particle, board, exterior grade, prelmainated both side with decorative choice laminations , fixed to aluminium frame / shelf complete all as specified and directed.

Taking down old Aluminium window/ventilator shutters track / partition etc for replacement of glass pane / wire mesh/ aluminium glazing clip,rubber beading, roller including adjustment of cleat for smooth functioning and refixing in same location complete all as directed. Note :- Glass Pane/wire mesh / rubber beeding / aluminium beeding will be measured and paid separately under subsequent items.

S&F figured glass 4 mm thick pin headed type and glazing in squares n.exc 0.5 sqm in each pane all as specified complete all as specified & directed.

S & F in repair Vitreous China squatting pan, of ‘Orissa pattern ‘ white of size 580 X 440 mm, with integral foot rests and 'P' or 'S' trap including provision of cement concrete (1 cement, 2 sand or surkhi and 5 aggregate) bedding minimum 150 mm thick complete all as specified.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete.

S&F small fittings such as door & window cleats / stoppers and the like including all necessary labours, articles n. exec 200 cucm each in 2nd class hard wood complete all as specified & directed.

S&F door closer hydraulically regulated designation No 2, aluminium (Die cast) body, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg fixed & repair complete all as specified & directed.

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller & roller plate complete fixed to wooden chowkhat or welded to angle iron frame/chowkhats complete all as specified & directed.

Dismantling structural steel work including doors,gates but excluding framed truss etc complete all as specified and as directed by Engineer in Charge

S&F welded steel wire fabrics n exc 4Kg fitted to steel members complete all as specified and as directed by Engineer in Charge

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding,with and including either hooks,and hinges or steel hanging,door fittings (exclusive of steel sheeting or other covering,running rails and guides) and,hanging; also fastening and,fixing complete all as specified and as directed by Engineer in Charge

S&F in Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, doors chowkats of angle, ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165. complete all as specified and as directed by Engineer in Charge

S & F Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S & F 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints.

S&F in Repair 10 Liters PVC valveless, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S &F in repair Stainlees Steel plated rack of size 31" x 30" x 10" made out of 0.63mm thik SS Sheet Make-Blue Star Model No-BSKPR-314 complete all as specified and as directed by Engineer in Charge

S&F in repairs stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovre all size 915 x 460mm with bowlsize 410x330x160mm complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr as specified.

M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection including finished even and smooth without using extra cement and all as directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L Vitrified ceramic tiles 10mm thick (square /rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl. 15 mm thk screed bed in CM 1:4 complete all as specified and as directed by Engineer in Charge

Ditto same as above item No 87 but as in skirting/dado etc over 10mm thick CM 1:4 complete all as specified and as directed by Engineer in Charge

Non skid coloured ceramic tiles area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 sqm (300x300) 7 to 8 mm thick in floor/skirting set in neat cement slurry and pointed with coloured/white cement to match the surface over 15mm thick screed bed in C:M 1:6 complete all as specified and as directed by Engineer in Charge

Non skid coloured ceramic tiles area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm (600x600) 7 to 8 mm thick joint less in floor/skirting set in neat cement slurry and pointed with coloured/white cement to match the surface over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer in Charge

M & L Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 complete all as specified and as directed by Engineer in Charge

Dismantling of stone slabs and tiles of any description or thickness in floor,apron,roofs laid bedded and pointed in any mortar complete all as specified and as directed by Engineer in Charge

M&L 20 mm thick Granite (of any type/ any colour) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and as directed by Engineer in Charge

Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as spacified and directed. over 15mm thk screed bed in CM 1:4. complete all as specified and as directed by Engineer in Charge

Machine cut kota stone slab 20-25mm thick in,skirting, dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 10mm thick plaster in CM 1:3 complete all as specified.

Demolitiion of brick work/stone boulder masonary, built in cement mortar or cement lime mortar including all quions arches,pillars etc but excluding ashlar facings,dressed stone work and precast concrete but exceeding ashlar facingdressed stone work and precast concrete articles complete all as specified and as directed by Engineer in Charge

M&L for walling of random rubble, uncoursed well bonded bedded, and solidily hearted, built in cement mortar 1:6 complete all as specified and as directed by Engineer in Charge

M&L for walling of random rubble, uncoursed well bonded bedded, and solidily hearted, built in cement mortar 1:6.but except stone complete all as specified and as directed by Engineer in Charge

Extra over stone walling for hammer dressing to face stones and dressing,of face beds and joints, as specified, of random rubble walling uncoursed or brought up to courses with maximum depression on face from straight edge held against the dressed surface n. exc. 40 mm, on lime or sand stones. complete all as specified and as directed by Engineer in Charge

M&L Brick work with sub- class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed by Engineer in Charge

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of in cement mortar 1:4, finished even and smooth without using extra cement. complete all as specified and as directed by Engineer in Charge

Demolition of cement concrete (reinforced) roofs,floors (other than ground floor) ,beam,staircase,landings,chajjas and similar suspende work and removing unserviceable material exc 100 mtr as specified.(Reinforcemnet cut as required to facilitate demolition) complete all as specified and as directed by Engineer in Charge

S&F in repairs 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed.

M & L reinforced cement concrete 1:2:4 (20 mm graded aggregate) type B1 nominal mix as in slab supported on ;walls,beams and column in loor,roof,landings, balconies, canopies,deck slab or as in Shelves and chajjas complete all as specified and as directed by Engineer in Charge

M & L for mild steel 10mm dia, and over deformed bars cut to length bent to shape as required including cranking bending with MS steel wire not less than 0.9 mm dia complete all as specified and as directed by Engineer in Charge

All as per srf item No 106 here-in-before but 8 mm dia complete all as specified and as directed by Engineer in Charge

Use and waist for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or slopping) rough finished flat surfaces. complete all as specified and as directed by Engineer in Charge

M&L for plain cement concrete type B1 1:2:4 (20 mm graded aggregate) as in lintels upto 1.5 m clear sp and other similar bands, plinth courses, string courses,parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates, water troughs and the like including weathering, slightly rounded or chamfered anglesand throating, as directed including necessary formwork. complete all as specified and as directed by Engineer in Charge

Sethi Brothers

PD GUPTA AND COMPANY

M/S RISHI RAJ AGRAWAL