Loading
Loading…
Loading…
Tender Value
₹36.4 L
EMD Value
₹72,861
Closing Date
27 Jul 2026, 11:00 amDue tomorrow
Executive Engineer (E)
EE(E), PWD EMD (M-251) Ramesh Park Delhi
(SH-Restoration of Electrical System at Apsara Boarder, Mansarovar, Pratapkhand, Shyamlal collage underpasses in jurisdiction of sub division -3/M2533, Shahdara, Delhi.)
2026_PWD_294831_2
41/EE(E)/PWD NES ED/2026-27
Open Tender
Electrical Works
Percentage
30 days
M-2533
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹72,861
Yes
20 Jul 2026
20 Jul 2026
27 Jul 2026
20 Jul 2026
27 Jul 2026
20 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1S.I.T.C of following manually operated Oil immersed Star-Delta motor Starter with single contact heavy duty and cable entry box, oil tank capacity 6 Ltr. to 8 Ltr. with filled oil complete with SS enclosure and operation handle complete etc. as reqd. | |||||
| 1.1 | 40 HP | - | Each | - | - |
| 2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. Pro1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) | |||||
| 3Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||||
| 3.1 | Hot finished welded type tubes | - | Kg | - | - |
| 4Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required | |||||
| 4.1 | In gratings, frames, guard bar, ladder, railings, brackets,
gates and similar works | - | Kg | 1 | - |
| 5 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer onboth side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to
size and shape wherever required. | - | Sq.Mtr | 1 | - |
| 6Providing, fabricating, supplying, fixing and commissioning of sliding type wire mesh gate made out of suitable size M.S. frame with welded M.S. wire mesh, including guide channel, rollers, sliding arrangement, locking arrangement, handles, stopper, necessary nut-bolts, welding, cutting, grinding, primer coat and two coats of synthetic enamel paint complete as required at site. | |||||
| 7Fabrication, Supplying and installation of outdoor type cubical feeder pillar of size 1875mm x 1100mm x 300mm of M.S. sheet 2mm thick (14 SWG) duly compartmentalised having 5 strip busbars of 250amp capacity double door with two nos. godown locking arrangement for protection from rain, dust, duly fixed on M.S. angle iron frame work of size 40 mm X 40 mm X 6 mm (NS) 900 mm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement 2 sand :4 stone aggregate 20 mm) and having following accessories mounted inside the cubical panel i/c connection, inter connection with aluminum thimbles, earthing with two nos. earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as reqd. Supplying & Fixing of following accessories in the existing cubical panel board/feeder pillar including connection testing etc. as reqd. Size of panel is not less than 2.06 Sqmtr. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.15 MB
BOQ_393324.xls
BOQ • 0.31 MB
NITNO41rrecall.pdf
Tender Documents • 3.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].