Development of BRC Main Block with Service amenities Mamallapuram Chengalpattu District Tamilnadu

Amount

Earth work excavation in all kinds of soil (including soft soil, hard soil, gravel, moorum, and ordinary rock) for foundations, trenches, pits, basements, etc., including dressing of sides and ramming of bottom, stacking of serviceable material and disposal of surplus excavated material within a lead of 0.45 meters , including all labour, tools, equipment, transportation, and incidental works, etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and laying of Interlocking Paver Block Stone 60mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers.

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Crushed Stone Sand) to full depth of slab etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.

for plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.

Providing and laying in position, Standardised Concrete Mix M-30 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.

Foundation & Basement

Ground Floor

Terrace Floor

Supplying, fabricating and placing in position Epxy Coated Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.

Basement

Ground Floor

First Floor

TerraceFloor

Providing, Fabrication, erecting & fixing in position steel works as detailed and as directed at all levels using MS hollow section, squares etc. of various sizes and other structural steel sections conforming to IS 2062 including straightening, cutting, fabricating, welding, bending to shape, bolting, fixing in position, welding to insert plate, embedding in wall / concrete and finished the surface neat after grouting. Rate shall include for painting with two coats of dark grey colour synthetic enamel paint over a coat of zinc chromate primer, etc. complete as directed.

Post Tensioning Work: Design and execution of post tensioning work, including decoiling, the strands, cutting to the required lengths, supplying, laying of HT strands sheathing (GI corrugated ducts 0.3mm thick) jointing with couplers and inserting the strands, profiling, fixing liveend anchorages, including supply of stressing anchorages, suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of antibursting reinforcement, stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures with required tools, plants, and machineries, and consumables etc. (Shuttering, concreting & reinforcement steel shall be paid under respective items) at all heights including all leads, lifts, coordination, with the post- tensioning agency, preparation of drawings, obtaining approval from the Employer / Architect etc. Rate to include providing water, power, cement and admixture for grouting, packing of sheathing and anchorages blockings, filling of recess pockets after stressing using grouts (cement slurry mixed with approved admixtures) including providing access to post tensioning at all heights including all leads, lifts etc., all complete and as approved and as directed by the Employer Architect but excluding shuttering, concreting & reinforcement steel which shall be payable under respective items separately

Providing and Fixing of polyurethane foam for Sloped roof as thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span, whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free, high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K... 50mm (+38mm) thick PUF roof panel.

Brick work in Cement Mortar 1;5 (One Cement and five crushed stone Sand)using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-1/2" x 3" for foundation and basement including curing, etc., complete complying with standard specifiction.

Below Plinth Beam

Ground Floor

Terrace Floor

Brick partition walls of 11.50cm thickness using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. a)GROUND FLOOR

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of P sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/ screws. The rate including cost of all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of P sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer in charge.

Plastering 15 mm thick for external surfaces with Cement Mortar 1:5 (1 of cement : 5 of P sand) with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Applying the full putty using wall putty of approved quality over the new plastered wall surfaces and ceiling including scrapping, cleaning, applying putty and bringing the surfaces to a smooth of finish including necessary plaster of paris putty, wherever required etc.,complete complying with standard specification and as directed by the departmental officers

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing and fixing wooden false ceiling using approved quality seasoned hardwood sections for framework, spaced at suitable intervals, suspended from the main ceiling with adjustable mild steel hangers, anchor fasteners, and necessary hardware. Framework to be covered with 12 mm thick commercial plywood / MDF board / veneer-finished panel (as specified), fixed with countersunk screws, joints properly leveled, and finished smooth.

Supplying and fixing in position of 10mm thick Gyp board FALSE CEILING arrangements with aluminium anodised ' T' Section and 'L' angle frame work of grid size 60x60cm with aluminium T section and 'L' angel of size 25x25x2mm thick and the same issupported @ suitable intervals by adjustable type 6 mm dia MS rod with suitable threaded nuts suspended rods hung from ceiling at 120 cm c/c in both directions and fixing Gyp board in the Grid so as to give a seat to false ceiling including painting the 6mm dia MS rod etc.,complete complying with standard speifications. Necessary opening and arrangements for fixing electrical fitings should be provided with suitable frame work etc. complete complying with standard specification.

Supplying and fixing in position of 10mm thick Calcium silicate FALSE CEILING arrangements with aluminium anodised ' T' Section and 'L' angle frame work of grid size 60x60cm with aluminium T section and 'L' angel of size 25x25x2mm thick and the same issupported @ suitable intervals by adjustable type 6 mm dia MS rod with suitable threaded nuts suspended rods hung from ceiling at 120 cm c/c in both directions and fixing calcium silicate board in the Grid so as to give a seat to false ceiling including painting the 6mm dia MS rod etc.,complete complying with standard speifications. Necessary opening and arrangements for fixing electrical fitings should be provided with suitable frame work etc.ccomplete complying with standard specification.

Paving the floor with best approved quality fine polished Granite Stone Slabs of following size and Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)

Paving the floor with best quality vitrified Tiles of Kajaria Alfred Brown Satin - 60 x120 cm size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with Matte Finish vitrified Tiles of 1200 x 600 x 8 mm size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with vitrified Tiles of Double Charged 1200 x 600 x 8 mm size tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three crushed stone sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Supply and fixing II class Teak wood for frames 100x75mm size of door including all material and labour charges for teak wood wrought and put up in position and the size and section as per the architural drawings & Specification.

T.W. Scantlings below 2m in length

T.W. Scantlings over 2m to 3m

Supplying and fixing in position of 35mm thick Solid core flush shutters with Teak wood ply on both sides with teak wood lipping alround including cost and conveyance of all materials,Brass and ornamental furniture fittings including labour charges for fixing in position of door shutter etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (brown colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work"

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying, fabrication and fixing of 30mm thick both side pre laminated WPC door shutter with frame of required size 0.75m x 2.00m & 0.90 x 2.00m including necessary brass furniture fittings such as 125mm x 25mm brass hinges-3Nos , 200mm x 12mm brass tower bolt - 1No, 150mm x 12mm brass tower bolt - 2Nos,150mm brass handle - 2Nos, cylindrical lock - 1No, T.W lippings around the shutter etc., including cost, conveyance of all materials and labour charge for fixing complying with standard specification.

Providing & fixing one unit of the Magna-Maxim cubicle system comprising door of 700 mm width × 2340 mm high, divider panels overall height 2350 mm with top rail to reach 2425 mm, cubicle depth 1350 mm and width 1015 mm, panels of thickness 18 mm (doors) and 12 mm (dividers), all in aluminium extrusions finished in satin/matte silver-grey, complete with slide bolt lock with occupancy indicator, aluminium door stiffener, aluminium top rail with end-gap, divider top rail, aluminium coat hook, adjustable feet support, hidden fixings and all associated hardware and installation charges.

Supply and install one unit of urinal partition panel system (model UMP-A-1195) comprising 12 mm thick high-density compact laminate panel, overall height 1195 mm, fixed to wall and floor with aluminium/SS mounting hardware, finished in satin/matte colour (as per project standard), inclusive of panel, all supporting extrusions, fixings, clips, wall-brackets, caps, sealants, and installation to plumb, level and true; all labour, materials, transportation, adjustment and testing included.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete as per standard specification.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Supplying, laying and jointing CPVC pipes OF Standard Dimension Ratio 11 (Pressure class 1) conforming to IS:15778 - 2007 of approved quality and best variety of the following dia including cutting and fixing CPVC specials using CPVC adhesives (Solvent Cement) (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications and as directed by the departmental officers. (The CPVC pipes shall be got approved by Executive Engineer before use on works) - Internal water supply above ground level.

20mm Dia

25mm Dia

32mm Dia

Supplying CPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing PVC specials needs to be allowed

20mm Dia Coupler

25mm Dia Coupler

32mm Dia Coupler

20mm Dia Elbow

25mm Dia Elbow

32mm Dia Elbow

40mm Dia Elbow

20mm Dia Tee

25mm Dia Tee

32mm Dia Tee

40mm Dia Tee

20mm Dia Union

25mm Dia Union

32mm Dia Union

40mm Dia Union

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

Providing and fixing testing and commissioning of cast iron lever operated slim seal type butterfly valves of CI body and spheroidal graphite iron disc (SG iron),with nitrile rubber seal, tested to 10 kg / sq.cm Confirming to BS 5155 / MF6 standards and including a set of GI flanges as per BS-10 table 1 including bolt nuts and Neoprene rubber gaskets etc., Complete PN-16-Lehry make a)80mm Dia

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. (Make: KARTAR / EQUIVALENT)

Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

20mm dia

25mm dia

32mm dia

40mm dia

50mm dia

65mm dia

80mm dia

Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements.

20mm dia Coupler

25mm dia Coupler

32mm dia Coupler

40mm dia Coupler

50mm dia Coupler

65mm dia Coupler

80mm dia Coupler

20mm dia Elbow

25mm dia Elbow

32mm dia Elbow

40mm dia Elbow

50mm dia Elbow

65mm dia Elbow

80mm dia Elbow

20mm dia Tee

25mm dia Tee

32mm dia Tee

40mm dia Tee

50mm dia Tee

65mm dia Tee

80mm dia Tee

20mm dia Union

25mm dia Union

32mm dia Union

40mm dia Union

50mm dia Union

65mm dia Union

80mm dia Union

25 mm x 20 mm Dia REDUCER ELBOW

32 mm x 25 mm Dia REDUCER ELBOW

40 mm x 32 mm Dia REDUCER ELBOW

50 mm x 40 mm Dia REDUCER ELBOW

65 mm x 50 mm Dia REDUCER ELBOW

25 mm x 20 mm Dia REDUCER TEE

32 mm x 25 mm Dia REDUCER TEE

40 mm x 32 mm Dia REDUCER TEE

50 mm x 40 mm Dia REDUCER TEE

65 mm x 50 mm Dia REDUCER TEE

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing using PVC adhesives and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

32 mm dia

40 mm dia

50 mm dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

32mm Dia Coupler

40mm Dia Coupler

50mm Dia Coupler

32mm Dia Elbow

40mm Dia Elbow

50mm Dia Elbow

32mm Dia BEND

40mm Dia BEND

50mm Dia BEND

32mm Dia Tee

40mm Dia Tee

50mm Dia Tee

32mm x 40mm Reducer

50 mm x 40 mm Reducer

32mm x 40mm Reducer Elbow

50 mm x 40 mm Reducer Elbow

Supplying, fixing ,testing and commissioning of approved make SWR Type-B uPVC pipes self fit type confirming to IS 13592 ,6Kg/Sq Cm pressure rated including all fitting, like bends, tees, Elbows, Collars, Junctions, Inspection doors, Cowls, offsets access pipes jointing with rubber ring /solvent cement followed vy application of leak proof adhesive fixed on wall with properly fabricated GI bracket of suitable size ,GI U Clamp with bolts ,nuts and GI washers ,complete. Tee, Y-junction with or without door, Vent cowl, providing and fixing cleaning / rodding eye with endcap wherever required, etc., cutting the pipes, laying or fixing to perfect plumb, with slopes where required, making joints using solvent cement solution or with ring seal couplers of size available pipe of 110mm and 75mm dia., providing and fixing G.I. U clamps to the brackets, Providing and removing necessary scaffolding, fixing GI supports for pipes laid in false ceiling using G.I.hangers fixed to R.C.C slab including providing and fixing necessary anchor fastners and clamps, conducting water test for leak proof joints and the materials, cutting grooves to conceal the pipes, making holes in all surfaces, restoring the damaged portions with required materials, etc. complete.

75mm dia

110mm dia

160mm dia

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Providing 125mm dia. Core cutting up to 300mm deep in all types of concrete, restoring the same after laying pipe, providing waterproofing compounds for leak proof sealing, etc., complete and as directed by the site engineer.

Supplying PVC Gully Trap of 300 x 300mm size with 160mm dia outlet, making Pit excavation to a size of 750 x 750mm and 1000 to 1500mm depth, laying concrete with 1:4:8 mix cement concrete in bed and surround for 300mm wide and 300mm deep, constructing chamber with a size of 230 x 230mm using brick work 115mm thick in cement mortar 1:4 up to a height of 300mm above Gully Trap or up to 100mm above paving level, plastering with cement mortar 1:3 to 20mm thick finishing to smooth surface inside, plastering with cement mortar 1:4 outside, providing 150 x 150mm size cast iron grating, providing 32mm thick precast cement concrete cover slab, clearing the surplus material, earth etc. complete compying with standard specifications

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.

Internal size 600mm x 600mm up to 1M depth

Internal size 900mm x 900mm up to 1M to 1.5M depth

Internal size 900mm x 1200mm up to 1.5M to 2.5M depth

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Laying concrete with 1:4:8 mix using 20mm size stone jelly in bed for 300mm wide, 75mm all-round the pipes providing and removing temporary form work etc. complete compying with standard specifications

Providing Bed blocks of 300mm long 75mm thick and half the size of Pipe, using CC 1:2:4 mix, installing the bed blocks at every 1500mm intervals, providing 400 x 400 x 150mm thick plain concrete in 1:3:6 mix with 20mm stone jelly below bed block etc. complete compying with standard specifications

Constructing Grease Trap Chamber with internal size 1.0M x 2.0M up to depth of 1.5M to 2M including making earth work excavation to required size, providing 230mm thick concrete in 1:3:6 mix using 40mm stone jelly in foundation, providing 230mm thick brick work in CM 1:3 mix to 20mm thick plastering outside using CM 1:4 mix to 15mm thick, providing RCC slab over Chamber, providing 25mm to 75mm thick baffle wall with CC 1:2:4 mix fixing and removing shuttering for RCC work, using suitable steel in reinforcement, providing and fixing suitable size grating made of Stainless steel of 6mm dia SS Rod in verticals at 20mm centers, SS heavy quality Plate 6mm thick with perforated holes, SS Angles wherever required, Welding, fixing to walls, refilling the excavated earth, spreading the surplus earth with in the site etc. complete. Providing and fixing precast concrete fibre reinforced Manhole cover and frame, (SFRC) as per IS-12592 as directed by the site engineer. Internal size 600mm x 600mm - Heavy duty two number need to be to fixed. And manhole location need to be fixed Rungs are made up of Polypropylene rungs and conforming to ASTM -C 478 complete set.complete compying with standard specifications

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

110 mm dia

160 mm dia

110 x 110mm FRB Grating

160 x 160mm FRB Grating

Supplying, fixing ,testing and commissioning of approved make SWR Type-B uPVC pipes self fit type confirming to IS 13592 ,6Kg/Sq Cm pressure rated including all fitting, like bends, tees, Elbows, Collars, Junctions, Inspection doors, Cowls, offsets access pipes jointing with rubber ring /solvent cement followed vy application of leak proof adhesive fixed. .Exhavation for earth in building and outside of building and refilling for the same earth. in complete. location and routing as per site engineer incharge

110 mm dia

160 mm dia

Constructing Rain water Harvesting pit 600mm x 600mm up to 1200mm depth, laying 150mm thick cement concrete in foundation with 1:3:6 mix using 40mm size stone jelly, 230mm thick brick work using 75mm size stock bricks with CM 1:5, plastering to 20mm thick with CM 1:3 for interior surfaces to smooth finish, plastering 15mm thick with CM 1:4 to exterior surfaces, providing 150mm thick slab to required size with Steel in reinforcement, making suitable wooden form work, providing and fixing Cast Iron grating / perforated RCC slab with cover and frame, earth work excavation to required depth , Providing 75 dia slotted PVC pipe (3Nos) bore up to 3M depth, refilling the sides with excavated earth, chamber with metal filling, disposing of surplus earth as directed with in the site etc.complete compying with standard specifications

Supplying, fixing, testing, and commissioning of jaguar make white Under Counter Basin of Size:480x370x200mm Code: CNS-WHT-701 with a pair of cast iron brackets, including cost Waste Coupling 32mm Size Half Thread Wit Code: ALD-CHR-709, Jaquar make Prismatic Wall Mounted Basin Tap Code: PRS-CHR-061, Bottle Trap 250X190 10 Inches Product Code: ALD-769L 15mm brass nipple, 15mm dia nylon connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of paint over a priming coat of anti-corrosive paint including testing for leakages, etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be approved by the Executive Engineer before use on works).

Supply and fixing of Wash Basin Cabinet finished with granite counter top and BWP Ply with 1mm Laminate 4 as per design provided by architect complying with standard specification and as directed by the departmental officers.

Supply and Fixing of Bewelled Mirror with Ply Backing as per the design provided by the architect complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position Jaquar Rimless Blind Installation Wall hung WC Product Code: KUS-WHT-35953BIUFSM with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white Cement, Cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing of Jaquar make Single Piece Slim Concealed Cistern with Wall Mounting Frame, Installation Kit and “S-Type” Drain Pipe Connection Set for Wall Hung WCJaguar Product Code: JCS-WHT-2400WS with Jaquar Control Plate Kubix Jcp-Chr-352415 with a pair of CI brackets, and Hand Shower (Health Faucet)with 8mm Dia Product Code: ALD-CHR-577 and Jaquar make Toilet Roll Holder with Flap Product Code: ACN-CHR-1153S etc., complete with all fittings such as Angular Stop Cock with Wall Flange Product Code: FLR-CHR-5053N, union, coupling connected using 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including the cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc. complete complying with standard specifications.

Supply and fixing in position of Jaquar make white / color glazed earthenware Jaquar urinal and Ceramic waste Dome Product Code: URS-WHT-13253N and Auto Closing Concealed Urinal Flush Product Code: PRS-CHR-073 with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, with 15mm dia GI pipe of the required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masonry and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage, etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be approved by the Executive Engineer before use on works.)

Supplying and fixing approved Jaquar make single Towel Rail (Product Code: CPA-CHR-1111) 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing approved ANGLE VALVE WITH WALL FLANGE - STAINLESS STEEL for Washbasin and shower .,with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The shower should be got approved by the Executive Engineer before use on works).

Main LT Panel Design, manufacture, testing at works, transportation to site, unloading, storing, leading, erecting, testing & commissioning of MAIN BLOCK PANEL confirming to the technical specification for panels & comprising of the following: Incomer 250A TPN switch with HRC fuses as per SD Rates 648 Metering for Each Incomer: 1Nos - 96sqmm Digital Multi function meter (KWHr+KW+A+V+F+PF) - Ebrit multi meter 3 lines Seven segment display, 3 Phase 3 or 4 Wire CT-PT operated multifunction meter of class 0.5s accuracy with RS485 and THD for V & I, Size 96 x 96 sq. mm flush mounted. 1set - Current Transformers (Cast resin type) 250/5A, class 0.5, 10VARYB Indicator & MFM 1set - RGA LED type indication lamps for ON/OFF/Trip 1Set - Control MCB with Neutral link 1Set - Class B+C SPD with control MCB Bus bar: 100A TPN switch with HRC fuse as per SD Rates 153 63A TPN switch with HRC fuse as per SD Rates 150 32A TPN switch with HRC fuse as per SD Rates 148

Design, manufacture, testing at works, transportation to site, unloading, storing, leading, erecting, testing & commissioning of HVAC PANEL confirming to the technical specification for panels & comprising of the following: Incomer:1Nos - 200A,25KA, MCCB wth front drive kit Metering for Each Incomer:1Nos - 96sqmm Digital Multi function meter (KWHr+KW+A+V+F+PF) 1set - Current Transformers (Cast resin type) 200/5A, class 0.5, 10VA 1set - RYB LED type indication lamps for Phase 1set - RGA LED type indication lamps for ON/OFF/Trip 1Set - Control MCB with Neutral link 1Set - Class B+C SPD with control MCB Bus bar: 200A TPN 25kA Aluminium Busbar. If the busbar is painted with a non-mettallic matt finish paint with colour coded and SMC Bus bar supports. Current density of the bus bars shall not exceed 0.8A/sqmm. Outgoings: 8Nos -63A, TPN MCCB 2Nos -40A, TPN MCCB

Supply, installation, testing & commissioning of 8 Way horizontal / Vertical TPN 7 segment, double door Lighting distribution boards (LDB) conforming to the technical specifications for MCB DB's & comprising of the following. Incomer: 1No - 63A TPN MCB Phase control: 3Nos - 40A, 30mA DP ELCB Outgoings: 24Nos - 6/10A SP MCB

Supply, installation, testing & commissioning of 8Way horizontal / Vertical TPN 7segment, double door Power distribution boards (PDB) conforming to the technical specifications for MCB DB's & comprising of the following. Incomer: 1No - 63A TPN MCB Phase control: 3Nos - 40A, 100mA DP ELCB Outgoings: 24Nos - 6/16/20A SP MCB

Supply, installation, testing & commissioning of Double door Power distribution boards 12 WAY TPN VERTICAL DB conforming to the technical specifications for MCB DB's & comprising of the following. (KITCHEN.DB) Incomer: 1No - 125A TPN MCCB Outgoings: 3Nos - 63A TP MCB 4Nos - 40A TP MCB 5Nos - 25A TP MCB

Supply, Installation, Testing and Commisioining of Single phase, 12way MCB DB powder coated comprising of "C" curve MCB's for EL.DB. Incomer: 1No - 40A DP ELCB Outgoings: 8Nos - 6/10A SP MCB

Supply, installation, testing & commissioning of 8Way horizontal / Vertical TPN 7 segment, double door Power distribution boards (ACDB) conforming to the technical specifications for MCB DB's & comprising of the following. Incomer: 1No - 63A TPN MCB Phase control: 3Nos - 40A, 100mA DP ELCB Outgoings: 24Nos - 20A SP MCB

Supply, fixing, testing & commissioning of following rating MCB's in powdercoated sheet steel enclosure with all accessories & interconnections as required

63A 4P MCP WITH Sheet Steel Enclosure

40A 4P MCP WITH Sheet Steel Enclosure

Supply, fixing, testing & commissioning of following rating MCB's in Weather Proof enclosure with all accessories & interconnections as required

63 Amps 30 MA

40 Amps 30 MA

40A - FP MCB

40A - DP MCB

63A - TP MCB

Supply, fixing, testing & commissioning of following rating for 10HP Star delta starter with VFD in all acessories

Supply, fixing, testing & commissioning of following rating for 20HP Star delta starter with VFD in all acessories

Supply, laying, testing &commissioning of the following sizes of 1.1KV grade Aluminium / Copper Conductor armoured power cables on trays, ceilings, walls trenches, ground etc., with necessary clamps, cable ties, fasteners, identification tags, cable marking as required.

3-1/2 x 300 sq.mm. PVC armoured LTUG cable

3-1/2 x 250 sq.mm. PVC armoured LTUG cable

3-1/2 x 150 sq.mm. PVC armoured LTUG cable

3-1/2 x 70 sq.mm. PVC armoured LTUG cable

4 x 16 sq.mm. PVC copper armoured UG cable.

4 x 10 sq.mm. PVC copper armoured UG cable.

4 x 6 sq.mm. PVC copper armoured UG cable.

3 core 10sq.mm PVC copper armoured UG cable.

Supply & end termination of following AL/CU armoured power cables with necessary double compression brass glands, AL/CU. terminal sockets, insulation tapes, fasteners, earthing clips & connecting the clip to main earth bus with suitable bare copper wire complete accessories as required

3-1/2 x 300 sq.mm. PVC armoured LTUG cable

3-1/2 x 250 sq.mm. PVC armoured LTUG cable

3-1/2 x 150 sq.mm. PVC armoured LTUG cable

3-1/2 x 70 sq.mm. PVC armoured LTUG cable

4 x 16 sq.mm. PVC copper armoured UG cable.

4 x 10 sq.mm. PVC copper armoured UG cable.

4 x 6 sq.mm. PVC copper armoured UG cable.

3 core 10sq.mm PVC copper armoured UG cable.

Supply, laying, testing, and commissioning of a primary lighting point using 3 runs of 1.5 sq.mm PVC insulated FRLS multistrand copper conductor wires plus one run of 1.5 sq.mm copper earth wire, laid in concealed 25mm diameter rigid PVC conduit. The circuit shall be controlled by one (1) No. 6A one-way modular switch (Higher End) mounted flush in a GI modular box (1/2 Module) with a modular cover plate (1 Module, Plastic). The wiring shall terminate at a ceiling rose/junction box at the light point location. The scope includes all necessary PVC conduit accessories (bends, junction boxes), fixing hardware, pull wire, making good of all concealed portions (chasing and plastering), and testing.

Wiring with 3 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylem sheet covered TW switch box and 5A FT switch (One way) with continuous earth wire connection by 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed light point Looping upto 3 Meters.

Supply and run of 2 of 2.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories... with continuous earth wire connection of 1.5 sq.mm copper wire and making good..

Drawing wire in existing conduit / raceway 2x2.5 sq.mm PVC insulated single core unsheathed FRLS Copper Conductor of 1100 V grade... along with continuous earth wire connection of 1.5 sq.mm Copper wire

Supply and run of 2 of 2.5 sq.mm. PVC insulated... FRLS copper conductor... in suitable PVC rigid pipe concealed... with continuous earth wire connection of 1.5 sq.mm copper wire…

Supply and run of 2 of 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor... in suitable PVC rigid pipe concealed... with continuous earth wire connection of 2.5 sq.mm copper wire..

Wiring with 3 x 1.5 sq.mm FRLS copper cable in heavy gauge MS conduit concealed in wall/ceiling, MS accessories, flush MS switch box with Hylem cover, 5A FT two-way switch, 1.5 sq.mm copper earth wire, and making good the concealed portion. Includes junction boxes, bends, ceiling rose, etc., as per the detailed breakdown.

Supply, laying, testing, and commissioning of wiring for an exhaust fan point using 3 runs of 1.5 sq.mm PVC insulated FRLS multistrand copper conductor wires plus one run of 1.5 sq.mm copper earth wire, laid in surface-mounted heavy gauge MS conduit. The circuit shall originate from a standard switchboard location, including one (1) No. 6A one-way modular switch (Higher End) with cover plate in a GI modular box, and terminate near the exhaust fan location with one (1) No. 6A universal modular socket (Higher End) with cover plate in a GI modular box. The scope includes all necessary MS conduit accessories (junction boxes, bends, elbows, saddles), painting of conduit, fixing hardware, terminations, and testing.

Supply, laying, testing, and commissioning of wiring for a ceiling fan point using 3 runs of 1.5 sq.mm PVC insulated FRLS multistrand copper conductor wires plus one run of 1.5 sq.mm copper earth wire, laid in surface-mounted heavy gauge MS conduit. The circuit shall originate from the distribution board and be controlled by one (1) No. 6A one-way modular switch (Higher End) and one (1) No. step-type electronic fan regulator (2-Module, Higher End), mounted together on a 3-Module cover plate in a GI modular box. The wiring shall terminate at a ceiling rose near the fan mounting location. The scope includes all necessary MS conduit accessories (junction boxes, bends, elbows, saddles), painting of conduit, fixing hardware, terminations, and testing.

Supply and fixing of 6A 3 pin Universal socket with 6A 1W modular switch with module front plate (Plastic) suitable for 3 Module surface/flush mounting GI box (Concealed GI Box) - Higher End.

Supply and fixing of 6/16A Socket with 16A 1W modular switch with module front plate (Plastic) suitable for 3 Module surface/flush mounting GI box (Concealed GI Box) - Higher End.

Supply and fixing of a 25A Flush type Wall Socket integrated with a 25A DP (Double Pole) MCB (Miniature Circuit Breaker), specifically intended for AC Plug connections. The scope includes the supply of the combined unit and fixing it in position.

Supply, Installation, Testing and Commissioning of the RG6 TV outlet with modular front plate, and accessories as per the site conditions. Note:The front plate shall be different color for UPS & Raw power for identification.

Supply and laying of one run of RG-06 type coaxial TV cable within a 25mm diameter rigid PVC conduit, including conduit accessories (bends, junction boxes, saddles if surface-laid), pulling the cable, testing, and making good civil work

Supply and laying of one run of Category 6 (Cat-6) Unshielded Twisted Pair (UTP) networking cable within a 25mm diameter rigid PVC conduit, including conduit accessories (bends, junction boxes, saddles if surface-laid), pulling the cable, testing, and making good civil work

Supply, Erection, testing and commissioning of Atomberg Aris Starlight 1200 mm BLDC Ceiling Fan with IoT, Remote Control & Underlight LED with 3 Colour Options | Dark Teakwood and electronic type fan step regulator and fixing the same in the ceiling with necessary hardwares required as per the site condition.

Supply, Erection, testing and commissioning of Atomberg Efficio 250mm BLDC motor Energy Saving Exhaust Fan |White Exhaust Fan ith necessary hardwares required as per the site condition.

Supply, installation, testing, and commissioning of surface-mounted ceiling light fixtures, complete as required. The scope for each fixture shall be fully inclusive of the complete luminaire housing designed for direct mounting onto the ceiling surface, all necessary mounting arrangements, brackets, anchors, and fasteners suitable for the specified substrate, and the internal control gear (e.g., electronic driver or high-efficiency ballast). The fixture shall also include the specified high-efficiency light source (e.g., integrated LED module or high-efficiency FTL lamps). The cost shall be deemed to include the final electrical connection to the fixture and all other accessories, diffusers, and components necessary for a complete and operational installation.

Supply, fixing, testing & commissioning of ledlum LLS101 12W CREECOB Black 5000K or Equalant luminaire with all acessories

Supply, fixing, testing & commissioning of ledlum LLS122 12W BRIDGELUXCOB Black 5000K luminaire with all acessories

Supply, fixing, testing & commissioning of ledlum LLS068 12W Bridgelux Black 4000K luminaire with all acessories

Supply, fixing, testing & commissioning of ledlum LLS118 20W COB Black 5000K with all acessories

Supply, fixing, testing & commissioning of ledlum LLS026B 30W EPISTAR White 6000K with all acessories

Supply, installation, testing, and commissioning of suspended (hanging) light fixtures, complete as required. The scope for each fixture shall be fully inclusive of the complete luminaire housing, all specified high-efficiency light sources (e.g., integrated LED module or high-efficiency FTL lamps), and all internal control gear (e.g., electronic driver or ballast). The cost shall also include all necessary mounting arrangements, ceiling brackets, fasteners, and the complete suspension system, which may consist of GI down rods of the required height, ball and socket joints for leveling, and/or GI suspension chains, as specified for the location. The price shall be deemed to include the final electrical connection to the fixture and all other accessories necessary for a complete, secure, level, and operational installation.

Supply, fixing, testing & commissioning of Lamp : 1XE27 Size : D300MM X H1500MM with 9 Watt Bulb s Material : Resin luminaire with all acessories

Supply, fixing, testing & commissioning of Lamp : 1 *E27 Material : Metal, Finish : Black, Size : D210MM*H1600MM with 4 Watt Bulb Light fitting with all acessories

Supply, fixing, testing & commissioning of LAMP : 1XGU10 SIZE : W350MM X H1500MM MATERIAL : META and GU10 Bulb Suitable for this mode with all acessories

Supply, fixing, testing & commissioning ofWatts : 45W Beam Angle : 120º Powered by : HIPOWER LED EPISTAR Dimension : 1200*40*60 with all acessories

Supply, installation, testing, and commissioning of wall-mounted light fixtures, complete as required. The scope for each fixture shall be fully inclusive of the complete luminaire housing, designed for direct mounting onto a vertical wall surface, along with all specified high-efficiency light sources (e.g., integrated LED module or lamps) and internal control gear (e.g., electronic driver or ballast). The cost shall also include all necessary mounting hardware, such as back-plates, brackets, anchors, and fasteners suitable for the specified wall substrate. The price shall be deemed to include the final electrical connection from the existing wall wiring point and all other accessories, diffusers, or gaskets (if required for the rating) necessary for a secure, level, and fully operational installation.

Supply, fixing, testing & commissioning of Lamp : 1XE14 Size : W120MM X H310MM X D125MM Finish : Antique Brass Material : Metal + Glass with E14 candle bulb Light fitting with all acessories

Supply, fixing, testing & commissioning of Lamp : Led Size : W50MM X D60MM X H340MM Material : Metal + Acrylic with all acessories

Supply, installation, testing, and commissioning of a complete track light system, complete as required. The scope shall be fully inclusive of all track rails (surface-mounted or suspended as specified), track light fittings (spotlight heads), and all associated components. This includes the specified high-efficiency integrated LED modules and internal drivers within each fitting, all necessary power feed connectors (live ends), track joiners (straight, 'L', 'T', or 'X' connectors as per layout), and end caps. The cost shall also include all mounting arrangements, such as fasteners for direct ceiling mounting or a complete suspension kit (e.g., rods or wire) if specified, and all other accessories necessary for a secure, level, and fully operational track light installation

Supply, fixing, testing & commissioning of Track Length Black heavy with all acessories

Supply, fixing, testing & commissioning of Ledlum Product Id LLF157 20W Bridgelux Black 4000K with all acessories

Supply, fixing, testing & commissioning of Ledlam Product Id LLS107 10*1.5W Bridgelux Black 4000K with all acessories

Supply, installation, testing, and commissioning of recessed spotlight fixtures, complete as required, specifically for installation in a laminated false ceiling. The scope for each fixture shall be fully inclusive of the complete luminaire housing, trim, the specified high-efficiency light source (e.g., integrated LED module/COB), and the associated electronic driver. The price shall be deemed to include all necessary mounting arrangements suitable for this ceiling type, such as the retention mechanism (e.g., spring-loaded clips), and the precise cutting and finishing of the required cutout in the laminated ceiling panel. The cost shall also include the final electrical connection from the wiring point above the false ceiling to the driver, and all other accessories necessary for a secure, flush, and fully operational installation. Supply, fixing, testing & commissioning of 5 Watts Dimension : 65*100 Cut-out : 55MM IP Rating : IP20 Beam angle : 36 with all acessories

Earthing as per the ISI specification with an earth electrode of 3.0 metre Class 'B' CI pipe of dia not less than 100 mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. The pit shall be filled with alternate layers of salt & charcoal. The specification includes excavation, providing the electrode, filling with salt and charcoal, constructing the masonry inspection chamber, providing the RCC cover slab, and connecting clamps/fasteners.

Earthing as per the ISI specification with an earth electrode of Copper Plate of size 600mm x 600mm x 3.15mm buried in ground at a depth of 3.0 metre from ground level, placing in vertical position with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. The pit shall be filled with alternate layers of salt & charcoal. The specification includes excavation, providing the electrode, filling with salt and charcoal, constructing the masonry inspection chamber, providing the RCC cover slab, and necessary connections.

Supply and laying of 50mm x 6mm GI strip buried in earth at a depth of 0.50m below ground level including excavation, refilling etc. complete.

Supply and laying of 25mm x 6mm GI strip buried in earth at a depth of 0.50m below ground level including excavation, refilling etc. complete.

Supply and laying of 25mm x 3mm GI strip buried in earth at a depth of 0.50m below ground level including excavation, refilling etc. complete.

Supply and laying of 10 sq.mm. copper wire buried in earth at a depth of 0.50m below ground level including excavation, refilling etc. complete.

Supply and laying following sizes of 2mm Heavy duty PVC conduits in the floors, ceiling or through partitions with all accessories like bends, couplers, pullwire etc including cutting the flooring and making it good after installation

32mm PVC conduits

25mm PVC conduits

20mm PVC conduits

Supply and laying following sizes of 2mm Heavy duty MS conduits in the ceiling or through partitions with all accessories like bends, couplers, pullwire etc and making it good after installation

32mm MS conduits

25mm MS conduits

20mm MS conduits

Supply, installation, testing & commissioning of Conventional type Lightning protection system with complete set like Air termination, 8mm Aluminium rod, adhesion glude. cross connector, Metal roof conductor holder, down coductor, Test Joint, Stainless Steel Clamping, counter, mounting pole, test terminal box, earthing, earth pit, 10 mm copper bonded Round steel solid Conductor, If any necessary items is required etc as per the site condition shall be added. (Note: Refer enclosure drawing) (Conventional type)

Supply & installation of Galvanized cable rack system made of 2mm thick sheet steel folded with two longitudinal side rails connected by rungs at regular intervals of following sizes with necessary Tee's, Vertical/ Horizontal Bends, expansion anchor fasteners, coupler plates, coupling fasteners, including supply & grouting of supports as required at site. The supports should be painted with black enamel paint over a coat of anti corrosive primer. (Tray shall be measured along the central axis of the cable tray, 1000mm above sizes are fabricated by MS items)

Size of Cable Tray :450 mm x 50 mm

Size of Cable Tray :300 mm x 50 mm

Size of Cable Tray :150 mm x 50 mm

Supply, fabrication, installation, and painting of Mild Steel (MS) supports using channels, angles, and/or flat sections as required for mounting cable trays, panels, DBs, insert plates, etc. Fabrication shall include cutting, drilling, and welding as per approved drawings or site requirements. Installation shall include fixing supports securely to walls/floors/ceilings using appropriate anchor fasteners or grouting. All fabricated items shall be painted with two coats of approved black enamel paint over one coat of anti-corrosive metal primer.

Supply and placing of an electrical insulating Rubber Mat, 2mm thick, size 2m x 1m, suitable for 1100V grade applications, conforming to relevant IS standards (e.g., IS 15652), and bearing the ISI mark. The mat shall be anti-skid with a suitable pattern on the top surface.

Supply & fixing of First aid box of Thadani make containing full compliment of medicines, ointments & bandages etc.,

Supply & fixing of Shock Treatment chart in Tamil & English languages duly laminated/ glass framed

Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the Departmental Officers.

Supply & Fixing of A0 size colored As fitted Single line drawing duly laminated / framed in Utility electrical room

Supply & Fixing of Engraved phenolic (traffolyte) Name plate for Equipment identification for all Utility electrical room and Equipments

Supply and fixing of a modular RJ45 Data/Communication Outlet, comprising one (1) No. RJ45 keystone socket module (Higher End). The module shall be installed in one (1) No. 1/2 Module flush mounting Galvanized Iron (GI) box (Higher End) and finished with one (1) No. 1 Module modular front plate (plastic, Higher End). The scope includes supplying all components and fixing the assembly flush into the wall, including necessary screws and accessories. (Note: Excludes wiring run).

Supply and fixing of wireless modem and standard supported IEEE 802.11g/b and suitable WAN ports, ethernet speed and other features in supports access point mode and bridge mode, support WPS PBC/PIN,Qos

Supply, wiring (laying), testing, and commissioning of a coaxial cable point suitable for TV connection, including one run of RG-06 coaxial cable laid in surface or concealed PVC conduit (size typically 20mm or 25mm as required) from the distribution source/riser to the outlet location. The outlet shall terminate in a modular TV socket (F-connector type) mounted flush in a GI modular box with a modular cover plate. The scope includes all standard accessories such as conduit, bends, junction boxes, saddles (if surface), connectors, fixing hardware, and making good civil work (if concealed).

Supply, wiring (pulling through existing conduit/raceway), testing, and commissioning of Category 6 (Cat-6) Unshielded Twisted Pair (UTP) networking cable, including all standard accessories required for pulling and termination preparation (excluding end connectors/sockets).

Supply, installation, testing, and commissioning of a 3kVA online/offline inverter system (1 Phase Input / 1 Phase Output) complete with suitable rating SMF VRLA batteries to provide 1 Hour backup at full load. The scope includes supplying and fixing the inverter unit, battery bank, and a standard MS battery rack/stand with necessary inter-battery and inverter-to-battery wiring using appropriate size FRLS copper cables and lugs. All necessary mounting arrangements, structural steel supports (if required beyond standard rack), fixing hardware, and termination are included.

SITC of Ductable Type(Ceiling Hung) / Split Conditioners, comprising of indoor unit, outdoor units, isolating valves, thermostatic control, safety cutouts with Power Saver Scroll Compressors ,control / electrical panel, vibration isolators, necessary accessories, etc.

5.5 TR DUCTED UNIT

8.5 TR DUCTED UNIT

3.0 TR CASSETTE UNIT

1.0TR Split Unit

2.0TR Split Unit

Supply and Installation of hard drawn refrigerant pipes to be insulated with Nitrile Rubber sleeves and Supports (Various Size) 11/8 & 5/8 ; 7/8"&1/2"; 5/8"&3/8" 18 -G

Supply and Installation of Electrical transmission cable between IDU to ODU 4C x 6.0 Sqmm R

Supply and Installation of Electrical transmission cable between IDU to ODU 3C x2.5 Sqmm

Supply and Installation PVC 1'' dia pipes for the drain pipes with nitride rubber insulation

Lifting and Installation of Outdoor Units & IDU Installation of the indoor units Ribbed rubber pads for arresting

Canvas connection (100%fire proof canvas cloth) for arresting

Nitrogen Pressure testing, Vaccumizing and commissioning of the system for arresting

GI Ducting with Ms angle flanges as per IS standerd (supply&return) 24- G with 8mm supporting rod & SUPPORT ANGLE DUCTING SUPPORT

Aluminium powder coated grilles / diffusers – supply & return air SUPPORT

M.S. COLLAR DAMPER

Supply and charging of Refrigerant for A.C Unit

Acoustic insulation of 10 MM thick open cell stuck to the internal surface of ducts with recommended adhesive applied on the surface ducts

Thermal insulation of S.A. ducts outside duct 25mm.XLPE Aluminium Foil nitrile rubber insulation with Log Coating class "O" stuck with adhesive SR998.

Supply of SS304 Grade Batter table with top 20swg and bottom 22swg with size:18"x30"x34"

Supply of SS304 Grade Rolling table with Granite Top and with TB shelves Black splash with size:48"x24"x34"+6"

Supply of SS304 Grade Dosa Hot plate with drain facility Fabricated with SS304 Grade sheet JSW 12mm MS plate on top size 5'x30"x34"+6

Supply of SS Chinese Range with stock pot and Drain facility with Overall size :60"x30"x30"+18"

Supply of SS304 Grade Masala table with TB shelves,12 containers capacity with size: 24"x24"x34"

Supply of SS Indian Double burner range with Drip tray and bottom plain shelf with overall Size :48"x24"30"

Supply of SS304 Single sink unit top 20swg and bottom 22swg with size : 24"x24"x34"+6"

Supply of SS Single Burner Bulk cooking range with MS Frame support and with canteen burner and Heavy cast grid with Overall Size: 30"x30"18"

Supply of SS Single Burner range with MS Frame support and with G10 burner and Square cast grid with Overall Size: 24"x24"24"

Supply of SS304 Grade Work table with TMB shelves,3 sides splash back with size: 48"x24"x34"+6

Supply of SS304 Grade Parcel counter with TB shelves with 2 OHS, 3 sides sheet covering ,3 sides backsplash with size: 48"x24"x34"+18"+12"

Supply of SS304 Juice counter with sink on LHS,3 side sheet covering ,3 sides splash back,2 Over head shelves with overall size : 48"x24"x34"+6" and sink size :18"x18"

Supply of SS304 Grade 4 Tier rack with size: 48"x18"x60

Supply of HOSHIZAKI 2 Door verticle chiller

Supply of HOSHIZAKI 2 Door verticle Freezer

Supply of WESTERN Deep freezer 300ltrs

Supply of 3 Door HOSHIZAKI under counter chiller

Supply of Western make Single door Visicooler

Supply of SS304 Work table with sink on LHS with size: 48"x24"x34"+6"

Supply and VEG CUTTING MACHINETable top veg cutting machine table top, 7 blade cutting capacity (eg., 150-250 Kg/hr), motor power (e.g, 0.5 HP TO 1 HP),machine dimensions and weight (eg.,45-50 Kg),body material (typically Stainless Steel), and cutting capabilities like slice, dice, and shred, often with interchangeable blades for different shapes and thicknesses.

Supply and fixing Tilting wet Grinder 10 ltrs

Supply and fixing Box Type wet grinder 10 ltrs

Supply and fixing Sujatha Blender

Supply of SS 304 Grade 3 sink unit overall size 72"x24"x34"+6"

Supply of SS304 Grade Chute table with overall size : 48"x24"x34

Supply of SS Rack 5 tier overall size: 48"x18"x60"

Supply of SS 304 Grade 3 tier pot rack with overall size: 48"x24"x60

Providing and constructing planter boxes of approved size, profile, and design as per architectural drawings, using brick masonry in cement mortar (1:4) / RCC framework as specified. The internal surfaces shall be rendered with 12mm thick waterproof cement plaster (1:3) mixed with an approved integral waterproofing compound to ensure watertightness. The inside faces shall be finished with two coats of cement-based waterproof paint or protective acrylic coating to prevent moisture penetration.

Providing and applying texture finish to walls (interior/exterior) using approved texture material of, including surface preparation, base coat, and final texture coat

Supply and fixing of Bar Seater as per approved by architect. (Including Cushion & Fabric)

Supply and fixing of Reception Table as perapproved by architect.

Supply and fixing of Bar Counter as per approved by architect.

Supply and fixing of Toilet Storage Unit as per approved by architect.

Supply and fixing of Wooden Louver as per design approved by architect.

Supply and fixing ofMotif Panel Cnc Wall panelling with 19mm HDF as per design approved by architect.

supply of the Halifax Fabric 1-Seater Sofa in Beige, adhering to the manufacturer's exact dimensions of 89 cm Depth x 98 cm Width x 89 cm Height, with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

supply of the Halifax Fabric 2-Seater Sofa in Beige, adhering to the manufacturer's exact dimensions of 156cm Depth x 89 cm Width x 89 cm Height, with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

Supply of the Herman Faux Marble Top Coffee Table - Grey of Size 131 cm x 75 cm x 36 cm with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

supply of the Hadley Ceramic Top End Table - Walnut Side Table - Grey of Size 45 cm x 45 cm x 40 cm with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

Supply of the Nismaaya Hobson Dining Table - White Oak wood 218 cm x 110 cm x 76 cm, Oak Wood Teak Finish with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

supply of the Nismaaya Ervin Mango Wood Chair Dining Chair- Teak Wood 58 cm x 64 cm x 84 cm, Oak Wood Teak Finish with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

supply of the Nismaaya Gabe White Oak Round Dining Table - Teak Wood 102 cm x 102 cm x 76 cm, Oak Wood Teak Finish with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

supply of the Nismaaya Macy Rattan Arm Chair Dining Chair- Teak Wood 58 cm x 64 cm x 84 cm, Oak Wood Teak Finish with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

supply of the Boston Solid Wood Rattan Cane Dining Table four Seater - Brown Finish 131 cm x 90 cm x 76 cm, Oak Wood Teak Finish with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

Supply of the Muse Sheesham Wood Arm Chair - Maple Finish 57 cm x 64 cm x 83 cm, with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

Supply of the Vangaurd Bar Chair - Brown 44 cm x 52 cm x 85 cm with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

Supply of the Nismaaya Wild Trunk Acacia Wood Dining Table with Skid Frame 57 cm x 64 cm x 83 cm, with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

Supply of the Bena Teak Wood Dining Chair Chair - Brown 44 cm x 52 cm x 85 cm with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

Supply of the ‘Nexa’ 6 Feet Office Desk In Pari Walnut and Advanced Gray with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

supply of the ‘Orion’ Linear Workstation In Pear Wood & Meteor Gray Finish with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

supply of the‘Maxima’ 12 Feet Meeting Table in Felix Walnut & Leather Finish with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

supply of the‘Streak’ High Back Chair In Light Gray Frame with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

supply of the‘Clove’ High Back Office Chair In Light Gray Frame with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

supply of the‘Spirit’ Black Medium Back Mesh Office Chair In Gray Frame with a minimum 2-Year Comprehensive Manufacturer's Warranty and delivery of new, fully assembled units.

Supplying and Planting of Swietenia macrophylla tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Terminalia arjuna tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Mimusops elengi tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed bythe site in-charge.

Supplying and Planting of Terminalia catappa tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Bauhinia purpurea tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Ficus bengalenisis tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Nerium oleander dwarf foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Murraya exotica foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Bougainvilla assorted (Multicolour) foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Tabernum varigated foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Tecoma goudi choudi foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge

GST at 18%

BHAKIYA ASSOCIATES (BID ID -1546962)