Carrying out painting civil renovation and minor electrical works at old RCMA building I Floor in HAL factory

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II

Removing carefully old fully glazed MS windows / ventilators of size 3.0sqm below including frames, glazed shutters,MS grills,etcfrom plastered brick wall by cutting the holdfasts,making good and stacking serviceable materials within 500 metres lead with rate including hire charges for labour,tools,etc all as specified and directed by EIC.

Removing old sanitary fittings like Commodes with flush tanks, etc of any size and desription and handing over the useful material to stores with rate including hire charges for labours,tools,etc,all as specified and directed by EIC

Providing and constructing brick work with best locally available flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in CM 1:6 for walls for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, including cost of all materials,labour,taxes, curing etc., complete as specified and directed by EIC.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone ggregate 20 mm nominal size derived from natural sources) all as specified and directed by EIC.

Supply & fixing single piece Western water closet having Dual cistern of JAQUAR or equivalent product from other makes including cost of all materials,labour charges for fixing,etc all as specified and directed by EIC.

Supplying & stacking carefully 15mm dia CP 2 in 1 Bibcock with flange of Model No: 8312 of PRAYAG make or equivalent product from ESSESS/JAQUAR/PARRYWARE/PLUMBER make along with rubber washers with rate including cost of all materials,transportation,etc all as approved /specified and directed by EIC.

Supplying & stacking carefully CP health faucet with 1.00 metre tube and Hook of CAT No. BEA-81 of PRAYAG make or equivalent product from ESSESS /JAQUAR/ PARRYWARE/PLUMBER make with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Preparatory work on new walls/ceilings, etc. including cornices, pilasters by sand papering, dusting, brooming, scrapping, washing, rubbing down wherever necessary and Supplying & applying Two coats of acrylic emulsion paint of interior grade having VOC content less than 50 grams/litre of approved shade in Asian Paints make or equivalent product as approved, supplying & applying one coat of water thinnable cement primer having VOC content less than 50 grams/litre from Asian Paints make or equivalent product as approved including removal of unwanted nails, clamps,etc and filling the gaps, cracks,etc with wall putty of Asian Paints or equivalent product as approved with rate including cost of all materials, labour,tools, scaffolding, wastage, etc complete all as approved, specified and directed by EIC.Contractor should ensure all safety measures if work is carried out at heights at his own cost.(Co-efficient / multiplication factor shall be applied as per DSR 2023)

Disposal of building rubbish / malba / similar unserviceable, dismantled material like structural steel or waste materials by mechanical means, including loading,transporting, unloading to specified location,beyond 50 m initial lead, for all leads (within HAL premises) including lifts involved,vehicle,labour,fuel charges,driver etc complete all as specified and as directed by EIC.

Supply & Fixing of 3 phase Multifuntion Energy recording Meter with CT Coils & Wiring for Existing LT Panel with necessary fixing accessories as per site & inter-connection complete Make: Secure

Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

The payment terms shall be governed as per the terms indicated in General conditions of contract.

Amount towards GST will be paid along with RAR payment against invoice.

The tenderers are requested to abide by the rules of prevailing GST act.

This BOQ specification has to be read in conjunction with technical specifications and tender drawings if any. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.