ADDN ALTN AND SPECIAL REPAIRS OF MD ACCN GRADE III AND IV BLDGS UNDER GE WEST COLABA MUMBAI

Amount

Providing and erecting horizontal industrial safety net as per IS 11057: 1985, made out of polypropylene rope as per IS 5175: 1992, mesh size 75 mm X 75 mm, border cord 12 mm, tie cord 12 mm, mesh cord 4 mm including overlay with HDPE net to catch personnel and debris and keeping the same during the period of work and including dismantling and taking away after completion of the work complete all as specified and as directed by Engr-in-Charge.

Providing and erecting vertical scaffOld unserviceableing net (debris net), made out of high density polyethylene for dust and debris control and keeping the same during the period of work and including dismantling and taking away after completion of the work complete all as specified and as directed by Engr-in-Charge.

Providing, erecting and subsequently dismantling temporary GI sheet /plywood portions with 2.00 metre high fixed on bamboos/wooden post etc. within the premises so as to isolate the living area from working area and taking away all materials complete all as specified and as directed by Engr-in-Charge.

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 25 mm average depth including saw-cutting of all edges making square shoulders of the cavities complete all as specified and as directed by Engr-in-Charge. (All loose unsound and cracked concrete shall be removed out side MD land) (Note: thickness will be measured excluding plaster)

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 40 mm average depth including saw-cutting of all edges making square shoulders of the cavities complete all as specified and as directed by Engr-in-Charge. (All loose unsound and cracked concrete shall be removed out side MD land) (Note: thickness will be measured excluding plaster)

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 60 mm average depth including saw-cutting of all edges making square shoulders of the cavities complete all as specified and as directed by Engr-in-Charge. (All loose unsound and cracked concrete shall be removed out side MD land) (Note: thickness will be measured excluding plaster)

Cleaning loose concrete, if any, all around reinforcement including from behind the reinforcing bars to give an average 10 mm thick (but not less than 10 mm clear air gap) and cleaning reinforcement of total rust using alkaline rust remover with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washed with water and allowing it to dry and Applying two coats of epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ Krishna Conchem) as approved by the Engineer-in-Charge, with mixing and applying SBR latex modified cementitious bond coat using cement 2.2 kg per square metre on prepared concrete surfaces of parent material as approved by Engr-in-Charge for old and new reinforcement of any dia complete all as specified and as directed by Engr-in-Charge. Make- SBR latex from FOSROC/SIKA/Dr Fixit / BASF as approved by the Engineer-in-Charge

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and Old unserviceable of any height complete all as specified and as directed by Engr-in-Charge.

M & L for mild steel TMT bars 6 to 10 dia as in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

M & L for plastering 20-25mm thick (Avg) Polymer modified cement mortar in two coats, 15mm base coat and subsequent finishing coat with and including curing as per manufacturer's instruction complete all as specified and as directed by Engr-in-Charge. Make- Dr Fixit Repair Pro Polymer Mortar, FOSROC-RENDOROC S2-structural grade Polymer Mortar, Shalifix FRM Polymer Modified Fibre Reinforced Mortar of STP or equivalent as approved by the Engineer-in-Charge

Providing and placing in position micro-concrete, grade M40, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 75 mm complete all as specified and as directed by the Engineer in charge (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)

Providing and placing in position micro-concrete, grade M40, modified with aggregate which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section more than 75 mm complete all as specified and as directed by the Engineer in charge (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)

M & L for RCC works as in columns, foundations, beams, slabs, parapet, staircase etc. in M30 (Design Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed by Engr-in-Charge.

Providing and fixing special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form from all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies etc. complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on brick or stone/concrete surfaces, etc. on internal/external surface of wall/ceiling including raking out joints, hacking for key, scrubbing down with water to receive plaster and removing debris out side MD land and M & L for 15-25mm thick Ready Mix Plaster in multi layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, (upto four storeys of bldgs) including use of steel scaffOld unserviceableing complete all as specified and as directed by Engr-in-Charge. Note :- Liquid water proofing compound will be measured and paid seperately as supply only

All as per item No 15 above but from Portion of building from five to eight storeys,

All as per item No 15 above but from Portion of building from nine to fourteen storeys,

Supply only liquid water proofing compound. Make - Plastocrete of Sika/Pidiproof LW of Pidilite.

Taking down cement plaster on brick or stone/concrete surfaces, etc. on internal/external surface of wall/ceiling including raking out joints, hacking for key, scrubbing down with water to receive plaster and removing debris out side MD land and M & L for 12 mm thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces(internal surface) and finished even & smooth without using extra cement ccomplete all as specified and as directed by Engr-in-Charge. Name of Manufacturer: M/s ACC accopalst/CK Birla Aerocon/Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M & L for Old unserviceable loose spalled concrete, chiseled from roof ceiling with the help of scrapers, chisel & hammer, cleaning of rust from mild steel rod, applying cement slurry spray 3.00 kg per sqm by paint brush over cleaned surface and thereafter rendering 20-50mm Thick ready mix plaster in multi layer for ceiling on brick wall or concrete surfaces including making groove of appropriate size and finished even & smooth without using extra cement including three coat of white wash complete all as specified and as directed by Engr-in-Charge. Name of Manufacturer: M/s ACC accopalst/CK Birla Aerocon/Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M & L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of Anti-fungal, Dust resistant, Water repellant, Crack-bridging, weather proof type (Ist quality), Exterior Acrylic Emulsion paint (100% Acrylic) Base coat of Apex ultima of Asian Paints, protek duralife and top coat of Apex Ultima protek, over a coat of "Trucare" exterior wall primer, through authorized applicator only including use of steel scaffOld unserviceableings upto 04 story of Bldg omplete all as specified and as directed by Engr-in-Charge. Make: Asian Paints Ultima Protek or equivalent of Berger Paints ( Weather Coat All Guard) / Nerolac (Excel Top Guard) / Dulux Paints ( Dulux Weather shield Max) as approved by GE.

All as per item No 21 above but from Portion of building from five to eight storeys,

All as per item No 21 above but from Portion of building from nine to fourteen storeys,

M & L for preparation of newly plastered surfaces & applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall care putty including rubbing with sand paper through authorised applicator of paint manufactures only of approved shade complete all as specified and as directed by Engr-in-Charge

M & L for preparation of plastered surfaces of wall including complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall care putty including rubbing with sand paper through authorised applicator only of paint manufactures only of approved shade complete all as specified and as directed by Engr-in-Charge. Make for Item No. 24 & 25:-"Tractor Uno" of Asian paint/'Jadoo' of Berger paint/ Nerolac beauty of Nerolac paint as approved by GE

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engr-in-Charge.

M & L for dark shade, double/ultra charged vitrified tiles, first quality, conforming to IS-13006/EN/176 group B1a, 8, to 10mm thick, (square/ rectangular) polished, area of each tiles not exc exceeding 0.36 Sqm , in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge

M & L for dark shade, double/ultra charged vitrified tiles, first quality, conforming to IS-13006/EN/176 group B1a, 8 to 10mm thick, (square/ rectangular) polished, area of each tiles not exc exceeding 0.36 Sqm , on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including backing coat 10 mm in CM (1:4) complete all as specified and as directed by Engr-in-Charge.

M & L for non skid coloured ceramic tiles, joint free, conforming to IS-13755, group B II(b) , 1st & premium quality, Digital coloured ceramic tiles, 300mm x 300mm x 6-7 mm thick in floors, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) complete all as specified and as directed by Engr-in-Charge.

M & L for non skid coloured ceramic tiles conforming to IS-13755, group B II(b) , 1st & premium quality, Digital coloured ceramic tiles, 600mm x 600mm x 7-8mm thick in floors, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) complete all as specified and as directed by Engr-in-Charge.

M & L for non skid coloured ceramic tiles conforming to IS-13755, group B III , 1st & premium quality, Digital coloured ceramic tiles, 600mm x 600mm x 7-8mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates).

M & L for glazed coloured ceramic tiles conforming to IS-13755, group B III , 1st & premium quality, Digital coloured ceramic tiles, 600mm x 300mm or 405mm x 250mm x 6-7mm thick in vertical surfaces (including designed borders ) such as skirting and dados, set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and as directed by Engr-in-Charge Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates). Make for Item No. 27 to 32: M/s H R Johnson/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles

Demolition of stone slabs and tiles of any description or thickness laid in floors, aprons etc, laid, bedded and pointed in any mortar and and removing the rubbish outside MD land complete all as specified and as directed by Engr-in-Charge

M & L for machine cut kota stone slab flooring 20-25 mm thick, over cement screed base laid 15 mm thick in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified and as directed by Engr-in-Charge

M & L for machine cut Kota stone slab flooring, 18-20 mm thick, in one piece as in vertical surfaces, skirting etc, set and jointed in neat cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and pointed in colour cement to match including backing coat 10 mm in CM (1:3) complete all as specified and as directed by Engr-in-Charge.

M & L for Granite tiles (of any type and colour) , 20mm thick machine cut, set, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including screed bed in cement plaster 20 mm thick 1:4, as in kitchen platform, jamb/cill of window, ventilator, border, flooring and simillar work etc complete all as specified and as directed by Engineer-in-Charge.

M & L for machine cut cuddapa stone slabs 20-25 mm thick, over and including 15 mm thick screed bed in cement mortar (1:6) or rendering coat of 10mm thick in CM 1:4 and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing, polishing & rounding of edge on one side of the slab, cutting hole complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs steel water tubing of size 15mm bore, medium grade, galvanised iron with all Fittings such as Tees, elbows, sockets, bends, unions, shortpieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239, fixed to wall and ceiling or laid in floors and making good disturbed surfaces to match the existing surfaces complete all as specified and as directed by Engr-in-Charge. Make- (a) Tata (b) Swastik (c) Jindal (d) Surya (e) Prakash (f) Indian Tube Company (g) Zenith (h) BST (j) GST (Gujrat Steel Tube)

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good ,cutting n, exc. 10cm girth complete all as specified and as directed by Engr-in-Charge.

S & F in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm), including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc and screwed with brass screws to sheesham wood plugs embedded in floor complete all as specified and directed by Engineer-in-Charge.

S & F wash basins, vitreous china, white, flat back, size 580 mm X 450 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and directed by Engineer-in-Charge. Make for Item no 40 & 41: Neycer Kermag (Standard)/Hindustan Sanitary Ware Industries (Ist Quality)/Parryware (Super Fine)/Cera(Ist Quality)/Jaquar

S & F in repairs 10 litres capacity, low level, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed by Engr-in-Charge. Make:Commander/ Hindware/ Paryware/ CERA.

S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 204 or Equivalent of JAQUAR/PARKO/PRAYAG

S & F in repair 15 mm bore, fancy type, concealed stop cock (regular body) cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 206 or Equivalent of JAQUAR/PARKO/PRAYAG

S&F PVC connection, 15mm size, PTMT nuts of length 450 mm complete all as specified and as directed by Engr-in-Charge.

S & F in repair 15 mm bore, fancy type, bib taps, long body (two in one) cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 202B or Equivalent of JAQUAR/PARKO/PRAYAG

S & F in repair brass chromium plated ,15 mm bore, fancy type, sink cock( wall mounted) with 150mm long swell spout, wall flange and provision of WP connection, cast copper alloy with fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA /JAQUAR/PARKO/PRAYAG

S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 202B or Equivalent of JAQUAR/PARKO/PRAYAG

S & F in repair for 15 mm bore, fancy type, wall mixer with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 216 or Equivalent of JAQUAR/PARKO/PRAYAG

S & F in repair 15 mm bore, fancy type, health faucet with SS hose complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 232D or Equivalent of JAQUAR/PARKO/PRAYAG

S & F in repair fancy type, CP, Towel Rail, 61 cm long complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 412 or Equivalent of JAQUAR/PARKO/PRAYAG

S & F in repair CP Towel Ring complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 413 or Equivalent of JAQUAR/PARKO/PRAYAG

S & F in repair CP, soap dish complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 414 or Equivalent of JAQUAR/PARKO/PRAYAG

S & F in repair CP toilet paper hold unserviceableer complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 417 or Equivalent of JAQUAR/PARKO/PRAYAG

S & F in repairs sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed by Engr-in-Charge.

S & F 15 mm bore overhead shower 250 mm dia single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 381 mm long (cat part No-SA 106 /108 Of ESS ESS Croma) Square shape with wall flange complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part Not FR 208 or Equivalent of JAQUAR/PARKO/PRAYAG

S & F in repair 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or COld unserviceable' with long screwed sunk and fly nuts complete all as specified and as directed by Engr-in-Charge. Make:- ESS ESS CROMA Cat Part No C 201 or Equivalent of JAQUAR/PARKO/PRAYAG

S & F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm complete all as specified and as directed by Engr-in-Charge. Make- Blue Star/ Prayag/ Jindal/Nirali

S & F in repair 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-Charge. Make : Prince/Finolex/Supreme/HIL Limited (Birla Aircon)/Astral

Demolition of cement concrete in ground floor & paving, n. exc 15 cm thick (below or above GL), unreinforced complete all as specified and directed and removing debris outside MD land complete all as specified and as directed by Engr-in-Charge

M & L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatments complete all as specified and directed.

M & L for applying three coats of polyurethane waterproofing paint on new plastered surface as per manufacturer's instruction for sunken portion complete all as specified and directed.by Engr-in-Charge.

M & L for 10 mm thick ready mix plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished even and fair for sunken portion complete all as specified and directed by Engr-in-Charge. Note: WPC shall be measured and paid for seperately under relevant item.

S & F UPVC pipes , out side dia 16 mm, of pressure rating 10 Kgf/Sqcm as spout pipe, fixed in floors etc complete all as specified and directed by Engr-in-Charge. Make : Prince/Finolex/Supreme/HIL Limited (Birla Aircon)/Astral

S & F in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 'P' or S trap, connector piece of CI pipe upto 'T'/ 'Y' joint and connection to trap and to flushing pipe, anti-syphonage pipe etc and provision of lime concrete bedding complete all as specified and as directed by Engr-in-Charge. Make:Neycer Kermag (Standard)/Hindware (Ist Quality)/ Parryware (Super Fine)/ Cera (Ist Quality) /Jaquar

Taking down Chowkhats and shutters of windows/ventilators with wire mesh / glass and MS grills of any size including all fittings and fixtures complete all as specified and as directed by Engr-in-Charge.

S & F powder coated/anodised aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

S & F sheet glass, ordinary quality, 5.5 mm thick and glazed with oil putty or fixed with rubber beading, in square not exceeding 0.5 Sqm in each pane omplete all as specified by Engr-In- Charge. Make -(a) Saint Gobin (b) Asahi (c) Atul Glass Industries (iv) GOld unserviceableen Fish (v) Modi Guard (vi)Hindustan Pilkington Glass

S & F of aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples omplete all as specified by Engr-In- Charge.

S & F Aluminium anodised grill with and including suitable aluminium anodized 25 to 30 micron E/H section frame, 1.5mm thick as required with aluminium riveted/screwed attachment complete all as specified and directed by Engineer-in-Charge. Note- Aluminium grill shall be of Deco Grill of M/s ELESAR FOCHHI Ltd as per design no. DG 102, 7.5mm i.e. 6mm thick & 7.5mm wide or approved design in M/s Royal grill/National grill

M & L for preparation of Old unserviceable painted steel surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint (up to any height) including scaffolding wherever required for external painting complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of Old unserviceable painted steel surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint (up to any height) including scaffolding wherever required for external painting complete all as specified and directed by Engineer-in-Charge. Make for Item No. 72 & 73-(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

S & F in repair 20 mm dia decorative type curtain rods, chromium plated, anodised aluminium alloy with fixing brackets and all other connected works complete all as specified and directed. Note- Brackets shall be measured & paid seperately

S & F in repairs Fancy type, decorative bracket suitable for curtain rod 20mm dia complete all as specified and as directed by Engr-in-Charge.

S & F in repairs Stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600mm including all fixing screws , rack hooks, etc and attachments, design of plate rack to be approved by the Engineer -In - Charge and as specified. Make : Prayag/ Blue Star Sanitary Industries Pvt Ltd/ Nirali/ Plasterfl Sanitary (I) Pvt Ltd

Resecuring or easing & adjusting, without taking down shutters of any description, exc 1.00 sqm but not exc 2.00 sqm complete all as specified and as directed by Engr-in-Charge.

Taking down Chowkhats or frames, exc 1.50 sqm but n exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and as directed by Engr-in-Charge.

Taking down Chowkhats or frames n.exc 1.50 sqm each (without taking off shutters from the frames) complete all as specified and as directed by Engr-in-Charge

Taking down shutters of any description n exc. 1.00 sqm each complete all as specified and as directed by Engr-in-Charge

Taking down shutters of any description exc. 1.00 sqm but n.exc. 2.00 sqm each complete all as specified and as directed by Engr-in-Charge

Supplying and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 100 mm X 50 mm size, applying PVC solvent cement and screwed with full body threaded, star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hOld unserviceable fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge

S & F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 120 mm X 50 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hOld unserviceable fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge

S & F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hOld unserviceable fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge

S & F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size, modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed by Engr-in-Charge Make for Item No. 82 to 85- (a) M/S Rajshri Plastiwood, Indore (b) M/S Sintex Industries Ltd (c) M/S Accucell (d) M/S Dura Plast Extrusion

S & F factory made 40 mm thick flush door shutter, solid core construction with block board core and ply wood face panels , both side covered with decorative face laminate incl 5mm thick teakwood lipping alround with centrally locking arrangement with Lock of make Godrej of Link, 7 lever and Self closing Device complete all as specified and as directed by Engr-in-Charge Make of Flush Shutter- KITPLY, Century & Green Ply Make of Veneer- Sonear

S&F 35mm thick flush shutter, solid core construction with block board core and both side with different colours, matt finish of wooden colour solid panel, commercial type on both side complete all as specified and as directed by Engr-in-Charge Make- KITPLY, Century & Green Ply

S & F 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (b) and fitted to chowkhats complete all as specified and as directed by Engr-in-Charge

S & F of 18mm thick Both Side pre-laminated board of any colour /Pattern, Matt finish , grade I as per IS 14587, for frame and shutter for kitchen cabinets & cupboards complete all as specified and as directed by Engr-in-Charge Make:- Action Tesa, Greenply and archidply

S & F of 18mm thick Marine Plywood as per IS 710, laminated of any colour with High glossy acrylic sheet of 3mm thick , grade I , for frame and shutter for kitchen cabinets complete all as specified and directed by Engr-in-charge. Make:- Action Tesa, Greenply and archidply

S & F of medium weight, cold unserviceable rolled mild steel, SS finish, (Partial overlay/ fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing complete all as specified and directed by Engg-in-charge. Make : Godrej Kitchen fittings or equivalent in Sleek by Asian Paints

S & F stainless steel 304, electro-polished for corrosion resistance modular thali hOld unserviceableer / basket having size of 42 x 58.5 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed. Make : Cat Part No 5704 Godrej Kitchen fittings or equivalent in Sleek by Asian Paints

S & F stainless steel 304 electro-polished for corrosion resistance modular cup & saucer hOld unserviceableer / basket size of 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4kg complete all as specified and directed by Engg-in-charge. Make : Cat Part No 5837 Godrej Kitchen fittings or equivalent in Sleek by Asian Paints

S & F of 200mm length stainless steel cabinet drawers handlers complete all as specified and directed by Engg-in-charge. Make:- Godrej Kitchen fittings and Sleek by Asian Paints

S & F in repairs of stainless steel grain trolley SS 304 having size of 525 x 485 x 350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed by Engg-in-charge. Make : Cat Part No-6175 of Godrej Kitchen appliances.

S & F in repairs of stainless steel Plane wire Basket/ trolley SS 304 having size of 506x480x200mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed by Engg-in-charge. Make : Cat Part No-4265 of Godrej Kitchen appliances.

S & F stainlesss steel modular perforated cutlery basket, SS 3054 size size of 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed by Engg-in-charge. Make: Godrej kitchen appliances or equivalent.

S & F stainless steel hanging spice rack having three shelf spaces length of 500 mm complete all as specified and directed by Engg-in-charge. Make: Godrej kitchen appliances.

S & F stainless steel butt hinges, heavy duty of 100mm size complete all as specified and as directed by Engr-in-Charge.

S & F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed by Engg-in-charge.

S & F aluminium handle 150 mm cast type anodised complete all as specified and directed by Engg-in-charge.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engg-in-charge. Make for Item No. 99 to 102 : Classic/ Shalimar/ CLIF/ARGET

S & F in repairs 110 mm dia PVC (SWR) pipes, type B, single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays upto 04 storeys including all steel scaffloding arrangments complete all as specified and directed by Engg-in-charge.

All as per item No 103 above but from Portion of building from five to eight storeys,

All as per item No 103 above but from Portion of building from nine to fourteen storeys,

S & F in repairs 75 mm dia PVC (SWR) pipes, type B, single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays upto 04 storeys including all steel scaffloding arrangments complete all as specified and directed by Engg-in-charge.

All as per item No 106 above but from Portion of building from five to eight storeys,

All as per item No 106 above but from Portion of building from nine to fourteen storeys,

S & F in repairs 75mm dia PVC (SWR) bends with access doors, any radius, at any height including steel scaffOld unserviceableing complete all as specified and directed by Engg-in-charge.

S & F in repairs 110mm dia PVC (SWR) bends with access doors, any radius, at any height including steel scaffOld unserviceableing complete all as specified and directed by Engg-in-charge.

S & F in repairs 75 mm dia PVC (SWR) junction single, (single T) equal or uequal, with access door at any height including steel scaffOld unserviceableing complete all as specified and directed by Engg-in-charge.

S & F in repairs 110 mm dia PVC (SWR) junction single, (single T) equal or uequal, with access door at any height including steel scaffOld unserviceableing complete all as specified and directed by Engg-in-charge.

S & F in repairs 75 mm dia PVC (SWR) vent cowl, at any height including steel scaffOld unserviceableing complete all as specified and directed by Engg-in-charge.

S & F in repairs 110 mm dia PVC (SWR) vent cowl, at any height including steel scaffOld unserviceableing complete all as specified and directed by Engg-in-charge. Make for Item No. 103 to 114 : Prince/Finolex/Supreme/HIL Limited (Birla Aircon)/Astral

S & F in repairs fitting for Cast iron soil, waste or vent pipe, 100 mm bore bends (any radius), diminshing pieces or tapers (larger bore measured.) complete all as specified and directed by Engg-in-charge.

S & F in repairs fitting for Cast iron soil, waste or vent pipe, 100 mm bore branch pieces, single (equal or unequal) ordinary or inverted) (spigot and socket type) or with parallel branches complete all as specified and directed by Engg-in-charge.

S & F in repairs fitting for Cast iron soil, waste or vent pipe, 75 mm bore bends (any radius), diminshing pieces or tapers (larger bore measured.) complete all as specified and directed by Engg-in-charge.

S & F in repairs fitting for Cast iron soil, waste or vent pipe, 75 mm bore branch pieces, single (equal or unequal) ordinary or inverted) (spigot and socket type) or with parallel branches complete all as specified and directed by Engg-in-charge. Make for Item No. 115 to 118- (a) NECO, Nagpur (b) SKF (Singhal Iron Foundry, Mathura)

S & F in repair Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings /cladding having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including steel scaffolding of any height complete all as specified and directed by Engg-in-charge. Make- (i) TATA (ii) JSW (iii) ESSAR (iv) HINDALCO (v) INDALCO (vi) ASSOCIATED PROFILES AND ALUMINIUM LT

S & F joist, channel, angle, tee sections, & MS flats fixed independently, without connection plate, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) for purlins fixed to wooden rafters and all other similar works conforming to Fe 410-W (Gde-E-250) quality-A including dismantling Old unserviceable existing wrought iron work complete all as specified and directed by Engg-in-charge

M & L for minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using SmartCare RP or Epoxy Mortar and supplying and applying High performance hybrid polyurea elastomeric waterproofing coating, cOld unserviceable applied of spray / brush applied, SmartCare Ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications. Supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cOld unserviceable applied of spray / brush applied, SmartCare Ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer's specifications, over and including padding of cement concrete Type B1, 1:2:4 (20 mm graded stone aggregate) 25 mm thick concrete on RCC roof surfaces and all other similar works complete all as specified and directed by Engg-in-charge.(SmartCare Ultron Hybrid Polyurea )

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removing debris out side MD land complete all as specified and directed by Engg-in-charge.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan, exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed by Engg-in-charge.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in any position ( Beam, landing Chajja and Roof slab etc ) ground floor/ other than ground floor, projection of balcony complete all as specified and directed by Engg-in-charge.

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc, n exc 10sqm on plan and n exc 1.50m in depth and getting out in soft/loose soil complete all as specified and directed by Engg-in-charge.

S & F continuous hinge, mild steel, 30mm thick flaps and fixed to cup board shutter complete all as specified and directed by Engg-in-charge.

S & F aluminium alloy hasps and staples, type -1, safety type, size 115 mm, anodized finish, not be less than Grade AC 10 of IS 1868 : 1996 including fixing with screws complete all as specified and directed by Engg-in-charge. Make for Item No. 126 & 127 : Classic/ Shalimar/ CLIF/ARGET

S & F in repairs PVC (SWR ) gully trap 125/110mm and jointing with solvent cement and fixed in position complete all as specified and directed incl concrete type B1(1:2:4) complete all as specified and directed by Engg-in-charge. Make : Prince/Finolex/Supreme/HIL Limited (Birla Aircon)/Astral

M & L for concrete bed to RCC NP3 pipes of internal diameter 150 mm, laid in trenches of depth upto 1.2 m, in cement concrete 1:3:6, type C-2 using 40 mm nominal size graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engg-in-charge.

M & L for 150 mm bore (internal dia of pipe) reinforced concrete pipes, Class NP3 , laid in trenches and jointed with CM (1:1) complete all as specified and directed by Engg-in-charge. Make-(a) Thuluvananikal Pipes (b) Everest (c) Himalaya (d) Indian Hume Pipes

Removing excavated (soil) materials and deposited outside MD land, up to a distance of 15 km complete all as specified and directed by Engg-in-charge.

M & L for preparation of Old unserviceable painted wooden surfaces of any description not otherwise described over 10cm in widht or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Make-(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

S & F High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 of 38/40mm bore, fixed complete to walls,ceilings or in floors etc complete all as specified and directed by Engg-in-charge.

S & F High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 of 32mm bore fixed complete to walls,ceilings or in floors etc complete all as specified and directed by Engg-in-charge. Make for Item No. 133 & 134 : Prince/Finolex/Supreme/HIL Limited (Birla Aircon)/Astral

Returning, filling in including spreading, levelling, watering and well ramming in layers, not exc 25 cm complete all as specified and directed by Engg-in-charge.

S & F in repairs GI tubing 40mm bore, medium grade with all fittings conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engg-in-charge. Make- (a) Tata (b) Swastik (c) Jindal (d) Surya (e) Prakash (f) Indian Tube Company (g) Zenith (h) BST (j) GST (Gujrat Steel Tube)

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed by Engr -in-Charge.

S & F in repairs 40mm bore Gun Metal Gate Valve with iron wheel head, screwed both ends for iron pipes complete all as specified and directed by Engr -in-Charge. Make- (a) Leader (b) Zoloto (c) Sant

M & L for 75mm thick cement concrete (1:2:4) type B-2, using 40mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including necessary expansion joints, filled solidly with a hot mixture of blown grade bitumen and sand 1:1 by weight complete all as specified and as directed by Engr-in-Charge.

M & L for 304 grade stainless less tubing (Square/Round/Rectangular) of suitable gauge as in SS guard bars, railings, SS frame works including all fixing arrangments including taking down of Old unserviceable SS guard railing complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp hOld unserviceableer, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work after credit for the same is recovered by the dept and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engineer-in- Charge

Taking down Old unserviceable unserviceable submain wiring complete including all fixtures such as switches, bulk head fittings, building security light fittings, plug socket boxes etc and removing unserviceable materials from site of work after credit for the same is recovered by the dept and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engineer-in- Charge

M & L for Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories with concealed 1.2 mm thick pressed steel sunken box and with including modular cover plate and frame, suitable for fixing modular switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / Ex Fan / wall fan controlled by one modular switch, 1 way 6/10 amps, 1 module complete all as specified and directed by Engineer-in- Charge

All as per serial no.143 here-in but for bell point controlled by one switch

All as per serial no.143 here-in but for one light point controlled by two way switches (two way switch point wiring)

All as per serial no.143 here-in but for one ceiling fan controlled by one switch & regulator

All as per serial no.143 here-in but for One 3 pin socket point 5 Amps on independent board

All as per serial no.143 here-in but for One 3 pin socket point 5 Amps on same board

All as per serial item no 143 here-in-before but for one socket point on independent board, 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm FRLSH green colour wire as earth continuity conductor connected to common earth dolly complete all as specified & as directed by engr-in-charge. Make for Item No. 143 to 149- Make for Cable :Havells/Finolex/ Nicco/Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral

S & F modular Switch piano, flush type, single pole, one way 6 Amp complete all as specified and directed by Engineer-in- Charge

S & F modular Switch piano, flush type, single pole, one way 16 Amp complete all as specified and directed by Engineer-in- Charge

S & F modular socket 2/3 pin, 6 Amp complete all as specified and directed by Engineer-in- Charge

S & F modular socket 2/3 pin, 6/16 Amp complete all as specified and directed by Engineer-in- Charge

S & F modular stepped type electronic fan regulator 450 watt flush type, two module complete all as specified and directed by Engineer-in- Charge

S & F modular bell push, 2 module, 10 Amp complete all as specified and directed by Engineer-in- Charge

S & F ceiling rose, surface bakelite 65 x 50 mm, two to three terminals complete all as specified and as directed.

S & F modular Switch piano, flush type, single pole, two way 6 Amp, 1 module complete all as specified and directed by Engineer-in- Charge

S & F 2 module, white or any colour cover plate with frame and with brass screws and cup washers approved by GE complete all as directed.

S & F 3 module, white or any colour cover plate with frame and with brass screws and cup washers approved by GE complete all as directed.

S & F 6 module, white or any colour cover plate with frame and with brass screws and cup washers approved by GE complete all as directed.

S & F 8 module, white or any colour cover plate with frame and with brass screws and cup washers approved by GE complete all as directed. Make for Item No. 150 to 161- (a) Anchor Roma (b) Legrand (c) Crabtree (d) Havells (e) Indo Asian (f) Polycab

M & L for Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories with concealed with 1.2 mm thick pressed steel sunken box with laminated sheet cover for fixing switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / Ex Fan / wall fan controlled by one switch complete all as specified and directed by Engineer-in- Charge

All as per serial no.162 here-in but for bell point controlled by one switch

All as per serial no.162 here-in but for one light point controlled by two way switches (two way switch point wiring)

All as per serial no.162 here-in but for one ceiling fan controlled by one switch & regulator

All as per serial no.162 here-in but for One 3 pin socket point 5 Amps on independent board

All as per serial no.162 here-in but for One 3 pin socket point 5 Amps on same board

All as per serial item no 162 here-in-before but for one socket point on independent board, 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm FRLSH green colour wire as earth continuity conductor connected to common earth dolly complete all as specified & as directed by engr-in-charge. Make for Item No. 162 to 168- Make for Cable :Havells/Finolex/ Nicco/Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral

S & F Switch, piano type, single pole, one way, 5 amps, 240 volt flush type complete all as specified and as directed by Engineer-in-Charge.

S & F Switch, piano type, single pole, one way, 15 amps, 240 volt flush type complete all as specified and as directed by Engineer-in-Charge.

S & F switch socket outlet, 2/3 Pin, 5 Amps, flush type complete all as specified and as directed by Engineer-in-Charge.

S & F switch socket outlet, 6/16 Amps, 2/3 pin, flush type complete all as specified and as directed by Engineer-in-Charge.

S & F step type electronic fan regulator, capacitor type, 450 watt, 240 volts, 50 Hz, single phase, flush type on the existing phenolic laminated sheet complete all as specified and as directed.

S & F Bell push AC, 240 volt, 6 Amp, flush type complete all as specified and as directed by Engineer-in-Charge.

S & F Switch, piano type, single pole, two way, 5 amps, 240 volt flush type complete all as specified and as directed by Engineer-in-Charge.

S & F Electric call bell, AC, 230 V ,single pole, ding dong type complete all as specified and as directed by Engineer-in-Charge

S & F in repairs Electric call bell, AC, 230 V ,single pole, ding dong type complete all as specified and as directed by Engineer-in-Charge

S & F lamp holder , PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 169 to178 : (i) Anchor (roma) (ii) Crabtree (iii) Leader (iv) Legrand (v) Havells (vi) C & S Electric Ltd

Fixing only in repair 20 watt LED, 4 feet long, ready to use pack, fixed on & including PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076 PVC insulated, multi strandard, copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and as directed by Engineer-in-Charge.

Fixing only in repair surface mounted, 9/10 watt LED, 2 feet long mirror light fitting, ready to use pack, fixed on & including PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076 PVC insulated, multi strandard, copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and as directed by Engineer-in-Charge.

Fixing only in repair decorative wall mounting fitting suitable for 9W LED lamp working on 240 Volts, 50HZ AC including LED bulb of capacity 9 Watt complete all as specified and as directed by Engineer-in-Charge.

Fixing only in repair decorative wall mounted bed side fitting suitable for 9 W LED lamp B22 base working on 240 Volts, 50HZ AC including LED bulb of capacity 9 Watt complete all as specified and as directed by Engineer-in-Charge.

Fixing only in repairs LED 18 Watt surface mounted circular type downlighter fitting connecting with cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as specified and directed by Engineer-in- Charge. Note for Item no. 179 to 183 : LED Light fittings shall be issued under Sch 'B' for "free for fixing only". The Quoted rate is deemed to be inclusive of MISC items & addition alteration works required at site complete and no extra payment will be admissible in this regard.

S & F in repairs MCB SP, 6 amps to 32 amps, 240 volts,10 KA , C series complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs MCB SPN, 63 amps, 240 volts,10 KA, C series complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs MCB SPN, 40 amps, 240 volts,10 KA, C series complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs sheet metal enclosures, double door, for DBs when MCBs to be used, 240 volts, 16 way with 200 Amps rated bus bar,single pole and neutral, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/ thimbles duly crimped for connection and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engineer-in- Charge

S & F in repairs single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp with one single pole, MCB, 20 Amps, C series complete all as specified and directed by Engineer-in- Charge

S & F in repairs DB vertical type 4 way TPN , double door load line powder coated complete alongwith 200 Amp rated Bus bar, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB complete all as directed.

S & F in repairs sheet metal enclosures, double door, for DBs when MCBs to be used, 240 volts, 2 way with 200 Amps rated bus bar,single pole and neutral, fixed on wall with the help of MS flat, angle iron duly grouted on wall including MS nuts and bolts and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engineer-in- Charge

S & F in repairs sheet metal enclosures, double door, for DBs when MCBs to be used, 240 volts, 4 way with 200 Amps rated bus bar,single pole and neutral, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/ thimbles duly crimped for connection and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engineer-in- Charge

S & F in repairs sheet metal enclosures, double door, for DBs when MCBs to be used, 240 volts, 8 way with 200 Amps rated bus bar,single pole and neutral, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/ thimbles duly crimped for connection and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engineer-in- Charge

S & F in repairs MCCB 4 pole with adjustable thermal & magnetic settings, 415 volts, 63 Amps with breaking capacity 16 KA including all connections and testing complete all as specified and as directed by Engineer-in-Charge. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB complete all as directed.

S & F in repairs MCCB 4 pole with adjustable thermal & magnetic settings, 415 volts, 125 Amps with breaking capacity 16 KA including all connections and testing complete all as specified and as directed by Engineer-in-Charge. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB complete all as directed. Make for Item No.184 to 194 : (i) Larsen & Toubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric (ix) Standard

M & L for Submain wiring (concealed type) for AC point complete with and including 2 runs of 4 sqmm single core FRLSH PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade and 4 sqmm FRLSH PVC multistranded copper conductor cable as earth continuity conductor and connected to common earth dolly , drawn through and including PVC conduit, heavy duty of adequate size ( not less than 20mm dia) including accessories, fixed on walls including cutting chases for conduits including taking down existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Make for cable :(i) Havells (ii) Finolex (iii) Nicco (iv) Plaza (v) Anchor (vi) Polycab (vii) RPG (viii) GLOSTER (ix) RR Kabel (x) KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Presfit (iv) Precision (v) Astral Note : Two runs of 4 sqmm PVC insulated cable and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one unit length.

S & F in repairs GI perforated and ladder type cable tray of thickness size 1.5 mm and of size 150 mm X 30mm width and depth including connected other accessories by fixing screws of adequate size and making good complete all as specified and directed by Engineer-in- Charge

M & L for Submain wiring complete with and including 4 runs of 25 sqmm single core FRLSH PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade and 25 sqmm FRLSH PVC multistranded copper conductor cable as earth continuity conductor and connected to common earth dolly for housing the wires for TPN DB to TPN DB, drawn through and including PVC conduit, heavy duty of adequate size ( not less than 32mm dia) including accessories, fixed on walls including cutting chases for conduits including taking down existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note: (a) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB complete all as directed. (b) Four runs of 25 sqmm PVC insulated cable and one run of 25 sqmm cable and one run of PVC conduit shall be measured as one unit length.

M & L for Submain wiring complete with and including 2 runs of 16 sqmm single core FRLSH PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade and 16 sqmm FRLSH PVC multistranded copper conductor cable as earth continuity conductor and connected to common earth dolly for housing the wires for one AC point , drawn through and including PVC conduit, heavy duty of adequate size ( not less than 25mm dia) including accessories, fixed on walls including cutting chases for conduits including taking down existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note: (a) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB complete all as directed. (b) Two runs of 16 sqmm PVC insulated cable and one run of 16 sqmm cable and one run of PVC conduit shall be measured as one unit length. Make for Item No. 197 & 198 Make for cable :(i) Havells (ii) Finolex (iii) Nicco (iv) Plaza (v) Anchor (vi) Polycab (vii) RPG (viii) GLOSTER (ix) RR Kabel(x) KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral

S & F non metallic PVC casing capping of size 38 x 20mm complete all as specified and directed by Engineer-in- Charge Make : Precision/ Modi/Presto Plast/ Supreme/ Polycab/ Plaza/Pressfit

Swaran Builders

Mukund Enterprises Private Limited