SPECIAL REPAIR TO BLDG NO. T-30, T-39 AND T-40 AT DOGRA FORT AND SPECIAL REPAIR TO ACMS/MCCBs/LT FEEDER PILLAR BOX/UG CABLE AT DE COY AT KIARI AREA UNDER GE 860 EWS.

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick type B1 PCC 1:2:4 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engr-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding in CM 1:6 for laying floor finishes receiving floor tiles complete all as specified and directed by Engr-in-Charge.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding in CM 1:6 for laying floor finishes receiving floor tiles complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding in CM 1:6 for laying floor finishes receiving floor tiles complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic tiles 450x300x7mm thick coloured/shaded as in vertical surfaces such as skirting dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface with 10 mm thick backing coat rendering (1:4) complete all as specified and directed by Engr-in-Charge.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

M&L for veneered decorative plywood 6mm thick (5 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work complete as in wall paneling complete all as specified and directed by Engr-in-Charge.

M&L for veneered decorative plywood 4mm thick (3 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work complete as in ceiling paneling complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. in framed work under 40 sq. cm in section complete all as specified and directed by Engr-in-Charge.

M&L second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 6 sqcm & not exc 13 sqcm, secured with nails or brads complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4 sqm with shutters without taking of shutter from the framecomplete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame not exc 1.5 Sqm with shutters without taking of shutter from the framecomplete all as specified and directed by Engr-in-Charge.

S&F Plain solid straight chowkats or frame rounded or chamfered put together with glue pined at joints with 2nd class hard wood complete all as specified and directed by Engr-in-Charge.

S&F for 35mm thick 2nd class hardwood Plain, framed, panelled door shutters(any number of panels), with panels of timber flat on both sides(feather edged), veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F for 150mm extruded aluminium handle complete all as specified and directed by Engr-in-Charge.

S&F MS butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed by Engr-in-Charge.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy barrel tower bolt of extruded type 150 mm long complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy barrel tower bolt of extruded type 75 mm long complete all as specified and directed by Engr-in-Charge.

S&F for 4mm thick sheet glass ordinary quality and glazing with aluminium snap beading on aluminium frame for door/window and ventilator in square n exc 0.5 sqm each complete all as specified and directed by Engr-in-Charge.

M&L preparation of untreated new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L First class soft wood sectional area not exceeding 6 sqcm Moulding as in cornices, picture rails and the like , secured with nails or brads complete all as specified and directed by Engr-in-Charge.

Demolition of stone/PCC block/boulder masonary built in cement mortar including all quions , arches,pillarsetc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on wall, ceiling, roof etc incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for Pre-cast cement concrete block masonary Type C-1 (1:3:6) using 20mm graded crushed stone aggregate with solid blocks ,exc. 10cm in width and setting inn mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete in CM 1:4 and finishing the surfaces even and smooth (without using extra cement) as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete sur- faces in cement mortar 1:6 and to be finished even and smooth without using extra cement - Internal Plaster complete all as specified and directed.

M&L for preparing old surfaces including priming plastered and other surfaces with alkali resistant priming paint and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparing old surfaces and applying two coats of white wash on walls complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces and apply two coats of cement base paint complete all as specified and directed.

S&F in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with 32 mm dia flush pipe connecting to squatt pattern etc. ISI approved complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china ( EWC)pedestal pan and trap , including connection to drain ( or outgoing pipe ) and to flushing pipe antisyphonage pipe, with seat cover etc complete including concrete and making good to floor complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china Wash hand basin, white, flat back size 550 x 400mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32mm size bore of pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair cast copper alloy chromium plated glass shelf complete all as specified and directed by Engr-in-Charge.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repair Toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair stop valves / angular valves 15mm bore chromium plated, cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge.

S&F in repair bib taps 15mm dia cast copper alloy with crutch or butter fly handle fancy type screwed down for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC connection 15 mm bore 450mm long with screwed socket of brass on both ends and rubber washer complete all as specified and directed by Engr-in-Charge.

S&F in repair of soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated Tubular Towel rail 20 mm dia D type 60 cm long complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe complete all as specified and directed.

S&F in repairs 75mm dia PVC(SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

Taking up and down GI tubing and connection including cleaning for re-fixing or removing to store 15mm bore of pipe complete all as specified and directed by Engr-in-Charge.

Taking up and down GI tubing and connection including cleaning for re-fixing or removing to store 20mm bore of pipe complete all as specified and directed by Engr-in-Charge.

S&F 20mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.

S&F 16mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering or wall etc complete all as specified and directed by Engr-in-Charge.

M&L 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws as specified and directed by Engr-in-Charge.

M&L 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 as specified and directed by Engr-in-Charge.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing all retrieved materials such as fitting & fixture from the site and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring complete for one light point / exhaust fan point / bell point controlled by one 1-way switch/ bell push, with 1.5 Sq mm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl Metal flush box of suitable size for fixing modular switches / sockets etc and making good surface by wall panelling etc, complete all as directed. Make : Havells / Finolex / Polycab.

Description all as per item Srl No. 61.00 here in before but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item Srl No. 61.00 here in before butt for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item Srl No. 61.00 here in before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

Supply and fixing in replacement switch piano flush button single pole one way 5 Amps complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement switch, socket combination 2 in 1, 5 Amp, flush type completeall as specified and as directed by Engr-in-charge.

Supply and fixing in replacement switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge.

Supply and fixing in replacement angular lamp holder, PVC/Polycaronate type with back plate suitable for 9/13/15 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge.

Supplying and fixing in replacement LED 9/13/15 Watt complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing in replacement LED batten lights fitting 1x 20W, 220V,AC decorative type including LED tube light connecting up with three core flexible copper conductor cable of suitable size complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed by Eng-In-Charge.

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing in replacement new energy saving LED Bulk head fitting 10/12 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Eng-In-Charge

Supply and fixing in replacement sheet Metal enclosure single shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint all as specified and as directed by the Engr-in-charge.

Supply and fixing in replacement MCB single pole and neutral 32 to 40 Amps , 240 volt, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in replacement MCB single pole 6 to 32 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to CBDB’s as specified or indicated including taking down old earthing and testing on completion complete all specified and as directed by the Engineer-in-Charge.

S&F in replacement of LT FPB made out of CRCA sheet 3 mm thick outdoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 tinned copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 1500 A capacity complete with powder coating, necessary internal electric connection as required and provision of the following:(MRS Kiari- Main Panel)

Incoming: LT switch gear 440 Volts 3 phase, 4 wire 50 cycles, cubicle or truck type complete with air circuit breaker, with microprocessor release IPR -E eleteical draw type 1000 Amp, 100 KA , overload protection, no-volt release with necessary CTs,meter and cable boxes of rating upto - 01 NO for incoming

Outgoing: a) ACB AC 3 Phase 415 V, 50Hz 4 pole 630A capactiy 100KA with adjustable type thermal and magnetic setting relays - 02 Nos ( one No working and stand by) b) MCCB AC 3 Phase 415 V, 50Hz 4 pole 200 A capactiy 36 kA with adjustable type thermal and magnetic setting relays - 04 Nos c) MCB SPN 40 Amps 2P - 01 for local lighting d) Intelligent Panel meter to measure voltage, current, frequency, power factor, etc with all connected CTs e) LED indicating lamps with colour Red, Yellow, Blue - 01 Set (f) Panel drawing shall be got approved from GE before placing order.

S&F in replacement of LT panel box, by means of nut bolts washer, and opening of existing LT cables properly stacking, and supply, installation, testing and commissioning of CPRI approved, factory made, LT panel board cubical, Outdoor type, floor mounted double door, 3 phase 4 wire, 50 cycles, 415 Volts. The panel board shall be made of 3.15 thick CRCA sheet for load bearing members and 16 SWG (1.6 mm thick) for doors covers and internal partitions and shall be powder coated both side. Base frame of the panel shall be made of ICMC channel of size 50 x50 x 6mm, duly grouted on platform made of brick work in CM (1:2:4), 15mm thick plastering in CM (1:6) having minimum height of 450mm. The panel shall be provided with separate compartments for each switch gears with hinged door including interlocking with switch gears. The panel board shall be suitable for AC, 415 Volts, 50 Hz, 3 phase, 4 wire supply complete with epoxy insulated 800 Amps rated high conductivity aluminium bus bars, supported with DMC / SMC barriers and coluor coded, prewired with copper cable, the degree of protection is IP-54. the panel shall be complete with instrumentation such as LED phase indicating lamps and CT's, including extended aluminium strip of rating of Incomer (400Amps), and outgoing as per rating of MCCB’s, including aluminium lugs to connect the cable dismantled before etc., and comprising of the following:-

(a) MCCB 400 amps, 4 pole with breaking capacity 36KA (Adjustable thermal & magnetic release) - 01 Nos (Incomer) (b) MCCB 160 amps, 4 pole with breaking capacity 25 KA (Adjustable thermal & magnetic release) - 01 Nos (outgoing) (c ) MCCB 100 A 4 pole with breaking capacity 25 KA (Adjustable thermal & magnetic release) - 08 Nos (outgoing) (d ) MCCB 63 A 4 pole with breaking capacity 25 KA (Adjustable thermal & magnetic release) - 08 Nos (outgoing) (e) Multifunctional meter Cat No 30332567 MAKE schneider (f) Moulded fuse holder 125 A including HRC fuses = 3 Nos (g) Indicator lamp RYB :01 Set (h) CT'S 400/5 01 Set Make-L&T (j) Panel drawing shall be got approved from GE before placing order.

(e) Multifunctional meter Cat No 30332567 MAKE schneider (f) Moulded fuse holder 125 A including HRC fuses = 3 Nos (g) Indicator lamp RYB :01 Set (h) CT'S 400/5 01 Set Make-L&T (j) Panel drawing shall be got approved from GE before placing order.

Supply and Laying in replacement of cable XLPE FRLS Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 240 sqmm complete all as specified and directed by the Engineer-in-Charge.

Description all as per item Srl No. 81.00 here in before but of size 3.5 core 95 sqmm.

Description all as per item Srl No. 81.00 here in before but of size 3.5 core 70 sqmm

S&F in replacement of sheet metal double door enclosure MCCB TPN DBs 4 way 415V complete flush mounted all as specified and as directed.

Supply and Laying in replacement of GI pipe light grade in trenches/Floor or fixed to Pole/Wall with all fitting for protection of cable of size 100 mm bore complete all as specified and directed by the Engineer-in-Charge.

Description all as per item Srl No. 85.00 here in before but of size 80 mm bore

Description all as per item Srl No. 85.00 here in before but of size 50 mm bore

S&F in replacement of MCB SP-06 to 40 Amp, 240 volts complete all as specified.

S&F in replacement of MCB SPN-06 to 32 Amp, 240 volts complete all as specified.

S&F in replacement of MCB TPN-63 Amp, 240 volts complete all as specified.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for trench of cable/foundation of pole and stay etc and getting out in hard/dense soil soil complete all as specified and as directed by the Engineer in charge.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for trench of cable/foundation of pole and stay etc and getting out in hard rock complete all as specified and as directed by the Engineer in charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed by the Engineer in charge

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point all as specified and as directed by the Engineer in charge.

Taking out Old UNSV earthing and M&L for Earthing complete with GI plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to steel earth STRIP 32X6MM up to 7.5 mtr by means of nuts, bolts, check nuts, washers of tinned brass, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering,including charcoal or coke and salt in alternate layers and filling earth pit with fresh vegetable soil below copper plate and above upto ground level as required and necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I 2009 including testing on completion all complete as specified and directed. Note:(i) Charges for earth resistivity test deemed to be included in the quoted rate.ii) Earth resistance value shall be less than 1.0 ohm)

M&L Sand cushioning to underground cable complete all as specified in clause 19.75 of SSR Part - I, complete all as specified and directed by Engr-in-Charge. Note: only punned thickness shall be measured and paid.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm all as specified and directed.

M/S BALI CONSTRUCTIONS (BID ID -3206609)

M/S BHAT ENGINEERS (BID ID -3206096)

M/S BILAL AHMAD BHAT (BID ID -3206118)

M/S RAVINDER SINGH (BID ID -3206650)

RAJINDRA ENGINEERS & CONTRACTORS (BID ID -3206981)