Construction of Toilet Block with Water Supply at Kunnam Bus Stop H/O Kunnam Panchayat

Amount

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Supplying and filling in foundations and basement with filling M- sand in layers not exceeding 15 cm.thick,well watered,rammed and consolidated etc. complete complying with standard specifications.

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete.

Reinforced Cement Concrete of mix 1:11/2:3 (One cement, one and half sand and three aggregate) with water proofing compound of 2% by weight of cement used and using 20mm size machine crushed granite stone jelly etc., complete. Column footing - Foundation Below GL

Above GL

Supplying and erecting water tight steel shuttering to centering including necessary supports for plane surface in Foundation and Basement for RCC Columns, Footings, Plinth beams, bed blocks, staircase steps etc., Below GL

Column

Roof Slab Lintel

Brick work using second class Country bricks of size 8 3/4" x 4 1/4" x 2 3/4" in Cement Mortar 1:5 (one cement and Five sand) including curing, neat finishing, etc, complete complying with standard specification. Upto Basemennt

Ground Floor

Supplying, fabricating and placing in position M.S. or R.T.S. reinforcement grill for RCC works as per the design given including cost of steel and binding wire etc., complete

Special ceiling plastering with cement mortar 1;3. using 10mm thick in all floors etc.,complete.

Plastering with cement mortar 1;5, using 12mm thick in all floors etc.,complete.

Dadooing wall with glazed tiles of size 150 x 150 x 150mm laid in cement mortar 1:2, 10mm thick and pointing with white cement etc., complete.

Finishing the floor with ceramic tiles of approved colour of size 300 x 300 x 6mm over a base layer in CM 1:3 mix – 20mm thick etc., complete.

Weathering Course concrete with broken brick jelly of 20mm gauge in pure slaked lime to be laid in a single layer (No sand to be added) over roof slab the proportion of brick jelly to lime being 32 to 12.5cft by volume we

Finishing the top of roof with one course of New Machine Pressed tiles of approved quality of size 23x23x2cm laid in cement mortar base layer 1:3 (One cement and Three sand) 12mm thick mixed with water proofing compound etc.,

White washing two coats with best shell lime including cost and conveyance and all labour charges etc completed

Distempering two coats with oil bound distemper the rate including cost of all materials and labour charges etc.,

Painting with ultima apex paint 2 coats over one coat of priming cost for approved quality including cost and labour charges etc.,complete.

Supplying and fixing of 110mm dia PVC pipe for rainwater down fall pipe including cost and labour charges etc.,complete.

Painting with approved quality ready mixed paint two coats including cost and conveyance of all materials to site, labour charges etc., complete for doors and windows.

Supplying and fixing of Steel Glazed Ventilator of size 0.60 X 0.45

Supplying and fixing of Steel Door of size 0.90 X 2.10

Supplying and fixing of Steel Door of size 0.75 X 2.10

Supplying and fixing of European water closet including cost and all accessories etc.,complete.

Supplying and fixing of Wash Hand basin for appoved ISI quality including cost and labour fixing charges etc., complete.

Supplying and fixing of Mirror for approved quality including cost and labour charges etc.,complete.

Earth work open excavation for septic tank dispersion Trench pipe line, Swear line etc., in all soils except in rock requiring blasting and depositing the excavated earth in places shown by the departmental officers with an initial lead of 10metres and initial lift of 2metres etc., complete complying with standard specification.

Supplying and filling in foundations and basement with filling M- sand in layers not exceeding 15 cm.thick,well watered,rammed and consolidated etc. complete complying with standard specifications.

Cement Concrete 1:4:8 (One Cement, four sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in cement mortar 1:5 (one cement and five sand) using IInd class kiln burnt country brick of size 8 3/4 ” x 4 1/4 ” x 2 ¾” for the following items including curing etc. complete complying with standard specification.

Cement Concrete 1:1.5:3 (One Cement, one &half sand and three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill, fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrator, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One cement and three sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Plastering wall with Cement Mortar 1:3 (One cement and Three sand), 12 mm thick using WPC at 2 % weight of cement used etc., complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete, 1 : 2 : 4 ( One cement, two sand and four jelly) using 20 mm size hard broken granite stone jelly for wearing coat laid evenly to the required thickness and finishing the top surface smooth etc., complete complying with standard specification.

Supply and fixing in position best approved quality and make white glazed earthen ware oriya type Indian water closet of size 580 mm with P or S trap embedding the closest and trap to shape in position with brick jelly lime concrete 1:2:5 (one lime two sand and five brick jelly) using 40 mm broken brick jelly and finishing the top to required slope and including giving connections to the PVC soil stacks using 0.60 m long PVC Pipe 110 mm dia. 6 kg/sqcm by dismantling masonry, RCC roof or floor slaps and making good, the disturbed portion to original condition without and leakage etc. complete as directed by the departmental officers and complying with standard specifications (The water closet P or S trap are to be got approved by the Executive Engineer before use on works)

Supplying and fixing in position best quality chromium plated towel rail of 60cm length and 20mm dia with C.P brackets of same material including fixing with necessary T.W Plugs, Brass C.P. screws and dismantling masonry etc., Complete complying with standard specification.

Supplying and fixing Brass CP soap tray including fixing with necessary teak wood plugs, CP screws and dismantling masonry and redoing the sane to the original condition.

Supplying and fixing in position PVC Pipe of 6 kg per sq.cm. best approved quality and make conforming to ISS of the following diameter and providing leak proof joints etc., including fixing to the wall with necessary teakwood plugs, brass, screws, mild steel clamps, etc., and giving connections to the sanitary fitting including dismantling brick masonry RCC floor or roof slab etc., wherever necessary and redoing the disturbed portion to the original condition complete complying with standard specification (The PVC pipe should be got approved from the Executive Engineer before use on works). 110mm dia PVC Pipe AGL

75mm dia PVC Pipe

160mm dia PVC Pipe BGL

Supplying and fixing in position of the following PVC specials best approved quality confirming to ISS and providing leak proof joints with PVC adhesive etc, including fixing to walls with necessary teak wood plugs screws etc. and giving connections to the PVC pipe dismantling the brick masonry RCC floor or roof slab and redoing the disturbed portion to original conditions etc. complete complying with standard specifications. (The PVC specials should be got approved from the Executive Engineer before use on works). 110mm dia PVC Door Tee

110mm dia PVC Plain bend

75mm dia PVC Door Bend

75mm dia PVC Plain Bend

110mm dia PVC Tee

Supplying and fixing in position best approved quality PVC Nahini trap of 110 mm x 75 mm size with stainless steel gratings of approved quality fixed over a bed of lime concrete.1:2:5 (one lime two sand and five brick jelly) using 40mm broken brick jelly including dismantling the flooring concrete / Brick masonry wherever necessary and redoing the disturbed portion to the original condition and giving in connection to the PVC soil (stacks) pipe as directed etc., complete complying with standard specifications. (The PVC Nahini trap should be got approved from the Executive Engineer before use on works).

Supplying and fixing in position P.V.C. ventilating shaft of 110mm dia with working pressure of 4kg/cm2 and 3m height with P.V.C. cylindrical cowl and fixing in position as directed etc., complete. (The P.V.C.pipe and cowl should be got approved from the Executive Engineer before use on work).

Supplying and fixing in position of flat back lipped mouth Urinals Gents Toilet

Supplying and fixing in position squatting type urinal Gents Toilet

Supplying, laying and jointing B class G.I. Pipes of the following dia of approved quality and best variety above ground level including fixing of G.I Specials but excluding cost of such specials and cutting and threading of pipes (The G.I specials will be measured and paid for separately).but including fixing to the wall with necessary clamps and screws, Teak wood plugs making holes in the wall (or) drilling holes in the roof and making good of the disturbed portion to the original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. etc., complete complying with standard specification. 32mm dia

Internal WSA 25mm dia GI Pipe

20mm dia GI Pipe

Supplying, laying and jointing B class G.I pipes of the following dia of approved quality and best variety below Ground level and laid properly to alignment including fixing the required G.I. Specials. but excluding cost of such specials, cutting and threading charges. The pipe is to be covered with tar dipped gunny tapes etc., complete. (The G.I specials will be measured and paid for separately). The rate should be exclusive of necessary earthwork excavation of size 40cm width and to an average depth of 50cm and refilling (The G.I.Pipes should be got approved by the Executive Engineer before use on works) 25mm dia GI Pipe

20mm dia GI Pipe

Supplying and fixing in position G.I. Union of heavy type of approved quality and good variety of various sizes including necessary cutting and threading of G.I. pipes for jointing the union for both internal and external water supply arrangements 32mm dia GI Union In distribution

25mm dia GI Union In distribution

20mm dia GI Union In distribution

Supplying and fixing in position the following galvanized Iron specials of best approved quality and heavy type and good variety excluding fixing charges, but including cost of cutting and threading the G. I. Pipes for jointing the G. I. Specials etc., complete complying with standard specification. 32mm dia GI elbow

25mm dia GI elbow

20mm dia GI elbow

GI Bend 32mm dia

25mm dia

GI Tee 32mm dia

25mm dia

20mm dia

G.I.Reducer Elbow 25x20mm dia

20x15mm dia

G.I.Reducer Tee 32x25mm dia

25x20mm dia

GI Reducer 32x25mm dia

25x20mm dia

20x15mm dia

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve / Wheel Valve heavy type with ISI mark of the following sizes including cost of shellac, thread, including labour charges for cutting and threading of GI pipes as directed by the departmental officers etc., complete complying with standard specification for both internal and external water supply arrangements. The gate valve/ wheel valve should be got approved by the departmental officers before use on works. 32mm dia G.M. Gate Valve

25mm dia G.M. Wheel Valve

Supplying and fixing in position 15mm brass C. P. screw down tap ( Heavy duty ) of best approved make and quality including cutting, threading. G. I. Pipes wherever necessary and fixing to the galvanized iron pipes in position etc., complete complying with standard specification ( Tap to be used on works should be got approved from the Executive Engineer before use). GF,FF Toilets, Kitchen

Provision for Sintex Tank

Geophysical survey charges including conveyance charges for the Geo-physical instruments and other accessories.

Drilling of Borewells any where in District including transportation form one place to another place with in the district in alluvial soils sedimentary strata of clay and sand stone, shale, pebbles boulders etc. 0m to 60m depth

Reaming form 150mm dia pilot bore to 300m dia as directed by Officers 0m to 60m depth

Supply, delivery and conveyance of all following sizes of PVC casing pipes & specials to site as per IS 12818/1992 Supply & delivery of 150mm Dia PVC Plain Casing pipe as per IS 12818 / 2010

Supply & delivery of 150mm Dia PVC screen Repped Casing pipe as per IS 12818 / 2010

150mm Threded Dummy Pvc pipe

Labour charges for inserting (150mm ID) 165mm ID PVC casing pipe with screen or without screen in the drilled hole including jointing the pipe complete supplying and packing the annular space with pebbles of approved quality by the department officer 150mm ID PVC casing pipe

Charges for developing the Borewell with air compress or of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by 'V' notch method.

Supply,delivery of submersible pumpset suitable for Bore well conforming to I.S specifications for the following duty conditions. 1.00 H.P X 15 lpm X 90 m

Supply,delivery of Pannel board with necessary fittings suitable for Submersible pumpset for the following duty conditions. For 1.00 H.P

2.50 sqmm . 3core flat copper cable

Supply & Delivery of G.I Medium class pipes & Special as relivant I.S Specification. 32MM HDPE Hose

Meter Board

EB Deposits

20mm GI pipe

Service wire

Labour charges for erection of 1.00 H.P Submersible pumpset in the bore well including fixing and jointing the cable with clamps twin earthing trail run etc.complete.

Provision for Name board Charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Stalin P