WBIW/EEII/LDCD/eNIT26/25-26SL1

Labour charges for taking out old wood work including cutting bolts and nuts and stacking within a lead of 100 metre etc. complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels)

Taking out Jhaw / Eucalyptus piles from river bed or from elsewhere including carrying, stacking materials in the nearest stack yard. (b) Above 17.5 cm. and up to 25 cm. Diameter

Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed. (i)20.00 cm av. Diameter Note: Diameter of pile to be measured at a distance of 1.5m from the thicker end.

(i)15.00 cm av. Diameter

Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. (i)20.00 cm av. Diameter Note: 1) Payment to be made on the length driven into the ground. Diameter to be measured at 1.5m. from the thicker end. 3) For driving done by pile engine set (without staging) under specific instruction of engineering in charge the rates will be enhanced by Rs. 4.00 per meter.

(i)15.00 cm av. Diameter

Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site. (a) Width of thinner end above 10 cm. and less than 15 cm. (i) Jhaw / Eucalyptus

Best Seasoned wood work in shutters, posts, plates, rafters, battens,trusses, beams, purlins, bargas, wheel-guards, running boards, frames etc. including supplying at site, handling, hoisting, fitting & fixing in position excluding the cost of bolt and nuts only but including the cost of nails and screws with cost and carriage of all materials complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels). (a) Hard Wood (Mahua / Arjun / Tentul etc or similar quality hard wood.as approved by the Engineer-in-charge)

Supplying at site the following materials including carriage Overhead Charges and Contractor's Profit Long Nuts & Bolts

Coal tarring with 5% pitch including cost of material and labour complete as per direction of the Engineer-in-charge . (b) Two Coat.

Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg).

Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials).NB:- Volume of earth/ sand filled bags should not be less than 0.028 cum/ bag.

Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts.

Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with oil type wood preservative of approved brand & make. (a) Two coats

Cutting and clearing jungles including shrubs, water weeds, bushes,trees, plants, upto 30 cm. girth including removing as directed by Engineer-in-charge.