PROVISION OF BUS SHELTER AT CG ENCLAVE AND TRV CHICOLNA GOA UNDER GE(I)(CG) GOA

Amount

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/disintegrated rock Complete all as specified and directed

Excavation in trenches not exc 1.5m wide in depth for foundation etc or for shafts, wells, cesspits,manholes, pier holes etc not exc 10 sqm on plan and not exc 1.5 depth and getting out in soft/disintegrated rock. Complete all as specified and directed

Material and Labour Cement concrete type D2 1:4:8 (40mm graded aggregate) in foundation, filling and mass concreting Complete all as specified and directed

Form work to sides of concrete foundations, footings and plinth beams Complete all as specified and directed

Form work to sides of columns rough finised square rectangle or polygonal. Complete all as specified and directed

Material and Labour Reinforced cement concrete of M30 grade as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and Labour Reinforced cement concrete of M30 Design mix concrete using 20mm graded aggregate as in columns, pillars, piers,posts and struts complete all as specified and directed.

Material and Labour TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spiraly for hooping for columns , hooking ends and binding with and including mild steel wire (anneald) not less than 0.9mm dia Complete all as specified and directed

All as per item no 8 above but 6mm to 8mm Complete all as specified and directed

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ens, each scrwed end to be fitted with washedrs and one hexagonal or square nut, exc 22.5cm long and not exc 30cm long Diameter of neck 16 to 20mm Complete all as specified and directed

Material and Labour Precast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate woth solid blocks exc 10cm in width and setting in cement mortar1:6 Complete all as specified and directed

Material and Labour Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and as directed

Material and Labour Preparation of new plastered surfaces and applying two coats of cement basedpaint over a coat of alkali resistant priming paint complete all as specified and directed

Supply and Fix Rolled mild steel section as in steel work in tubular trusses including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to I .S .1161-1979Fe-410-W grade E-250 Quality'A' complete all as specified and directed.

Supply and Fix Plates (plain or chequerred) channels,square cut or notched (ordinary and countersunk with riveted,bolted or welded attachment Fe-410-W grade E-250 Quality'A' Complete all as specified and directed

Supply and Fix Rolled mild single stanchions of square hollow section with flange plates,caps,bases,splices ,angle brackets, cleats and other connections Fe-410-W grade E-250 Quality'A' Complete all as specified and directed

Supply and Fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength 550Mpa as in roof covering/cladding to wall fixed with self tapping screws Complete all as specified and directed

Material and Labour for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and directed

Material and Labour Hard core of gauge not exc 63mm ,deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface Complete all as specified and directed

Material and Labour for 75mm thick cement concrete Type C2 1:3:6 (40mm aggregate) as in plinth protection Complete all as specified and directed

Material and Labour for 100mm thick cement concrete Type D2 1:4:8 (40mm aggregate) as in sub base of floors Complete all as specified and directed

Material and Labour for 100mm thick cement concrete Type B2 1:2:4 (40mm aggregate) as in floors in panels Complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing Complete all as specified and directed

Material and Labour pre cast cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in kerb stone and setting in CM 1:6 complete with joint to match. Complete all as specified and directed

Material and Labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment Complete all as specified and directed

Sand fiiling under floors or in foundation including watering and consolidation Complete all as specified and directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc SS RAIL bench for sitting purpose for students inside bus stop , including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. including all fittings and necessary items Complete all as specified and directed

M/s RAJ CONSTRUCTION (BID ID -3269369)

M/s Gayatri Contruction Co. (BID ID -3271981)

M/S P S BABU (BID ID -3269564)