At KXJ - Construction of type-III quarters 2 Block under the jurisdiction of DEN- V/LMG

Item Breakup - A-CPWD DSR 2023 ITEMS

88 mm, weighing not less than 190 gms. 18.0 WATER SUPPLY 18.4S PP-R PIPES LUMDING DIVISION-ENGINEERING/N F RLY Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including 18.4 all PP - R plain & brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. ( Internal Exposed on walls ) 83 18.4.1 PN - 16 Pipe, 20mm OD (SDR-7.4) Metre 90 272 24480 84 18.4.2 PN - 16 Pipe, 25mm OD (SDR-7.4) Metre 180 318.35 57303 85 18.4.3 PN - 16 Pipe, 32mm OD (SDR-7.4) Metre 90 362.9 32661 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including 18.6 all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in- Charge. External work 86 18.6.2 PN - 16 Pipe, 25 mm OD (SDR-7.4) Metre 180 265.05 47709 87 18.6.3 PN - 16 Pipe, 32 mm OD (SDR-7.4) Metre 90 316.25 28462.5 88 18.6.5 PN - 10 Pipe, 50 mm OD (SDR-11) Metre 72 450.95 32468.4 89 18.6.6 PN - 10 Pipe, 63 mm OD (SDR-11) Metre 48 597.75 28692 90 18.6.8 PN - 10 Pipe, 90 mm OD (SDR-11) Metre 30 975.3 29259 18.7S C.P.V.C. PIPES Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 91 18.13.1 25 to 40 mm nominal bore Each 10 911.9 9119 92 18.13.2 50 to 80 mm nominal bore Each 10 1785.35 17853.5 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 93 18.17.2 32 mm nominal bore. Each 5 689.6 3448 94 18.17.3 40 mm nominal bore Each 5 826.1 4130.5 95 18.17.4 50 mm nominal bore Each 15 1026.65 15399.75 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.2 45 cm length 96 18.21.2.1 15 mm nominal bore Each 50 97.75 4887.5 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 97 18.22.2 150 mm diameter Each 12 222.35 2668.2 18.23S C.I./DUCTILE IRON PIPES & SPECIALS Providing flanged joints to double flanged C.I./ 18.30 D.I. pipes and specials, including testing of joints : 98 18.30.1 80 mm diameter pipe Each 2 215.1 430.2 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber 18.31 insertions etc. (the tail pieces if required will be paid separately) : 18.31.1 100 mm diameter 99 18.31.1.1 Class I Each 2 4791.2 9582.4 LUMDING DIVISION-ENGINEERING/N F RLY Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and 18.46 making long screws etc. complete (New work) : 100 18.46.4 32 mm nominal bore Each 5 489.05 2445.25 101 18.46.5 40 mm nominal bore Each 5 631.3 3156.5 102 18.46.8 80 mm nominal bore Each 2 1207.95 2415.9 18.48 Providing and placing on terrace (at all floor Per 12000 11 132000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable 103 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 104 18.49.1 15 mm nominal bore Each 25 506.8 12670 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 105 18.53.1 15mm nominal bore Each 30 574.3 17229 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.65 Providing and fixing PTMT soap Dish Holder Each 12 111.45 1337.4 having length of 138mm, breadth 102mm, 106 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb 19.32 shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) Each 2 26861.9 53723.8 107 bricks of class designation 7.5 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 300 495.05 148515 108 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) LUMDING DIVISION-ENGINEERING/N F RLY For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 450 598.6 269370 109 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 155 1176.8 182404 110 (weight not less than 10kg/sqm) Total 10790162.88

Item Breakup - B-CPWD DSR 2023 ITEMS